Shadowing-Übung: An Animated Introduction to Vibration Analysis by Mobius Institute - Englisch Sprechen Lernen mit Video

Übungsmodus wählen

Jeder Modus öffnet einen Übungsraum im Vollbild.

520 Sätze

Wenn Sätze zu kurz oder zu lang sind, klicke auf Edit, um sie anzupassen.

Hello and welcome to this webinar an animated introduction to vibration analysis.

My name is Jason Tranter the CEO and founder of Mobius Institute.

Very briefly I've been involved with vibration analysis for over 30 years living

and working in Australia and the United States and I've been involved over

that period of time in vibration analysis condition monitoring

and reliability improvement both doing the work developing monitoring systems

and for the last almost 20 years providing training in the field and

so my company Mobis Institute I'll just take a brief moment to say

we offer training in the areas of reliability improvement lots of

training in the area of vibration analysis almost 4 000 people

a year all across the world in 60 70 countries the students come from we offer certification

that is accredited to the iso standards

and we also run a conference called the international machine vibration analysis

and condition monitoring conference we run that conference in the united states australia singapore

which at the time of this recording is coming up in just over a week and in Europe.

And yes, we have offices and training centres all over the world.

So let's talk about vibration analysis.

You know, equipment failure happens.

I'm sure if you're listening to this, you're already well aware of that fact.

The question is, how do we avoid it?

How do we catch signs of the bearing failing

or anything else failing via vibration analysis so that we can manage the repair process? we can plan and schedule that process.

So the good news is that when we're dealing with rotating machinery like this, as the rolling elements roll around inside the bearing,

they make a certain vibration that the forces involved create a certain vibration pattern when there's a problem.

When there's not a problem, actually they don't really create any vibration for the most part.

The same can be said for timing gears

or normal gears in a gearbox as those teeth there mesh together they create a vibration pattern

and if there's a problem with the misalignment with the teeth

or anything else it creates a vibration pattern and

that goes for almost every rotating component in the case of our more sophisticated gearbox the compli the vibration

I should say is more complicated but we can still diagnose an awful lot from a machine like this even complicated

wind turbines that can vary in speed that can have very complicated gearboxes

and low speed bearings high speed bearings you name it vibration analysis lets us see inside the machine

so to speak so that we can tell exactly what's going on we can detect the changes

and then decide what to do about it when we see the changes.

So I mentioned a moment ago that vibration lets us see inside the machine, so to speak.

So if you just listen to a machine, it might make a sound like this.

And hopefully you can hear that okay, and the pump may make a certain sound.

That's not a very healthy sounding pump.

But what vibration analysis allows us to do is break

that sound up into all its individual components because those individual frequencies actually relate to different components within the machine.

And as those frequency components change, it provides an indication of whether there's a problem with the bearings

or the rotor bars or the shaft which can be misalignment, unbalance or anything like that.

Now I'm just simulating the sounds.

They'd be actually more pure than that in reality.

But if there was a problem with the bearing, okay, we're just listening to it.

But the vibration pattern would change.

If there was a problem with the alignment, balance, if the shaft was bent or something like that, we would see it.

If there was a cavitation problem.

well we would be able to detect that through vibration analysis as well

and if there's a problem on the machine head I wish all machines made

that sound but yes we could detect that too yes okay

so imagine what we're going to do even though

when we look at a machine we don't see it moving like

that we pop a sensor on top of the machine and

that periodic motion you can see the machine sort of vibrating up and down creates a, a Simple signal.

That little sine wave you see there has an amplitude and frequency.

And of course, if the problem got worse, then it's a bigger waveform.

And in this case, it's actually going up and down more slowly.

So it's a different frequency.

But we can learn an awful lot from a simple signal like that.

But in reality, of course, the vibration from a machine is more complicated.

So let's take a little bit more of a look at how we collect the data just briefly.

So there's our machine.

Now as I mentioned before, you know the motor makes certain vibration, the pump makes certain vibration.

And what's actually happening is as the shaft turns there's magnetic forces in here,

electromagnetic forces, there's the bearing vibration, the fan vibration, the vibration of the rotor bars and

so on and all of that transmits along and goes up through the bearing to the housing.

So up through the bearing to the housing and so on.

So we literally place this vibration sensor that converts the vibration into an electrical signal into our measurement device.

So in the case of a portable vibration analyzer, we can walk from machine to machine,

pop it on top and either get a simple readout of vibration

or a more sophisticated spectrum which you can see very simply depicted there.

But one little thing to understand is a machine like that actually vibrates up and down.

It vibrates side to side, so we need to measure that sideways motion.

And it actually also vibrates end to end, i .e.

axially.

So it really helps to get the vibration from the three axes,

if we can, that way we can tell exactly what's happening with the machine.

Often you can get away with just a horizontal measurement and an axial, but the fact is that with different sorts of machine faults,

the vibration changes in different ways in different axes and

so that's why we like to measure on different bearings ideally on both bearings of the machine component

and in different axes

if we possibly can to get the full picture of the machine vibration you know

if this bearing had a problem the vibration may not transmit through the shaft to this bearing particularly

if it was a flexible coupling or something like that so instead we we

We take our measurement here, we take our measurement there, and then we get the complete picture.

So this is a very simple view of what the vibration is all about.

So imagine the shaft within the machine in a very simple example like this.

We're depicting the machine having unbalance.

So the shaft is actually trying to move in a circular motion.

We're looking axially along the shaft here, so the shaft's in profile.

And imagine if you could just get a dial indicator, place it up against the shaft, and see that motion.

So of course if it was safe, and it was moving slowly like that, and it had that much amplitude,

and we could trace out that variation in displacement, we would see that sine wave

that we saw just before now we can look at different sorts of vibrations

so for example

if it had fan blades as well then this vibration

we're seeing now may be the vibration just due to the the blades of the fans

100

so with each rotation of the shaft you know we've got six blades there

101

so we get six times as much vibration

102

or I should say the frequency is six times as much

103

and if we consider the reality of a situation like

104

that where we're seeing the motion of the shaft

105

and the vibration due to the fan blades well

106

we get the two added together

107

now as you can see it's becoming a little bit complicated this is actually called the time waveform

108

and we'll look a bit more closely at the time waveform a little later you know

109

if the machine speeds up the frequency changes it goes up if the machine slows down then the vibration changes.

110

In this example the amplitudes didn't change but the frequencies change

111

because it's going slower and of course we could change the amplitudes as well.

112

Now in reality well actually with some machines with fluid film bearings,

113

journal bearings, we can actually take a displacement measurement you know it's a sensor there

114

that can detect that distance but otherwise you know for normal walk around balance of plant machines we use the accelerometer

115

So, okay, we've seen this vibration.

116

Let's look at that in a little bit more detail.

117

So here's a machine, and let's just assume that we're going to take some measurements on the bearing there.

118

So, if we were to look at the vibration in reality, it could be really quite complicated.

119

Now, this is a simulated little signal here, but the signal tells us an awful lot.

120

That raw vibration, that time waveform there does tell us a lot.

121

But let's just go back to basic principles.

122

Let's keep it really simple and just say, let's break up that vibration into its raw components because by doing so,

123

we can explain or describe the most common type of presentation of vibration information and that's called the spectrum.

124

And that's what most vibration analysts look at every day.

125

But it really helps if you understand where the spectrum came from.

126

So, let's have a look.

127

Imagine, if you will, that that motion you can see there in the animation from the shaft turning

128

Now just for the sake of this demonstration, you can even see the shaft is bent

129

Once per revolution it makes that cyclic motion

130

It would make a similar motion if it was out of balance as well

131

So there's our little simple sine wave

132

And we can speed up the machine a bit, you know, make it a bit more interesting sine wave

133

Okay, so that's one source of vibration.

134

And if it was out of balance, there'd be a lot of vibration.

135

And if it was, you know, perfectly balanced, there'd be just a tiny bit of vibration.

136

So there's one source.

137

And this is all being measured right off that bearing there.

138

What I'm going to simulate is the situation we saw just a moment ago.

139

I'll just give that a bit more vibration.

140

With the fan.

141

Now, it's an orange fan.

142

So let's make some orange vibration.

143

Let's say there were 14 blades on the fan, I forget how many there are actually,

144

but we get then 14 little pulses of vibration for every rotation of the shaft.

145

Now we're not measuring over here, this vibration that's generated because there's something maybe the blades are bent or something like that,

146

that vibration transmits through to the shaft up here to our measurement location.

147

Now, in addition to the fan vibration and the shaft vibration, so the grey shaft creates this grey vibration, the orange fan makes the orange vibration,

148

well the green bearing, just to really simplify things, it also creates vibration.

149

Let's just turn off the other one so it's a bit easier to see.

150

And this is the green vibration from the bearing.

151

Now, as I mentioned a moment ago, if the bearing is in tip -top condition, then we don't expect to see any green vibration

152

when you start to see some green vibration you say oh wait a minute there's something wrong with the bearings

153

if the vibration gets worse and worse and worse at

154

that frequency which is different to that frequency and it's different to

155

that frequency they generate different frequencies

156

and you know depending on how bad the problem is we can see higher or lower amplitudes.

157

Unfortunately, it's more complicated than this.

158

Not only do bearings create a very different vibration pattern for that, but in simple terms, they do have their unique frequency.

159

But what we measure is the combination of the gray, the green, and the orange vibration,

160

which looks something like that that more complicated squiggle line there the time waveform is the combination of all those motions

161

and so that's what the vibration analyst gets out of

162

that sensor that's placed on the bearing

163

and it's like okay what can we do with

164

that well let's take

165

it a step further what we're seeing here is an overlay of those three sources of vibration

166

that we've been talking about you know the shaft the bearing

167

and the fan what I'm going to do is look at

168

that in three dimensions

169

so there is time along here as time passed by the machine vibrated up

170

and down and it you know vibrated because of the bearings

171

and it vibrated because of the of the fan I'm just gonna back

172

that off just a little bit there

173

so that's what happened over a period of time the up and down or y -axis is the amplitude of the vibration.

174

But each of these represents a frequency.

175

And our spectrum, which is the most common tool used by vibration analysts, is as if we look at the vibration from this axis.

176

You can hopefully see my mouse moving.

177

And so if I change the speed of the machine, you can see the waveforms all change in frequency.

178

If I change the amount of fan vibration, you can see that one go up whoops I went too far

179

and and you can see the changes or the unbalanced vibration let's say

180

So what I'm going to do now is change my view of this data from this angle, and that is the spectrum.

181

And if I just take a little bit of a better view of it, there again is the vibration just due to the shaft turning.

182

There it is due to the bearings, and there it is due to the fan blade vibration so

183

if my original measurement on the machine looked like that

184

and then the next time I tested it looked like that

185

and the next time I tested it looked like

186

that I'd say well that once per revolution vibration probably due to unbalance is increasing

187

if my original vibration looked like that there's no bearing vibration

188

and the next time there was more

189

and then more I'd start to become concerned

190

that the bearings were going to fail and now with

191

that early warning I can go and start the the planning process to replace

192

that bearing so

193

that it can be ordered you know it's a rather nice having to keep

194

it in our own spares inventory we can order

195

it from the vendor have it here in plenty of time

196

plan the job keep the job find the right people

197

and tools and all those are the things that we want to do

198

so that there is the basics of the the spectrum

199

which as I mentioned is the most powerful tool in vibration

200

but we can go further

201

so let's do go further first you know the different fault conditions do present different patterns

202

so you know this little very simple

203

and idealistic looking spectrum is just a peak rather than talk

204

about it in terms of frequency vibration analysts often talk in orders 1x just simply means

205

it's 1 times the speed of the machine

206

so unbalance as we've just learned happens at the running speed of the machine

207

so we call it the 1x peak so

208

if there was unbalance we expect that peak to increase in amplitude it turns out

209

that if the machine is misaligned now this is all just very simplistic for the moment, we might see a pattern like that.

210

The 2x vibration.

211

The vibration at twice running speed will increase.

212

There may be some vibration at three times.

213

If the bearing was loose in the housing, let's say, or there was excessive clearance,

214

then we get a whole lot of peaks and the bottom of the graph lifts up.

215

If we had a fault with the bearings, okay, there's that that green peak we talked about

216

but it's really common to see a peak at twice that frequency BPFO that should say three times and four times.

217

We can have a problem called resonance and that might also make

218

that peak go up but the base of the peak broadens out.

219

Anyway the key takeaway here is

220

that the spectrum tells us about the nature of the fault

221

and the severity of the fault and we can take

222

that information we can watch how the vibration is changing

223

and then we can make the recommendation

224

that you know does the bearing need to be replaced is

225

it a problem with damaged rotor bars is the problem with the coupling is there a problem with the foundations

226

I mean all kinds of problems can be detected this way

227

now we need to talk about another aspect of vibration analysis

228

and that's what we can learn by detecting very high frequency vibration

229

because it turns out that

230

when the bearings just start to fail we can't see any sign of

231

that failure using a normal spectrum instead

232

if we tune our vibration monitoring system to a very high frequency

233

and we go through some transformations

234

which in case you've heard about it could be called demodulation

235

enveloping shock pulse HD peak view spike energy HFD Swan C you know there's a lot of different technologies

236

that utilize the fact that if for example we had some damage in the outer race

237

if it don't go to a bigger picture of it

238

if we had some damage like a little ball

239

or a little crack

240

or even a subsurface defect each time one of the rolling elements rolls over the top

241

we get this ping of vibration it's very quick

242

it rushes through the metal of the machine it's very low amplitude

243

so it's hard to detect very high frequency

244

but the vibration analyzer can pick it up

245

and it can provide a pattern to the vibration analyst to give them

246

that very early warning and then we can you know monitor the progress of

247

that fault you know

248

if it's a very critical machine perhaps high speed high load it could fail quite quickly

249

or we hey we could get a year

250

or more warning of a problem like this and therefore we can plan

251

and schedule you know to suit our production requirements and so on But if you watch, there's a certain periodicity to this.

252

See, ping, ping, ping, ping.

253

Well, it turns out that if the damage was on the inner race of the bearing, you can see it's a different frequency.

254

Ping, ping, ping, ping, ping, ping.

255

That's called the ball pass inner race frequency.

256

It's a different frequency.

257

And if there's damage on the rolling elements themselves, then it's a different frequency again.

258

And that's why a vibration analyst doesn't just say, oh there's you know the there's bearing damage the analyst can

259

actually say whether it's on the inner race outer race

260

or the rolling elements now it's not that you're going to go

261

and buy a new set of rolling elements

262

or a new in a race or something like that

263

but knowing that information can really help in the planning

264

and scheduling process and hey

265

if you've got big expensive bearings people have been known to

266

you know in this instance to actually just rotate the outer race to take

267

that damaged area out of the load zone

268

because it's quite common to have failures down in this area because it's under so much load for a horizontally oriented machine.

269

Anyway, moving along.

270

So we can use that information and detect faults quite early.

271

Now I just want to briefly mention that there is another approach to vibration analysis.

272

I just want to briefly sort of summarize a few things

273

so if this was our spectrum what I'm doing is it's kind of simplifying things

274

and this this frequency scale it's sort of log with me you know ten thousand twenty thousand

275

so we tend to get this very high frequency vibration out here the stuff

276

we were just talking about we get some peaks down low

277

and those peaks often relate to problems like unbalance misalignment looseness

278

and so on

279

and then often in this sort of mid -range frequency in fact

280

we can sort of divide it up into low mid high

281

and very high frequencies we might get a different set of faults you know problems with the impellers

282

and blades and so on

283

and then higher frequency problems with gears the rotor bars the stator slots now there's other faults

284

that have higher frequency and then we can get into lubrication faults and

285

and very high frequencies you know cavitation lubrication bearing damage

286

now there is a way just to get started with vibration analysis

287

that rather than using the more sophisticated spectrum we can just take this this velocity overall level vibration

288

and it just kind of says well hey without going into any detail of what's going wrong with the machine

289

we can just talk about the actual vibration amplitude

290

we can focus on just the low frequency vibrations let's just get rid of those little messages,

291

by focusing on the vibration in units of displacement, or units of acceleration focuses on the higher frequencies,

292

and we can even go into the very high frequencies as a single reading

293

to tell us what's happening with lubrication and bearings and so on.

294

So we can have this simple reading just to trend.

295

It gives us an idea of what's going wrong, but none of the real details.

296

So let's keep going.

297

So, so far we've learned

298

that the spectrum does break all those frequencies up into their individual components so that we can see faults like, you know, specifically unbalanced, misalignment,

299

looseness, foundation problems, and so on and so forth.

300

Now, that's great, but time waveform analysis gives us a perspective of what's happening

301

that you can't really get from the spectrum alone.

302

So imagine in this case, if you ever recorded your voice and looked at that waveform from your voice,

303

this is sort of what we're talking about.

304

This is what is happening from moment to moment.

305

So, in this instance, you can see these damaged gear teeth.

306

so there's the vibration

307

so in here in here in between those spikes in other words that's the vibration

308

when the good teeth go through the mesh but

309

when this these chipped teeth damaged teeth go through the mesh we get this big spike

310

so once per revolution we see a big spike

311

because there's only one area of damaged teeth

312

so I can look at this I can look at the the G's level the sort of peak acceleration level

313

and I can detect the severity of the problem

314

and I can see things that are very hard to see from a spectrum alone

315

so time -way form analysis really complements

316

the spectrum analysis and vibration analysts that are sort of masters of their domains

317

so to speak you know i would like to think they would use this time waveform analysis

318

and you know it's just the same thing we saw before it's just taking

319

that that vibration and breaking it down into you know the you know

320

but rather than breaking it down

321

and just looking at the spectrum we can look at the raw waveform all by itself

322

so again you know if we

323

if we had a fault for example with the rolling elements well there it is

324

and we see something curious in this case

325

because as the balls roll into the load zone there's more force down there

326

and we get this bigger pulsations when the

327

when the damaged balls roll around up out of the load zone up at the top of the bearing

328

then we get weaker vibration

329

so the top of the bearing represents where the amplitude is small in

330

that pulsating waveform at the bottom of the bearing for a horizontally oriented machine we get the bigger pulses now

331

that does translate into a certain pattern in the spectrum

332

but we can see it beautifully clearly in a time waveform as the gears mesh together ideally

333

that force would be uniform but

334

if you look closely at the animation you can see

335

that this is actually eccentric or it could be bent

336

so the force in that mesh gets stronger and weaker stronger

337

and weaker and we can see

338

that in a time waveform as well those pulsations

339

you can see occur as the teeth go into sort of

340

a stronger mission a week in mission a stronger mesh

341

so it really complements what the analysts can do with the spectrum alone

342

and in this instance we've got the the excessive clearance in the bearing

343

and we can see it rattling of course my animations really exaggerate things

344

but we get a time waveform with these great big spikes you know in

345

that instance it might have been once per revolution maybe

346

and we'll see you know bang bang bang bang bang all those spikes yes in the spectrum

347

we see all these peaks they're called harmonics it's very common in this case

348

but it's really good to be able to look at the time waveform as well

349

and there's our tooth damage which one we saw earlier.

350

But that waveform is what it should look like.

351

Now, the amplitude looks really high.

352

It's just that the scale is different.

353

So that vibration is just kind of normal vibration, low amplitude even though it's been made to look bigger.

354

So if we saw a waveform like that, who cares?

355

It's telling us that everything's cool.

356

Now, there's one more form of vibration analysis.

357

In fact, I'm going to tell you that two more, but there's one more that's really helpful and that is phase analysis.

358

It tells us about the motion of the machine as it responds to the damage within the machine.

359

So for example, if we had unbalance or misalignment, eccentricity, bent shaft and the other faults that you can see there,

360

it actually causes the machine to move.

361

It may rock from side to side,

362

bounce up and down, move axially back and forth and we can see specific sort of movements in the bearings themselves.

363

And so rather than just looking at the spectrum, we can look at these phase measurements that give us an idea of the motion.

364

We can do it in a couple of ways.

365

This is the more difficult way.

366

We put a piece of reflective tape on the shaft.

367

We use this to detect the once per revolution vibration, and we compare the vibration patterns from a timing point of view.

368

Look, that's just the complicated way.

369

You can use strobes as well, but by putting an accelerometer, two accelerometers on the machine, in this case, one measuring vertically,

370

one measuring horizontally, we can see how that bearing is moving.

371

Is it moving in a circular motion or is it more elliptical or side to side or up and down?

372

We can tell.

373

And there's an awful lot we can learn we can take these phase readings

374

so they are values between 0 and 360 you know a circle has 360 degrees

375

and we use these these diagrams

376

so for example rather than just looking at all these complicated numbers we can use a little symbol like

377

that this little tail points off it's like a compass

378

so this is pointing off at 18 degrees this is pointing off at 21 degrees now that's all sounds complicated

379

but all that means because they're basically pointing in the same direction

380

that just means that both ends of this machine are moving up

381

and down in phase with each other

382

they're both moving up together down together in some fault conditions

383

we'll get one end of the machine moving down as the other end of the machine moves up

384

or it may move down on one side of the coupling

385

at the same time as it's moving up on the other

386

when there's misalignment so this all may seem a little complicated it's just worth knowing

387

that measurements like this exist that for example here you can see

388

that these ones are pointing down well it's sort of down at

389

that 45 degrees that's not 45 but if i compare this one to

390

that one you can kind of see that there's about 90 degrees between these two and we only see that with unbalance.

391

It might seem strange you know because it's moving in a circular motion

392

and so on why wouldn't that always be the same?

393

Well with misalignment and just about every other fault condition we see different motions of the machine.

394

So now we have another weapon at our disposal.

395

We can use the spectrum which gives us an indication of the fault condition and the severity.

396

The time waveform provides extra detail and in certain circumstances it provides really important detail.

397

And with certain fault conditions to tell, hey, is it misalignment, is it out of balance, is it resonance, is it looseness?

398

There's just these faults

399

that can kind of look the same with the spectrum

400

this phase analysis helps us pinpoint exactly what's wrong with the machine

401

so we only need to do this

402

if we're really not sure what's wrong with the machine

403

but we're pretty sure something's wrong so it's a really useful tool

404

so in this instance this is a rotor

405

that we call it static unbalance it's just like I add a balance in one plane

406

if we look at this motion we see you know

407

if we if we look at that both bearings are moving up

408

and down together that's in phase

409

if we look at this bearing here you can see it's moving in a circular motion

410

so we can draw those little symbols

411

and say yep end to end it's in phase from vertical versus horizontal

412

there's a 90 degree change okay I'm not trying to teach you vibration analysis just show you

413

that these measurements can be put to good use

414

this is a more complicated situation where we have a longer road out of balance

415

but actually this bearing is still moving in a circular motion it's just

416

that from one end to the other it's not either perfectly in phase

417

or perfectly out of phase

418

it tells us how severe the problem is though it tells us how we need to go about balancing

419

this machine in this case we've got an overhung rotor

420

and we see something else that's curious not only is

421

that rotor actually trying to move in a circular motion it's actually rocking back

422

and forward which creates an axial force in this direction

423

so we take our phase readings on the sides of these bearings

424

and we can tell what's wrong with

425

that fan in this case this machine as you can see is slightly misaligned

426

I sure hope your machines don't look like that

427

but hey I just have to exaggerate the animations but imagine now

428

if you can see there that if I took a vibration reading here

429

and here at the same time the motion is

430

that they are out of phase with each other and

431

that will tell us okay the machines misaligned with axial misalignment we get

432

or angular misalignment we get an axial force and again phase would confirm

433

that hey here we've got the inner race of the bearing

434

and perhaps it's been hammered into place it's cocked on the shaft

435

that will cause the bearing to fail but we can use phase analysis

436

and tell that that's the problem

437

because from pure spectrum analysis it's hard to tell now just in case you work in oil

438

and gas or power generation

439

or other applications where you have critical machines with fluid film bearings

440

there is another type of vibration reading we use called orbits analysis

441

so particularly for large turbines it's critical

442

that we understand how this is moving as it rotates

443

and we we want to know

444

you know what's happening at the bearings is it moving in

445

a circular motion is it is the shaft in the correct

446

position within the bearings there's all this complicated stuff we need to know and the orbit

447

tells us that

448

so we're actually using two proximity probes two displacement probes to tell us about the radial motion

449

and we use another proximity probe commonly called a key phaser

450

which is in a position to pick up a once per revolution event in this case a keyway

451

and with this timing information

452

and these two probes we can tell exactly what's happening with the rotor where it is inside the bearing

453

which is really important

454

and is it moving in a circular motion a large circular motion during due to unbalance a small circular motion

455

because it's properly balanced is it elliptical and highly elliptical

456

because of preload from misalignment or something like that there's so much we can tell

457

when the machine goes through its first critical

458

and maybe second critical speed it will actually flex not quite as much as what we're seeing here

459

but our orbit measurements

460

tell us what's going on so basically if this was a very exaggerated end view of that rotor we are

461

very interested to know what the center of the shaft is doing

462

and so we can see it now it's it's drawn out this orbital motion

463

and that's actually what those two proximity probes give us

464

when we look at an orbit now just for illustrative purposes

465

we've got orbits at different points along the machine we wouldn't necessarily have probes at those locations

466

but anyway just for illustrative purposes the little orbit diagram tells

467

us how the machine's moving how much the the rotor is moving relative to the bearings

468

or relative to the probes and and the phase relationship

469

and other really useful information anyway

470

if you ever hear about orbits

471

this is what it's about we we have two probes

472

I'll just slow the rotor down put our little probes on

473

there now the probes could be located at this location

474

or this location or other locations the key phase it can be mounted in different places

475

but anyway depending on the vibration pattern

476

and the forces on the machine we will see different shapes

477

so for example we may see more vibration actually I would probably say more vibration in the x -axis

478

because of the loading

479

and maybe it's got elliptical bearings we can see interesting sort of phase relationships hey

480

we can see all kinds of things depending upon what's happening with our machine it's a really useful measurement

481

and there are other measurements we can take on these sorts of machines as well anyway

482

this is just to sort of I guess open your eyes to all the sorts of measurements

483

we can take depending upon the type of machine

484

and what it is we're trying to learn so rather than looking at just a very simple

485

overall level vibration

486

which gives us a very crude idea of of how the vibration is changing the spectrum the time waveform phase and

487

if appropriate the orbit measurement really helps us to understand what's happening inside the machine

488

it puts us back in control okay

489

it doesn't necessarily stop the machine from developing the fault in the first place

490

that's for a different discussion about reliability improvement

491

but vibration analysis gives us an insight and now we can decide you know

492

if there's something we can change about the way the machine's being operated

493

if there's something simple we can do to alleviate the problem to extend the life of the machine

494

or we can start planning the maintenance it's much better to do it

495

that way than to find out oh gosh we've got another problem I've machine just failed

496

or it's gonna fail soon and now that's an extremely costly process

497

because of the spares

498

we have to keep the downtime the potential safety risks all the extra maintenance work

499

that's going to be required to deal with it vibration lets us get the information

500

we need to make those important decisions

501

so in conclusion vibration analysis is very powerful it provides an indication of the nature

502

and severity of the fold condition and it has been used in every industry all over the world for many years

503

but I would like to reinforce

504

that vibration analysts should not rely on just one technique alone like the spectrum is useful but there are other tools

505

And it's worth saying also at this point that there are other condition monitoring technologies.

506

Looking at the oil samples for maybe the quality of the oil, the condition of the oil, but also are there any wear particles,

507

any little bits of metal because the gears or bearings are damaged.

508

We can listen and analyse ultrasound.

509

We can perform special tests on the motors.

510

We can look at temperature there are other ways to assess the condition of the machine.

511

But it is essential that the analyst understand the machine, the analyzer, the vibration measurement system.

512

the failure modes as they're called, the fault conditions themselves, and the plant's business philosophy.

513

I mean, particularly when it comes to the idea of condition -based maintenance, but just understanding what the company is trying to achieve.

514

On one hand, we can just say, we're just going to measure the vibration, see it change, and then say,

515

okay, the machine needs to be taken out for repair or overhaul.

516

On the other hand, we can do a Spock mind meld with the machine

517

and truly understand why the vibration changes when the condition of the machine changes.

518

And that totally transforms what you can achieve with vibration analysis.

519

Anyway, enough said.

520

I hope you have found this presentation or this webinar useful and I look forward to answering any of your questions.

App herunterladen

Alles, was du zum fließenden Sprechen brauchst

KI-AussprachebewertungJeder Satz bewertet

IPA-TrainingJeden Laut meistern

WortschatzBaue deinen Wortschatz auf

VokabelspielSpielend lernen

QR scannen

Download on theApp Store Get it onGoogle Play

Gleicher Kanal

Private Onsite Training: Expert Instruction at Your Facility | Mobius Institute

Business EnglishWorking Adults

FOR YOU

Empfohlenes Video

197 Sätze

Wortschatz und Sprechhinweise zu dieser Lektion

Diese Sprechübung basiert auf dem Video „An Animated Introduction to Vibration Analysis by Mobius Institute“. Diese Wörter kommen am häufigsten vor: vibration, machine, bearing, analysis, frequency. Dieses Video enthält 520 Sätze und 6449 Wörter zum Nachsprechen. Der gesprochene Teil dauert 40:50. Der Sprecher spricht in natürlichem Tempo, etwa 158 Wörter pro Minute, ähnlich wie im Alltagsgespräch. 83 % der Wörter gehören zu den 3.000 häufigsten im Englischen; den Rest solltest du dir vor dem Üben ansehen.

Wichtiger Wortschatz in diesem Video

15 lernenswerte Wörter aus dem Video, mit Aussprache und Bedeutung:

Wort	Aussprache	Bedeutung
vibration Substantiv	/vaɪˈbɹeɪʃən/	Vibration, Schwingung
frequency Substantiv	/ˈfɹiːkwənsi/	Häufigkeit, Frequenz
spectrum Substantiv	/ˈspɛktɹəm/	Spektrum
bearing Substantiv	/ˈbɛɹɪŋ/	Lager
shaft Substantiv	/ˈʃɑːft/	Schaft
measurement Substantiv	/ˈmɛʒ.ə.mənt/	Messung
complicated Adjektiv	/ˈkɑm.plɪˌkeɪ.tɪd/	kompliziert, umständlich
ping Verb	/pɪŋ/	pingen
circular Adjektiv	/ˈsɜɹ.kjə.ləɹ/	Kreis-
detect Verb	/dɪˈtɛkt/	entdecken
blade Substantiv	/bleɪd/	Klinge
orbit Substantiv	/ˈɔɹ.bɪt/	Umlaufbahn, Orbit
component Substantiv	/kəmˈpoʊ.nənt/	Komponente
gear Substantiv	/ɡɪɚ/	Ausrüstung
monitor Substantiv	/ˈmɑ.nɪ.tɚ/	Aufpasser, Wächter

Phrasal Verbs, die du hören wirst

Wort	Aussprache	Bedeutung
go up Verb		hinaufgehen, steigen
turn out Verb		sich herausstellen als/dass, sich erweisen als
speed up Verb	/spiːdˈʌp/	beschleunigen
find out Verb		herausfinden, erfahren
get away with Verb		mit etwas davonkommen, mit etwas durchkommen
lift up Verb		heben, erheben
look forward to Verb		sich freuen auf
pick up Verb		aufheben, aufnehmen

Sätze zum Wiederholen

Kurze, vollständige Sätze aus dem Video, die du im Alltag wiederverwenden kannst:

The question is, how do we avoid it?
We're depicting the machine having unbalance.
I'll just give that a bit more vibration.
It's telling us that everything's cool.

Grammatik in diesem Video

Die Strukturen, die der Sprecher am häufigsten verwendet, mit den genauen Worten aus dem Video:

Struktur	Im Video
Bedingungssätze if + Satz, will/would + Verb – eine Bedingung und ihre Folge	if it was out of balance, there'd be
Present Perfect have/has + Partizip Perfekt – eine vergangene Handlung, die jetzt noch wichtig ist	I've been involved · we've seen · we've just learned
Passiv be + Partizip Perfekt – wichtig ist, was geschieht, nicht wer es tut	I've been involved · is accredited · can be said
Relativsätze who / which + Satz – eine Zusatzinformation über eine Person oder Sache	shaft which can · frequency which is · spectrum, which is

Aussprache, auf die du achten solltest

Der Sprecher verwendet 73 Kurzformen und abgeschwächte Formen, zum Beispiel we're, we've, I'm. Sprich sie in der kurzen Form, so wie du sie hörst.

Die Laute „sh“ und „zh“: vibration /vaɪˈbɹeɪʃən/, shaft /ˈʃɑːft/, measurement /ˈmɛʒ.ə.mənt/, mesh /mɛʃ/, animation /ˌæn.ɪˈmeɪ.ʃən/
Lange Wörter – auf die Betonung achten: complicated /ˈkɑm.plɪˌkeɪ.tɪd/, animation /ˌæn.ɪˈmeɪ.ʃən/, severity /səˈvɛɹ.ə.ti/, indication /ɪndɪˈkeɪʃən/, proximity /pɹɒkˈsɪm.ɪ.ti/

Laute, die Deutschsprachigen schwerfallen:

/w/ — mit runden Lippen, nicht wie das deutsche „w“ (/v/): frequency /ˈfɹiːkwənsi/, weaker /ˈwikɚ/, webinar /ˈwɛb.əˌnɑː/
Stimmhafter Auslaut — /b/, /d/, /g/, /z/, /v/ am Wortende nicht verhärten: complicated /ˈkɑm.plɪˌkeɪ.tɪd/, probe /pɹoʊb/, blade /bleɪd/, bend /bɛnd/, relative /ˈɹɛl.ə.tɪv/
/æ/ — offener als „ä“: analyst /ˈænəlɪst/, bang /ˈbæŋ/, animation /ˌæn.ɪˈmeɪ.ʃən/, axis /ˈæksɪs/, axe /æks/

So übst du mit diesem Video

Höre dir das ganze Video einmal an, ohne zu sprechen, und notiere die Wörter, die du nicht kennst.
Beginne mit 0,75-facher Geschwindigkeit, sprich Satz für Satz nach und wechsle zur normalen Geschwindigkeit, sobald es leichtfällt.
Nimm dich auf und vergleiche mit dem Original; achte dabei auf Wörter wie vibration, frequency, spectrum.

Was ist die Shadowing-Technik?

Shadowing ist eine wissenschaftlich fundierte Sprachlerntechnik, die ursprünglich für die professionelle Dolmetscherausbildung entwickelt und durch den Polyglotten Dr. Alexander Arguelles populär gemacht wurde. Die Methode ist einfach aber wirkungsvoll: Du hörst englisches Audio von Muttersprachlern und wiederholst es sofort laut — wie ein Schatten, der dem Sprecher mit nur 1–2 Sekunden Verzögerung folgt. Anders als passives Hören oder Grammatikübungen zwingt Shadowing dein Gehirn und deine Mundmuskulatur, gleichzeitig echte Sprachmuster zu verarbeiten und zu reproduzieren. Studien zeigen, dass es Aussprachegenauigkeit, Intonation, Rhythmus, verbundene Sprache, Hörverständnis und Sprechflüssigkeit signifikant verbessert — was es zu einer der effektivsten Methoden für die IELTS Speaking-Vorbereitung und reale englische Kommunikation macht.

Shadowing-Technik: die vollständige Schritt-für-Schritt-Anleitung lesen →

Shadowing-Übung: An Animated Introduction to Vibration Analysis by Mobius Institute - Englisch Sprechen Lernen mit Video

Übungsmodus wählen

App herunterladen

Private Onsite Training: Expert Instruction at Your Facility | Mobius Institute

How I use AI to learn engineering (anti brain rot studying)

SVINutes: Pulsatile Tinnitus

Wearing Ease Demystified: The Body Cylinder Approach

Transient Thermal Analysis in ANSYS AIM

Top 10 Welding Defects in Process Piping (Causes, NDT Inspection & Fixes)

Steam Turbine Construction Operating Fundamentals

Executing Monitoring, Evaluation and Learning (MEAL) | Complete Practical Guide

LET THERE BE... Voltage? | Maxwell's Equation #2 Explained for Beginners

Analyze SEC filings with Transformers for fun and profit

How an Agile Coach can help Product Owners

ICT Mentorship 2022 Introduction

The 7 Quality Control (QC) Tools Explained with an Example!