シャドーイング練習: Building my DREAM home network FROM SCRATCH | UniFi Network & Rack Setup - 動画で英語スピーキングを学ぶ

So today I'm taking you guys along as I upgrade my old internet setup.

We're gonna be rerouting all the wires for the new system, setting up a wall -mounted rack, installing a pretty robust security system with motion tracking cameras.

We've got floodlights, sensors, sirens, and everything else involved in building a professional home network from scratch.

So way back when, when I started planning out this setup, I decided to order everything ahead of time so that

when I moved into the new house I could get started and didn't have to wait on it.

Well, one of those items was the snap phone 12U networking cabinet with the glass front panel

and the white finish and everything you want, right?

Well, once I started putting gear in there I quickly realized that it wasn't deep enough for the switch.

So after a couple days of looking at Facebook Marketplace, I found this Tecmojo 18U wall mounted rack which was 23" deep for $200.

Now this rack was plenty big for everything we needed plus plenty of room for expansion.

The only problem is I wanted a white cabinet to fit the setup.

So after getting this cabinet back to the house I quickly got to taking it apart

so we can get it a fresh coat of paint.

Now to paint this the process is going to be simple.

We're going to take each panel, scuff it up with 220 sandpaper.

high performance enamel.

This is the best.

So now, we are going to take everything

and just wipe it off with some rubbing alcohol to get all of the dust off.

We're just gonna have a nice clean surface.

We'll be ready. for paint.

We got all these things wiped down.

We do a little bit of paper here so we don't get paint everywhere.

Go ahead and set that up.

And then I had this Wagner paint tent for a couple years now.

It's just nice to keep the overspray from going everywhere.

But we're going to go ahead and go in here with one nice light dust

and then we'll come back after everything's painted with a nice solid second coat.

All right, we've got the first coat.

I think we ran through a single can of paint.

We still have Three cans left, and I think we should have enough, to be honest.

After two coats of paint on the inside, we went ahead, let it dry overnight, Then flipped everything over since we want both inside and outside white.

Got two coats of paint on that, and then we're finally back to where we started.

Now we've got all of the pieces nice and painted.

We're going to go ahead and assemble this get it together

and then we will mount it to make sure we are good to go.

So I'm lucky glad that that first case didn't work out because with this one, I have a lot more space and more room to grow.

So if I want to add more equipment, I can do so later on instead of just being limited.

to the 12 user space.

the previous one.

Alright moving on we've got the frame of our rack nice and built.

Now we're gonna mount it.

So right now this is where all of the connections are coming in at.

We're going to have to take this, pull it up through here.

We're going to go in the attic.

Oof, bumped my head.

And bring them up over here.

Going offline.

All right, we've got that bundle good.

So we won't need that.

Made the hole a little bigger and we are slowly pulling cables out one by one.

So after all these cables were pulled out of the original box, to make 10 10 -foot extension cables so

that we can run the ethernet cables up and out of the way and into the new network cabinet.

Last night I ended up spending two and a half hours or so making ethernet cables.

Now I could have easily went out and bought 10 pre -made ethernet cables, which, you know, would have saved me some time.

But because I have this thousand feet of CAT6 cable, I just purchased the connectors, the cable, and the two tools to make it happen.

Basically, pull out some wire, right?

I'll make it pretty short just for demonstration purposes.

Now I've got a cut piece of wire, so I'll go ahead, boom, give it a twist.

Now it exposes the little wires inside.

Now these wires, you're gonna have four pairs of wires.

You're gonna have a brown pair, orange pair, green pair, and a blue pair.

And there's gonna be a little plastic divider piece in there.

You can take that, cut it away.

Or the little string in there, you can cut that as well.

There we go.

Now you can wire these two ways, T568A or T568B.

You can choose either way.

As long as they're wired the same on both ends, you're good to go.

Basically, what you're going to do is I've got these four sets of wires, unbundle them and order them in the correct order.

Here we've got brown, white brown, orange, white blue, blue, white orange, green, white.

Get these in line.

We'll give them a nice snip.

All right.

and they'll all get seated at the front.

To splice the connection, Boom.

We've got our small ethernet cable.

Now to test this, all we have to do is take our tester, plug this into the bottom, and then as soon as you hit test, we got a double green.

So this one is wired correctly.

Now if you miswired something or if there was a missing connection, it'd tell you

that as soon as you click test one of these three errors will light up with a little red next to it.

So now that our wiring tutorial is all done it is on to managing these cables all up in the attic.

So all these cables were too short to run into the networking cabinet so I had to make the additional Ethernet lines.

I used those couplings there and so

that once I get all this wire here nice and tidied and it looks not like a mess up in the attic,

I can go ahead, use the coupling to attach onto the existing Ethernet lines

and then run them nicely up and out of the way here.

So they reach into the networking rack and we have plenty of slack. to do so.

After some unforeseen technical difficulties, we are finally ready to put our rack together.

So the first thing going to the rack is the network video quarter.

Now, to quick look at the hardware.

On the back, we've got our input for our power, three fans to help dissipate heat, internet connection and redundant power.

On the front side, we have four drives total, and each of them can take two and a half or three and a half drives, depending on what you want to use.

We've got our hardware, our rack ears, and our power cable to get it situated.

Now, this is going towards the top of the rack because it creates a lot of Moving on.

we have the Dream Machine Pro Max.

Now this also has two drives and you can run Unify Protect on it

if you choose but you will be limited to the two.

Now you have the 1 .3 inch screen, you got your power cord, rack ears, and hardware to get installed.

100

So you throw in the rack gears.

101

We're going to put that right below the NVR.

102

Moving on, we've got the patch panel.

103

Now this is going to nicely route all the networking cables coming into the rack

104

so that they can be routed into the switch in a very aesthetic manner.

105

Now we're putting these supports in because the switch is pretty hefty

106

and it's The first switch we chose and went with is the Pro HD 24 -P.

107

Eve.

108

Now this is a heavy duty switch.

109

It's got POE power to all of these ports.

110

It's got 24 ports.

111

You got your 1 .3 inch screen.

112

and engage connections to Daisy Chain the Internet.

113

here.

114

Now this is gonna slide in and be supported, but we'll put them in anyways.

115

So next up we have the UNAS Pro.

116

Now this is a seven day network attached storage system

117

that Ubiquiti offers and it just fits so well in the ecosystem

118

Now they have came out with a couple of newer options.

119

a low key, They don't have the little 1 .3 machine.

120

And I know I don't use it much, but I still like it.

121

Now next, we've got Power Distribution Pro.

122

This is gonna go in towards the bottom of the rack and just handle supplying power to all of our devices.

123

Moving on to our last item is our redundant power, which is just a nice backup.

124

Now I did leave some space in between the hardware, so to cover those up I've got these blank panels off of Amazon.

125

spray painted to match the ubiquity gear and a brush panel.

126

above the power distribution pro tables.

127

Now added a show up at the bottom there.

128

And then I had to wait on these little couplings for the patch panel.

129

They finally got delivered.

130

So we installed those and we hit it finally have our full setup exactly how we wanted.

131

and we have an idea of what needs to go where.

132

So now I can take it out, and hang it because with all that gear in there it's way too heavy.

133

So, I hung the networking rack, we got all the cables nicely organize and then we could re -put in all of our equipment.

134

Now this is the exhaust fans.

135

It comes with a little in -wall controller so

136

I cut that out here at the bottom

137

and then we just notched a hole in the back of the marking rack to run the cables behind the wall.

138

and have a nice little in -wall controller so we can adjust the exhaust fans depending on the temperatures.

139

Now after that I just started getting everything re -situated in the networking rack

140

and spent the rest of the night getting that organized Now moving on to the next day, I started with the security install.

141

Now, because I didn't have the Ethernet cables ran, I had to run those around the EVE so that I could have all the cameras connected.

142

and powered via PoE going back into the memory.

143

10. Now my camera did die when I was installing this so We'll just skip to the final reveal.

144

So the last thing I need to do was hook up the access points.

145

Now this is the U7 Pro XG.

146

This is the new industrial design updated look access points that Ubiqui came out with recently.

147

It is a lot better looking than the plastic bubbly looking access points.

148

So these are very clean and aesthetic.

149

and we have two of them covering the whole house.

150

So now that the setup is complete and I've had some time to get familiar with it, Let's dive into a bit of an overview on everything we've got going on,

151

starting with the networking rack.

152

So starting off at the top we have the network video recorder.

153

Now having a dedicated NVR offloads Unify Protect from running on the Dream Machine.

154

Now the benefit of this is we get additional bays for

155

video storage expandability instead of being limited to the two drives on the Dream Machine.

156

Now you can see here that the Unify Protect app is pretty robust with features.

157

It categorizes all motion events so you're able to filter through based on a specific person, vehicle, or animal.

158

And that's just the start, but their real bonus is that you get all of this with no monthly subscription.

159

So moving on next, we've got the Dream Machine Pro Max.

160

Now the Dream Machine handles our incoming five gig fiber connection and keeps those speeds while having the security features on, unlike the other models.

161

And lastly, it does have the 1 .3 inch touchscreen for real time stats.

162

Moving right on down the line, we've got the Switch Pro HD 24 PoE,

163

which is probably overkill, but it has 22 2 .5 gig ports into 10 gig ports.

164

Now, all these ports provide PoE++ power, which makes connecting things like the PTZ cameras very simple.

165

Now, lastly, it does have the ether lighting feature that makes the setup look very clean.

166

And it also adds functionality when you're trying to troubleshoot or locate a specific port which your device is connected to.

167

So next up we've got the UNASP Pro, which is a personal high -speed cloud for files and backups.

168

It has 7 bays for high density storage with up to 24 terabytes each.

169

That gives you 168 total terabytes of max storage.

170

It has dropbox style file syncing across multiple devices and workstations without any monthly subscription.

171

It also has a SFP + connection so your file transfers are extremely fast

172

and you can even video edit off the cloud if you wanted to.

173

So next up we've got the Power Distribution Pro.

174

Now the main feature here is we have remote port control.

175

So each outlet can be remotely monitored and restarted through the app, allowing us to power cycle specific hardware without being physically present.

176

With that we have automated recovery

177

so it can be configured to automatically reboot our gateway

178

if it detects a loss of internet to help restore service without manual intervention.

179

Next up we have the redundant power.

180

Now this is not necessary.

181

This is solely just a backup.

182

Now if the power supply and a particular piece of hardware in the rack were to fail, this would instantly begin supplying power so there's no downtime with your network.

183

Now, lastly on the bottom, I have a smart home hub as well as the Superlink gateway.

184

Now this is necessary if you plan on using any of the sensors that Uniplay offers.

185

They have entry sensors, motion glass break and environmental sensors that paired with the siren just adds another level to your security.

186

set up. And besides

187

that, I have additional space at the bottom of the rack to be able to add in some power amps

188

that UniFi offers.

189

that will be able to power and play music to the ceiling speakers of the home later on in the future

190

now let's briefly talk about the security setup now

191

when it comes to security cameras unify has a lot of options

192

that can fit your specific need now for me i ended up going with the g6 ptz

193

because they recently came out and they have 4k dual lens cameras with 10x hybrid zoom now it features an

194

and ultra -low latency pan -tilt -zoom control for motion tracking.

195

Now, next up we've got the AI PTZ Industrial.

196

Now this is similar to the last camera but beefs everything up.

197

It has enhanced AI capabilities, 22x optical zoom, and long -range adaptive IR LED night vision.

198

It's got 360 endless panning and also features a license plate reader.

199

So besides that, we have motion activated floodlights, and indoor cameras like the G6 Instant that are able to record via Wi -Fi and you don't need an Ethernet connection.

200

So overall I think the Unify ecosystem is very professional and extremely polished.

201

It feeds my want to continue to expand the system and build on what I have going so far.

202

Now with the addition of all my data being stored locally and no subscription fees whatsoever, it's hard to convince me that anything else tops.

203

I will leave a link to all the gear in the description.

204

If you have any questions, leave them in the comments and I will try to help you out.

205

With that, I will see you guys in the next one.

✨ おすすめ動画

285 文

I Built a Fake Home Theater…

Business EnglishUniversity StudentsWorking Adults

208 文

My HomeLab Monitoring Rules // feat. Checkmk

Business EnglishUniversity StudentsWorking Adults

45 文

Creating Iron Man suit. Full workflow by @AlexLab. Real life Iron Man exosuit with a box of scraps)

Business EnglishUniversity StudentsWorking Adults

275 文

Every Networking Concept Explained In 20 Minutes

Business EnglishUniversity StudentsWorking Adults

81 文

Munky (Korn) - talks tips, tricks & guitar hacks

Business EnglishUniversity StudentsWorking Adults

239 文

Why She Left Her Toronto Condo for a Quiet Modern Farmhouse in Quebec – FULL TOUR

Business EnglishDaily ConversationUniversity Students

25 文

ホームネットワーク構築の裏側：日常英語の活用法

この動画では、ホームネットワークを一から作り上げる過程が紹介されています。話者は古い設備のアップグレードからラックの塗装、配線の整理まで、細かな作業を語りながら、自然な日常英語を使っています。こうした実用的な場面の会話は、YouTubeで英語学習する上で最適です。特に、作業の手順や問題解決の過程を説明する表現は、IELTSスピーキング対策にも役立ちます。

日常コミュニケーションに使える5つのフレーズ

"I quickly realized that..."（すぐに～と気づいた）：問題や課題を発見した時に使える表現。
"plenty of room for expansion"（拡張の余地が十分ある）：設備や計画の柔軟性を説明する際に便利。
"wipe it off with some rubbing alcohol"（アルコールで拭き取る）：具体的な作業指示の表現。
"let it dry overnight"（一晩乾かす）：時間をかけて処理する場合の表現。
"moving on"（次に進む）：話題を転換する時の自然な言い方。

動画を使ったシャドーイングのステップバイステップガイド

この動画は、shadowspeak（シャドースピーク）の練習に最適です。以下の方法で効果的に取り組めます。

ステップ1：動画を1.25倍速で視聴

話者の発音とリズムを把握します。特に、"scuff it up"や"overspray"などの単語の発音に注意し、英語の発音を良くするために繰り返し聞きます。

ステップ2：1文ずつポーズして真似る

短いフレーズから始め、"We're gonna be rerouting all the wires"のような文を真似て発音します。イントネーションや強調する単語も同じように再現します。

ステップ3：全体を流し聞きして一緒に話す

動画を再生しながら、1秒遅れで話者の後を追いかけます。これにより、自然なスピードでの発話が慣れ、IELTSスピーキング対策にもなります。

この方法で練習すると、日常英語の応用能力が向上するだけでなく、発音やリズムも自然に身につきます。ぜひ試してみてください。

この動画の文法

話し手がよく使っている文型を、動画の実際の表現とともに紹介します。

文型	動画での表現
条件文 if + 節, will/would + 動詞 — 条件とその結果	if there was a missing connection, it'd tell · if you choose but you will be
受動態 be + 過去分詞 — 誰がするかより、何が起きるかに焦点を当てる	being limited · were pulled · is wired
関係詞節 who / which + 節 — 人や物について情報を加える	rack which was · power, which is · power, which makes
現在完了形 have/has + 過去分詞 — 過去の出来事が今も関係している	have automated · has enhanced

シャドーイングとは？英語上達に効果的な理由

シャドーイング（Shadowing）は、もともとプロの通訳者養成プログラムで開発された言語学習法で、多言語習得者として知られるDr. Alexander Arguelles によって広く普及されました。方法はシンプルですが非常に効果的：ネイティブスピーカーの英語を聞きながら、1〜2秒の遅延で声に出してすぐに繰り返す——まるで「影（shadow）」のように話者を追いかけます。文法ドリルや受動的なリスニングと異なり、シャドーイングは脳と口の筋肉が同時にリアルタイムで英語を処理・再現することを強制します。研究により、発音精度、抑揚、リズム、連音、リスニング力、そして会話の流暢さが大幅に向上することが確認されています。IELTSスピーキング対策や自然な英語コミュニケーションを目指す方に特におすすめです。

シャドーイングのやり方: ステップ別の完全ガイドを読む →

シャドーイング練習: Building my DREAM home network FROM SCRATCH | UniFi Network & Rack Setup - 動画で英語スピーキングを学ぶ

I Built a Fake Home Theater…

My HomeLab Monitoring Rules // feat. Checkmk

Creating Iron Man suit. Full workflow by @AlexLab. Real life Iron Man exosuit with a box of scraps)

Every Networking Concept Explained In 20 Minutes

Munky (Korn) - talks tips, tricks & guitar hacks

Why She Left Her Toronto Condo for a Quiet Modern Farmhouse in Quebec – FULL TOUR

building a PC with *180mm* case fans

THIS Is Where the Internet Lives

BULKING

2026 Mac Mini - CRAZY FAST! (M5 Pro / M5 Ultra)

Your House Is Making You Sick (15 Solutions)

Memory is crazy expensive so I made my own…

ホームネットワーク構築の裏側：日常英語の活用法

日常コミュニケーションに使える5つのフレーズ

動画を使ったシャドーイングのステップバイステップガイド

ステップ1：動画を1.25倍速で視聴

ステップ2：1文ずつポーズして真似る

ステップ3：全体を流し聞きして一緒に話す

この動画の文法

シャドーイングとは？英語上達に効果的な理由

building a PC with 180mm case fans