쉐도잉 연습: Terminal Block Connection Types - 영상으로 영어 말하기 배우기

연습 모드 선택

각 모드는 전체 화면 연습실로 열립니다.

49 문장

문장이 너무 짧거나 길면 Edit를 눌러 조정하세요.

Hello, I'm Josh Bloom.

Welcome back to the RSP Supply Education Series.

In today's video, we're going to be talking about different types of terminal block connection types.

More specifically, we're going to be focusing on the Phoenix Contact Clip Line Terminal Blocks.

So today, we're going to talk about the five different connection types that Phoenix Contact offers with their terminal blocks.

The first type of connection is the screw type connection terminal block.

That is shown right here.

This is the most common type of connection that you'll find with terminal blocks.

It's been in the industry for a very long time.

You simply use a precision screwdriver to make the connection with a stripped wire.

Let me demonstrate how you make the connection.

You insert the wire into the terminal port and simply tighten your screw until your wire has been properly torqued.

The next type of terminal block connection we're going to talk about is the spring cage connection, which are located right here.

The benefits of using the spring cage connection are going to be, it's a much quicker way to terminate and disconnect wires.

They're very safe and sturdy and secure, much like the screw type connection.

Let me demonstrate how to make the connection.

We first take a wire and strip that back about one half inch.

We are going to need to use a precision screwdriver, which we will insert into the spring cage.

And then we can simply insert our wire, make sure that's fully seated, and then remove our precision screwdriver.

We now have a very secure, safe, tight connection.

The next type of terminal block connection we want to talk about today is referred to as PIT or push -in terminal.

The benefit of using this type of terminal block connection is a tool -free connection.

This allows operators to easily remove and reinsert wires without the need for any type of tool.

For the wire that's used on a PIT or push -in terminal connection, we need to make sure that we're using a ferrule.

The ferrule allows for the connection to work properly and seat properly.

We simply take the wire with the ferrule connected, we insert it into the push -in terminal, make sure it is seated fully,

and there we have a fully seated, safe, secure connection.

To remove this connection, we simply take a precision screwdriver, push down on the spring, which allows us to remove the wire very simply.

The next type of terminal block connection we want to talk about today is referred to as Fast Connect.

The benefit of using this type of terminal block connection is

it allows the operator to terminate the wire without the need for stripping the insulation.

This is also a gas -sealed connection, which helps us prevent the wire from becoming corroded or degraded in any way.

Let me demonstrate how we make this connection.

Simply take a wire that has not been stripped of its insulation, insert it into the proper terminal, make sure the wire is fully seated.

Take a precision screwdriver, insert it into the slot, pry that terminal back to the center of the terminal block.

What this does is it allows the terminal block to displace the insulation to make proper contact with the wire.

Once we've done this, we have a very secure, safe connection that required no tools.

The last type of terminal block connection we want to talk about today is referred to is a barrier terminal block.

The benefit of being able to use a barrier terminal block is it allows us to use a ring

or spade terminal at the end of our wire.

This type of terminal block is commonly used in the rail and transportation industries or where vibration might become a common problem.

Let me demonstrate how we make this type of connection.

We first want to make sure that our wire has either a spade or ring terminal properly crimped and connected.

Then we are going to insert the ring terminal over the bolts on the barrier terminal block.

We're going to push the lever down on the top of the terminal block until it is fully seated.

Then we're going to take a common flathead screwdriver and secure the nut over the bolt.

At this point we have a secure connection that will resist loosening due to vibration we might encounter.

As always you can find any of the products seen in this video on our website.

For more information or other training videos please go to rspsupply .com, the internet's top source for industrial hardware.

앱 다운로드

유창하게 말하는 데 필요한 모든 것

AI 발음 평가문장마다 점수 확인

IPA 발음 연습모든 소리 마스터

단어 학습나만의 단어장 만들기

단어 게임놀면서 외우기

QR 스캔

Download on theApp Store Get it onGoogle Play

FOR YOU

이 레슨의 어휘와 말하기 포인트

이 B2 수준 말하기 레슨은 영상 “Terminal Block Connection Types”을(를) 바탕으로 합니다. 가장 자주 반복되는 단어는 다음과 같습니다: connection, terminal, block, wire, type. 이 영상에는 섀도잉할 문장 49개와 단어 776개가 있습니다. 말하는 구간의 길이는 3:58입니다. 화자는 분당 약 195단어로 빠르게 말하므로 연음과 약하게 발음되는 소리가 많습니다. 영어에서 가장 많이 쓰이는 3,000단어에 속하는 단어가 79%뿐이라 어휘가 어려운 편입니다.

이 영상의 핵심 어휘

영상에서 가장 어려운 단어 9개를 발음, 뜻과 함께 정리했습니다.

단어	발음	뜻
insert 동사	/ɪnˈsɝt/	삽입하다, 넣다
screwdriver 명사	/ˈskɹuˌdɹaɪvɚ/	나사돌리개, 스크루드라이버
cage 명사	/keɪd͡ʒ/	우리
barrier 명사	/ˈbæɹi.ə/	장벽
vibration 명사	/vaɪˈbɹeɪʃən/	진동
bolt 명사	/boʊlt/	볼트
sturdy 형용사	/ˈstɜrdi/	튼튼하다
lever 명사	/ˈliː.və/	지레
torque 명사	/tɔɹk/	돌림힘

이 영상의 문법

화자가 가장 많이 쓰는 문형을 영상 속 실제 표현과 함께 정리했습니다.

문형	영상 속 표현
수동태 be + 과거분사 — 누가 하는지보다 무슨 일이 일어나는지에 초점	is shown · has been properly torqued · are located
현재완료 have/has + 과거분사 — 과거의 일이 지금도 관련이 있을 때	It's been · has been · has not been stripped

주의할 발음

화자는 we're, I'm, they're 같은 축약형과 약화된 형태를 11번 사용합니다. 들리는 대로 짧게 발음하세요.

“sh”와 “zh” 소리: precision /pɹɪˈsɪʒ.ən/, insulation /ˌɪnsəˈleɪʃən/, vibration /vaɪˈbɹeɪʃən/

한국어 화자가 어려워하는 소리:

/f/ — ㅍ(/p/)으로 바꾸지 말고 윗니를 아랫입술에 대기: ferrule /ˈfɛɹ.əl/, flathead /ˈflætˌhɛd/
/v/ — ㅂ(/b/)과 구별하기: screwdriver /ˈskɹuˌdɹaɪvɚ/, vibration /vaɪˈbɹeɪʃən/, lever /ˈliː.və/

이 영상으로 연습하는 방법

먼저 말하지 않고 영상을 끝까지 듣고 모르는 단어를 적어 둡니다.
0.75배속으로 한 문장씩 섀도잉을 시작하고, 익숙해지면 보통 속도로 돌아갑니다.
자신의 목소리를 녹음해 원본과 비교하고, insert, screwdriver, cage 같은 단어에 특히 주의합니다.

쉐도잉이란? 영어 실력을 빠르게 키우는 과학적 방법

쉐도잉(Shadowing)은 원래 전문 통역사 훈련을 위해 개발된 언어 학습 기법으로, 다언어 학자인 Dr. Alexander Arguelles에 의해 대중화된 방법입니다. 핵심 원리는 간단하지만 매우 강력합니다: 원어민의 영어를 들으면서 1~2초의 짧은 지연으로 즉시 소리 내어 따라 말하는 것——마치 '그림자(shadow)'처럼 화자를 따라가는 것입니다. 문법 공부나 수동적인 청취와 달리, 쉐도잉은 뇌와 입 근육이 동시에 실시간으로 영어를 처리하고 재현하도록 훈련합니다. 연구에 따르면 이 방법은 발음 정확도, 억양, 리듬, 연음, 청취력, 말하기 유창성을 크게 향상시킵니다. IELTS 스피킹 준비와 자연스러운 영어 소통을 원하는 분들에게 특히 효과적입니다.

섀도잉 방법: 단계별 전체 가이드 읽기 →

쉐도잉 연습: Terminal Block Connection Types - 영상으로 영어 말하기 배우기

연습 모드 선택

앱 다운로드

추천 영상

HOW TO STRIP A CABLE using pliers as an electrician

Video

The Wall Outlet Computer

Types of Proximity Sensors! #automation #engineering #science #robotics #electronics

torx key v Hex key

7 Phases of Penetration Testing Explained | Think your system is safe? #cybersecurity #pentesting

Configure storage accounts | AZ-104 | Episode 16

TIA Portal 101: The Beginner's Guide to Starting a New Project

Water Flow and Water Pressure: A Live Demonstration

BAS Bootcamp: Day 6 Setting up IO Internally

Tonex Plug Headphone Amp | First Impressions and Review

Construction Safety Training Video // Over 40 Topics