Shadowing-Übung: Lec-6 Simplex Method | Maximization Problem | Mathematical Example Solution | Operations Research - Englisch Sprechen Lernen mit Video

Übungsmodus wählen

Jeder Modus öffnet einen Übungsraum im Vollbild.

575 Sätze

Wenn Sätze zu kurz oder zu lang sind, klicke auf Edit, um sie anzupassen.

Welcome to Academic Game Tutorials.

In this Operations Research Lecture Series, the topic for today's lecture is simplex method.

In the previous lecture we have seen how to convert a linear programming problem from general form to standard form.

So, here we have a linear programming problem and in today's lecture we will solve this question using simplex method.

So, this linear programming

Problem is given to us in general form.

To solve this using simplex method we have to convert it into standard form at first.

Now, at step number 1, by introducing slack variables s1, s2 and s3, we will convert the problem into standard form.

As we can see here, this is a maximization problem.

So, we don't have to change a thing in the objective function.

So, we will write the objective function as it is written here.

The objective function is, maximize, z equals to 3x1, plus 2x2, plus 5x3.

Now, let's write the constraints.

Here we have the constraints.

As we can see here, the decision variables x1, x2, and x3 are all greater than or equal to 0.

So, we don't have to change the decision variables in the constraints.

If there were any unrestricted decision variables then we would have to rewrite the constraint in equations.

Now, we will write the constraints as equations by introducing slack variables.

So, for the first equation, we will write subject to x1 plus 2x2 plus x3,

then leave some space and write equals to 430.

For the second equation, we will write 3x1 plus 2x3, then leave some space and write equals to 460.

For the third equation, we will write x1 plus 4x2 equals to 420.

Now, on the first case, here we can see less than or equal to sine,

that means, this left hand side is smaller than the right hand side, and to make both the sides equal,

we have to add slack variable to the left hand side or the smaller side,

so, on the left hand side we added the slack variable plus s1.

If there was a greater than or equal to sign, then we would have subtracted a surplus variable from the left hand side.

Similarly, on this case also we can see less than or equal to sign.

So, on the left hand side or the smaller side we added the slack variable, plus s2.

Now, on this third case also, here we can see less than or equal to sign.

So, on the left hand side we added the slack variable, plus s3.

Now, since we have introduced the slack variables s1, s2 and s3 in our equations, we also have to write s1,

s2 and s3 in the objective function over here.

So in the objective function we add 0 s1 plus 0 s2 plus 0 s3 as we know

that the cost of slack variable is 0, we have written 0 before them.

And, below the constraint equations we will write,

x1, x2, x3, s1, s2, s3 greater than or equal to 0.

So, we have converted the problem from general form to standard form at first.

Now, before solving this problem by simplex method, we need to remember some rules or steps for simplex method

which is also known as simplex algorithm this is nothing

but the steps to solve the problem using simplex method as

we can see here the first step was to convert the

given general linear programming problem into a standard linear programming problem form

so we have already converted the problem from general form to standard form using these four steps

we have explained these four steps of converting from general form to standard form in our previous lecture.

So, our first step is done.

Now, the second step in the simplex method is, write the values of the initial basic feasible solution.

So, for the second step we will find the initial basic feasible solution.

If we see here, we have six decision variables now.

The decision variables x1, x2 and x3 were given in the problem

and we introduced the other three variables s1 s2

and s3 the value of the decision variables

that were given in the problem will be 0 so we will write x1 equals to x2 equals to x3

equals to 0 then we have to find out the values of s1 s2 and s3

now in these constraints we can see if the values of x1 x2

and x3 is 0

then from the first one the value of s1 will be

430 from the second one the value of s2 will be 460

and from the third one the value of s3 will be 420.

So, our second step is done.

Now, the third step in the simplex method is, write the standard form LPP into matrix form.

So, in step 3, we have to write the standard linear programming problem into matrix form,

which is, A into x equals to B. So, A into x equals to B is the matrix form

and we have to write the standard linear programming problem into this A into X equals to B form.

Now if we take a look at the constraints here, the cost of X1 is 1,

the cost of X2 is 2 as we can see the cost is written in front of X2.

Similarly, the cost of X1 over here is 3.

So, in the matrix form, the letter A represents the cost of these six variables.

Again, the letter X in the matrix form represents these 6 variables.

And the letter B in the matrix form represents the values we have here in the right hand side.

So, let's write this standard form LPP into matrix form.

In the headings, at first here we have written all the variables X1, X2, X3, S1, S2 and S3.

Now, we will put the cost or the values of these variables from this standard LPP.

Here we can see that, for the first constraint equation, the value of x1 is 1, the value of x2 is 2,

the value of x3 is 1, and the value of s1 is 1.

So, we put the values 1, 2, 1 and 1 over here.

Since, the first constraint equation does not have S2 and S3, so, the value of S2 and S3 is 0.

Similarly, for the second constraint equation, the value of X1 is 3, there is no X2 here.

So, value of X2 is 0, the value of X3 is 2, there is no S1 here.

So, value of s1 is 0, the value of s2 is 1, and, since there is no s3 here, so, value of s3 is 0.

And, for the third equation, the value of x1 is 1, the value of x2 is 4, there is no x3, so,

the value of x3 is 0, there is no s1, and s2 here, so, value of s1, and s2 is also 0,

and, the value of s3 is 1.

So, we have written the values of A in the matrix form.

Now, for the values of X in the matrix form, we will write all the variables over here as the value of X.

So, we have written all the variables X1, X2, X3, S1, S2, and S3 as the value of X.

And, finally on the right hand side,

we will write these values from the equations 430, 460 and 420.

These are the values of B in the matrix form.

So, in this third step, we have written the standard LPP into the matrix form which is AX equals to B.

Now, in step number 4, we have to construct initial simplex table.

So, let's see how to make a simplex table.

Here, we can see an initial simplex table.

You have to make an initial simplex table exactly like this one.

And remember to leave some space on the right hand side of the table.

We will use this space later.

Now, the first row on the table is for cj.

To fill up this row for cj, we will take a look at the objective function.

Here, in the objective function we have 6 variables, x1, x2, x3, s1, s2, and s3.

100

And in front of each variable there is the cost of these variables, 3, 2, 5, 0, 0, and 0.

101

We will write the cost of these variables from objective function, to fill up the row for cj over here.

102

So we have written the costs 3 for x1 2 for x2 5 for x3 0 for s1 s2 and s3

103

So this row has been filled

104

Now we will fill up the columns the column B over here is the column for basic variables

105

When we will make the first initial table

106

The slack or surplus variables that we introduced into the problem earlier will be written in this column B.

107

So, here we can see that we have three slack variables.

108

So, in the column B we will write the three slack variables, S1, S2 and S3.

109

And, the column CB over here is for the cost of these basic variables in column B.

110

So, the cost of S1 is zero, the cost of S2 and S3 are also zero.

111

Since this is the initial simplex table, the basic variables we write in this column B are all slack variables.

112

And we already know that, the cost of slack and surplus variables is 0.

113

So, the value of CB will be 0 at first for all variables in the initial simplex table.

114

Now, in the column XB over here, we will write the values from the right hand side of the matrix form,

115

430, 460, and 420.

116

are the values on the right hand side.

117

If you haven't made the matrix yet, you can take the values from right hand side of these equations also.

118

So in the column xp we write the values from right hand side of the matrix 430,

119

460 and 420.

120

Now we have to fill up this region.

121

We will put the values of the variables for these rows directly from the matrix over here.

122

In the first row we have 1, 2, 1, 1, 0, and 0.

123

In the second row we have 3, 0, 2, 0, 1, and 0.

124

And, in the last row we have 1, 4, 0, 0, 0, and 1.

125

The initial simplex table is now ready.

126

So, in this fourth step, we have created the initial simplex table.

127

Now, the step number 5 is, calculate the values of Zj minus Cj and check the basic feasible solution for optimality.

128

So in this fifth step, we will at first calculate the values of Zj minus Cj using this formula and following these steps.

129

So, let's find the value of Zj minus Cj at first.

130

Now in the initial simplex table, we have a row down here.

131

This is the row for Zj minus Cj.

132

For the calculation of Zj minus Cj,

133

the general formula is Zj minus Cj equals to CB into Xj minus Cj.

134

So, this is a general formula and based on this general formula, for the calculation of Z1 minus C1,

135

the formula will be Z1 minus C1 equals to CB into X1 minus C1.

136

Here, since this is the initial simplex table, the basic variables we write in this column b are all slack variables.

137

And we already know that, the cost of slack or surplus variables is 0.

138

So the value of CB will be 0 at first for all variables in the initial simplex table.

139

Now, we have CB into x1.

140

The value of CB is 0, 0, and 0.

141

And the value of x1 is 1, 3, and 1.

142

So the value of CB into X1 will be 0 into 1 plus 0 into 3 plus 0 into 1.

143

Then give the minus sign.

144

And in the CJ row, we can see the value of C1 is 3.

145

So we write 3 here.

146

And finally, the value of Z1 minus C1 will be minus 3.

147

So in this row, here we will write minus 3.

148

Now, in the same way we will find out value of Z2 minus C2.

149

As we said earlier, since this is the initial simplex table, the basic variables we write in this column B are all slack variables.

150

So the value of CB will be zero at first for all variables.

151

So in the initial simplex table, the value of ZJ minus CJ usually depends on CJ only,

152

and the value of ZJ minus CJ will be minus CJ.

153

So, we will find out value of Z2 minus C2.

154

The formula will be CB into X2 minus C2.

155

Here we will have 0 into 2 plus 0 into 0 plus 0 into 4 minus the value of C2 is 2.

156

And finally, the value of Z2 minus C2 will be minus 2.

157

So, in this row, here we will write, minus 2.

158

Similarly, we can calculate the value for Z3 minus C3 will be, minus 5.

159

The value for Z4 minus C4 will be, 0.

160

And these two values will be also 0.

161

So, we have found out the values for ZJ minus CJ using this formula.

162

Now, after finding the values, the first condition is, if all the values of ZJ minus CJ are greater than or equal to zero,

163

then the optimal solution will be obtained.

164

So, if the values of ZJ minus CJ that we found out are either greater than zero or equal to zero,

165

then we will obtain the optimal solution.

166

Now, let's check over here, the values of ZJ minus CJ are not greater than or equal to zero, rather we have negative values here,

167

minus 3, minus 2, minus 5, so, all the values are not positive or equal to zero, thus the first condition is not fulfilled,

168

and we will not have the optimal solution here.

169

So, let's move to the second condition, the second condition says,

170

if at least one value of ZJ minus CJ is negative then indicate by an arrow

171

and that column will be called key column.

172

If we see in the table we have three negative values of ZJ minus CJ

173

if there was only one negative value then we would indicate

174

that negative value by an arrow and that column would be called key column.

175

Since we have more than one negative value the second condition is also not applicable we will move to the third condition.

176

The third Third condition says, if more than one or multiple values of ZJ minus CJ are negative, then choose the most negative value of them,

177

then, indicate that most negative value by an arrow, and that column will be called key column.

178

If we see in the table, we have three negative values of ZJ minus CJ, minus 3, minus 2, minus 5,

179

the most negative value among these three values is, minus 5, we will now indicate this most negative value by an arrow

180

and this corresponding column containing this arrow indicated value will be called key column.

181

So this column X3 is the corresponding column to this value which we indicated with an arrow.

182

This column of X3 with the values 1, 2 and 0 will be called the key column.

183

And X3 will be called incoming vector.

184

So in step number 5, we have found out the values of ZJ minus CJ.

185

Then, based on these three conditions we found out the key column and the incoming vector.

186

Now, in step number 6, we have to calculate the minimum ratio.

187

Here we have the formula for calculating minimum ratio equals to Xp divided by Ck.

188

Here, Ck is the key column and the value of Ck has to be greater than zero.

189

So, let's find out the minimum ratios.

190

Now, on the right hand side of the initial simplex table we had left some space.

191

We will use that space for calculation of minimum ratio.

192

When we made this initial simplex table, we did not make these column for minimum ratio at first,

193

because after finding these values of ZJ minus CJ, if we found out that all the values are greater than or equal to 0,

194

Then we would not have to calculate minimum ratio and we would not make the minimum ratio column.

195

But here we have negative values of ZJ minus CJ.

196

So we need to calculate the minimum ratio.

197

Thus we made the minimum ratio column now.

198

So the formula of minimum ratio is XP divided by key column.

199

Here the key column is this X3 column.

200

So we write the formula minimum ratio equals to XP divided by X3.

201

Here, x3 is the key column and the value of x3 has to be always greater than 0.

202

If the value of CK is equal to 0 or less than 0, then we will not find the minimum ratio for that row.

203

Now for the first row, value of XP is 430 and the value of x3 is 1.

204

So, the minimum ratio will be 430 divided by 1 equals to 430.

205

For the second row, value of xp is 460 and the value of x3 is 2.

206

So, the minimum ratio will be 460 divided by 2 equals to 230.

207

And, for the last row, value of xp is 420 and the value of x3 is 0.

208

Now, since the value of x3 or the key column is 0 in this case, we will not calculate the minimum ratio for this row

209

if we divided 420 by 0 it would ultimately give an undefined result

210

so we will not calculate the minimum ratio for this row

211

because x3 has to be greater than 0 now among 430 and 230

212

The minimum value is 230.

213

So we will indicate this minimum value 230 by using an arrow like this.

214

Now we made the first arrow here

215

and this column X3 is the corresponding column to this value which we indicated with the first arrow.

216

This column of X3 is called the key column.

217

And X3 is called incoming vector.

218

Now, in the case of minimum ratio, when we got the minimum value from minimum ratio,

219

230, we also indicated this minimum value with an arrow, and this row is the corresponding row to this value which we indicated with this arrow.

220

So this corresponding row is called the key row.

221

And the variable in front of the key row is S2.

222

So this variable S2 is called outgoing vector.

223

And, this common element between this key row and key column is called key element.

224

Here, 2 is the common element between key row and key column, so, 2 is the key element.

225

So, in step number 6, we have found out the minimum ratios, then, based on the minimum value, we found out the key row,

226

the outgoing vector, and the key element.

227

Now, in step number 7, we have to construct the new simplex table by entering incoming vector.

228

And after that we will repeat step number 5 and 6.

229

So we have to repeat the step number 5 and step number 6 again after constructing the new simplex table.

230

So, moving forward, here we have made a new simplex table.

231

In the heading we have written first iteration.

232

So this is the first iteration simplex table we have constructed this new simplex table exactly like the first table.

233

When we filled up the values for the initial simplex table, we had easily looked at the matrix,

234

and filled the values from the matrix to the initial simplex table without much calculation.

235

But, in this new simplex table, we have to calculate each value to fill up the table.

236

The value of Cj row will remain same, because the cost of the objective function has remained same.

237

So, we will copy and write the value of cj from the table number 1 to this new table.

238

Here we will write 3, 2, 5, 0, 0, and 0 as the cost will remain same.

239

In the basic variable, in the first table we had s1, s2, and s3.

240

Here, s2 is the outgoing vector and in place of s2, the incoming vector is x3.

241

So, in place of S2, we will write X3.

242

Here we have written the basic variables, S1, X3, and S3.

243

So we have replaced S2 by X3.

244

Now we will write the cost of these variables here.

245

So, the cost of S1 is 0, the cost of X3 is 5, and the cost of S3 is 0.

246

Now starting from XP, we have to fill up the rest of this table by doing some calculations

247

and we will do the calculations by looking at table number 1.

248

Now, 2 is the key element here.

249

This key element has very important role in doing the calculations.

250

Now, this key element is in second row.

251

So we will divide all the values of the second row by this key element.

252

In other words, we will divide all elements of the key row by the key element.

253

We will divide 460 by 2, divide 3 by 2, similarly the other elements also.

254

So, when we divide 460 by 2, in the new table we will write 230 in the place of 460,

255

we are replacing the second row in the old table, so we will write the new values in the second row of the new table.

256

So here we will have 3 divided by 2, then 0 divided by 2, which gives us 0, 2 divided by 2,

257

which gives us 1, then we will have 0, 1 divided by 2, and 0.

258

So, why are we doing this?

259

If you observe carefully, in table number 1, the basic variables were S1, S2, and S3.

260

If you observe the values of S1 column here, we have 1, 0, 0.

261

In the S2 column here, we have 0, 1, 0.

262

And in the S3 column here, we have 0, 0, 1.

263

So, this forms an identity matrix.

264

The basic variables are written serially as S1, S2 and S3 and if the S1,

265

S2 and S3 columns are arranged in the same serial, we get an identity matrix like this.

266

Now, in the table 2 also, the basic variables are S1, X3 and S3.

267

If the S1, X3 and S3 columns are arranged in the same serial, we should get an identity matrix.

268

The first basic variable is S1.

269

In the first table we saw, the value of the first basic variable s1 column was 1, 0, 0.

270

So, in new table, in the first basic variable s1 column we will write 1, 0, 0.

271

Now, the second basic variable is x3.

272

In the first table we saw, the value of the second basic variable s2 column was 0, 1, 0.

273

So, in new table, in the second basic variable x3 column we will write 0, 1, 0.

274

And, the third basic variable is s3.

275

In the first table we saw, the value of the third basic variable s3 column was 0, 0, 1.

276

So, in new table, in the third basic variable s3 column we will write 0, 0, 1.

277

Now, if we arrange the columns of S1, X3 and S3 serially, we will get an identity matrix form like this one.

278

In this lecture we will see two methods of forming this table,

279

we are learning one method now and if we require a new simplex table for finding the values,

280

then in the second iteration table we will see another method of forming this table,

281

you can solve using any one method that seems easier to you.

282

So, in this first method, we have formed the table and filled some portion of it,

283

but we don't know the values to fill up these empty spaces.

284

So, to find out these remaining values we have to look back in the first table.

285

Let's find out the value for this position at first, in the table number 1, in this position we have 430.

286

So, we go to table number 1, then we will directly cross multiply 430 with the key element.

287

Here the key element is 2.

288

So here we write 430 multiplied by 2.

289

We have to find this position in new table.

290

So we directly multiplied 430 by key element 2.

291

And then we can see that here we have 460.

292

And here we have 1.

293

If we multiply 460 and 1,

294

it will form across diagonally we multiplied 430 with 2 and we will multiply 460 with 1 over here.

295

So it will be a cross multiplication.

296

So in calculation we write 430 multiplied with 2 minus 460 into 1.

297

Then we will divide this whole thing by the key element.

298

Here the key element is 2.

299

So we divide the whole expression by 2 and finally we will get a value of 200.

300

We were finding this value for this position.

301

So we will write 200 in this position.

302

Now, we will find out the value for this position.

303

In the table number 1, in this position we have 420.

304

We will directly cross multiply 420 with the key element.

305

Here the key element is 2.

306

So, we will multiply 420 with 2.

307

And then, we can see that here we have 460.

308

And here we have 0.

309

If we multiply 460 and 0, it will form a cross diagonally.

310

We multiplied 420 with 2.

311

And we will multiply 460 with 0 over here.

312

So it will be a cross multiplication.

313

So, in calculation we write, 420 multiplied with 2, minus, 460 into 0.

314

Then we will divide this whole thing by the key element.

315

Here the key element is 2.

316

So we divide the whole expression by 2.

317

And finally we will get a value of 420.

318

We were finding this value for this position.

319

So we will write 420 in this position.

320

Similarly, we will find out the value for this position.

321

In the first table, in this position we have 1.

322

We will directly cross multiply 1 with the key element 2.

323

Remember that, we need to find this position in new table.

324

So we will multiply this value with key element first.

325

Then we will multiply the other two corner values of the imaginary rectangle that makes a perfect cross with this one.

326

So, we will cross multiply 1 with 2.

327

We can see that here we have 3.

328

And here we have 1.

329

If we multiply 3 and 1, it will form a cross diagonally.

330

So, in calculation we write 1 multiplied with 2 minus 3 into 1.

331

Then we will divide this whole thing by the key element, 2.

332

And finally we will get a value of minus 1 by 2.

333

We were finding this value for this position.

334

So we will write minus 1 by 2 in this position.

335

Similarly, we will find out the value for this position.

336

In the first table, in this position we have 1.

337

We will directly cross multiply 1 with the key element 2.

338

We can see that here we have 3 and here we have 0.

339

If we multiply 3 and 0, it will form across diagonally.

340

So in calculation we write 1 multiplied with 2 minus 3 into 0.

341

Then we will divide this whole thing by the key element, 2.

342

And finally we will get a value of 1.

343

We were finding this value for this position.

344

So we will write 1 in this position.

345

Similarly, we will find out the value for this position.

346

In the first table, in this position we have 2.

347

We will directly cross multiply 2 with the key element 2.

348

We can see that here we have 0.

349

And here we have 1.

350

If we multiply 0 and 1, it will form a cross diagonally.

351

So, in calculation we write 2 multiplied with 2 minus 0 into 1.

352

Then we will divide this whole thing by the key element 2.

353

And finally we will get a value of 2.

354

We were finding this value for this position.

355

So we will write 2 in this position.

356

Now, we will find out the value for this position.

357

In the first table, in this position we have 4.

358

We will directly cross multiply 4 with the key element 2.

359

We can see that here we have 0 and here we have 0.

360

So, we will multiply 0 and 0.

361

It will form across diagonally.

362

So, in calculation we write 4 multiplied with 2 minus 0 into 0.

363

Then we will divide this whole thing by the key element 2.

364

And finally we will get a value of 4.

365

We were finding this value for this position.

366

So we will write 4 in this position.

367

We have two more empty spaces left.

368

We will find out the value for this position now.

369

In the first table, in this position we have 0.

370

We will directly cross multiply 0 with the key element 2.

371

We can see that here we have 1 and here we have 1.

372

So, we will multiply 1 and 1.

373

It will form a cross diagonally.

374

So, in calculation we write 0 multiplied with 2 minus 1 into 1.

375

Then we will divide this whole thing by the key element 2

376

and finally we will get a value of minus 1 by 2.

377

We were finding this value for this position.

378

So we will write minus 1 by 2 in this position.

379

So this is the last empty space in this table.

380

We will find out the value for this position now.

381

In the first table in this position we have 0.

382

We will directly cross multiply 0 with the key element 2.

383

We can see that here we have 0 and here we have 1.

384

So, we will multiply 0 and 1.

385

It will form across diagonally.

386

So, in calculation we write 0 multiplied with 2 minus 0 into 1.

387

Then we will divide this whole thing by the key element 2 and the value is 0.

388

We were finding this value for this position.

389

So, we will write 0 in this position.

390

So, we have prepared the simplex table for the first iteration.

391

We have filled all the values in this first iteration table.

392

Now, we will find out the values for ZJ minus CJ and fill up this last row.

393

We will find out the values for ZJ minus CJ using this formula just like we did for the initial table.

394

The general formula is ZJ minus CJ equals to CB into XJ minus CJ.

395

For the calculation of Z1 minus C1,

396

the formula will be Z1 minus C1 equals to CB into X1 minus C1.

397

In the initial table, all the values of CB were 0, but in this first iteration table, the values of CB are 0, 5, and 0.

398

Here we have to multiply CB with X1,

399

so 0 into minus 1 by 2, which gives us 0 plus 5 into 3 by 2 plus 0 into 1.

400

Now here we write 0 into minus 1 by 2 plus 5 into 3 by 2 plus 0 into 1.

401

Then give the minus sign from formula and in the CJ row we can see the value of C1 is 3.

402

So we write 3 here and finally the value of Z1 minus C1 will be 9 by 2.

403

So, in this row, here we will write 9 divided by 2.

404

Now, in the same way we will find out value of Z2 minus C2.

405

The formula will be CB into X2 minus C2.

406

Here we will have 0 into 2, which gives us 0, plus 5 into 0,

407

which gives us 0, plus 0 into 4, which gives us 0.

408

So, the value of CB into X2 will be 0, minus, the value of C2 is, 2.

409

And finally, the value of Z2 minus C2 will be, minus 2.

410

So, in this row, here we will write, minus 2.

411

Now, in the same way we will find out value of Z3 minus C3.

412

First multiply CB into X3.

413

Here we will have, 0 into 0, which gives us 0, plus,

414

5 into 1 which gives us 5 plus 0 into 0 which gives us 0.

415

So, the value of CB into X3 will be 5 minus the value of C3 is 5.

416

And finally, the value of Z3 minus C3 will be 5 minus 5 equals to 0.

417

So, in this row, here we will write 0.

418

Similarly for Z4 minus C4, here we will have 0 into 1, which gives us 0, plus 5 into 0,

419

which gives us 0, plus 0 into 0, which gives us 0.

420

So the value will be 0, minus the value of C4 is 0, and finally the value of Z4 minus C4 will be 0.

421

So in this row, here we will write 0.

422

For Z5 minus C5, here we will have 0 into minus 1 by 2, which gives us 0, plus 5 into 1 by 2,

423

which gives us 5 by 2, plus 0 into 0, which gives us 0.

424

So the value will be 5 by 2 as the other values are 0, minus the value of C5 is 0.

425

And finally, the value of Z5 minus C5 will be 5 by 2.

426

So, in this row, here we will write 5 by 2.

427

And, for Z6 minus C6, here we will have 0 into 0, which gives us 0, plus 5 into 0,

428

which gives us 0, plus 0 into 1, which gives us 0.

429

So, the value will be 0, minus, the value of C6 is 0.

430

And finally, the value of Z6 minus C6 will be 0.

431

So, in this row, here we will write, 0.

432

Now, we have found out the values for ZJ minus CJ and filled up this row.

433

Here we can see a negative value of ZJ minus CJ, which is, minus 2.

434

We will indicate this negative value of minus 2 by an arrow, and this column will be the key column.

435

The variable X2 will be the incoming vector.

436

Now, on this side we will make a column for the calculation of minimum ratio.

437

The formula for minimum ratio is xp divided by the key column

438

and the value of key column has to be greater than 0.

439

Here, the key column is x2.

440

So, we will divide the values of column xp by the values of key column x2 for calculating minimum ratio.

441

For the first row, xp is 200 and value of x2 is 2.

442

So, we divide 200 by 2.

443

The minimum ratio will be 100.

444

For the second row, xp is 230 and value of x2 is 0.

445

Since the value of the key column is 0 in this row, we will not calculate the minimum ratio for this row

446

because we said earlier that the value of key column has to be greater than 0.

447

It cannot be 0 or less than 0.

448

Now, for the third row, xp is 420 and value of x2 is 4.

449

So, we divide 420 by 4, the minimum ratio will be 105.

450

Now between these two values 105 and 100, the minimum value is 100.

451

We will indicate this minimum value of 100 by an arrow and this corresponding row will be the key row.

452

This variable s1 will be the outgoing vector.

453

And this common element between this key row and key column is called key element.

454

Here, 2 is the common element between key row and key column, so 2 is the key element.

455

So in this first iteration simplex table, this is the key column, x2 is the incoming vector, this is the key row,

456

s1 is the outgoing vector and this common element 2 is the key element.

457

Now, we will make the second iteration table.

458

So here we have the simplex table for second iteration.

459

The value of cj row will remain same because the cost of the objective function has remained same.

460

So, we will copy and write the value of cj from the first iteration table to this new table.

461

Here we will write 3, 2, 5, 0, 0 and 0.

462

In the basic variable column, in the first iteration table we had s1, x3 and s3.

463

Here, S1 is the outgoing vector and in place of S1, the incoming vector is X2.

464

So in place of S1, we will write X2.

465

Here we have written the basic variables X2, X3 and S3.

466

So we have replaced S1 by X2.

467

Now we will write the cost of these variables here.

468

So, the cost of X2 is 2, the cost of X3 is 5, and the cost of S3 is 0.

469

Now, we have to fill up the rest of this table by doing the calculations.

470

In the first iteration table, we saw one method of finding the values.

471

In the first method we cross multiplied the old values to get new values.

472

Now in this second iteration table, we will see another method of calculating the values to fill up the table.

473

In this second method we will find out the values by doing some row operations and column operations options,

474

you can either use the first method or this second method that we will see now, whichever seems easier to you.

475

So, for the first row, we will divide all the values of the key row by the key element.

476

So we divide 200 by the key element 2 which gives us 100,

477

divide minus 1 over 2 by the key element 2 which gives us minus 1 by 4,

478

then divide key element 2 by 2 which gives us 1.

479

Here we will have 0, then 1 by 2, minus 1 by 4, and 0.

480

So, why did we divide this whole row by 2?

481

Since, this is the key row, here we have the key element.

482

When we make the new table, the key element has to be changed and written as 1.

483

Now if we divide the key element 2 by 2, then in the second iteration table we will get 1 in the same position.

484

Again, since we cannot divide just one element from the row,

485

So we divided the whole key row by 2 and got this new row in the second iteration table.

486

As we can see here, the key element 2 has been converted into 1 in this new table.

487

So, we have shown the key element of this key column as 1 in this new table.

488

Now, we have to show the other two elements of the key column as 0.

489

Now, this second value of the key column is already 0.

490

So we don't have to change anything in this row to make it 0 row,

491

we will write this row in the new table as it is written here.

492

So, here we write 230, 3 by 2, 0, 1, 0, 1 by 2, and 0.

493

So, the first element of the key column has been converted to 1.

494

The next element is 0.

495

Now, the third element of the key column is, 4.

496

We have to do some row operation to convert 4 to 0 in this new table.

497

So, the row operation for For this third row will be R3 dash equals to I3 minus 4 R1.

498

We will use R1 to solve this operation.

499

Because R1 was the key row in the previous table, we have to get 0 in the position of 4 here.

500

So, in this row operation, we will multiply this new first row by 4 and then subtract from the old column's third row.

501

Let's see in rough.

502

To get the new row 3, our 3 dash, first we will write the old row 3,

503

421, 400, 00, and 1.

504

So, this is our 3.

505

Then we multiply this new row 1, by 4, and write here, so, 4 into 100, gives us,

506

400, 4 into minus 1 by 4, gives us, minus 1.

507

Then we have 4, 0, 2, minus 1, and 0.

508

So, this is 4 R1.

509

Now, subtract 4 R1 from R3.

510

We get 20, 2, 0, 0, minus 2, 1, and 1.

511

So, this is R3 dash, or the new R3 row.

512

Now, we will put this values of new R3 row.

513

20, 2, 0, 0, minus 2, 1, and 1.

514

Now, if we look carefully, in this table, the basic variables are x2, x3, and s3.

515

If the x2, x3, and s3 columns are arranged in the same serial, we should get an identity matrix as we have seen earlier.

516

Here, the first basic variable is x2, in the x2 column we have 1, 0, 0.

517

Now, the second basic variable is x3, in the x3 column we have 0, 1, 0.

518

And the third basic variable is s3, in the s3 column we have 0, 0, 1.

519

Now if we arrange the columns of x2, x3 and s3 serially, we will get an identity matrix form like this one.

520

Now we will find the values for the zj minus cj row.

521

We have seen how to calculate ZJ minus CJ in the previous two tables, so let's calculate them quickly.

522

For the calculation of Z1 minus C1, here we have to multiply CB with X1.

523

So, 2 into minus 1 by 4 plus 5 into 3 by 2 plus 0 into 2.

524

Then we will solve it.

525

And in the CJ row, we can see the value of C1 is 3.

526

So, we will subtract 3 from the value of CB into X1.

527

And finally, the value of Z1 minus C1 will be 4.

528

So, in this row, here we will write 4.

529

Now, in the same way we will find out value of Z2 minus C2.

530

First we have to multiply CB with X2.

531

So, 2 into 1 plus 5 into 0 plus 0 into 0.

532

Then we will solve it.

533

And in the CJ row, we can see the value of C2 is 2.

534

So, we will subtract 2 from the value of CB into X2.

535

And finally, the value of Z2 minus C2 will be 0.

536

So, in this row, here we will write 0.

537

If you want you can write the detailed calculation in rough and check the values.

538

Since we have seen the detailed calculations for Zj minus Cj in the previous tables, we are solving quickly now.

539

So, in the same way we will find out value of Z3 minus C3, first multiply Cb into x3.

540

Here we will have 2 into 0 plus 5 into 1 plus 0 into 0.

541

So, the value of CB into X3 will be 5 minus the value of C3 is 5.

542

And finally, the value of Z3 minus C3 will be 5 minus 5 equals to 0.

543

So, in this row, here we will write 0.

544

Similarly for Z4 minus C4, here we will have 2 into 1 by 2

545

which gives us 1 plus 5 into 0 which gives us 0 plus 0 into minus 2 which gives us 0.

546

So the value will be 1 minus the value of C4 is 0

547

and finally the value of Z4 minus C4 will be 1.

548

So in this row here we will write 1.

549

For Z5 minus C5, here we will have 2 into minus 1 by 4 plus

550

5 into 1 by 2 plus 0 into 1 minus the value of C5 is 0.

551

And finally, the value of Z5 minus C5 will be 2.

552

So, in this row, here we will write 2.

553

And, for Z6 minus C6, here we will have 2 into 0, plus 5 into 0, plus 0 into 1,

554

minus, the value of C6 is, 0.

555

And finally, the value of Z6 minus C6 will be 0.

556

So, in this row, here we will write, 0.

557

So, we have found out the values for Zj minus Cj, and filled up this row.

558

Now, if we look at the values of ZJ minus CJ, all these values are either greater than 0,

559

or equal to 0, there is no negative value of ZJ minus CJ here,

560

since, all the values of ZJ minus CJ are greater than or equal to 0, that is, they are all positive values,

561

so, we can say that our solution has reached the optimal stage.

562

Finally we will write, since, all values of ZJ minus CJ are greater than or equal to 0, the solution is optimum.

563

Then we will write the values of X1, X2, and X3 from the basic variables.

564

Here we can see that, value of X2 is 100, value of X3 is 230, and there is no X1.

565

So we write x2 equals to 100, x3 equals to 230 and x1 equals to 0.

566

Now in our objective function we had maximize z.

567

So we will calculate max z here.

568

The formula of max z will be cb into xp.

569

Now we will multiply values of cb with xp and then we will add them.

570

In CB column here we have 2, 5 and 0 and in the xp column we have 100, 230 and 20.

571

So, we will write CB into xp equals to 2 into 100 plus 5 into 230 plus 0 into 20.

572

The answer will be 1350.

573

Thus, the optimum value of max z is 1350.

574

So, in this lecture we have solved a maximization problem by simplex method.

575

In the next lecture we will solve a minimization problem by simplex method.

App herunterladen

Alles, was du zum fließenden Sprechen brauchst

KI-AussprachebewertungJeder Satz bewertet

IPA-TrainingJeden Laut meistern

WortschatzBaue deinen Wortschatz auf

VokabelspielSpielend lernen

QR scannen

Download on theApp Store Get it onGoogle Play

Gleicher Kanal

Types Of Manufacturing Processes (Job Shop, Batch, Mass, Flow, Process Type Manufacturing Processes)

Daily ConversationUniversity Students

Manufacturing Defined - What Is Manufacturing?

Daily ConversationUniversity Students

Meaning and Procedure of Production Planning & Control (PPC)

Daily ConversationUniversity Students

FOR YOU

Empfohlenes Video

110 Sätze

Rate Limiter System Design in Under 60 Seconds #techprep #programming #systemdesign

Daily ConversationUniversity StudentsWorking Adults

34 Sätze

How to Work SMARTER Not HARDER in 2 Minutes

Daily ConversationUniversity Students

61 Sätze

[Practice Problems] Regular Expressions (Regex) - Visually Explained

Daily ConversationUniversity Students

532 Sätze

Marxism vs libertarianism: The economic calculation problem

Daily ConversationUniversity StudentsWorking Adults

182 Sätze

We Let $200 GPT-Pro Think for 7 Days on Unsolved Math

Daily ConversationUniversity StudentsWorking Adults

130 Sätze

► 2. СВОЙСТВА МАССИВОВ. Функции автозаполнения | Курс по Numpy.

Daily ConversationUniversity Students

181 Sätze

The Limit (do not use L'Hospital rule)

Daily ConversationUniversity Students

111 Sätze

Executing Monitoring, Evaluation and Learning (MEAL) | Complete Practical Guide

Daily ConversationUniversity StudentsWorking Adults

Wortschatz und Sprechhinweise zu dieser Lektion

Diese Sprechübung basiert auf dem Video „Lec-6 Simplex Method“. Diese Wörter kommen am häufigsten vor: value, minus, table, row, key. Dieses Video enthält 575 Sätze und 6973 Wörter zum Nachsprechen. Der gesprochene Teil dauert 49:14. Der Sprecher spricht gleichmäßig mit etwa 142 Wörtern pro Minute – ein angenehmes Tempo fürs Shadowing. Nur 80 % der Wörter gehören zu den 3.000 häufigsten im Englischen, der Wortschatz ist also anspruchsvoll.

Wichtiger Wortschatz in diesem Video

15 lernenswerte Wörter aus dem Video, mit Aussprache und Bedeutung:

Wort	Aussprache	Bedeutung
minus	/ˈmaɪ.nəs/	weniger, minus
column Substantiv	/ˈkɒləm/	Säule
variable Adjektiv	[ˈvæɹ.i.ə.bl̩]	variabel
element Substantiv	/ˈɛləmənt/	Element
divide Verb	/dɪˈvaɪd/	aufteilen, teilen
ratio Substantiv	/ˈɹeɪ.ʃoʊ/	Verhältnis
calculation Substantiv	/ˌkælkjuˈleɪʃn̩/	Berechnung, Kalkulation
formula Substantiv	/ˈfɔː.mjʊ.lə/	Formel
calculate Verb	/ˈkælkjʊleɪt/	kalkulieren, berechnen
slack Adjektiv	/slæk/	schlaff, lose
vector Substantiv	/ˈvɛktɚ/	Vektor
arrow Substantiv	/ˈæɹəʊ/	Pfeil
equation Substantiv	/ɪˈkweɪ.ʒən/	Ausgleich, Gleichgewicht
indicate Verb	/ˈɪndɪˌkeɪt/	anzeigen, anweisen
solve Verb	/sɒlv/	lösen

Phrasal Verbs, die du hören wirst

Wort	Bedeutung
find out Verb	herausfinden, erfahren
fill up Verb	anfüllen, auffüllen
move forward Verb	vorantreiben, vorwärtstreiben

Grammatik in diesem Video

Die Strukturen, die der Sprecher am häufigsten verwendet, mit den genauen Worten aus dem Video:

Struktur	Im Video
Present Perfect have/has + Partizip Perfekt – eine vergangene Handlung, die jetzt noch wichtig ist	have seen · have introduced · have written
Passiv be + Partizip Perfekt – wichtig ist, was geschieht, nicht wer es tut	is given · is written · is also known

Aussprache, auf die du achten solltest

Der Sprecher verwendet 5 Kurzformen und abgeschwächte Formen, zum Beispiel don't, haven't. Sprich sie in der kurzen Form, so wie du sie hörst.

Die Laute „sh“ und „zh“: ratio /ˈɹeɪ.ʃoʊ/, calculation /ˌkælkjuˈleɪʃn̩/, equation /ɪˈkweɪ.ʒən/, dash /ˈdæʃ/, iteration /ˌɪt.əˈɹeɪ.ʃən/
Lange Wörter – auf die Betonung achten: similarly /ˈsɪm.ə.lə.li/, applicable /əˈplɪk.ə.bəl/, imaginary /ɪˈmæd͡ʒɪˌn(ɛ)ɹi/, iteration /ˌɪt.əˈɹeɪ.ʃən/, diagonally /daɪˈæɡ.nə.li/

Laute, die Deutschsprachigen schwerfallen:

/w/ — mit runden Lippen, nicht wie das deutsche „w“ (/v/): equation /ɪˈkweɪ.ʒən/, whichever /wɪt͡ʃˈɛvɚ/
Stimmhafter Auslaut — /b/, /d/, /g/, /z/, /v/ am Wortende nicht verhärten: divide /dɪˈvaɪd/, solve /sɒlv/, objective /ɒbˈd͡ʒɛk.tɪv/, columns /ˈkɑləmz/, correspond /ˌkoɹəˈspɑnd/
/æ/ — offener als „ä“: variable [ˈvæɹ.i.ə.bl̩], calculation /ˌkælkjuˈleɪʃn̩/, calculate /ˈkælkjʊleɪt/, slack /slæk/, arrow /ˈæɹəʊ/

So übst du mit diesem Video

Höre dir das ganze Video einmal an, ohne zu sprechen, und notiere die Wörter, die du nicht kennst.
Sprich Satz für Satz in normaler Geschwindigkeit nach und wiederhole jeden, bis dein Rhythmus zum Sprecher passt.
Nimm dich auf und vergleiche mit dem Original; achte dabei auf Wörter wie minus, column, variable.

Was ist die Shadowing-Technik?

Shadowing ist eine wissenschaftlich fundierte Sprachlerntechnik, die ursprünglich für die professionelle Dolmetscherausbildung entwickelt und durch den Polyglotten Dr. Alexander Arguelles populär gemacht wurde. Die Methode ist einfach aber wirkungsvoll: Du hörst englisches Audio von Muttersprachlern und wiederholst es sofort laut — wie ein Schatten, der dem Sprecher mit nur 1–2 Sekunden Verzögerung folgt. Anders als passives Hören oder Grammatikübungen zwingt Shadowing dein Gehirn und deine Mundmuskulatur, gleichzeitig echte Sprachmuster zu verarbeiten und zu reproduzieren. Studien zeigen, dass es Aussprachegenauigkeit, Intonation, Rhythmus, verbundene Sprache, Hörverständnis und Sprechflüssigkeit signifikant verbessert — was es zu einer der effektivsten Methoden für die IELTS Speaking-Vorbereitung und reale englische Kommunikation macht.

Shadowing-Technik: die vollständige Schritt-für-Schritt-Anleitung lesen →

Shadowing-Übung: Lec-6 Simplex Method | Maximization Problem | Mathematical Example Solution | Operations Research - Englisch Sprechen Lernen mit Video

Übungsmodus wählen

App herunterladen

Types Of Manufacturing Processes (Job Shop, Batch, Mass, Flow, Process Type Manufacturing Processes)

Manufacturing Defined - What Is Manufacturing?

Meaning and Procedure of Production Planning & Control (PPC)

Two Sum - Leetcode 1 - HashMap - Python

SAC | Soft Actor Critic (SAC) architecture | SAC Explained

How does modular construction impact costs?

LET THERE BE... Voltage? | Maxwell's Equation #2 Explained for Beginners

Rate Limiter System Design in Under 60 Seconds #techprep #programming #systemdesign

How to Work SMARTER Not HARDER in 2 Minutes

[Practice Problems] Regular Expressions (Regex) - Visually Explained

Marxism vs libertarianism: The economic calculation problem

We Let $200 GPT-Pro Think for 7 Days on Unsolved Math

► 2. СВОЙСТВА МАССИВОВ. Функции автозаполнения | Курс по Numpy.

The Limit (do not use L'Hospital rule)

Executing Monitoring, Evaluation and Learning (MEAL) | Complete Practical Guide

Wortschatz und Sprechhinweise zu dieser Lektion

Wichtiger Wortschatz in diesem Video

Phrasal Verbs, die du hören wirst

Grammatik in diesem Video

Aussprache, auf die du achten solltest

So übst du mit diesem Video

Was ist die Shadowing-Technik?