쉐도잉 연습: If I Started Over as an Electrician, I’d Buy These 15 Tools - 영상으로 영어 말하기 배우기

연습 모드 선택

각 모드는 전체 화면 연습실로 열립니다.

311 문장
문장이 너무 짧거나 길면 Edit를 눌러 조정하세요.
1
After 20 years as an electrician, if I had to start again tomorrow, these are the 15 tools that I would buy.
2
Now, this video is sponsored by Fluke.
3
We're going to talk about them a little bit later on.
4
And hey, if you want a nice little discount at fluke .com, use my code Carl12 for 12 % off.
5
Now, this isn't every tool you're ever going to need, but this is enough to get you started so that
6
when you start realizing what you actually do need and what you want to carry with you all the time, you'll be able to do that.
7
Now, here are my conditions for these tools.
8
First of all, I am ignoring all of the apprenticeship lists that are out there because, again, they're different across the country
9
i'm excluding any power tools those things could be you know either supplied to you people have preferences one way
10
or the other no power tools on the table here
11
and everything here has to be well useful years from now now let's start in the beginning
12
and you may not consider it a tool
13
but a good tool pouch now it depends on what you like i've always recommended going with the tool backpack
14
or something that closes up just for security purposes okay this one's open
15
because this is the one that i use at home
16
and i can reach in quickly i can grab what i need i can kind of drop it back in there,
17
not have to worry about it.
18
The problem is if you leave this laying out on some job sites, people may go along and say,
19
oh, look, a $60 pair of lineman pliers.
20
Let me grab those.
21
You just never know.
22
And so I think that having a backpack or something that closes and zips shut, it keeps that temptation away.
23
And also a backpack allows you to walk in with two free hands.
24
It allows you to climb ladders, do a lot of things and get into a lot of places that a normal tool bag wouldn't.
25
However, if this is more appealing to you
26
and you like the more tote style there are
27
so many different tool bags out there it's insane now
28
which brand should you buy honestly I don't think it really matters all
29
that much in the beginning especially
30
if you just go with something that's decent enough that'll hold your stuff eventually you'll learn what you want
31
and then you'll be able to figure it out or
32
if you're like me 20 years down the road
33
you still won't have it figure it out a great headlamp
34
this allows you to have both hands free a lot of them like this one here
35
this is a Milwaukee has a couple of different beam modes on it so
36
if you turn it on you can get spotlight you can get
37
you know you can dim it down you can have combinations of the two it's pretty cool
38
and uh they last for a long time this one's rechargeable it's a little bit older
39
but it still works just fine that's my initials on there make sure you initial everything you have too just so that
40
if you have the same thing as your co -worker
41
you don't get them mixed up next up a torpedo level get one with rare earth magnets get one
42
that allows you to put
43
it on a piece of conduit these are great for leveling
44
boxes for using with pipe for using with almost anything i mean you're not going to do framing with this
45
but getting a good one makes a big difference
46
and actually somebody called out my last tool video saying
47
that they make ones with illuminated bubbles now which is amazing
48
because a lot of times you know you'll put this up
49
and you'll look at it
50
and you kind of have to squint at it for a little
51
while but with an illuminated bubble i gotta get on
52
that train because that sounds awesome next up is a good tape measure get a decent one
53
but don't spend a ton of money
54
i mean the stanley fat max has always been kind of the standby i always go with a 16 footer
55
when i'm working indoors for everything else
56
or even utility rooms i go with the 25 you know just a little bit of weight savings
57
and they're a little bit smaller the 16 usually works good for most of the stuff
58
that we're doing but the 25 is always good to have
59
but i'll tell you what recently i've actually started using this this is a bosch
60
but i mean a lot of companies make these sort of laser range finders
61
it makes keeping track of your measurements really simple
62
you could do things like area you could do a lot of funky stuff with this
63
that I'll honestly never do but
64
when it comes to longer distances say you're trying to figure out what dimensions a room is
65
and it's a really big room this gets
66
you really really really close matter of fact probably within the margin of error of a tape measure
67
so this is not a required item but this is the one
68
that I've actually found that I'm starting to gravitate towards
69
but I always still have my trusty old tape measure cutting
70
now you're going to be doing a lot of cutting a good knife is essential
71
I usually like the green kind of slide out knives
72
but a lot of people like the milwaukee fastback seems like everybody
73
i know is carrying those now this is i mean
74
i kind of i pick these up these are like in the the aisle
75
when you're leaving home depot you know the the husky kind of folding ones the reason
76
i get the cheap ones sometimes like this or like the stanley
77
that i showed you before is that i lose them
78
and i don't really cry
79
when i lost like a you know an inexpensive knife now the great thing about these is
80
that they hold a couple of extra blades they are replaceable
81
and there's nothing like a nice sharp knife
82
when you're cutting down you know whatever it is a sharp knife is actually more safe than a dull knife
83
if you were in boy scouts you probably remember that
84
but anyway pick your poison pick the one you like my advice though would be don't go super expensive
85
because you're probably either going to lose it or
86
if it's really expensive it may get stolen
87
so go with something that's you know decent
88
but not super duper expensive either diagonal cutters uh i call these angle cutters by accident in my last video
89
but you get the idea i've actually had these for quite a
90
while they're some of my favorites nitpex is a favorite brand of mine.
91
They are expensive.
92
They are not necessary.
93
You can certainly go with something a little bit less expensive to begin with if you don't have the budget.
94
Um, these are something that I bought one at a time and then, you know, kept on using.
95
And if anybody touches my Nipex, I get really upset, but these are great because number one, if you get the one with the angle,
96
you could pop out, uh, staples and things like that.
97
It's just really good for prying things up and so uh those those are Those are usually in most apprentice toolkits.
98
Next up, wire strippers.
99
And again, I wouldn't recommend going with these for your first ones.
100
They are very expensive.
101
They're awesome.
102
There's no doubt about it.
103
These actually can do a lot of the things that your alignment pliers can do in a pinch.
104
So let's say you're going up a ladder and you only have room for one or whatever it is.
105
Or you just want to keep something on you all the time that does mostly everything.
106
These are awesome.
107
What I like about these is that they have, you know, you got your 632, 832 cutters you have a large cutter in the middle here
108
which can be good for bigger wire
109
and of course you have listed out marked on it 12 gauge 10 gauge stranded solid
110
and then a nice big flat needle nose on the end of it they are just
111
so useful again i think these actually get close to the lineman pliers
112
when it comes to sheer utility for the lineman pliers i have a whole bunch still matter of fact
113
that I use and these are my favorites the nice thing about these
114
and the reason that I bought these these are probably my second
115
or third pair I mean you occasionally you blow them up
116
or whatever they get lost some of them are probably above
117
an acoustical grid ceiling somewhere what I like about these is the insulation on the the the handles is not
118
so big that it becomes bulky
119
and um everything about them is just really really nice
120
they drop right open the way a good pair of you know broken in linemen's should
121
and you'll learn that the lineman pliers are basically good for everything what the things
122
that they tell you they can do it's like wd -40 you just scratch the surface these are a hammer
123
and you don't have to go with nippex of course like i said
124
they're very expensive uh klein is just fine greenly whatever i have a whole bunch south wire just
125
because you know sometimes you don't want to bring out the nice stuff
126
or whatever it is maybe you're doing demo i don't know
127
but you don't have to go with the super expensive stuff tongue
128
and groove pliers these do something
129
that none of those other pliers can do these are also really good
130
because they're high leverage so you can grab onto something
131
and i mean there's great video out
132
there of the nipex ones where somebody's standing on them i mean they actually hold on
133
that well the nipex cobra are amazing pliers these are the channel lock pliers they're great too
134
and they've had these forever and i don't change what isn't broken
135
but the cobras are incredible these are good don't go too crazy these aren't something
136
that you're going to be using all
137
that much the thing that's going to be in your hand most of the time is the lineman pliers.
138
Next up, a multi -bit screwdriver.
139
Now, I've talked about this before, but this is the 11 -in -1.
140
I actually prefer the 5 -in -1.
141
I know that 11 tools sounds better than 5, and usually it is, but the 5 -in -1 is a little bit smaller.
142
It doesn't tend to lose these little pieces as easily.
143
This is great, and I still have it.
144
As you can see, I'm still using it, so I'll use whatever I bought,
145
but if I was going to recommend one of the two to somebody, I would say get the 5 -in -1s.
146
They cover almost all of your bases you have your phillips head you have your flat head
147
and then even on some of them um i think it depends on
148
which one you get you get a square drive
149
which is really good too and um you know
150
so you can actually put different bits in there
151
if you really want to but this is something
152
that you keep on you at all times so
153
that i'd say with your lineman pliers it's kind of like your your little mini tool kit
154
that you never want to be without next up a a flat blade screwdriver
155
now this is kind of like i i keep one of these with me
156
because this is kind of like my demo screwdriver
157
and you can see i've kind of bashed in the back of this a little bit
158
i got some fs1 on there
159
and stuff these are great for knocking out concentric knockouts for prying things they're small enough
160
that you know you can get in there
161
and use just for a little extra torque
162
when you're kind of you know making a termination
163
and maybe this is just a bit too weak for you
164
or whatever before i did recommend getting a panel
165
or a plate screwdriver something that's really small
166
but most of the time the multi -bit will come with a tiny little screwdriver
167
or a flat blade that you can use for plates
168
which is just fine now you can buy great screwdriver kits
169
that have all the different sizes in them but
170
when it comes to just simplicity
171
and actually what you're going to use day to day the multi -bit
172
and a big flat blade will really get you there
173
and of course a hammer you're going to need one of these no doubt about it
174
because if you're doing residential and you're sending home staples
175
if you're just doing anything where you need to set things into wood
176
i mean a hammer is probably the most recognizable tool of tools
177
and it's because it is
178
so useful now for electricians typically they they recommend you get one with a fiberglass handle just to make sure
179
that if you're coming in contact with anything that's live it's not going to go through the handle
180
and into you most of the time they come with rubberized handles
181
and stuff like that but this is just a true temper
182
that i've had forever and that's that's what i mean though you just keep this with you
183
and it's there when you need it
184
but you're going to want to put this thing into a hammer loop
185
and walk around all day probably not
186
but there's not really anything else on the table
187
that will do what a good hammer will do now let's get into the testing section like i mentioned
188
this this is sponsored by fluke
189
but i've been using fluke for a long time my first fluke meter i got
190
when i was a mechanic i still have it it still works and And...
191
i've been using their stuff ever since actually
192
i did buy a cheaper meter for my first day on the job
193
because i was buying other tools and i decided to go cheaper on a meter
194
and uh my journeyman told me to get it off the job he didn't want me to use
195
that at all and
196
so he said you know here use my fluke until you get a real meter
197
so um the thing with fluke was
198
that traditionally it was very expensive fluke stuff is not cheap
199
and um you know you're talking a lot of investment
200
there are a few things you're going to need to know
201
if you're going to be working with electricity the first thing is is electricity even present in
202
that conductor or that panel
203
and that's where this little tick tracer comes in i actually have an old one
204
that i've had for a long time most of the writing is kind of worn off of it
205
but i mean i have this this is an older it's the same thing
206
but this is the one that most of the time most electricians will keep in their chest pocket
207
and um this is there's really no there's no nothing better in my opinion
208
this thing is like your first line of defense like i said
209
when it comes down to it these three these these three things here
210
that's what i have on me all the time the other ones may be as needed
211
but these three things here will will do most of what you need to do anyway
212
so it has a tick tracer right here now that's just a non -contact voltage tracer it will tell you
213
if power is there or
214
if it is not that's basically all it'll do won't tell you what kind of power
215
it is it won't tell you anything else about it it'll just tell you
216
if it's there the next thing your receptacle tester on this side here
217
that is going to tell you whether that receptacle
218
that you're looking at is wired correctly it'll be able to test gfci
219
it even has a little beeper function on it
220
so you know back in the day you know what we used to do we would plug in a radio
221
and when you're trying to trace out a circuit you plug in the radio you turn it up
222
so you can hear it from the basement you go to the basement
223
and you just start flipping breakers and
224
when the radio turned off well that's got to be
225
that circuit well luckily with these you don't have to do
226
that so you know you can get different tracing material testers
227
and stuff like that which are really cool and very useful
228
but this right here there's not really anything else
229
that will do what this will do at a glance
230
when it comes to commissioning a building just making sure
231
that your work is correct or even just general troubleshooting oh look at
232
that your gfci isn't resetting uh but you have the line
233
and loader reversed or whatever it is there you go there's
234
that and then you got the main event
235
and that's this right here that's a clamp meter now it's kind of cool
236
that they did this because i thought if they were going to really kind of go a little bit less expensive,
237
they were going to go with a regular old pocket meter without a clamp.
238
But having an amp clamp like this is so handy, and it allows you to basically do non -contact voltage testing,
239
which is the reason you have that.
240
Don't make the mistake of putting this clamp around, you know, say an entire piece of SJO cord, or, you know, like a extension cord,
241
it's not going to work like that.
242
But when it comes to individual conductors, let's say you're inside of a panel, and you can grab an individual conductor,
243
that's what this is for now this will also do it'll do voltage it'll do amperage it'll do continuity
244
this will do all of the basic things
245
that you're going to start off doing
246
and even like further into your career having just a first pass kind of meter like this before maybe
247
you get something out that's a little bit more complex like this well that's always good to have
248
because again you can keep it on you you can keep it in a bag whatever it is
249
so it's readily available then when you got to break out the big guns that's fine
250
because i'm not telling you
251
that this is going to be the last meter you're ever going to need
252
but over time you're going to figure out what you want in a meter
253
and get you into the fluke ecosystem
254
which is honestly the most respected electrical testing stuff out there
255
and i'm going to be giving this away
256
that's why i didn't take any of these things out to show you i'm going to leave them in here
257
so that they're still fresh
258
when the winner gets them now we're not going to do any kind of crazy drawing
259
or anything like that
260
and there's really no way for me to vet out who's going to get this
261
but i ask that you know maybe if you're a diy person
262
or a handyman or you're a little bit later in your career
263
and you don't need
264
this please just just go on to the next thing we'll do giveaways for other stuff in the future
265
but for this right here i would like to give this away to somebody who's just starting out
266
so let's say you're in your first couple years in your apprenticeship program
267
or maybe you're just getting into one
268
and this is why you're watching this video you're trying to figure out the tools
269
that you need you're who i would like to give this away to
270
and the way that you can let me know
271
send me an email
272
that's what we're going to do we're not going to do
273
some big giant thing um just send me an email tell me
274
you know where you are where you're located you're the year
275
that you're in um
276
and that's it there's nothing we don't have to get crazy with this kind of stuff
277
i just really want to give this to somebody who's going to be able to use
278
it look i'll tell you this much electrical has treated me very well
279
i remember standing by my toolbox as a mechanic being
280
so frustrated that i was i was not going where i wanted to go
281
and i had no way out of it i didn't have a four -year degree,
282
a diploma, any kind of training that I could transfer and make a lot of money.
283
And I looked at the guys who I was working with and I said, man, that's not the life that I want.
284
And I was so frustrated and I just, I had enough that when I left work that day,
285
I decided to be an electrician on my way to the tech school.
286
And I decided then I was like, all right, well, that's what I'm going to do.
287
And that was about 21 years ago.
288
and it has been a career that has brought me to so many different places.
289
I've met so many different people, and it's allowed me to provide a great life for my family,
290
and I'm very thankful to have gotten into this trade.
291
So this is really near and dear to my heart, and I think that if somebody else is starting along that path,
292
I want to do what I can to help you out.
293
A lot of people are looking to get into the trades now.
294
That's what I've started to transition my channel into talking more about is work wear
295
and the stuff
296
that people who are working with their hands are actually using by showing you the mistakes that I've made over the years.
297
And so more than anything, I want to set people off on the right foot
298
and get them started with maybe advantages that I didn't have
299
when I was starting off because it can be a great career.
300
And it's one that I owe a lot to.
301
So anyway, thank you so much for watching.
302
Let me know what you think.
303
I mean, is there anything I'm missing here?
304
I bet you there's something here that somebody goes, nah, nah, nah, you don't need that.
305
What you need is this.
306
And I'd like to hear from you in the comment section.
307
Anyway, thank you so much for watching.
308
Thank you to Fluke for sponsoring this video.
309
They have been the best sponsor I've worked with and probably the most appropriate.
310
So thank you so much to them.
311
And I'll catch you next time.

앱 다운로드

유창하게 말하는 데 필요한 모든 것

AI 발음 평가문장마다 점수 확인
IPA 발음 연습모든 소리 마스터
단어 학습나만의 단어장 만들기
단어 게임놀면서 외우기
FOR YOU

추천 영상

이 레슨의 어휘와 말하기 포인트

이 말하기 레슨은 영상 “If I Started Over as an Electrician, I’d Buy These 15 Tools”을(를) 바탕으로 합니다. 이 영상에는 섀도잉할 문장 311개와 단어 3875개가 있습니다. 말하는 구간의 길이는 16:07입니다. 화자는 분당 약 240단어로 빠르게 말하므로 연음과 약하게 발음되는 소리가 많습니다. 단어의 85%가 영어에서 가장 많이 쓰이는 3,000단어에 속합니다. 나머지는 연습 전에 미리 확인해 두세요.

이 영상의 핵심 어휘

영상에 나오는 익혀 둘 만한 단어 15개를 발음, 뜻과 함께 정리했습니다.

단어발음뜻
meter 명사/ˈmitəɹ/계량기
knife 명사/ˈnaɪ̯f/칼, 나이프
hammer 명사/ˈhæmɚ/망치, 마치
wire 명사/ˈwaɪɚ/철사
blade 명사/bleɪd/날
sponsor 명사/ˈspɒn.səː/스폰서
cutter 명사/ˈkʌtɚ/커터
voltage 명사/ˈvəʊltɪd͡ʒ/전압
conductor 명사/kənˈdʌktɚ/지휘자
backpack 명사/ˈbæk.pæk/배낭, 륙색
pocket 명사/ˈpɑ.kɪt/호주머니, 포켓
sharp 형용사/ʃɑɹp/날카로운
angle 명사/ˈæŋ.ɡəl/각, 각도
trace 명사/tɹeɪs/흔적, 자국
basement 명사/ˈbeɪsmənt/지하실

영상에 나오는 구동사

단어뜻
break out 동사탈출하다
go up 동사올라가다
turn off 동사끄다, 턴오프하다

이 영상의 문법

화자가 가장 많이 쓰는 문형을 영상 속 실제 표현과 함께 정리했습니다.

문형영상 속 표현
현재완료진행 have/has been + -ing — 전에 시작해 지금도 계속되는 동작i've been using
현재완료 have/has + 과거분사 — 과거의 일이 지금도 관련이 있을 때i've always recommended · has always been · i've actually started
수동태 be + 과거분사 — 누가 하는지보다 무슨 일이 일어나는지에 초점is sponsored · isn't broken · is wired
관계절 who / which + 절 — 사람이나 사물에 대한 추가 정보now which is · that which are · guys who I

주의할 발음

화자는 you're, don't, I've 같은 축약형과 약화된 형태를 130번 사용합니다. 들리는 대로 짧게 발음하세요.

  • “sh”와 “zh” 소리: sharp /ʃɑɹp/, extension /ɪkˈstɛnʃən/, transition /tɹænˈzɪʃ.ən/, occasionally /əˈkeɪʒənəli/, residential /ˌrɛzɪˈdɛnʃəl/
  • 긴 단어 — 강세 위치에 주의: electricity /ɪˌlɛkˈtɹɪsɪti/, electrical /ɪˈlɛktɹɪkəl/, utility /juːˈtɪlɪti/, occasionally /əˈkeɪʒənəli/, residential /ˌrɛzɪˈdɛnʃəl/

한국어 화자가 어려워하는 소리:

  • /f/ — ㅍ(/p/)으로 바꾸지 말고 윗니를 아랫입술에 대기: knife /ˈnaɪ̯f/, flip /flɪp/, preference /ˈpɹɛf(ə)ɹ(ə)ns/, fold /ˈfəʊld/, thankful /ˈθæŋkfəl/
  • /v/ — ㅂ(/b/)과 구별하기: voltage /ˈvəʊltɪd͡ʒ/, reverse /ɹɪˈvɝs/, leverage /ˈlɛv.(ə.)ɹɪd͡ʒ/, groove /ɡɹuv/, inexpensive /ˌɪnɪkˈspɛnsɪv/
  • /z/ — ㅈ이 아니라 성대를 울리는 /s/: transition /tɹænˈzɪʃ.ən/, residential /ˌrɛzɪˈdɛnʃəl/, laser /ˈleɪzɚ/, poison /ˈpɔɪ.zən/, zip /zɪp/

이 영상으로 연습하는 방법

  1. 먼저 말하지 않고 영상을 끝까지 듣고 모르는 단어를 적어 둡니다.
  2. 0.75배속으로 한 문장씩 섀도잉을 시작하고, 익숙해지면 보통 속도로 돌아갑니다.
  3. 자신의 목소리를 녹음해 원본과 비교하고, meter, knife, hammer 같은 단어에 특히 주의합니다.

쉐도잉이란? 영어 실력을 빠르게 키우는 과학적 방법

쉐도잉(Shadowing)은 원래 전문 통역사 훈련을 위해 개발된 언어 학습 기법으로, 다언어 학자인 Dr. Alexander Arguelles에 의해 대중화된 방법입니다. 핵심 원리는 간단하지만 매우 강력합니다: 원어민의 영어를 들으면서 1~2초의 짧은 지연으로 즉시 소리 내어 따라 말하는 것——마치 '그림자(shadow)'처럼 화자를 따라가는 것입니다. 문법 공부나 수동적인 청취와 달리, 쉐도잉은 뇌와 입 근육이 동시에 실시간으로 영어를 처리하고 재현하도록 훈련합니다. 연구에 따르면 이 방법은 발음 정확도, 억양, 리듬, 연음, 청취력, 말하기 유창성을 크게 향상시킵니다. IELTS 스피킹 준비와 자연스러운 영어 소통을 원하는 분들에게 특히 효과적입니다.

섀도잉 방법: 단계별 전체 가이드 읽기 →