Shadowing Practice: Concept of Electric Current with Train example | TheElectricalGuy - Learn English Speaking with Video

Choose a practice mode

Each mode opens a full-screen practice room.

183 sentences
If sentences are too short or too long, click Edit to adjust them.
1
Hello everyone, in this video we are going to learn about all of these Topics.
2
To understand what is electric current, it is very much important to understand what is atom and what is electron.
3
So first we will learn about that and then we will learn about electric current with our simple train analogy.
4
And this train example will make understanding of electric current very easy.
5
So to get all of these details in the easiest way you need to watch the video.
6
We have been listening right from our school that everything is made up of atoms.
7
Our body, this ball, a wooden shit Everything that we see in our daily life is made up of small small atoms.
8
As an electrical engineer, you may ask, why on earth I need to know about these atoms?
9
But believe me, learning few basic things
10
which I am going to tell you in next few minutes about atoms will help you to understand current
11
and the materials from electrical perspective more easily.
12
So moving on, every atom consists of three main parts i .e electrons, protons and neutrons.
13
Thank you.
14
Electrons has negative charge on them.
15
Protons have positive charge on them and Neutron as the name suggests they are neutral
16
which means they do not have any charge on them.
17
In an atom, proton and neutrons are very tightly bounded together and this tight bounding is known as nucleus.
18
As proton and neutron are very tightly bounded together, it is very difficult to add or remove any of the proton or neutron in an atom.
19
Actually the total amount of proton in an atom decides its elemental identity.
20
So if you can remove or add proton from an atom, you could actually change the type of metal.
21
And by using this formula, you can convert any metal into gold.
22
But we will leave that topic as that is not possible.
23
Moving on, like proton it is also not possible to remove or add neutron in an atom.
24
And adding or removing neutrons from an atom does not make any changes in its elemental identity.
25
So don't try that too.
26
However, electrons has freedom to move everywhere.
27
They are like free birds, they can even go to another atom if pushed out and we can do that with very less energy.
28
Electrons are like S -pole of a magnet and protons are like N -pole.
29
As we know, two similar poles of a magnet repel each other but two different poles attract each other.
30
and in similar way two particles with same charge will repel each other and particles with different charge will attract each other.
31
To be more clear two electrons which are negatively charged will repel each other and in same way
32
Two positively charged protons will repel each other.
33
But, the interesting part is, like two different poles of magnet, two particles with different charge will attract each other.
34
So negatively charged electrons are attracted towards the positively charged proton and vice versa.
35
Now you may ask a question, if electrons and protons are attracted towards each other, then in an atom there would be always attraction and repulsion going on.
36
The answer is no. To understand, look at this image carefully.
37
The image shows the basic construction of an atom.
38
Now, as you can see, there are four electrons and four protons are there in the above atom.
39
So for understanding purpose we will consider charge on electrons equal to -4.
40
as electrons are negatively charged and charge on proton are +4 as they are positively charged.
41
So, to get the net charge we must add these two charges.
42
So, +4 + -4 = 0.
43
With this, we came to an important conclusion that equal amount of proton
44
and electron in an atom cancel out the net charge and keeps the atom stable.
45
Atom is stable only if the number of protons are equal to number of electrons.
46
If I add or remove any electron from an atom, the atom will become unstable.
47
and it is now ready to give or take the electrons to another unstable atom and become stable again.
48
Let's say in our above atom I added one extra electron.
49
Now the net charge is positive 4 plus negative 5.
50
which is equal to -1.
51
The net charge is not zero which means the atom is unstable.
52
This atom will now try to lose one extra electron to another unstable atom and become stable again.
53
We call such unstable atoms as charged atoms.
54
Addition of electron in an atom makes it negatively charged and removal of electron from an atom makes it positively charged.
55
The atom is like this train.
56
In this condition the train is completely stable and not moving.
57
But if we add batteries to it and turn on the switch the train becomes unstable and start moving.
58
Now this train will keep on moving until the batteries gets dry completely or until we turn off the switch.
59
Adding batteries to the train and turning on the switch is equivalent to adding an extra electron in an atom.
60
As soon as we add battery and turn on the switch, the train starts and becomes unstable.
61
And in similar way, as soon as we add extra electron in an atom, it becomes unstable and try to lose the required electron.
62
Now let's learn about valence electron.
63
Ladies and gentlemen, this is important to understand conductor, insulators and semiconductors.
64
If you see this figure carefully, you will find that the atoms have different orbits which are shown by dotted lines.
65
The electrons in the last orbit are known as valence electrons.
66
The outermost orbit or also known as valence shell of an atom can have maximum 8 numbers of electrons.
67
And, the number of electrons in outermost orbit of an atom decides the electrical property of the material.
68
And hence, knowing this is important.
69
If the atom has less than 4 electrons in its outermost orbit then the material can be used as a conductor.
70
Examples are aluminium, copper etc. which has 3 and 1 electrons in their valence shell or the outermost orbit respectively.
71
If the atom has more than 4 electrons in its outermost orbit, then the material can be used as an insulator.
72
Nitrogen is one of the example of insulator which has 5 electrons in its outermost orbit.
73
If the atom has exactly 4 electrons in its outermost orbit,
74
then the material can be used as a semiconductor which has properties of both metal and nonmetal.
75
Well if you know how many electrons are there in an outermost orbit of an atom,
76
you also know if you can use that material as a conductor or as a insulator or maybe as a semiconductor.
77
free electrons.
78
The electrons in orbit near to the nucleus are tightly bounded to the nucleus.
79
However, the electrons in the orbit
80
which is away from the nucleus are loosely bounded with the nucleus as shown in the figure.
81
We can relate this concept to the magnet and a pin.
82
If the pin is near to the magnet it will experience more force
83
and moving this pin away from the magnet will take some extra energy.
84
But, if the pin is away from the magnet, the force will also be less
85
and now we can move this pin with very less energy as compared to the previous case.
86
In similar way, nucleus is like a magnet and electrons are like a pin.
87
And therefore, electrons which are near to the nucleus will be tightly bounded and the electrons which are away from the nucleus,
88
that is electrons in outermost orbit will be loosely bounded.
89
And these loosely bounded electrons can be easily removed.
90
We call such loosely bounded electrons as free electrons.
91
if even if now you may think atom how many free free electrons are there
92
but even if each atom gives one loosely bounded electrons we can get billions
93
or maybe more of such free electrons from a Madal.
94
good conductors of electricity.
95
Material which has large number of free electrons are good conductors of electricity.
96
Now if we make wire of such material and apply voltage across it, free electrons will start flowing from that material.
97
And these are some good conductors of electricity.
98
The best conductors of electricity are silver, copper, gold, aluminium in that order.
99
It is important to know that not all the conductors of electricity provide same kind of conductivity.
100
For example brass is also a conductor and silver is also a conductor.
101
but the conductivity provided by silver is much greater than the conductivity provided by the brass.
102
Since copper and aluminum is cheap and serve the purpose very well, it is used widely.
103
In some cases silver plating is also done on a conductor to improve the conductivity.
104
Now let's see the bad conductors of electricity or which is also called as insulators.
105
Material which has very few or no free electrons are called as bad conductors of electricity or insulators.
106
Even if you make wire of such material, no electricity will flow through it because it doesn't have any free electrons.
107
Examples of insulators are like plastic,
108
porcelain, glass, air etc. And But this insulator plays a very important role in many applications in electrical industry.
109
For example, you can take cables which are present in our house.
110
You can see that all the cables are insulated with plastic to avoid any direct contact with live conductor.
111
And this insulator comes very handy saving so many lives every day.
112
Now let's see about the semiconductors.
113
There are few materials which has properties of both i .e conductor and insulator.
114
At room temperature the material has very few free electrons and hence acts as an insulator.
115
But if the temperature goes up to a certain limit, the material acts as a conductor.
116
One example of semiconductor is silicon which is widely used in electronics devices.
117
Yeah, so finally after learning the basics of atoms and electrons, it's time to learn about electric current.
118
As we have seen, conductor which has free electrons can travel anywhere in the conductor if not directed.
119
To understand what is electric current, let's get back to our train.
120
This is our train and we want this train to go to the destination D.
121
Well, if I start the train, train can go anywhere but not to the destination.
122
But, if we place tracks from the initial position of the train to the destination D and turn on the train
123
Now train will travel in the direction we want and it will reach to our destination D.
124
Concept of electric current is not much different from this example.
125
Tren represent the material filled with electrons.
126
tracks is equivalent to the conductors and the batteries inside the trains is equivalent to the voltage source.
127
The conductor has free electrons present in it.
128
If these free electrons are not directed, it can move randomly in the conductor.
129
But if we give them a direction and a path to flow, they flow in a coordinated fashion like our train travelled after placing the tracks.
130
This directed flow of electron is what we call electric current.
131
We can exactly relate this to our train example.
132
The example makes the understanding of electric current much easier, isn't it?
133
This uniform flow of electrons is what we call as electricity or electric current.
134
Yes, it is as simple as that.
135
You can consider a copper strip as shown in this figure.
136
If we apply voltage to it, negatively charged free electron starts flowing towards the positive terminal.
137
This directed flow of electron is what we call electric current.
138
From this figure you can see
139
that the direction of current is from negative terminal to positive terminal and which is correct as well.
140
And this direction of current is called as actual direction of current.
141
However, it was assumed that the current flowed from positive terminal to the negative terminal via conductors
142
and this assumption is so firmly established that it is still in use.
143
And this direction is what we call conventional direction of conductors current Of course,
144
now we need a unit to measure the current flowing from a circuit or a closed network.
145
Now, someone may say very large current is flowing through the circuit or very small current is flowing through the circuit but,
146
How do we know if the flowing current is large or small?
147
It is simple too.
148
More electrons flows per second we can say current is large
149
and when very few electron flows per second we can say current is small.
150
The strength of electric current is electrons flowing per second, that is charge flowing per second.
151
The unit of charge is coulomb which is represented by letter c.
152
1 coulomb indicates charge on 625 multiplied by 10 to the power 16 electrons.
153
My god that's huge isn't it.
154
So 1 coulomb is equal to charge on 625 multiplied by 10 to the power 16 electrons.
155
So the current
156
The charge queue is measured in coulombs
157
and the time is measured in seconds and hence the unit of current will be coulombs per second or ampere.
158
If charge is equal to 1 coulomb
159
and time is equal to 1 second then we can say that 1 ampere of current is flowing.
160
If someone says current of 5A is flowing then it is basically 5 coulombs of charge flowing per second through the wire.
161
And 5 coulombs indicates charge on 5 multiplied by 625 multiplied by 10 to the power 16 electrons.
162
So if you want to increase the current flowing through a wire, you have to increase charge flowing per second.
163
So, the unit of current is ampere or coulmbs per second.
164
Ampere is most commonly used.
165
Now let's see about the types of electric current.
166
We can divide electric current in two main types.
167
First is steady state current or direct current.
168
When the magnitude
169
or the amount of current does not changes with time as shown in the figure we call it steady state
170
or direct current or in short DC.
171
As you can see from figure current remains the same as the time changes.
172
Current provided by batteries is direct current and it remains almost constant.
173
The second type is alternating current.
174
When current changes its magnitude and direction with time, then it is called as alternating current or AC in short.
175
As you can see in this image, magnitude and direction of the current is changing with time.
176
The current is flowing in alternate direction, half time it is in positive side and for the half time it is in negative side.
177
And hence we call it alternating current.
178
The current generated by generators in power station is alternating current or AC.
179
So that was it for this video, in next video we will learn how we can make electrons to flow, we will learn about voltage.
180
If you like the video do share it with your friends
181
and do subscribe to my channel to get more such easy to understand videos.
182
That's all for this video guys, I'll see you in my next one but till then,
183
Keep watching, keep learning.

Download App

Everything you need to speak fluently

AI PronunciationScore every sentence
IPA PracticeMaster every sound
VocabularyBuild your word bank
Vocab GameLearn while playing
FOR YOU

Recommend Video

Vocabulary and speaking notes for this lesson

This video has 183 sentences and 2520 words to shadow. The speech runs for 18:07. The speaker talks at a steady 139 words per minute, a comfortable pace for shadowing. Only 80% of the words are among the 3,000 most common in English, so the vocabulary is demanding.

Key vocabulary in this video

15 words from the video worth learning, with pronunciation and meaning:

WordPronunciationMeaning
electrons nounThe digital or electronic version of a document.
atom noun/ˈætəm/The smallest possible amount of matter which still retains its identity as a chemical element, now known to consist of a nucleus surrounded by electrons.
conductor noun/kənˈdʌktɚ/One who conducts or leads; a guide; a director.
electron noun/ɪˈlɛk.tɹɑn/The subatomic particle having a negative charge and orbiting the nucleus; the flow of electrons in a conductor constitutes electricity.
orbit noun/ˈɔɹ.bɪt/An elliptical movement of an object about a celestial object or Lagrange point, especially a periodic elliptical revolution.
bound adjective/ˈbaʊ̯nd/Obliged (to).
electricity noun/ɪˌlɛkˈtɹɪsɪti/Originally, a property of amber and certain other nonconducting substances to attract lightweight material when rubbed, or the cause of this property; now…
outer adjective/ˈaʊtɚ/Outside; external.
unstable adjective/ʌnˈsteɪ.bəl/Not stable.
magnet noun/ˈmæɡ.nɪt/A piece of material that attracts some metals by magnetism.
nucleus noun/ˈnuː.kli.əs/The core, central part of something, around which other elements are assembled.
stable noun/ˈsteɪ.bəl/A building, wing or dependency set apart and adapted for lodging and feeding (and training) ungulates, especially horses.
terminal noun/ˈtɚmɪnəl/A building in an airport where passengers transfer from ground transportation to the facilities that allow them to board airplanes.
pole noun/pəʊl/Either of the two points on the earth's surface around which it rotates; also, similar points on any other rotating object.
attract verb/əˈtɹækt/To pull toward without touching.

Phrasal verbs you will hear

WordMeaning
get back to verbReturn to (an activity)
push out verbTo force (someone) to leave a group.
turn off verbTo power down, to switch off, to put out of operation, to deactivate (an appliance, light, mechanism, functionality etc.).

Pronunciation to watch

The speaker uses 5 contractions and reduced forms, such as isn't, doesn't, don't. Say them the short way, as you hear them.

  • The “sh” and “zh” sounds: destination /dɛstɪˈneɪʃən/, shell /ʃɛl/, establish /ɪˈstæb.lɪʃ/, conclusion /kənˈkluːʒən/, conventional /kənˈvɛnʃənl̩/
  • Long words — get the stress right: electricity /ɪˌlɛkˈtɹɪsɪti/, semiconductor /ˌsɛmikənˈdʌktə/, electrical /ɪˈlɛktɹɪkəl/, destination /dɛstɪˈneɪʃən/, positively /ˈpɑ.zɪ.tɪv.li/

How to practise with this video

  1. Listen to the whole video once without speaking and note the words you do not know.
  2. Shadow it sentence by sentence at normal speed, repeating each one until your rhythm matches the speaker.
  3. Record yourself and compare with the original, paying attention to words like electrons, atom, conductor.

Grammar in this video

The structures the speaker uses most, with the exact words from the video:

StructureIn the video
Passive voice be + past participle — the focus is on what happens, not who does itis made · is known · are negatively charged
Relative clauses who / which + clause — extra information about a person or thingelectrons which are · zero which means · orbits which are

What is the Shadowing Technique?

Shadowing is a science-backed language learning technique originally developed for professional interpreter training and popularized by polyglot Dr. Alexander Arguelles. The method is simple but powerful: you listen to native English audio and immediately repeat it out loud — like a shadow following the speaker with just a 1–2 second delay. Unlike passive listening or grammar drills, shadowing forces your brain and mouth muscles to simultaneously process and reproduce real speech patterns. Research shows it significantly improves pronunciation accuracy, intonation, rhythm, connected speech, listening comprehension, and speaking fluency — making it one of the most effective methods for IELTS Speaking preparation and real-world English communication.

Shadowing technique: read the full step-by-step guide →