Luyện nói tiếng Anh bằng Shadowing qua video: How to Make Less Annoying Gameplay in Geometry Dash

Fun fact, I don't actually play that much Geometry Dash.

⏸ Tạm dừng

Tốc độ:

162 câu

Nếu các câu quá ngắn hoặc quá dài, hãy bấm Edit để chỉnh sửa.

Fun fact, I don't actually play that much Geometry Dash.

Aside from messing around in the editor and coding some projects related to the game,

I don't find myself trying out many custom levels.

But lately I've been getting bored,

so I decided to scroll through the featured list to see what kind of stuff the community is making.

Besides, I really need to stock up on orbs for 2.2.

And that's when I noticed that,

while the levels usually have really nice looking visuals,

the gameplay can be pretty annoying at times.

Obviously every level is going to play differently,

but there's a handful of recurring issues I see in pretty much every level I try.

One of the most notable rules for good game design is that every mistake should feel like it's your own fault.

If it takes a hundred attempts to beat a level because the gameplay was super buggy,

chances are people are only going to have negative things to say about it.

This video is going to focus less on bad gameplay like poor sinker UFO spam,

and more on things that are genuinely unfair to the player.

In my opinion, gameplay should always be prioritized over decoration,

and creators should strive to make their level as fair and sight readable as possible.

So without further ado, here are 10 extremely simple ways to make your level less annoying.

In case you haven't spent much time in the editor,

S blocks are invisible objects that cut off the effect of a dash orb when you touch them.

They're generally used as a way to stop the player from cheesing levels,

or just holding down for longer than they're supposed to.

However, the main problem with these blocks is that they're completely invisible.

If you're going to use S-blocks in your level,

be sure to give a clear indication of where exactly they're placed.

While a basic decoration or arrow is usually enough to get the point across,

I recommend following what Fingerdash did and place a small gravity portal.

Alternatively, you can go with the much better method of not using S-blocks at all.

If you put spikes or saw blades on the path of a dash orb,

it'll be much easier for the player to tell when they should let go.

It also gives players a little more control by eliminating the surprise of having your dash suddenly get cut off.

My rule of thumb is to leave the player in charge of releasing the dash

and only use S blocks as a fail safe in case

they managed to pass the point where they should have let go.

If you play easier levels frequently,

you've probably noticed that a lot of creators really like placing invisible blocks

that correct the player's mistakes and put them back on the right path.

While this is a nice way to reduce the stress of an easy level,

the big problem is that the objects are, well, invisible.

And that means that the blocks are most likely going to interfere with where the player was expecting to go.

This really bothers me because the creator is essentially hiding major parts of the level

and blurring the line between visible gameplay versus what's actually there there.

If you truly want to make easy and readable gameplay,

just make all of those invisible corrections viewable and merge it with the existing gameplay.

In short, what the player sees up ahead should be the same as what's actually there.

You'd think that with over 20,000 rated levels on the Geometry Dash servers,

people would know how to make good transitions by now.

Unfortunately, a lot of them still suck.

And I understand why.

When playtesting your own level,

you always know exactly what's coming up and what to do next.

The important thing to remember is that everyone else doesn't.

So even if you spend 4 hours making the world's coolest transition,

it's just going to make players angry if it gives them no time to react to the next part of the level.

I'm not saying that transitions should be removed altogether,

in fact a lot of them are really creative.

All you have to do is give the player a good second

or two to process what's up ahead before continuing along with the level's gameplay.

This also applies just as much to blind jumps,

or really any point in the level where you can't see the gameplay appearing from the side of the screen.

Let's imagine you had to sit through a 5 minute level with absolutely no objects.

Chances are you'd get bored and start making your icon jump around.

Which is fair enough, because what else are you supposed to do?

Anyways, now let's take that blank level and replace it with a quick message or logo or cutscene or whatever.

I still don't understand why,

but whenever people put pauses or cutscenes in their level,

you almost always die if you try jumping.

Either they're moving the icon to a very specific point behind the scenes,

or they just really don't want you to jump there.

Either way, try not to do this.

When playtesting your level, make sure to test what happens when you try clicking during these pauses,

and do everything you can to stop the player from dying.

Oh my god, where do I even begin with this one?

The fact that people still get away with doing this is very concerning.

If a decoration resembles a spike or triangle in any way,

it probably isn't a good idea to mix it in with the gameplay,

because if it looks too much like it's in the foreground,

people can and will confuse it for a real spike.

In fact, more often than not,

it's hard to even see a difference.

The least you could do is raise them off the ground,

or add outlines to the real spikes so players can tell them apart,

but well you know how it is.

I have nothing against marking jumps with arrows,

in fact I think it's great,

but the chevron arrow kind of exists for a reason, so please?

This one only really applies to the UFO and ship,

but please don't put jump pads inside of portals.

Like, ever.

First of all you can barely see them,

and second of all, just why?

Every time I play a level that does this I end up flying right into the ceiling,

and and by the time I get back there I forgot that the pad even existed,

so I'd die again.

Either way, make it so there's no punishment for flying too high,

or just don't put jump pads in portals,

it's really not that hard.

I recommend just placing a flat platform,

100

which you can rest on for a second.

101

More often than not, people are going to stack multiple portals on top of each other.

102

For example, a transition into upside-down ship needs both a gravity portal and a ship portal.

103

The problem is, both of these portals need to be readable by the player.

104

If the ship portal is in front,

105

the gravity portal probably won't be noticed,

106

and if the gravity portal is in front,

107

it'll be hard to tell what game mode you're switching to.

108

The easiest solution to this dilemma is to just space the portals out a little bit.

109

Chances are you don't have to switch size or gravity on the exact same frame that you touch the portal,

110

so don't be afraid to move it forwards or backwards a little.

111

Also, if you're using custom art for your portals,

112

make sure it's still easy to tell what everything is.

113

You don't want people confusing a gravity portal with the wave,

114

or something like that.

115

It's not a coincidence that modern 2 or 3 star levels play super differently compared to older ones.

116

This is because in order to get a star rating that low,

117

you basically have to treat the player like a 2 year old.

118

Pretty much every jump in the level is done for you,

119

and any flying parts require 2 or 3 clicks at most.

120

I don't have too much to say about this one other than,

121

please stop babying the player.

122

If the level truly was easy,

123

then players would already know where to go,

124

so you wouldn't have to carry them through the entire thing.

125

Chances are, you already know what I'm going to say for this one, so yeah.

126

Make sure your moving objects are predictable.

127

Well obviously it's nice to have surprises and such,

128

but the number one rule is to make sure any moving

129

objects don't interfere with what the player thinks is coming up ahead.

130

And if it does, put some sort of visual indicator so it's easy to tell where you're supposed to go.

131

For objects with multiple movements,

132

you can communicate the movement by putting the object on a makeshift track,

133

or by finding some creative way to telegraph where it'll move next.

134

If you've played Mario Maker,

135

you're probably familiar with the idea of a little tinny level.

136

Essentially it's just a level that looks like it was designed by a four year old.

137

Unfortunately, they exist in Geometry Dash as well, usually with demon layouts.

138

It goes without saying that making hard levels is much,

139

much, much easier than making easy ones,

140

but if done poorly, they're just going to come off as annoying.

141

Demon levels should be about technical

142

and fast-paced gameplay rather than just a big gauntlet of a million challenges that you squish together.

143

Gimmicks like straight fly and tight robot jumps are definitely hard enough for demon difficulty,

144

but they're not really fun to players,

145

it's just a method of artificially raising the difficulty a little.

146

Demon level should still be fair and readable,

147

the only difference being that the gameplay is much more technical and has less room for error.

148

If your idea of a demon level is just spamming straight fly and crazy UFO parts,

149

well, really you're just being a jerk to the player at that point.

150

And that about does it for this list.

151

This video is pretty different from my usual content,

152

but I feel like it had a lot of really good ideas worth sharing.

153

There's a million other points I could have gone over,

154

but my advice is to just let a friend play test your level and take note of wherever they die.

155

If you have any thoughts or things to add,

156

be sure to share them in the comments,

157

and I'll try to read as many as I can.

158

I'm really interested in hearing what you guys thought of this list,

159

whether you're a creator, or just someone who enjoys playing levels.

160

With that being said, thank you for coming to my TED Talk,

161

and I'll see you in 2022 when I upload my next video.

162

Later, nerds!

TRENDING

Phổ biến

Phương Pháp Shadowing Là Gì?

Shadowing là kỹ thuật học ngôn ngữ có cơ sở khoa học, ban đầu được phát triển cho chương trình đào tạo phiên dịch viên chuyên nghiệp và được phổ biến rộng rãi bởi nhà đa ngôn ngữ học Dr. Alexander Arguelles. Nguyên lý cốt lõi đơn giản nhưng cực kỳ hiệu quả: bạn nghe tiếng Anh của người bản xứ và lặp lại to ngay lập tức — như một "cái bóng" (shadow) đuổi theo người nói với độ trễ chỉ 1–2 giây. Khác với luyện ngữ pháp hay học từ vựng bị động, Shadowing buộc não bộ và cơ miệng phải đồng thời xử lý và tái tạo ngôn ngữ thực tế. Các nghiên cứu khoa học xác nhận phương pháp này cải thiện đáng kể phát âm, ngữ điệu, nhịp điệu, nối âm, kỹ năng nghe và độ lưu loát khi nói — đặc biệt hiệu quả cho người luyện IELTS Speaking và muốn giao tiếp tiếng Anh tự nhiên như người bản ngữ.

ShadowingEnglish.com – Luyện Nói Tiếng Anh Bằng Shadowing

Nói tiếng Anh lưu loát với phương pháp Shadowing — nghe người bản xứ, đọc theo từng câu, rèn phản xạ ngôn ngữ thật sự. Được hàng ngàn người học IELTS tin dùng.

Luyện nói tiếng Anh bằng Shadowing qua video: How to Make Less Annoying Gameplay in Geometry Dash

Phổ biến

Về Bài Học Này

Từ Vựng & Cụm Từ Chính

Mẹo Luyện Tập

Phương Pháp Shadowing Là Gì?

Luyện nói tiếng Anh bằng Shadowing qua video: How to Make Less Annoying Gameplay in Geometry Dash

Tải Ứng Dụng

Về Bài Học Này

Từ Vựng & Cụm Từ Chính

Mẹo Luyện Tập

Phương Pháp Shadowing Là Gì?