跟讀練習: SpaceX Is HIDING Something! | Starship Update - 通過影片學習英語口語
選擇練習模式
每種模式都會開啟全屏練習室。
169 句
如果句子過短或過長，請點選 Edit 進行調整。
1
It's the calm before the storm at Starbase as SpaceX slowly but surely prepares for Starship Flight 13, including a stupendous amount of deluge testing at Pad 2.
2
Refurbishment is in full swing at Pad 1, we're proofing the launch mounted LC-39A, Slick 37's tower is stacking, and if that wasn't enough,
3
we've seen some changes to the mystery structure at McGregor.
4
What's going on inside?
5
All of that and much more is coming up in this Starship Update.
6
We're going to start this week at the Giga Bay, the huge building where SpaceX plans to assemble and refurbish its version 3 Starships and Super Heavy boosters.
7
We can see
8
that SpaceX has finally reached the stage where the transfer aisle bridge crane will be installed
9
and where the roof trusses will go.
10
But what does a bridge crane actually do, you might task.
11
As the Gigabay is divided into workstations to produce and stack both boosters and ships, you need to be able to move the vehicles from their workstations or turntables across to the transfer aisle.
12
This is where the bridge crane comes into play.
13
Just like we see inside both of the Megabays, it is a large crane mounted on the roof of the building.
14
It can travel across to a turntable, lift a vehicle up to attach another barrel section,
15
or move a fully stacked vehicle over to a workstation or a transport stand for testing or flight.
16
A fully stacked super heavy booster with Raptor engines will probably be the heaviest thing
17
that a bridge crane will have to lift inside the Gigabay.
18
When a booster's methane tank is being stacked onto its liquid oxygen tank, we see that the bridge cranes inside Mega Bay 1 have to hand the methane tank over to each other,
19
as one bridge crane cannot cover both the turntable and the workstation where the liquid oxygen tank is waiting.
20
This is why SpaceX rolls out the liquid oxygen landing tank
21
installation jig to put the methane tank on for a bridge crane swap.
22
We expect that this issue will be resolved inside the Giga Bay, which should make the stacking process run a bit more smoothly.
23
SpaceX is prefabricating the roof trusses on the ground before lifting them up with the tower cranes.
24
Prefabricating them on the ground allows for better access during construction and improves the whole process as well.
25
When the roof trusses are installed, SpaceX can then put the roof itself onto the trusses, which will complete the production part of the Giga Bay,
26
leaving only the penthouse, the doors and all the panels to finish the outside of the building.
27
Moving to Sanchez, there's more construction, specifically with the new orbital launch mount for pad 1.
28
We saw another top deck panel being lifted this week, following the previous lift at the end of May.
29
And while it's a bit hard to see from a distance, it looks as though this top deck piece was lifted and simply moved aside, probably to allow better access for work.
30
Because the launch mount is not yet ready to receive the top deck, we will have to wait a little while before it is actually lifted onto the rest of the mount.
31
The top panel for the launch mount is where the deluge water will exit to protect the mount, including both booster quick disconnects for launches and landings.
32
With the old design at Pad 1, the only protection on the top deck was steel, which would erode over time.
33
The same applied to the booster quick disconnect as well, which increased the refurbishment time needed after each launch.
34
Now that Flight 12 is behind us, we can see that the new design held up far better compared with the old.
35
This standardised design, so to speak, is being duplicated across all of SpaceX's new Starship pads, but more on that later.
36
Stopping by Mega Bay 2, we can see Ship 41 sitting on the bay's middle work stand, this time with no visible scaffolding surrounding it and only a few thermal tiles missing around the flap aero covers.
37
And while these will protect Starship against the heat of re-entry, you can protect yourself against the sand of the beach with your own TPS beach towel at shop.nasaspaceflight.com.
38
Speaking of future ships, it looks like Ship 40's static fire campaign is not
39
that far off as a road delay is currently scheduled for the early hours of Tuesday morning.
40
Fingers crossed all six Raptors will have lit up by next week's episode.
41
Moving over to the launch site, aerial work platforms have been spotted working on the ship quick disconnect arm on Pad 1's launch tower.
42
This suggests that SpaceX is getting close to finally removing the arm.
43
Even the untrained eye can tell that it has done its time and served the Starship program well.
44
It's ready for its long-awaited retirement, to be replaced with the much-improved design we've already seen in action at neighbouring Pad 2.
45
This arm has been basking in the salty Gulf air for all 11 launches at Pad 1, with both Block 1 and Block 2 vehicles.
46
As a result, it also needed to be retrofitted many times to accommodate these changing vehicles, from adding a hot stage ring to changing the fundamental design of the ship.
47
One of those involved the removal of the SQD arm claw that used to stabilise the booster.
48
I'd bet there's some newer fans who may not even know what that is.
49
SpaceX soon realised that the full stack was stable enough on its own
50
and removed the claw from the arm many years ago.
51
The SQD umbilical has also seen a few increases in height
52
due to a taller booster with the addition of a hot staging ring.
53
With all these lessons in mind, SpaceX designed the new arm for Pad 2 to allow for a higher flight cadence.
54
The arm was almost removed the other day, the Buckner-owned Liebherr LR11000 crane received a load spreader
55
and a crew was even spotted on the arm to help with attaching the load spreader to the umbilical.
56
We expected the spreader to be attached further along the arm, but for whatever reason SpaceX aborted the removal and then detach the load spreader.
57
While Pad 1 is still undergoing reconfiguration for Block 3, Pad 2 is also receiving some attention, mainly to the chopsticks and the carriage system.
58
SpaceX has added reinforcements to the chopsticks by welding on some doubler plates.
59
Adding these reinforcements to the sticks will help with catching both the booster and the ship by strengthening those sections.
60
In fact, when Pad 1 was being prepared for a booster catch on Flight 5, we saw SpaceX carrying out similar work on the chopsticks there as well.
61
With this work now seemingly complete, the chopsticks were closed once again and some of the scaffolding around the sticks was even removed.
62
Along with the sticks, a good deal of welding and grinding was also observed around the carriage system, possibly to add further reinforcements.
63
However, the chopstick and carriage work was not the main event at Pad 2 this week.
64
That honour belongs to the deluge system, which saw a staggering 11 runs.
65
Whilst none of them involved the top deck, on Thursday the 18th, SpaceX performed three deluge tests back to back to back, which is a first.
66
And on the 19th, SpaceX carried out two deluge tests back to back.
67
When everything is connected, SpaceX will be able to use the water mains to refill the deluge tank farm, replacing the need for the hundreds of water trucks.
68
But that's not all.
69
At the bottom of the trench, there are sump pumps to empty it of the water that would otherwise remain there,
70
either because it's not been evaporated by the Raptor engine's exhaust or simply hasn't been blown out of the trench.
71
To prevent storage from becoming a limiting factor at the tank farm, two new tanks have rolled from the port of Brownsville to the launch site.
72
The removal of the older smaller tanks
73
and the relocation of the ribbed storage tanks has allowed SpaceX
74
to move the two new tanks into the freed up space
75
so we can expect more storage tanks to arrive at the port
76
and be moved into their places once the groundwork is ready.
77
With more tanks at the tank farm more tanks need filling.
78
Introducing the air separation unit.
79
This week some more pipes have been installed around the compressor stage and the rest of the ASU.
80
While the air separation unit still has a long way to go, it is slowly but surely connecting more and more of the units together.
81
Eventually, this machine or building or facility will help supplement the commodity supply at Starbase.
82
Over on the other side of the Gulf, SpaceX is carrying out some unique but not entirely new testing at Launch Complex 39A.
83
Just over a month ago, the testing jig IB Proofin was delivered to LC39A after its journey from Starbase to the Cape.
84
It is now finally installed on the orbital launch mount, but what is ibuproofin actually for?
85
The first time we saw ibuproofin was when it was being used to test pad 2 at Starbase, where it was hooked up to each clamp in the launch mount to ensure they were all aligned correctly,
86
although this is not the only thing being tested.
87
Ibuproofin is also used to verify that the hold down clamps can withstand the launch thrust from 33 Raptor 3 engines.
88
This is very important of course, we saw on Flight 12 and during all the pre-flight testing just how powerful those engines are.
89
This testing process should not take too long.
90
At Starbase, IB Proofin spent about 11 days connected to the pad back in November 2025, so we shouldn't expect this time to be much different.
91
Maybe IB Proofin should be renamed to iKeep Proof-In for obvious reasons.
92
So where are we now with the progress at 39A and what's next for the pad?
93
Judging that they're only just now using IB Proof-In, we can estimate
94
that they're around four to six months away from the pad
95
being ready for a vehicle as that's roughly how long it took for pad two at Starbase.
96
That puts us in a good position for a potential launch from 39A this year in the winter, fingers crossed.
97
But to reach that point, there is still a long list of items that SpaceX will need to complete once IB Proofin has finished Proofin.
98
Starting with the two booster quick disconnects, they are not yet fully connected or complete as the teams have not installed the QD hoods, let alone tested them.
99
Next we'll be testing the chopsticks as they have never moved up or down the tower since they were installed in 2022,
100
along with load testing to ensure they can lift the dry mass of a booster or ship.
101
In between the various tests, SpaceX crews will also be fitting the rest of the shielding on the service structure
102
and installing the hold down doors for all the clamps to protect them once they retract during launch.
103
But SpaceX isn't just working on a third Starship pad, what about the fourth?
104
The launch infrastructure at Space Launch Complex 37A is growing,
105
quite literally, as the LR13000 crane was hooked up to the second of nine modules for stacking onto the complex's first tower.
106
Eventually, Slick 37 will be home to the fourth and fifth Starship launch pads, although it is unlikely that even the first of these twin pads will be completed before 2028,
107
judging by Starbase's PA-2, which started construction in mid-2024 and finally supported a launch with Flight 12 in May 2026.
108
Now, this Space Coast segment is going to take a turn
109
as we take a very rare trip over to California's Space Coast, Vandenberg Space Force Base.
110
Recently, SpaceX has demolished historic Launch Complex 36 in preparation for converting it into a Falcon 9 and Falcon Heavy launch site.
111
However, there is a possibility that instead, SpaceX might change their mind and go through the process of turning the site into a Starship pad, or PADS.
112
After all, they've already removed one pad, 39A, from Falcon 9 operations, and it wouldn't be the first time a proposed Falcon launch site ends up supporting Starship.
113
In an alternate timeline, Starbase may be called Falcon Base.
114
Only time will tell what they decide to do, but of course, you'd already know all of this if you watched our weekly Friday news show This Week in Space Flight.
115
Back on the best coast, what is the point of having a pad
116
if you do not have a Giga Bay to build the vehicles that will launch from it?
117
The Florida Giga Bay is further ahead in construction than the one at Starbays, with a lead of roughly three months.
118
Over the past few weeks, SpaceX has been dismantling each of the four tower cranes, and finally the last one is coming down with the removal of the top section of the crane, along with the lower parts of the others.
119
This means that the main operational crane now building the Gigabay is the Manitowoc MLC-650, a mobile crawler crane sat next to the bay.
120
It is replacing the four tower cranes and will be used to complete the rest of the building, because It's difficult to build a roof if you have four cranes sticking through it.
121
We are still a long way from producing vehicles in Florida though, as there is not even a suggestion of a Star Factory yet,
122
and until there is, the Gigabay is going to be more of a glorified storage facility.
123
Until Starship production is ready at the Cape, and as we have discussed in previous weeks, MarMAC-31, you'll thank me later,
124
will be used to transport vehicles across to the Space Coast from Starbase until the Cape's facilities are ready.
125
This week, MarMAC-31 was moved from the Kennedy Space Center Turn Basin to Port Canaveral, it is now docked in the same location it occupied before it first headed to Starbase.
126
A new addition to SpaceX's Roberts Road facility will be a newly proposed car park.
127
This will be needed to support the expected increase in workforce once the Star Factory
128
and Gigabay are up and running at the site, similar to how SpaceX built the multi-story parking garage in Starbase, although this Florida plan is just normal surface parking.
129
Starship in Florida is getting closer to reality, but until then, it's time to head back to Texas for our McGregor Minute.
130
Raptor 3 saw an increase in testing compared with last week, rising from 12 engine tests to 16 as of early Saturday morning.
131
Most of these took place on the Raptor South stand rather than the Raptor vertical stand, unlike last week.
132
The 12 test firings on Raptor South included some relight testing and four longer burns of around 141 seconds.
133
Based on the length of the longer burns and the shorter relight burns of 10 to 20 seconds, it's likely these are booster engines being verified for the ascent, boost back and landing burns.
134
Naturally, the booster requires far more engines than a ship, 33 against only six, so booster engines would be tested more frequently,
135
especially right now when the production of ships and boosters is running at roughly one-to-one.
136
Of course, in the future, more ships will be built than boosters, so the engine testing ratio will change.
137
Of the Raptor sightings this week, our cameras at McGregor spotted Raptor 123, which looks a little dusty and worse for wear, along with Raptors 145 and 149, finishing off with Raptor 80.
138
There were no serial number records this time around sadly, but SN80 seems to be a test Raptor.
139
It was going to fly on Booster 19 as it was seen on the booster prior to its 33-engine static fire test, but for unknown reasons it was replaced and returned to McGregor. Since then,
140
it seems likely SpaceX has been using it to check upgrades
141
on the engine before rolling them out to the rest of the Raptor 3s.
142
This might not be a record, but SN80 did complete one of the fastest test cycles at McGregor with an arrival
143
and departure within 24 hours of each other.
144
There are some other intriguing non-Raptor related updates from McGregor as well.
145
Remember the mystery structure where SpaceX has been testing unknown items?
146
They recently installed a black tarp over the top of the structure.
147
Now, only SpaceX knows why, but we can speculate on the reasons behind it.
148
It is possible that it's to remove the shadows we were able to see moving around inside when they are testing things,
149
although the shadows themselves are not very revealing as to what is going on inside.
150
It is possible that something more obvious may be tested soon and they want to remove any hints.
151
Alternatively, it could simply be an added layer of protection that they are installing, as we have seen parts of the white tarp get damaged by the weather in the past.
152
But here's hoping it's related to the human landing system.
153
Back to where we started over in Starbase, there's another test site, Massey's.
154
There has been a decent amount of activity.
155
After Booster 20 conducted its cryo testing a couple of weeks ago and then rolled back to the production site,
156
the booster cryo stand was rolled back to Massey's for storage until the next booster in line is ready for testing.
157
Speaking of testing, Ship 39.1, the Block 3 ship aft test article, conducted its 16th cryogenic proof test.
158
It was loaded with liquid nitrogen to verify the structural integrity of the design, although it is likely testing other aspects now rather than just the structure.
159
Ship 39.1 is the only test article that has done anything meaningful recently, as the landing tank was removed from the nosecone jail in a previous episode,
160
and Booster 18.3 has not completed any testing since the beginning of the month.
161
While on the topic of B-18.3, this week its actuators were removed.
162
These applied the forces replicating what a vehicle might experience in flight, and perhaps beyond.
163
As a quick reminder, B-18.3 is the booster forward and hot stage ring test article, and it has a ship aft mock-up on top for testing the hot stage ring.
164
B18.3 has completed 20 tests over the course of its time, but it is possible that, with the actuator removal, it has wrapped up its testing career.
165
We do not know for sure, however, and there's another factor in play as well.
166
Alongside the actuator removal, the Super Crusher, the cage that B18.3 is in, has had new actuators welded around the bottom of the structure.
167
So, potentially, SpaceX wants to test different areas of the test tank by applying forces in a different location.
168
It's all part of the march towards Flight 13, which is well and truly on the way, despite the quiet nature of Starbase this week.
169
I've been Ryan Caten for NSF, thanks for watching, and goodbye.
同頻道
C12
Possible Florida Starship? - Starbase Summary
Daily ConversationWorking Adults
C11
SpaceX Is Ready to Send Starship Into Orbit | This Week in Spaceflight
Daily ConversationUniversity StudentsWorking Adults
C12
"SHIP GOES HERE" for flight 14 - Starbase Summary
Daily ConversationWorking Adults
C15
Starship Flight 14 Goes Orbital! SpaceX Reveals 10-Hour Mission | Starship Update
Daily ConversationWorking Adults
B24
The Chopsticks get Chopped - Starbase Summary
Business EnglishUniversity StudentsWorking Adults
B21
Artemis II Astronaut talks about being a Crew ✨🌎 #nasa #space #artemis
Daily ConversationUniversity StudentsWorking Adults
B25
Launch Pads and Prep at Starbase (and Beyond) - Starship Summary
Business EnglishUniversity StudentsWorking Adults
C16
Flight 14 (and Gigabay) Milestones Shaping Up - Starbase Summary
Business EnglishUniversity StudentsWorking Adults
C12
Did This Camera Survive the Static Fire? - Starbase Summary
University StudentsWorking Adults
B14
Starbase Catches up after Flight 13 | SpaceX Starbase
Daily ConversationUniversity StudentsWorking Adults
B27
Ship 40 Survived! SpaceX Prepares for an Ambitious Flight 14 | Starship Update
IELTS PrepTOEFL PrepUniversity Students
B24
"Well, it's Flight 13 Launch Week... Again" | SpaceX Starbase
Business EnglishUniversity StudentsWorking Adults
C16
"This is where I'd put my flight 13 footage..." | SpaceX Starbase
IELTS PrepTOEFL PrepUniversity Students
B26
Single Engine Static Fire? Huh. | SpaceX Starbase
IELTS PrepTOEFL PrepUniversity Students
C15
Starship Testing Takes an Unexpected Turn | Starship Update
IELTS PrepTOEFL PrepUniversity Students
C14
SpaceX Delays Flight 13 Further, Flight 14 Testing Starts! | Starship Update
Business EnglishUniversity StudentsWorking Adults
B26
SpaceX preparing two Starship flights in parallel - Starbase Summary
Daily ConversationUniversity StudentsWorking Adults
FOR YOU
推薦影片
C14
287 句
Flying the Air Force's $320M Supersonic B-1 Bomber
IELTS PrepTOEFL PrepUniversity Students
C18
65 句
Space Elevator – Science Fiction or the Future of Mankind?
IELTS PrepTOEFL PrepUniversity Students
C17
110 句
World’s Most Advanced Artificial Egg Hatches Chicks
IELTS PrepTOEFL PrepUniversity Students
C12
400 句
Video
IELTS PrepTOEFL PrepUniversity Students
B23
133 句
Artemis II Explained | 2026 Mission to the Moon
IELTS PrepTOEFL PrepUniversity Students
B22
198 句
NASA tested my chain theory in space
IELTS PrepTOEFL PrepUniversity Students
C12
90 句
How to Move the Sun: Stellar Engines
IELTS PrepTOEFL PrepUniversity Students
B21
32 句
Elon Musk: SpaceX is about taking the fiction out of science fiction
IELTS PrepTOEFL PrepUniversity Students
C12
151 句
My thoughts on the first round of UFO files
IELTS PrepTOEFL PrepUniversity Students
B22
43 句
ElevenLabs 2026 07 13T15 18 04 Hale Expressive, Deep and Emotive pvc sp100 s65 sb75 se29 b m2 1
IELTS PrepTOEFL PrepCambridge Exam Prep
為什麼要通過這個影片練習口語？
在觀看SpaceX的最新影片時，您不僅能獲得關於航天事業的有趣資訊，還能在輕鬆的環境中提升您的英語口語能力。這些影片為英語學習者提供了實際使用英語的機會，通過模仿講解者的發音和語調，幫助您形成更自然的發音和流利的口語能力。
通過這種方式，您可以增強對語言的理解，並在與他人交流時更加自信。這種練習方法被稱為“shadowing”，即“影子跟讀”，適合各種水平的學習者，尤其是希望提高英語發音和口語技能的人士。通過這樣的英語口語練習，您將在興趣和樂趣中提升語言能力。
語法與表達在上下文中的應用
在影片中，講解者使用了一些重要的語法結構和表達方式，這對學習者的語言學習非常重要。以下是幾個例子：
- 進行時態：講解者多次使用現在進行時，強調SpaceX當前正在進行的活動，如“正在準備”以及“正在進行的測試”。這種時態能幫助學習者理解如何描述正在發生的事情。
- 被動語聲：影片中也有許多被動語態的使用，例如“頂板被提升”，這對學習者理解動作的承受者及其重要性至關重要。
- 將來時表達：講解者多次提到未來計劃和預期結果，如“我們預期這個問題將在Giga Bay解決”。這種表達能夠幫助學生學習如何談論未來的計劃和預測。
常見的發音陷阱
在這個影片中，有一些可能讓英語學習者感到困惑的發音難點。例如，講解者提到的“Raptor engines”中的“Raptor”一詞，許多非英語母語者可能會發成“Rapto”，而不是正確的“Raptor”。
另外，短語“liquid oxygen”中的“liquid”也可能受到發音習慣的影響，許多人可能會在音節上出現失誤。因此，在練習時，專注於每個音節的發音將大有幫助。
通過反覆觀看和模仿，以及在影子跟讀（shadowspeak）中不斷練習，您將能有效提高英語發音技巧，掌握更地道的英語口語。
影片中的語法
說話人最常用的結構，並附上影片中的原話：
| 結構 | 影片中的用法 |
|---|---|
| 現在完成進行時 have/has been + -ing — 以前開始、現在仍在繼續的動作 | has been basking · has been dismantling · has been using |
| 現在完成時 have/has + 過去分詞 — 過去發生但與現在仍有關聯的事 | we've seen · has finally reached · have been spotted |
| 被動語態 be + 過去分詞 — 強調發生了什麼，而不是誰做的 | will be installed · is divided · being stacked |
| 定語從句 who / which + 從句 — 補充說明人或事物 | trusses, which will · back, which is |
什麼是跟讀法？
跟讀法 (Shadowing) 是一種有科學依據的語言學習技巧，最初開發用於專業口譯員的培訓，並由多語言者Alexander Arguelles博士普及。這個方法簡單而強大：您在聽英語母語原聲的同時立即大聲重複——就像是一個延遲1-2秒緊跟說話者的影子。與被動聽力或語法練習不同，跟讀法強迫您的大腦和口腔肌肉同時處理並模模擬實的講話模式。研究表明它能顯著提高發音準確性，語調，節奏，連讀，聽力理解和口語流利度——使其成為雅思口語備考和真實英語交流最有效的方法之一。