تدريب Shadowing: How to configure port security on cisco switch | Port security - تعلم التحدث بالإنجليزية عبر الفيديو

اختر وضع التدريب

كل وضع يفتح غرفة تدريب بملء الشاشة.

42 جمل
إذا كانت الجمل قصيرة أو طويلة جدًا، انقر على Edit لتعديلها.
1
Hello friends, welcome to my youtube channel, this is Prasad and today we will look at port security configuration on Cisco switches.
2
So basically port security enables
3
you to configure each switch port with a unique list of the mac addresses of the devices
4
that are authorized to access the network through that port.
5
This security enables individual ports to detect, prevent and log attempts by unauthorized devices to communicate through the switch.
6
Configuring the IP address of Class C network.
7
Enable configure terminal interface range fastethernet 0 slash 1 to 5.
8
Now we need to configure the switch port as an access
9
port using the switch port mode access command by default all ports are in dynamic mode
10
you can see here past ethernet is a dynamic port
11
so type the command switch port mode access
12
then activate port security on the switch port with the switch port port security command switch port port security
13
now switch port port security question mark
14
Here are the some options as edging MAC address maximum violation.
15
So I am choosing MAC address first?
16
First option 48 bit MAC address.
17
This indicates that you can enter the MAC address manually
18
and sticky means it is a port security feature that learns MAC addresses on an interface and retains the MAC information.
19
When you enter this command, the interface converts all the dynamic secure MAC addresses
20
including those that were dynamically learned before sticky learning was enabled to sticky secure MAC addresses.
21
Next command is switch port port security maximum.
22
Max secure addresses.
23
For security reason I want to allow only one identified device so I am selecting one.
24
Now we need to set violation command switch port, port security, violation.
25
Here are three options protect, restrict, shutdown.
26
We can either use restrict shutdown or protect port security commands.
27
So protect mode drop the packets with unknown source MAC addresses
28
until you remove enough secure MAC addresses to drop below the maximum value.
29
So we have already set the max value as 1.
30
An interface is allowed only one mac address of the source device.
31
Restrict mode performs the same function as protecting and shutdown causes the interface to enter an error disable state immediately.
32
Port will be shut down.
33
So I am choosing restrict mode, no shut and write show running config.
34
You can see here that no MAC address has been detected by any interface gate.
35
So let's wait for 30 seconds or check if your connectivity is fine.
36
Connectivity is working fine.
37
Navigate the MAC address on the interface.
38
Now I am going to create some violations so connecting this laptop to port number 0 5
39
now check the connectivity status see the connectivity is not established
40
now connect the cable again your previous device
41
we can get the reply from the device
42
so we are done with the port security configuration thanks for watching see you in the next video

تنزيل التطبيق

كل ما تحتاجه للتحدث بطلاقة

تقييم النطق بالذكاء الاصطناعيتقييم كل جملة
تدريب IPAأتقن كل صوت
المفرداتابنِ رصيدك من الكلمات
لعبة المفرداتتعلّم أثناء اللعب
FOR YOU

فيديو موصى به

المفردات وملاحظات التحدث لهذا الدرس

هذا الدرس في المحادثة مبني على الفيديو “How to configure port security on cisco switch”. أكثر الكلمات تكرارًا في الفيديو: port, mac, security, switch, address. يحتوي هذا الفيديو على 42 جملة و482 كلمة للتدرب على الترديد. مدة الكلام 5:25. يتكلم المتحدث ببطء، بمعدل 89 كلمة في الدقيقة تقريبًا، فيكون لديك وقت لتقليد كل صوت. 78% فقط من الكلمات ضمن أكثر 3,000 كلمة شيوعًا في الإنجليزية، فالمفردات صعبة نسبيًا.

أهم المفردات في هذا الفيديو

12 كلمة من الفيديو تستحق التعلّم، مع النطق والمعنى:

الكلمةالنطقالمعنى
interface اسم/ˈɪn(t)ɚˌfeɪs/تَعْشِيق, وَاجِهَة
violation اسم/ˌvaɪ.əˈleɪ.ʃən/اِنْتِهَاك
restrict فعل/ɹɪˈstɹɪkt/حَدَّ, حَدَّدَ
connect فعل/kəˈnɛkt/رَبَطَ
detect فعل/dɪˈtɛkt/كَشَفَ
gate اسم/ˈɡeɪ̯t/بَوَّابَة
select فعل/sɪˈlɛkt/اِخْتَارَ
indicate فعل/ˈɪndɪˌkeɪt/دَلَّ عَلَى, رَمَزَ إِلَى
laptop اسم/ˈlæp.tɑp/كَمْبْيُوتِر مَحْمُول, حَاسُوب مَحْمُول
convert فعل/kənˈvɝt/حَوَّلَ
packet اسم/ˈpæk.ɪt/حُزْمَة, رَبْطَة
activate فعل/ˈæktɪˌveɪt/فَعَّلَ

القواعد في هذا الفيديو

أكثر التراكيب التي يستخدمها المتحدث، مع العبارات نفسها من الفيديو:

التركيبفي الفيديو
المبني للمجهول be + اسم المفعول — التركيز على ما يحدث لا على من يفعلهare authorized · was enabled · is allowed
المضارع التام have/has + اسم المفعول — حدث ماضٍ ما زال له أثر الآنhave already set · has been detected

نطق يحتاج إلى انتباه

  • أصوات “sh” و“zh”: violation /ˌvaɪ.əˈleɪ.ʃən/, configuration /kənˌfɪɡ.əˈɹeɪ̯.ʃən/, establish /ɪˈstæb.lɪʃ/
  • الكلمات الطويلة — انتبه لموضع النبر: violation /ˌvaɪ.əˈleɪ.ʃən/, configuration /kənˌfɪɡ.əˈɹeɪ̯.ʃən/, communicate /kəˈmjuːnɪkeɪt/, manually /ˈmænj(u)əliː/

أصوات يجدها متحدثو العربية صعبة:

  • /p/ — ليس /b/: انطقه مع نفخة هواء: laptop /ˈlæp.tɑp/, packet /ˈpæk.ɪt/
  • /v/ — ليس /f/: مع اهتزاز الأوتار الصوتية: violation /ˌvaɪ.əˈleɪ.ʃən/, convert /kənˈvɝt/, activate /ˈæktɪˌveɪt/, navigate /ˈnæv.ɪ.ɡeɪt/
  • تتابع الصوامت — لا تضف حركة بينها: restrict /ɹɪˈstɹɪkt/, sticky /ˈstɪki/, connect /kəˈnɛkt/, detect /dɪˈtɛkt/, select /sɪˈlɛkt/

كيف تتدرب بهذا الفيديو

  1. استمع إلى الفيديو كاملًا مرة واحدة دون أن تتكلم، ودوّن الكلمات التي لا تعرفها.
  2. ردّد جملة جملة بالسرعة العادية، وكرّر كل جملة حتى يتطابق إيقاعك مع المتحدث.
  3. سجّل صوتك وقارنه بالأصل، مع الانتباه إلى كلمات مثل interface, violation, restrict.

ما هي تقنية التظليل الصوتي؟

التظليل الصوتي (Shadowing) تقنية تعلم لغة مدعومة علمياً، طُورت أصلاً لتدريب المترجمين الفوريين المحترفين. الطريقة بسيطة لكنها قوية: تستمع لصوت إنجليزي أصلي وتكرره فوراً بصوت عالٍ — كظل يتبع المتحدث بتأخير 1-2 ثانية. تُظهر الأبحاث تحسناً كبيراً في دقة النطق والتنغيم والإيقاع وربط الأصوات والاستماع والطلاقة.

تقنية الشادوينغ: اقرأ الدليل الكامل خطوة بخطوة →