쉐도잉 연습: Inside Scania production: Manufacturing process at the Truck Factory - 영상으로 영어 말하기 배우기

연습 모드 선택

각 모드는 전체 화면 연습실로 열립니다.

121 문장
문장이 너무 짧거나 길면 Edit를 눌러 조정하세요.
1
Scania is the world's leading manufacturer of trucks.
2
This is the first production workshop where Scania Truck Assembly begins.
3
Here, the frame, the basis of the future truck, is assembled.
4
The necessary brackets are installed, on which all subsequent components and parts of the vehicle will be attached.
5
The factory assembles frames with a load capacity of up to 48 tons, on which any bodies can be installed, including dump trucks.
6
The pride of the Scania brand is the concept of modular construction of trucks.
7
This means that chassis in any configuration are made from the same elements.
8
The quality of products produced by the Scania plant is the key value of the company.
9
Therefore, at each part of the assembly, the future car undergoes a thorough inspection.
10
I'm
11
going to
12
go to the next video.
13
In the second production workshop, wires, hydraulic hoses, cables and valves are placed on the already assembled and riveted frame.
14
They take their place outside and inside the frame structure.
15
The main parts of the brake system and suspension are also mounted.
16
The braking system in Scania trucks is two-circuit and fully pneumatic with an anti-lock system.
17
In order to increase the efficiency and safety of the braking system, at the request of the customer,
18
the chassis can be additionally equipped with a system of electronic distribution of breaking forces. so In
19
the third assembly, shop, the frame gradually takes on the features of a truck.
20
It is here that, in addition to various brackets and guides, axles and wheel hubs are installed.
21
The customer can order a truck with one or two front axles.
22
In the case when the truck is built with two front posts, two-circuit reinforcement of the steering block of the frame structure is provided.
23
Correct wheel formulas reduce the weight of the truck, simplify operation, reduce tire wear and transport costs.
24
Therefore, the Scania model range offers special wheel formulas from 4x2 to 10x6.
25
And for difficult road conditions, models with increased road clearance with all-wheel drive transmission and wheel gearboxes have been developed developed.
26
In the fourth workshop, the engine is installed on the future truck.
27
Engines are delivered to the factory assembled, with a gearbox and mounted on special vibration Insulated cushions.
28
I'm going to
29
put the
30
sauce on the top.
31
Also, at this stage of the assembly, the radiator, battery compartment, transmission rods, anti-roll bar and exhaust pipes are installed.
32
Work is also being carried out on the switching of installed nodes.
33
At the customer's request, the plant installs any engines from the wide range of Scania engines.
34
These traction engines are designed specifically for trucks, so they have high torque at low RPM.
35
and they meet modern Euro's six environmental standards.
36
After the engine is installed, the front bumper, front and rear lights, batteries and large capacity fuel tanks are attached in the 5th Assembly shop.
37
Scania's Cab Factory in Oskarsham, Sweden Scania Oscarsham produces truck cabs for the whole of Scania's European production output.
38
Every day, some 160 tons of galvanized plate arrives at the press workshop on big, heavy rollers.
39
Here, it's trimmed and pressed into close to 200 different articles.
40
A cab consists of about 310 different metal plate items.
41
The parts are welded together into sub-components, which in turn are placed together to create the body of the cab.
42
The light grey robots are highly articulated and nimble, but also smart, and can basically learn to execute just about any operation.
43
The overall impression is of a giant, futuristic ballet performance.
44
Paint Shop The body of the cab is painting.
45
In special paint chambers, all individual parts of the Scania truck are covered with several layers of paint.
46
This is done almost entirely with the help of 18 expensive robot sprayers.
47
Even the supply of various paints is automatic.
48
The required amount of paint is transported to the robots through the original pipeline system.
49
The painting process is fully automatic with the aid of 22 robots.
50
The paint is sent to the robots by an advanced paint distribution system.
51
This system sends the paint as a kind of pneumatic tube through a plastic pipe to the individual robots.
52
First workers hang the cabin and chassis parts on so-called skids, racks.
53
Then they clean the parts in a power wash installation.
54
The The The
55
The
56
After drying
57
and cooling, the workers spray the parts in two separate paint lines in one of the 500 colors desired by the customer.
58
After painting, the skids pass through an oven and a cooling zone.
59
The inspection and repair department then carries out an accurate visual inspection of the painted parts.
60
Minor deviations are rectified immediately by Scania's employees.
61
At the end of the production line, the workers manually remove the parts from the skids.
62
The painted parts are then assembled and prepared for transport.
63
The production of a truck is closely related to the logistics process.
64
All painted and assembled parts are delivered in the correct order to the final assembly plants in Zwolle, Angers and Södertälje.
65
The plant in Meppel is one of the most modern plants for the production of plastic coatings in Europe.
66
At a special stand, an employee assembles the front part of the exterior of the Scania cab.
67
This design allows the grille, front panel and plastic decorative elements of the Scania truck cab to be assembled with great precision.
68
Cab Assembly Shop
69
Next, other works on the assembly of the exterior and interior of the Scania truck cabin are being carried out.
70
In the cab assembly workshop, the workers together with two robots gluing and fastening windscreens to the cabs.
71
The Meppel plant supplies assembled cabs to Scania's three European truck assembly plants in Zwolle,
72
Netherlands, Angers, France and Södertälje, Sweden. to frame installation.
73
In this workshop, the cab is installed on the truck.
74
Cab installation is one of the most spectacular stages in assembling our trucks.
75
The equipment, which catches the cockpit and makes it appear that it is flying,
76
has received the nickname Eagle.
77
Scania offers buyers a wide selection of cabs with access to many options.
78
The Scania cab is built on a strong metal frame.
79
This design is specially designed for the safety of the driver
80
and also reduces damage to other cars in the event of an accident.
81
It's a hot pot and one of the most.
82
It would be great for you to put it in the pot.
83
I'll take a picture for 18 minutes.
84
I'll see your hair here.
85
I'm going to bake the pot.
86
I'm going to bake the pot.
87
I'm going to bake it for 30 minutes.
88
I'm sorry.
89
I'm going to go to the next one.
90
In this section, we see an almost assembled Scania truck.
91
It remains only to install decorative elements, install protective casings and covers.
92
The most difficult station is the following, placing the wheels.
93
To perform this task, workers are assisted by automatic hydraulic cranes
94
and powerful wrenches that instantly tighten the wheel nuts with the required torque.
95
Workers cannot avoid bending and twisting to perform the operation of installing truck wheels, therefore working hours at this station are limited.
96
The truck is ready.
97
All that remains is to pour all the necessary technical fluids into the truck and start the engine for the first time.
98
After the first start, all modules of the Scania truck are programmed.
99
After that, the truck is tested on a roller stand, where the initial and working pressure of the brake circuit and the tightness of the brake actuator are checked.
100
Next, the full-fledged truck undergoes technical training and service adjustment.
101
During this, wheel camber, headlights, tachograph are adjusted, and technical testing is carried out.
102
After that, the pre-sales specialist takes the finished Scania truck for a test drive.
103
On the open platform, they check the basic running qualities, gear shifting, electrical work and hydraulics.
104
After that, a complete external inspection of the truck is carried out again.
105
And again, the truck is handed over to the Quality Control Department, which authorizes the release of the vehicle.
106
Specialists of the department conduct a so-called final inspection.
107
That is, they carefully check the assembly of the released truck, carefully inspecting every node of this vehicle.
108
All wheel nuts are inspected at the time of tightening.
109
All electrical consumers of the vehicle are switched on for a test.
110
The presence of backlash in parts, fastening defects, scratches and leakage of technical fluids is revealed.
111
If non-compliance with the norms and requirements is found during this inspection, The release of the truck is not authorized and it is sent for revision.
112
Scania carries out a serious audit of its manufactured trucks to ensure
113
that they always meet the customer's demands for a high quality product.
114
Scania truck chassis is modular.
115
Therefore, at the customer's request, a dump body, a concrete mixer, a logging truck, a garbage truck, or any other use of the body can be installed on it.
116
In the Netherlands, the Scania organization has approximately 4,000 employees at its plants in Zwolle and Meppel.
117
The factory in Zwolle is the largest Scania factory in the world.
118
Scania Production Meppel is a production facility for painting plastic parts, cab and chassis.
119
Also Swedish manufacturer Scania has a factory in Angers, France.
120
Scania Production Angers is one of four Scania truck assembly sites worldwide.
121
Thank you.

앱 다운로드

유창하게 말하는 데 필요한 모든 것

AI 발음 평가문장마다 점수 확인
IPA 발음 연습모든 소리 마스터
단어 학습나만의 단어장 만들기
단어 게임놀면서 외우기
FOR YOU

추천 영상

이 레슨의 어휘와 말하기 포인트

이 C1 수준 말하기 레슨은 영상 “Inside Scania production: Manufacturing process at the Truck Factory”을(를) 바탕으로 합니다. 가장 자주 반복되는 단어는 다음과 같습니다: truck, Scania, cab, assembly, wheel. 이 영상에는 섀도잉할 문장 121개와 단어 1569개가 있습니다. 말하는 구간의 길이는 20:27입니다. 화자는 분당 약 77단어로 천천히 말해서 소리 하나하나를 따라 하기에 여유가 있습니다. 영어에서 가장 많이 쓰이는 3,000단어에 속하는 단어가 75%뿐이라 어휘가 어려운 편입니다.

이 영상의 핵심 어휘

영상에서 가장 어려운 단어 15개를 발음, 뜻과 함께 정리했습니다.

단어발음뜻
assemble 동사/əˈsɛm.bəl/모으다
chassis 명사/ˈt͡ʃæsi/섀시
bake 동사/beɪk/굽다
authorize 동사/ˈɔθəɹaɪz/허가하다
axle 명사/ˈæksəl/차축
gearbox 명사/ˈɡɪəbɒks/기어박스, 변속기
torque 명사/tɔɹk/돌림힘
decorative 형용사/ˈdɛk.ə.ɹə.tɪv/장식용
bracket 명사/ˈbɹækɪt/괄호
node 명사/noʊd/결절
brake 명사/bɹeɪk/브레이크, 제동기
roller 명사/ˈɹoʊlɚ/롤러
leakage 명사/ˈliːkɪd͡ʒ/누설, 루설
radiator 명사/ˈɹej.di(j)ˌej.tɚ/라디에이터, 라지에타
wrench 명사/ˈɹɛnt͡ʃ/비틀기, 뒤틀기

영상에 나오는 구동사

단어발음뜻
carry out 동사/ˈkæ.ɹi aʊt/실행하다, 행하다

따라 말해 볼 만한 문장

영상에 나오는 짧고 완결된 문장으로, 일상 대화에서 그대로 쓸 수 있습니다:

  • I'll see your hair here.
  • I'm going to bake the pot.
  • I'm going to go to the next one.

이 영상의 문법

화자가 가장 많이 쓰는 문형을 영상 속 실제 표현과 함께 정리했습니다.

문형영상 속 표현
수동태 be + 과거분사 — 누가 하는지보다 무슨 일이 일어나는지에 초점is assembled · are installed · can be installed
현재완료 have/has + 과거분사 — 과거의 일이 지금도 관련이 있을 때have been developed · has received

주의할 발음

화자는 I'm, I'll 같은 축약형과 약화된 형태를 9번 사용합니다. 들리는 대로 짧게 발음하세요.

  • “th” 소리: authorize /ˈɔθəɹaɪz/, thorough /ˈθʌɹoʊ/
  • “sh”와 “zh” 소리: deviation /ˌdiː.viˈeɪʃən/, cushion /ˈkʊʃən/, vibration /vaɪˈbɹeɪʃən/, backlash /ˈbækˌlæʃ/, traction /ˈtɹæk.ʃən/
  • 긴 단어 — 강세 위치에 주의: decorative /ˈdɛk.ə.ɹə.tɪv/, actuator /ˈæk.tjuː.eɪ.tə(ɹ)/, deviation /ˌdiː.viˈeɪʃən/, futuristic /ˌfjut͡ʃəˈɹɪstɪk/, radiator /ˈɹej.di(j)ˌej.tɚ/

한국어 화자가 어려워하는 소리:

  • /f/ — ㅍ(/p/)으로 바꾸지 말고 윗니를 아랫입술에 대기: fasten /ˈfæsn̩/, fledged /flɛd͡ʒd/, futuristic /ˌfjut͡ʃəˈɹɪstɪk/, rectify /ˈɹɛktəˌfaɪ/, reinforcement /ˌɹiːɪnˈfɔːsmənt/
  • /v/ — ㅂ(/b/)과 구별하기: decorative /ˈdɛk.ə.ɹə.tɪv/, deviation /ˌdiː.viˈeɪʃən/, galvanize /ˈɡælvənaɪ̯z/, vibration /vaɪˈbɹeɪʃən/, revision /ɹəˈvɪʒ.ən/
  • /z/ — ㅈ이 아니라 성대를 울리는 /s/: authorize /ˈɔθəɹaɪz/, galvanize /ˈɡælvənaɪ̯z/, hose /hoʊz/, exhaust /ɪɡˈzɔst/

이 영상으로 연습하는 방법

  1. 먼저 말하지 않고 영상을 끝까지 듣고 모르는 단어를 적어 둡니다.
  2. 보통 속도로 한 문장씩 섀도잉하고, 화자의 리듬과 맞을 때까지 반복합니다.
  3. 자신의 목소리를 녹음해 원본과 비교하고, assemble, chassis, bake 같은 단어에 특히 주의합니다.

쉐도잉이란? 영어 실력을 빠르게 키우는 과학적 방법

쉐도잉(Shadowing)은 원래 전문 통역사 훈련을 위해 개발된 언어 학습 기법으로, 다언어 학자인 Dr. Alexander Arguelles에 의해 대중화된 방법입니다. 핵심 원리는 간단하지만 매우 강력합니다: 원어민의 영어를 들으면서 1~2초의 짧은 지연으로 즉시 소리 내어 따라 말하는 것——마치 '그림자(shadow)'처럼 화자를 따라가는 것입니다. 문법 공부나 수동적인 청취와 달리, 쉐도잉은 뇌와 입 근육이 동시에 실시간으로 영어를 처리하고 재현하도록 훈련합니다. 연구에 따르면 이 방법은 발음 정확도, 억양, 리듬, 연음, 청취력, 말하기 유창성을 크게 향상시킵니다. IELTS 스피킹 준비와 자연스러운 영어 소통을 원하는 분들에게 특히 효과적입니다.

섀도잉 방법: 단계별 전체 가이드 읽기 →