쉐도잉 연습: Starship Testing Takes an Unexpected Turn | Starship Update - 영상으로 영어 말하기 배우기

연습 모드 선택

각 모드는 전체 화면 연습실로 열립니다.

185 문장

문장이 너무 짧거나 길면 Edit를 눌러 조정하세요.

It's been a game of musical starships at Starbase, as Ship 40 and Ship 41 have been treating the Massey's test site like a hot potato.

What's up with that?

We've also got a bunch of hardware to discuss at SpaceX's Roberts Road, Launch Complex 39A, and even Space Launch Complex 37.

And if you're thirsty for more, Power 2 performed more deluge testing, including catch simulations as SpaceX prepares to bring the booster back to the launch site.

From Florida's Space Coast to South

We're starting this week's episode over at the production site,

where Booster 21 has now been fully stacked inside Mega Bay 1 and is being prepared for its cryogenic testing campaign.

However, the turntable inside Mega Bay 1 did not remain empty for long, as stacking has already begun on Booster 22.

With Booster 22's liquid oxygen tank already standing four sections tall, the vehicle is progressing through stacking much faster than Booster 19.

process.

But Booster 22 was not the only vehicle being stacked.

Over in Mega Bay 2, Ship 42's nose cone was rolled in, ready for stacking.

Ship 42 currently consists of its nose cone, PES dispenser, payload bay section and forward dome.

Just as we're seeing with the boosters, SpaceX is wasting no time with ship production either.

Just like how you shouldn't waste any time with pressing that subscribe button.

Vehicles aren't the only things growing at the production site.

Construction of the final level of the Gigabay is continuing, while be the last level they are required to build.

Just as we have seen over at Roberts Road, a crawler crane will be used to both dismantle the tower cranes and to complete the roof.

After all, the tower cranes cannot exactly finish the roof while they are still sticking through it.

Two turntable pieces, likely destined for the Gigabay, have also arrived from Huddleston, SpaceX's storage facility just down the road.

Just like the Megabays, the Gigabay will use turntables to weld barrel sections together during vehicle stacking.

Looking inside the last week has received six smaller flanges beneath the large flange.

These smaller flanges could allow additional actuators to push or pull on hardware inside the nose cone.

However, that's only speculation so we will have to keep watching for further developments surrounding this nose cone.

Over at Massey's, SpaceX was playing a game of musical chairs with its ships this week, as Ship 40 and Ship 41 swapped places more than once.

Ship 41 rolled out to Massey's last week after Ship 40 unexpectedly returned to the production site, having completed only a single engine static fire test.

But if that was not strange enough, Ship 41 only carried out two cryogenic tests on the same

night before SpaceX decided it had spent enough time at the truss structure for the moment.

It was then rolled back to the production site so

that Ship 40 could return to Massey's and complete its static fire testing campaign.

One possible explanation is that SpaceX identified an issue

that prevented a six engine static fire but did not stop them from carrying on the static fire stand,

they took advantage of the opportunity and completed that single -engine static fire last week.

During Ship 40's return to the production site, SpaceX appears to have resolved whatever was preventing the six -engine static fire

while Ship 41 began the first stage of its cryogenic testing campaign.

Once the two ships had swapped over again, Ship 40 was loaded with cryogenic propellants and even carried out both forward

and aft flap tests that finally cleared the way for the long -awaited 60 -second six -engine static fire. With

that milestone complete, Ship 40 was rolled back to the production site for its final pre -flight preparations ahead of Flight 13.

With this data in hand, when do you think Flight 13 will take place?

Let us know in the comments.

With Ship 40 back at the production site, it was then Ship 41's turn to return to Massey's and complete the rest of its cryogenic testing campaign.

One thing is for certain, the rollout team's got plenty of experience this week.

its static fire testing campaign it can put its feet up in Mega Bay 2

and make the most of the final days of the summer

sail at shop .nasaspaceflight .com where you can save 10 to 20 % on the summer collection.

It's perfect for

when it eventually splashes down in the Indian Ocean to join the super heavy swim club or

if it needs to patch up its heat shield with the

Starship heat shield grill apron after getting thoroughly cooked by the plasma of re -entry.

For Ship 41 however the completed no visible testing whatsoever,

but it could have done ambient testing.

After all, an ambient test can uncover issues with a vehicle.

Just ask Booster 18.

As Ship 41 is now sitting inside Mega Bay 2 on the engine installation stand, the next time it rolls out, it should be for a static fire test.

Last week we saw that the Super Crusher had its cap removed, indicating that this configuration has now completed testing.

This week we also saw the ship skirt section removed as

installed on top of it

and was used to simulate how a ship would press against the integrated hot stage ring during all phases of flight.

The future of B18 .3 is somewhat uncertain, but it is possible that SpaceX will go on to test the grid fin motors.

At present, only the sockets where the grid fins are mounted have undergone structural testing, not the motors that actually rotate the grid fins themselves.

Understanding how these motors perform will help SpaceX determine how quickly the booster can make attitude adjustments during re -entry, improving its ability to steer through the airflow.

As some of you may have noticed, we carried out a flyover of Cape Canaveral this past week, which gave us an updated view of components currently under construction.

This includes Roberts Road, Launch Complex 39A, and Space Launch Complex 37, all of which are at various stages of development.

First off, the Giga Bay at Roberts Road began construction around March 2025, when the foundation work started with continuous flight auger piles.

Since then, crews have made significant progress.

As of July 2026, the structural steel is complete, with cladding and roofing now nearing completion.

Both smaller doors on the north side of the building have been installed, with work now progressing on the two large doors on the south side, through which completed vehicles will eventually roll out.

The penthouse section of the Giga Bay, which is the final floor below the roof, does not appear to cover the entire footprint.

There will be areas where workers can look down into the aisles below and observe vehicles being worked on.

At present, it is not yet known what SpaceX will install on this level.

It is possible it could house an updated launch control facility for Cape Canaveral, given the eastern side provides a clear view of the launch pads.

beginning to take shape next to Hangar X2.

These appear to follow a different design from those currently used in Mega Bay 1 and Mega Bay 2 at Starbase.

It will become clearer how they function once similar units are built at Starbase, but the potential booster work stand currently appears to have six arms rather than ten, as seen in Mega Bay 1.

Another interesting piece of hardware spotted in this area is a possible jig being assembled under a tent,

which may be used to assist in transitioning boosters between horizontal and vertical orientations.

Launchpad work is also Roberts Road, with construction of the Slick 37A launch mount now underway and all eight first -level sections in place.

This design, which has already been completed twice, has so far taken crews around six months to reach this stage before being rolled out to the pad.

At least three of the four top -deck dilute sections have also been spotted.

Nearby, two manifolds required to supply water to the top deck are also visible.

Other equipment seen around Roberts Road includes valve skids and

intended for either the liquid oxygen system at 39A or for Slick 37 once construction reaches that stage.

Finally, a pair of new buildings is under construction at Roberts Road.

One is Hangar X3, while the other remains unnamed.

It is not yet clear what these will be used for, whether warehouses or fabrication facilities.

Moving on to LC39A, which resumed work in February 2025, progress on the launch pad is now on the home straight,

with it likely only a few months away been significantly faster nor slower than Pad 2 at Starbase.

While crews already had a tower and chopsticks at LC -39A, both were effectively empty shells, whereas at Starbase Pad 2,

crews already had the required propellant storage tanks in place.

A major indication that the Pad is nearing operational status is that ridge cap and bucket deluge testing has now begun.

So far, only a few tests have been observed, but this is a positive sign as SpaceX still needs to refine the new

SpaceX has added additional gas generators to each water deluge subsystem.

This means the deflector buckets now have five generators, the ridge cap has three, and the top deck has four.

For reference, Pad 2 currently has four for the buckets, two for the ridge cap, and three for the top deck.

This is an upgrade that Pad 2 at Starbase will likely receive later on once there is sufficient downtime, while Pad 1 is likely to receive the upgrade more immediately.

Another Beyond the flame trench exits, there are dips in the concrete with drainage at the base,

designed to help recapture as much unused deluge water as possible.

SpaceX does not have the room to install a system like this at Starbase, but it could potentially be installed at both planned Svig 37 pads.

Another major test was also completed recently.

100

The IB -proofing structural test and alignment tool was used on the launch mount.

101

This piece of equipment was built at Starbase to help load test and align all 20 hold -down arms and clamps.

102

at Cape Canaveral for use on Slic 37A or return to Starbase for pad one, although both uses are still at least 12 months away.

103

Moving on, the service structure now appears to have most, if not all, of its cadding installed.

104

This does not necessarily mean the interior is complete, as there may still be significant finishing work ongoing inside.

105

The final remaining items to be installed include the methane booster quick disconnect door, the rear hoods for both BQDs,

106

milestone is that the chopsticks are finally reaved, meaning they can now move up and down the tower.

107

The chopstick carriage was installed on the LC -39A tower in January 2023, three months before Starship Flight 1 launched,

108

meaning it has largely been sitting idle on the tower for several years.

109

It does raise questions about how rusted the bearing skates may have become after such a long period in the Florida weather.

110

Looking more closely at one of the chopsticks, we can see that has these installed as well.

111

The tower itself, which has been stacked since September 2022, has recently begun receiving cladding, marking another major milestone in construction progress.

112

The drawworks housing at the rear of the tower base has also been modified to include a sloped protective roof, similar to what is seen on the Starbase Pad 2 tower base.

113

One of the final pieces of the tower will be the installation of the new cladded roof,

114

which still requires final Federal this roof is planned to include a 10 -foot lightning tower on top,

115

which is far more necessary in Florida than South Texas.

116

Another area of interest is the blast wall constructed to protect the tank farm from extremely powerful launches.

117

It is worth noting that more of this blast wall still needs to be built, so it extends all the way to the far end of the methane side of the tank farm.

118

Speaking of the tank farm, two additional liquid oxygen storage tanks were installed a few months ago, bringing the total to six.

119

There are still empty positions for further storage tanks on both the liquid oxygen and liquid methane sides of the tank farm, as well as additional liquid nitrogen storage tanks on both sides.

120

likely already has sufficient capacity for a full stack plus reserves for a scrub, meaning they should be able to launch with the current configuration if necessary.

121

Additional storage can then be added over time.

122

SpaceX is also storing many additional parts near LC -39A, including several vaporizers and three smaller sub -coolers,

123

which could very well end up being installed on the methane side of the LC -39A tank farm.

124

Just inside LC -39A, there are also three transport stands that were barged over transport stands and one booster transport stand,

125

currently located in front of the Horizontal Integration Facility.

126

There are still many milestones remaining for the 39A Starship pad, including launch mount top -deck water deluge testing, full launch rehearsal retracts, vehicle tanking tests,

127

and a booster static fire, among others.

128

Just recently, booster 22 and ship 42 began stacking in their respective megabays.

129

If everything proceeds smoothly on flights 13 and 14, potentially by the end of the year.

130

Moving over to SpaceX's second Starship launch complex at the Cape, located at Slick 37, construction is continuing to make steady progress.

131

So far at 37A, the LR13000 crane has stacked four out of nine modules for the tower.

132

Each of these tower modules has been fitted with more hardware

133

ahead of stacking than the other three towers SpaceX has assembled so far, thanks to the LR13000 crawler crane being the most powerful crawler crane in the world.

134

excavated and rebar installation for the three sections of the trench floor is currently underway.

135

Meanwhile the other major components of Slick 37A, the ship quick disconnect arm, chopsticks and carriage are all being worked on off to the side.

136

The carriage and chopstick arms were assembled months ago at Roberts Road and then transported to Slick 37.

137

It is worth noting however that they arrived in a fairly bare state

138

so there is still a significant amount of work left to

139

complete on them at this site before they can be installed on the tower.

140

Three also arrived and are now awaiting installation in their respective positions within the launch complex.

141

Pedestals for all of the tanks have now been moved into place in the suspected Deluge farm location

142

and pedestals for storage tanks on one side of the suspected tank farm area have also been installed.

143

SpaceX is likely waiting for additional orders of cryogenic storage tanks to arrive over the next few years.

144

There is also considerable groundwork taking place near the slick 37A tower modules that are still due to be stacked.

145

This area SLIC -37B, the second Starship pad at this launch complex.

146

In addition, new electrical work is underway along one side of the suspected tank farm.

147

We will likely see much more of this across the rest

148

of SLIC -37 as SpaceX continues developing the site for its two planned Starship launch pads.

149

It will likely be a few years before even one of these pads is fully operational, mainly due to lead times for cryogenic storage tanks and other key hardware.

150

But that's not everything.

151

In fact, our flyover covers more companies than just SpaceX, including Blue Origin, Stokes Space, Relativity and of course, NASA's operations.

152

To see those, make sure to check out our next Space Coast update.

153

Taking a look at the only Starship pad that is currently online, Pad 2 saw a total of four deluge tests this week.

154

Three of these tests used the flame bucket, ridge cap and even the top deck.

155

The remaining tests involved the ridge cap and top deck as well, but did not use the bucket itself.

156

This is the first time since Flight 12 that the system has been

157

value system to protect the pad against launch

158

and then firing it again a few minutes later to protect the pad against the exhaust of a returning super heavy booster.

159

We can tell that the second run is for a landing not only

160

because of the timing but also because the sequence of when each part starts is different to launch.

161

With the scaffolding now removed from the launch mount it appears

162

B20 could be heading to the launch site soon as the launch mount side of things looks ready.

163

Of course the booster itself still needs to be as we saw them simulating a booster lift onto the mount.

164

On top of that, the chopsticks also performed three high -speed simulated vehicle catches and landing rail movements.

165

With SpaceX having added world doublers to the chopsticks and carried out work on the landing rails a few weeks ago, these small tests appear to be aimed at confirming

166

that nothing major arises before they are put into action during an actual booster or ship lift.

167

While neither Booster 20 nor Ship 40 will be caught at the launch site, it is encouraging to see SpaceX looking ahead

168

and using this downtime to carry out this work to minimize gaps between launches in preparation for

169

when they eventually do a booster catch or ship catch, possibly even on flight 14 with booster 21.

170

The ship quick disconnect arm also appears to be receiving attention

171

as SpaceX has installed scaffolding around the shoulder of the arm where the engine chill line is located.

172

Engine chill down is performed to cool the engines while they are running by flowing cryogenic propellant through the engine bell.

173

Flowing this cryogenic prop through the engine bell must be ramped up gradually in

174

the cold cryogenic fluid would otherwise expand too rapidly due to the large temperature difference between the propellants and the engine hardware.

175

The pressure generated by the rapid temperature change could become severe enough to damage the engine.

176

Gradually increasing the flow allows the engines to cool down slowly and keeps pressures within operational limits.

177

It's time for our McGregor Minute where we saw as usual

178

a new record -breaking Raptor 3 serial number pass by our 24 -7 McGregor Live cameras.

179

The Raptor serial number in question was 188.

180

Being a sea -level Raptor engine, for either a future booster or a ship.

181

However, we also saw a vacuum Raptor engine roll by this week with an unknown serial number.

182

That engine was not the only Raptor scene moving through the site, as a total of eight engines were observed in all, two of which were Raptor vacuum engines.

183

With Flight 13 getting closer and closer and Ship 40 testing now complete, the launch site is getting ready for a static fire campaign.

184

Hopefully we'll see Booster 20 rolling out soon.

185

But for now, I've been Ryan Caden for NSF, thanks for watching and goodbye.

앱 다운로드

유창하게 말하는 데 필요한 모든 것

AI 발음 평가문장마다 점수 확인

IPA 발음 연습모든 소리 마스터

단어 학습나만의 단어장 만들기

단어 게임놀면서 외우기

QR 스캔

Download on theApp Store Get it onGoogle Play

같은 채널

SpaceX Is Ready to Send Starship Into Orbit | This Week in Spaceflight

Daily ConversationUniversity StudentsWorking Adults

"SHIP GOES HERE" for flight 14 - Starbase Summary

Daily ConversationWorking Adults

Starship Flight 14 Goes Orbital! SpaceX Reveals 10-Hour Mission | Starship Update

Daily ConversationWorking Adults

FOR YOU

왜 이 비디오로 말하기 연습을 해야 할까요?

이 비디오는 우주선 테스트와 관련된 흥미로운 내용을 담고 있습니다. 우주 및 기술에 대한 대화를 통해 고급 영어 표현과 어휘를 익힐 수 있는 기회를 제공합니다. 유튜브 영어 공부는 일상적인 대화 외에도 다양한 분야에서의 전문적인 용어와 표현을 배울 수 있는 좋은 방법입니다. 이 비디오를 보면서 직접 목소리를 내며 말하기 연습을 하면 IELTS 스피킹 같은 시험에서도 도움이 될 것입니다. 실제 대화 상황에서 사용할 수 있는 표현을 습득하게 됩니다.

문법 및 문맥 속의 표현들

"What's up with that?" – 이 표현은 상황이나 문제에 대한 궁금증을 나타내는 비격식적 표현으로, 실생활에서 자주 사용됩니다.
"SpaceX is wasting no time..." – "wasting no time"은 빠르게 행동하고 있다는 의미로, 일반적인 구어체에서 자주 사용되는 표현입니다. 이런 표현을 통해 영어에서의 간결함과 자연스러움을 느낄 수 있습니다.
"It's been a game of musical chairs..." – 여기서 "musical chairs"라는 비유는 상황의 변화를 재미있게 설명하는데, 복잡한 내용을 설명할 때 다양한 비유적 표현을 사용하는 것이 영어 구사능력을 높이는 데 큰 도움이 됩니다.

일반적인 발음 함정

비디오에는 발음이 어려운 몇 가지 단어와 구문이 있습니다. 특히 "cryogenic"과 같은 전문 용어는 발음이 까다롭습니다. 이 단어를 연습할 때에는 천천히 발음해보고, 각 음절을 분명하게 하려는 노력이 필요합니다. 영어 발음 교정에 있어 이러한 단어들을 반복해서 발음하는 것이 효과적입니다. 또한 "flap tests"와 같이 'f'와 'l'의 결합 발음도 주의해야 합니다. shadow speak 연습을 통해 이러한 함정을 극복하고 자연스러운 발음을 연습할 수 있습니다.

이 영상의 문법

화자가 가장 많이 쓰는 문형을 영상 속 실제 표현과 함께 정리했습니다.

문형	영상 속 표현
현재완료진행 have/has been + -ing — 전에 시작해 지금도 계속되는 동작	have been treating · has largely been sitting
현재완료 have/has + 과거분사 — 과거의 일이 지금도 관련이 있을 때	It's been · has now been · has already begun
수동태 be + 과거분사 — 누가 하는지보다 무슨 일이 일어나는지에 초점	been fully stacked · being stacked · was rolled
관계절 who / which + 절 — 사람이나 사물에 대한 추가 정보	Bay, which is · design, which has · itself, which has

쉐도잉이란? 영어 실력을 빠르게 키우는 과학적 방법

쉐도잉(Shadowing)은 원래 전문 통역사 훈련을 위해 개발된 언어 학습 기법으로, 다언어 학자인 Dr. Alexander Arguelles에 의해 대중화된 방법입니다. 핵심 원리는 간단하지만 매우 강력합니다: 원어민의 영어를 들으면서 1~2초의 짧은 지연으로 즉시 소리 내어 따라 말하는 것——마치 '그림자(shadow)'처럼 화자를 따라가는 것입니다. 문법 공부나 수동적인 청취와 달리, 쉐도잉은 뇌와 입 근육이 동시에 실시간으로 영어를 처리하고 재현하도록 훈련합니다. 연구에 따르면 이 방법은 발음 정확도, 억양, 리듬, 연음, 청취력, 말하기 유창성을 크게 향상시킵니다. IELTS 스피킹 준비와 자연스러운 영어 소통을 원하는 분들에게 특히 효과적입니다.

섀도잉 방법: 단계별 전체 가이드 읽기 →

쉐도잉 연습: Starship Testing Takes an Unexpected Turn | Starship Update - 영상으로 영어 말하기 배우기

연습 모드 선택

앱 다운로드

같은 채널

SpaceX Is Ready to Send Starship Into Orbit | This Week in Spaceflight

"SHIP GOES HERE" for flight 14 - Starbase Summary

Starship Flight 14 Goes Orbital! SpaceX Reveals 10-Hour Mission | Starship Update

Possible Florida Starship? - Starbase Summary

The Chopsticks get Chopped - Starbase Summary

Artemis II Astronaut talks about being a Crew ✨🌎 #nasa #space #artemis

Launch Pads and Prep at Starbase (and Beyond) - Starship Summary

Flight 14 (and Gigabay) Milestones Shaping Up - Starbase Summary

Did This Camera Survive the Static Fire? - Starbase Summary

Starbase Catches up after Flight 13 | SpaceX Starbase

Ship 40 Survived! SpaceX Prepares for an Ambitious Flight 14 | Starship Update

"Well, it's Flight 13 Launch Week... Again" | SpaceX Starbase

"This is where I'd put my flight 13 footage..." | SpaceX Starbase

Single Engine Static Fire? Huh. | SpaceX Starbase

SpaceX Delays Flight 13 Further, Flight 14 Testing Starts! | Starship Update

SpaceX Is HIDING Something! | Starship Update

SpaceX preparing two Starship flights in parallel - Starbase Summary

추천 영상

We Won’t Explore the Galaxy...

ElevenLabs 2026 07 13T15 18 04 Hale Expressive, Deep and Emotive pvc sp100 s65 sb75 se29 b m2 1

Video

Flying the Air Force's $320M Supersonic B-1 Bomber

1,000km Cable to the Stars - The Skyhook

Artemis II Explained | 2026 Mission to the Moon

2012: SpaceX: Elon Musk's race to space

IELTS listening actual test Part 4: The international Space Station ISS (answer+ transcript)

My thoughts on the first round of UFO files

NASA tested my chain theory in space

왜 이 비디오로 말하기 연습을 해야 할까요?

문법 및 문맥 속의 표현들

일반적인 발음 함정

이 영상의 문법

쉐도잉이란? 영어 실력을 빠르게 키우는 과학적 방법