Практика Shadowing: Starship Testing Takes an Unexpected Turn | Starship Update - Изучайте разговорный английский по видео
Выберите режим практики
Каждый режим открывает полноэкранную комнату практики.
185 предложений
Если предложения слишком короткие или длинные, нажмите Edit, чтобы их изменить.
1
It's been a game of musical starships at Starbase, as Ship 40 and Ship 41 have been treating the Massey's test site like a hot potato.
2
What's up with that?
3
We've also got a bunch of hardware to discuss at SpaceX's Roberts Road, Launch Complex 39A, and even Space Launch Complex 37.
4
And if you're thirsty for more, Power 2 performed more deluge testing, including catch simulations as SpaceX prepares to bring the booster back to the launch site.
5
From Florida's Space Coast to South
6
We're starting this week's episode over at the production site,
7
where Booster 21 has now been fully stacked inside Mega Bay 1 and is being prepared for its cryogenic testing campaign.
8
However, the turntable inside Mega Bay 1 did not remain empty for long, as stacking has already begun on Booster 22.
9
With Booster 22's liquid oxygen tank already standing four sections tall, the vehicle is progressing through stacking much faster than Booster 19.
10
process.
11
But Booster 22 was not the only vehicle being stacked.
12
Over in Mega Bay 2, Ship 42's nose cone was rolled in, ready for stacking.
13
Ship 42 currently consists of its nose cone, PES dispenser, payload bay section and forward dome.
14
Just as we're seeing with the boosters, SpaceX is wasting no time with ship production either.
15
Just like how you shouldn't waste any time with pressing that subscribe button.
16
Vehicles aren't the only things growing at the production site.
17
Construction of the final level of the Gigabay is continuing, while be the last level they are required to build.
18
Just as we have seen over at Roberts Road, a crawler crane will be used to both dismantle the tower cranes and to complete the roof.
19
After all, the tower cranes cannot exactly finish the roof while they are still sticking through it.
20
Two turntable pieces, likely destined for the Gigabay, have also arrived from Huddleston, SpaceX's storage facility just down the road.
21
Just like the Megabays, the Gigabay will use turntables to weld barrel sections together during vehicle stacking.
22
Looking inside the last week has received six smaller flanges beneath the large flange.
23
These smaller flanges could allow additional actuators to push or pull on hardware inside the nose cone.
24
However, that's only speculation so we will have to keep watching for further developments surrounding this nose cone.
25
Over at Massey's, SpaceX was playing a game of musical chairs with its ships this week, as Ship 40 and Ship 41 swapped places more than once.
26
Ship 41 rolled out to Massey's last week after Ship 40 unexpectedly returned to the production site, having completed only a single engine static fire test.
27
But if that was not strange enough, Ship 41 only carried out two cryogenic tests on the same
28
night before SpaceX decided it had spent enough time at the truss structure for the moment.
29
It was then rolled back to the production site so
30
that Ship 40 could return to Massey's and complete its static fire testing campaign.
31
One possible explanation is that SpaceX identified an issue
32
that prevented a six engine static fire but did not stop them from carrying on the static fire stand,
33
they took advantage of the opportunity and completed that single -engine static fire last week.
34
During Ship 40's return to the production site, SpaceX appears to have resolved whatever was preventing the six -engine static fire
35
while Ship 41 began the first stage of its cryogenic testing campaign.
36
Once the two ships had swapped over again, Ship 40 was loaded with cryogenic propellants and even carried out both forward
37
and aft flap tests that finally cleared the way for the long -awaited 60 -second six -engine static fire. With
38
that milestone complete, Ship 40 was rolled back to the production site for its final pre -flight preparations ahead of Flight 13.
39
With this data in hand, when do you think Flight 13 will take place?
40
Let us know in the comments.
41
With Ship 40 back at the production site, it was then Ship 41's turn to return to Massey's and complete the rest of its cryogenic testing campaign.
42
One thing is for certain, the rollout team's got plenty of experience this week.
43
its static fire testing campaign it can put its feet up in Mega Bay 2
44
and make the most of the final days of the summer
45
sail at shop .nasaspaceflight .com where you can save 10 to 20 % on the summer collection.
46
It's perfect for
47
when it eventually splashes down in the Indian Ocean to join the super heavy swim club or
48
if it needs to patch up its heat shield with the
49
Starship heat shield grill apron after getting thoroughly cooked by the plasma of re -entry.
50
For Ship 41 however the completed no visible testing whatsoever,
51
but it could have done ambient testing.
52
After all, an ambient test can uncover issues with a vehicle.
53
Just ask Booster 18.
54
As Ship 41 is now sitting inside Mega Bay 2 on the engine installation stand, the next time it rolls out, it should be for a static fire test.
55
Last week we saw that the Super Crusher had its cap removed, indicating that this configuration has now completed testing.
56
This week we also saw the ship skirt section removed as
57
installed on top of it
58
and was used to simulate how a ship would press against the integrated hot stage ring during all phases of flight.
59
The future of B18 .3 is somewhat uncertain, but it is possible that SpaceX will go on to test the grid fin motors.
60
At present, only the sockets where the grid fins are mounted have undergone structural testing, not the motors that actually rotate the grid fins themselves.
61
Understanding how these motors perform will help SpaceX determine how quickly the booster can make attitude adjustments during re -entry, improving its ability to steer through the airflow.
62
As some of you may have noticed, we carried out a flyover of Cape Canaveral this past week, which gave us an updated view of components currently under construction.
63
This includes Roberts Road, Launch Complex 39A, and Space Launch Complex 37, all of which are at various stages of development.
64
First off, the Giga Bay at Roberts Road began construction around March 2025, when the foundation work started with continuous flight auger piles.
65
Since then, crews have made significant progress.
66
As of July 2026, the structural steel is complete, with cladding and roofing now nearing completion.
67
Both smaller doors on the north side of the building have been installed, with work now progressing on the two large doors on the south side, through which completed vehicles will eventually roll out.
68
The penthouse section of the Giga Bay, which is the final floor below the roof, does not appear to cover the entire footprint.
69
There will be areas where workers can look down into the aisles below and observe vehicles being worked on.
70
At present, it is not yet known what SpaceX will install on this level.
71
It is possible it could house an updated launch control facility for Cape Canaveral, given the eastern side provides a clear view of the launch pads.
72
beginning to take shape next to Hangar X2.
73
These appear to follow a different design from those currently used in Mega Bay 1 and Mega Bay 2 at Starbase.
74
It will become clearer how they function once similar units are built at Starbase, but the potential booster work stand currently appears to have six arms rather than ten, as seen in Mega Bay 1.
75
Another interesting piece of hardware spotted in this area is a possible jig being assembled under a tent,
76
which may be used to assist in transitioning boosters between horizontal and vertical orientations.
77
Launchpad work is also Roberts Road, with construction of the Slick 37A launch mount now underway and all eight first -level sections in place.
78
This design, which has already been completed twice, has so far taken crews around six months to reach this stage before being rolled out to the pad.
79
At least three of the four top -deck dilute sections have also been spotted.
80
Nearby, two manifolds required to supply water to the top deck are also visible.
81
Other equipment seen around Roberts Road includes valve skids and
82
intended for either the liquid oxygen system at 39A or for Slick 37 once construction reaches that stage.
83
Finally, a pair of new buildings is under construction at Roberts Road.
84
One is Hangar X3, while the other remains unnamed.
85
It is not yet clear what these will be used for, whether warehouses or fabrication facilities.
86
Moving on to LC39A, which resumed work in February 2025, progress on the launch pad is now on the home straight,
87
with it likely only a few months away been significantly faster nor slower than Pad 2 at Starbase.
88
While crews already had a tower and chopsticks at LC -39A, both were effectively empty shells, whereas at Starbase Pad 2,
89
crews already had the required propellant storage tanks in place.
90
A major indication that the Pad is nearing operational status is that ridge cap and bucket deluge testing has now begun.
91
So far, only a few tests have been observed, but this is a positive sign as SpaceX still needs to refine the new
92
SpaceX has added additional gas generators to each water deluge subsystem.
93
This means the deflector buckets now have five generators, the ridge cap has three, and the top deck has four.
94
For reference, Pad 2 currently has four for the buckets, two for the ridge cap, and three for the top deck.
95
This is an upgrade that Pad 2 at Starbase will likely receive later on once there is sufficient downtime, while Pad 1 is likely to receive the upgrade more immediately.
96
Another Beyond the flame trench exits, there are dips in the concrete with drainage at the base,
97
designed to help recapture as much unused deluge water as possible.
98
SpaceX does not have the room to install a system like this at Starbase, but it could potentially be installed at both planned Svig 37 pads.
99
Another major test was also completed recently.
100
The IB -proofing structural test and alignment tool was used on the launch mount.
101
This piece of equipment was built at Starbase to help load test and align all 20 hold -down arms and clamps.
102
at Cape Canaveral for use on Slic 37A or return to Starbase for pad one, although both uses are still at least 12 months away.
103
Moving on, the service structure now appears to have most, if not all, of its cadding installed.
104
This does not necessarily mean the interior is complete, as there may still be significant finishing work ongoing inside.
105
The final remaining items to be installed include the methane booster quick disconnect door, the rear hoods for both BQDs,
106
milestone is that the chopsticks are finally reaved, meaning they can now move up and down the tower.
107
The chopstick carriage was installed on the LC -39A tower in January 2023, three months before Starship Flight 1 launched,
108
meaning it has largely been sitting idle on the tower for several years.
109
It does raise questions about how rusted the bearing skates may have become after such a long period in the Florida weather.
110
Looking more closely at one of the chopsticks, we can see that has these installed as well.
111
The tower itself, which has been stacked since September 2022, has recently begun receiving cladding, marking another major milestone in construction progress.
112
The drawworks housing at the rear of the tower base has also been modified to include a sloped protective roof, similar to what is seen on the Starbase Pad 2 tower base.
113
One of the final pieces of the tower will be the installation of the new cladded roof,
114
which still requires final Federal this roof is planned to include a 10 -foot lightning tower on top,
115
which is far more necessary in Florida than South Texas.
116
Another area of interest is the blast wall constructed to protect the tank farm from extremely powerful launches.
117
It is worth noting that more of this blast wall still needs to be built, so it extends all the way to the far end of the methane side of the tank farm.
118
Speaking of the tank farm, two additional liquid oxygen storage tanks were installed a few months ago, bringing the total to six.
119
There are still empty positions for further storage tanks on both the liquid oxygen and liquid methane sides of the tank farm, as well as additional liquid nitrogen storage tanks on both sides.
120
likely already has sufficient capacity for a full stack plus reserves for a scrub, meaning they should be able to launch with the current configuration if necessary.
121
Additional storage can then be added over time.
122
SpaceX is also storing many additional parts near LC -39A, including several vaporizers and three smaller sub -coolers,
123
which could very well end up being installed on the methane side of the LC -39A tank farm.
124
Just inside LC -39A, there are also three transport stands that were barged over transport stands and one booster transport stand,
125
currently located in front of the Horizontal Integration Facility.
126
There are still many milestones remaining for the 39A Starship pad, including launch mount top -deck water deluge testing, full launch rehearsal retracts, vehicle tanking tests,
127
and a booster static fire, among others.
128
Just recently, booster 22 and ship 42 began stacking in their respective megabays.
129
If everything proceeds smoothly on flights 13 and 14, potentially by the end of the year.
130
Moving over to SpaceX's second Starship launch complex at the Cape, located at Slick 37, construction is continuing to make steady progress.
131
So far at 37A, the LR13000 crane has stacked four out of nine modules for the tower.
132
Each of these tower modules has been fitted with more hardware
133
ahead of stacking than the other three towers SpaceX has assembled so far, thanks to the LR13000 crawler crane being the most powerful crawler crane in the world.
134
excavated and rebar installation for the three sections of the trench floor is currently underway.
135
Meanwhile the other major components of Slick 37A, the ship quick disconnect arm, chopsticks and carriage are all being worked on off to the side.
136
The carriage and chopstick arms were assembled months ago at Roberts Road and then transported to Slick 37.
137
It is worth noting however that they arrived in a fairly bare state
138
so there is still a significant amount of work left to
139
complete on them at this site before they can be installed on the tower.
140
Three also arrived and are now awaiting installation in their respective positions within the launch complex.
141
Pedestals for all of the tanks have now been moved into place in the suspected Deluge farm location
142
and pedestals for storage tanks on one side of the suspected tank farm area have also been installed.
143
SpaceX is likely waiting for additional orders of cryogenic storage tanks to arrive over the next few years.
144
There is also considerable groundwork taking place near the slick 37A tower modules that are still due to be stacked.
145
This area SLIC -37B, the second Starship pad at this launch complex.
146
In addition, new electrical work is underway along one side of the suspected tank farm.
147
We will likely see much more of this across the rest
148
of SLIC -37 as SpaceX continues developing the site for its two planned Starship launch pads.
149
It will likely be a few years before even one of these pads is fully operational, mainly due to lead times for cryogenic storage tanks and other key hardware.
150
But that's not everything.
151
In fact, our flyover covers more companies than just SpaceX, including Blue Origin, Stokes Space, Relativity and of course, NASA's operations.
152
To see those, make sure to check out our next Space Coast update.
153
Taking a look at the only Starship pad that is currently online, Pad 2 saw a total of four deluge tests this week.
154
Three of these tests used the flame bucket, ridge cap and even the top deck.
155
The remaining tests involved the ridge cap and top deck as well, but did not use the bucket itself.
156
This is the first time since Flight 12 that the system has been
157
value system to protect the pad against launch
158
and then firing it again a few minutes later to protect the pad against the exhaust of a returning super heavy booster.
159
We can tell that the second run is for a landing not only
160
because of the timing but also because the sequence of when each part starts is different to launch.
161
With the scaffolding now removed from the launch mount it appears
162
B20 could be heading to the launch site soon as the launch mount side of things looks ready.
163
Of course the booster itself still needs to be as we saw them simulating a booster lift onto the mount.
164
On top of that, the chopsticks also performed three high -speed simulated vehicle catches and landing rail movements.
165
With SpaceX having added world doublers to the chopsticks and carried out work on the landing rails a few weeks ago, these small tests appear to be aimed at confirming
166
that nothing major arises before they are put into action during an actual booster or ship lift.
167
While neither Booster 20 nor Ship 40 will be caught at the launch site, it is encouraging to see SpaceX looking ahead
168
and using this downtime to carry out this work to minimize gaps between launches in preparation for
169
when they eventually do a booster catch or ship catch, possibly even on flight 14 with booster 21.
170
The ship quick disconnect arm also appears to be receiving attention
171
as SpaceX has installed scaffolding around the shoulder of the arm where the engine chill line is located.
172
Engine chill down is performed to cool the engines while they are running by flowing cryogenic propellant through the engine bell.
173
Flowing this cryogenic prop through the engine bell must be ramped up gradually in
174
the cold cryogenic fluid would otherwise expand too rapidly due to the large temperature difference between the propellants and the engine hardware.
175
The pressure generated by the rapid temperature change could become severe enough to damage the engine.
176
Gradually increasing the flow allows the engines to cool down slowly and keeps pressures within operational limits.
177
It's time for our McGregor Minute where we saw as usual
178
a new record -breaking Raptor 3 serial number pass by our 24 -7 McGregor Live cameras.
179
The Raptor serial number in question was 188.
180
Being a sea -level Raptor engine, for either a future booster or a ship.
181
However, we also saw a vacuum Raptor engine roll by this week with an unknown serial number.
182
That engine was not the only Raptor scene moving through the site, as a total of eight engines were observed in all, two of which were Raptor vacuum engines.
183
With Flight 13 getting closer and closer and Ship 40 testing now complete, the launch site is getting ready for a static fire campaign.
184
Hopefully we'll see Booster 20 rolling out soon.
185
But for now, I've been Ryan Caden for NSF, thanks for watching and goodbye.
Скачать приложение
Всё для свободной речи
ИИ-оценка произношенияОценка каждой фразы
Практика IPAОсвойте каждый звук
СловарьСоберите свой словарный запас
Игра со словамиУчитесь играя
Тот же канал
C12
Possible Florida Starship? - Starbase Summary
Daily ConversationWorking Adults
C11
SpaceX Is Ready to Send Starship Into Orbit | This Week in Spaceflight
Daily ConversationUniversity StudentsWorking Adults
C12
"SHIP GOES HERE" for flight 14 - Starbase Summary
Daily ConversationWorking Adults
C15
Starship Flight 14 Goes Orbital! SpaceX Reveals 10-Hour Mission | Starship Update
Daily ConversationWorking Adults
B24
The Chopsticks get Chopped - Starbase Summary
Business EnglishUniversity StudentsWorking Adults
B21
Artemis II Astronaut talks about being a Crew ✨🌎 #nasa #space #artemis
Daily ConversationUniversity StudentsWorking Adults
B25
Launch Pads and Prep at Starbase (and Beyond) - Starship Summary
Business EnglishUniversity StudentsWorking Adults
C16
Flight 14 (and Gigabay) Milestones Shaping Up - Starbase Summary
Business EnglishUniversity StudentsWorking Adults
C12
Did This Camera Survive the Static Fire? - Starbase Summary
University StudentsWorking Adults
B14
Starbase Catches up after Flight 13 | SpaceX Starbase
Daily ConversationUniversity StudentsWorking Adults
B27
Ship 40 Survived! SpaceX Prepares for an Ambitious Flight 14 | Starship Update
IELTS PrepTOEFL PrepUniversity Students
B24
"Well, it's Flight 13 Launch Week... Again" | SpaceX Starbase
Business EnglishUniversity StudentsWorking Adults
C16
"This is where I'd put my flight 13 footage..." | SpaceX Starbase
IELTS PrepTOEFL PrepUniversity Students
B26
Single Engine Static Fire? Huh. | SpaceX Starbase
IELTS PrepTOEFL PrepUniversity Students
C14
SpaceX Delays Flight 13 Further, Flight 14 Testing Starts! | Starship Update
Business EnglishUniversity StudentsWorking Adults
C19
SpaceX Is HIDING Something! | Starship Update
IELTS PrepTOEFL PrepUniversity Students
B26
SpaceX preparing two Starship flights in parallel - Starbase Summary
Daily ConversationUniversity StudentsWorking Adults
FOR YOU
Рекомендуемое видео
C173
15 предложений
We Won’t Explore the Galaxy...
IELTS PrepTOEFL PrepUniversity Students
B22
43 предложений
ElevenLabs 2026 07 13T15 18 04 Hale Expressive, Deep and Emotive pvc sp100 s65 sb75 se29 b m2 1
IELTS PrepTOEFL PrepCambridge Exam Prep
C12
400 предложений
Video
IELTS PrepTOEFL PrepUniversity Students
C14
287 предложений
Flying the Air Force's $320M Supersonic B-1 Bomber
IELTS PrepTOEFL PrepUniversity Students
C12
77 предложений
1,000km Cable to the Stars - The Skyhook
IELTS PrepTOEFL PrepUniversity Students
B23
133 предложений
Artemis II Explained | 2026 Mission to the Moon
IELTS PrepTOEFL PrepUniversity Students
B22
120 предложений
PTE Retell Lecture July 2026 | Real Exam Questions With Answers | 4K Ultra HD Video
IELTS PrepTOEFL PrepUniversity Students
B29
107 предложений
IELTS listening actual test Part 4: The international Space Station ISS (answer+ transcript)
IELTS PrepTOEFL PrepUniversity Students
B22
190 предложений
2012: SpaceX: Elon Musk's race to space
IELTS PrepTOEFL PrepUniversity Students
C12
151 предложений
My thoughts on the first round of UFO files
IELTS PrepTOEFL PrepUniversity Students
Об этом уроке
На этом уроке вы будете практиковать навыки английской речи, ориентируясь на динамичный стиль и содержание видео о тестировании Starship. Мы будем акцентировать внимание на различных аспектах разработки и тестирования космических аппаратов, обсуждая ключевые моменты и термины, которые позволят вам улучшить вашу разговорную практику. Этот урок идеально подходит для тех, кто хочет углубить свои знания в области технологий, а также развить свои навыки тени через shadowing.
Ключевая лексика и фразы
- тестирование (testing) - процесс проверки работоспособности систем.
- космический корабль (spacecraft) - транспортное средство, предназначенное для полетов в космос.
- статический огневой тест (static fire test) - испытание двигателей на земле.
- криогенное тестирование (cryogenic testing) - опыт в условиях низких температур.
- протонный контейнер (payload bay) - отсек для размещения полезной нагрузки.
- рабочая платформа (launch pad) - место, откуда начинается запуск.
- модуль (module) - отдельная часть системы или устройства.
- прогресс (progress) - процесс продвижения вперед в какой-либо деятельности.
Советы по практике
Во время просмотра видео обратите внимание на темп и интонацию ораторов. Задачей shadow speaking является подстраивание под их ритм, поэтому повторяйте за ними сразу же, как только они произносят фразы. Начинайте с медленного воспроизведения в начале, а затем постепенно увеличивайте скорость. Такой подход поможет улучшить ваше shadowing английский на практике и сделает вашу речь более естественной.
Кроме того, концентрируйтесь на выделении ключевых слов и интонации, на которых акцентируют ваше внимание говорящие. Для достижения наилучших результатов старайтесь уловить и повторять не только текст, но и чувства и эмоции, которые передаются через речь. Используйте shadowspeaks для улучшения вашей произносительной подготовки и повышения уверенности в разговоре.
Грамматика в этом видео
Конструкции, которые говорящий использует чаще всего, с точными словами из видео:
| Конструкция | В видео |
|---|---|
| Present Perfect have/has + причастие прошедшего времени — прошлое действие, важное сейчас | It's been · has now been · has already begun |
| Пассивный залог be + причастие прошедшего времени — важно, что происходит, а не кто это делает | being stacked · was rolled · are required |
| Придаточные определительные who / which + предложение — уточнение о человеке или предмете | Bay, which is · design, which has · itself, which has |
Что такое техника Shadowing?
Shadowing — это научно обоснованная техника изучения языка, изначально разработанная для подготовки профессиональных переводчиков и популяризированная полиглотом доктором Александром Аргуэльесом. Метод прост, но эффективен: вы слушаете аудио на английском от носителей языка и немедленно повторяете вслух — как тень, следующая за говорящим с задержкой в 1–2 секунды. В отличие от пассивного прослушивания или грамматических упражнений, Shadowing заставляет мозг и мышцы рта одновременно обрабатывать и воспроизводить реальные речевые паттерны. Исследования показывают, что это значительно улучшает точность произношения, интонацию, ритм, связную речь, понимание на слух и беглость речи — что делает его одним из самых эффективных методов для подготовки к IELTS Speaking и реального общения на английском.