Shadowing Practice: Fix your Trousers Fitting Issues | Body Specific Adjustments (Part 1) - Learn English Speaking with Video
Les maken...
1
Hi everyone, my name is Nuria and this is Mastering Journey.
2
And for today's video, I'm bringing you something I've been working on for a long time and it's trouser fitting issues.
3
There's a lot to cover,
4
so I've decided to split the content into two different videos.
5
One for body-specific issues, things that you can change before you make the first prototype.
6
And a second video that is going to be once you have the first prototype
7
and the second and the third and the etc. Things you can fix once you're in the prototyping phase.
8
And if you want to know more about it,
9
I have a cheat sheet with everything for both videos on my website.
10
You can go and check it out.
11
And if you're interested in learning everything you need to know to design trouser patterns,
12
I'm writing an ebook and you can join the waitlist now to get notified when it comes out.
13
But without further ado, let's get into the content of this video.
14
First things first, we're going to look into the initial checks.
15
These are things that you always have to check before doing your prototype or after you've made any change to your pattern.
16
The first one is truing the side seams.
17
You will have to check if the front and back side seams are the same length.
18
If that's not the case,
19
add a little bit to the shorter part
20
and remove the same amount from the longer part and then you will have to make them equal.
21
The second issue is the crotch length.
22
Measure the crotch length of your body and compare it to the length of the pattern.
23
The pattern should be at least equal or longer than your measurement.
24
If that's not the case you will have to extend it.
25
Depending on how much you have to extend you can cut through the hip line
26
and add the length there or even add it to the waist
27
but if it's too much then we'll get into the next video
28
and I'll show you how to do it in the next video for the prototyping.
29
The next issue is checking all the circumferences.
30
To do that measure the upper thigh,
31
the knee and the ankle circumferences of your body and compare them to the pattern.
32
The measurements on the pattern should be a little bit bigger to account for movement ease.
33
The ease will depend on the type of foundation you choose
34
and the leg line of your design
35
but they should always be at least two centimeters wider and if that's not the case just make them bigger.
36
The next issue is going to be the grainline.
37
The grainline is the middle division of the pants pattern and some modifications will require you to shift it.
38
Always make sure that it's halfway along the crotch line.
39
And the last issue is truing the curves.
40
All the curved transitions should be smooth
41
and to make sure that's the case align all the pieces
42
and close the darts and redraw them and this stands for the waist and the crotch lines.
43
And now that this is clear let's get into body specific issues.
44
We're going to start at the waist.
45
Different people have different postures and this can be accounted for in your pattern.
46
The standard position is considered to be a perpendicular line from the floor with no back arch.
47
From that posture we have the forward tilt and the backward tilt.
48
The forward tilt is the most common one and the back is arched towards your tummy.
49
This means your front pattern will need to be shorter than the standard.
50
And to fix this issue do the following.
51
First line up the pattern pieces.
52
Second draw a horizontal line perpendicular to the grain line at hip level.
53
Then check your side view to decide how much to remove.
54
I would advise you not to remove the whole thing.
55
It's always better to have more fabric than less when you are prototyping.
56
And then finally remove the amount from the front and add it to the back.
57
We do this because we want the crotch length to stay the same
58
because if you did it at the beginning you check that the crotch length was the right amount.
59
Now let's look into the backward tilt.
60
You have a backward tilt if your back and shoulders are rounded towards the back.
61
If this is the case,
62
the back pattern will need to be shorter than the standard.
63
To fix it, we'll follow exactly the same procedure
64
but this time you'll reduce the amount from the back and add it to the front.
65
This adjustment will probably cause the center front
66
and the center back to be at a bigger angle than before which will cause issues somewhere else.
67
If you want to fix this issue,
68
go to the waist definition chapter for the front and to the bus shape chapter for the back.
69
The next waist related issue is going to be your waist shaping
70
and this is important to understand what the center front and the center back lines are going to be used for.
71
If you have no waist definition,
72
also called rectangular body shape,
73
the center front line should be parallel to the grain line.
74
If on the other hand you have a defined waist like an hourglass figure or prominent hips for example,
75
the center front line should be at an angle.
76
And in this chapter I also want to talk to you about the full belly adjustment.
77
This adjustment is for people with prominent bellies or for ladies that are pregnant.
78
And there's two ways of fixing this issue
79
and it will depend on how much ease you have to add to the pattern.
80
The first option is if you need up to one centimeter or three-eighths of an inch.
81
If that's the case you can add the length vertically
82
and horizontally to the center front and
83
if on the other hand you need more than that you'll have to do the following.
84
First draw a parallel line to the crotch line above the hip line and it doesn't really matter where.
85
Second, connect this line to the side edge of the waistline.
86
Then you'll have to draw another line that is perpendicular to the first one from the waist to the line.
87
You can also use the darts but it's going to get confusing if you do that.
88
Then cut through both lines up to the waist but not through the waist.
89
Add as much ease as you need to the pattern
90
and this will angle your center front line which we don't want because if you remember that's for the hourglass figure.
91
So So to fix it,
92
you'll have to use the second line to make it straight.
93
And once you're done you can redraw all the lines and you're ready.
94
As always it's easier to have more fabric than less.
95
And what you can do is also combine option one and option two.
96
Now let's move into the butt adjustments.
97
Here we also have two different adjustments.
98
The first one is how to fix the pattern for a low butt.
99
You have a low butt if your widest part around the hips sits below the crotch line.
100
The standard pattern looks like this.
101
The crotch length doesn't cross your crotch line,
102
but for a low butt your curve should cross that crotch line.
103
To fix it just redraw the curve and lower it a bit at a time during the prototyping phase.
104
When you do this adjustment it is very possible that the horizontal space gets reduced.
105
This means we have to correct that issue.
106
To do that draw a line where the curve starts and measure the difference between both lines.
107
Then add that width to the crotch extension and the pattern is ready.
108
It is very important to understand that this fitting issue will fix the position of your butt but not the shape.
109
Let's look at how to modify the pattern to accommodate for the shape.
110
To make it simple we're going to define three different shapes.
111
The flat butt, the standard and the prominent.
112
If we look at how the pattern would look like you can see
113
that what changes here is the space in between the patterns.
114
So let's see how to move from one to another one.
115
For a flat butt we'll have to reduce the space.
116
To do it, add the needed length to the center back and reduce the same length from the side back.
117
We do it this way because the horizontal length of the pattern is already correct and you don't want to modify it.
118
I advise you to reduce one centimeter at a time also.
119
And for a prominent butt we'll do the opposite, we will add space.
120
To do that there's two options.
121
Option number one is to add the extra length to the crotch extension.
122
This will change the horizontal length of the pattern around your thighs
123
and if you have small thighs there might be too much extra fabric for you.
124
If you have small thighs what you can do is the opposite we did for the flat butt
125
so you move the center back line towards the side seam and add that same length to the side seam.
126
We're almost done let's move to the last two body specific adjustments.
127
These two adjustments have to do with your leg line.
128
The first that we're going to look into is if you have a prominent inner thigh or a knee.
129
A good way of knowing if you have a prominent thigh is
130
if when you walk your thighs touch each other and the trousers that are slim fitting are uncomfortable in that area.
131
Most of the times the length of the pattern is correct
132
but it's not in the right place
133
so what we're going to do for this adjustment is move it so it actually is in the right place.
134
This adjustment is done both at the front and at the back
135
but more at the back because you have more space to work with
136
so in this example I'm going to be showing the back
137
and also for this adjustment you should be adding one to two centimeters no more because then the pattern loses its shape.
138
Let's see how to do it.
139
First draw a horizontal line below the crotch line.
140
Then mark the grain line.
141
Next step is going to be cut through the line
142
and move the bottom piece of the pattern the amount you want to fix.
143
I wouldn't do more than one centimeter at a time.
144
Use the grain line to know how much you moved it
145
and finally redraw the leg lines to fit the pattern by adding to the center and removing from the side seam.
146
And now let's look into prominent cuffs.
147
You probably have a prominent calf
148
if the fabric is always tight around your calf with a little bit of extra fabric below your knee.
149
There's two ways of fixing this issue
150
but one of them I will leave it for the prototyping phase
151
because it has more to do with how you see the fabric behaving
152
but let's look at how to fix it before the prototype.
153
In this option will basically add a little bit of length to the pattern at calf level.
154
To do it, first draw the grain line,
155
then connect the grain line to the knee line,
156
cut through the lines but not through the knee points,
157
and add the amount you need.
158
You can leave the fix here,
159
but this will add flare to the bottom of your hem,
160
and if you don't want to change the leg line at all,
161
then I would advise you to do the following.
162
Draw two perpendicular lines to the grain line and cut through them
163
but not through the grainline
164
and use these lines to correct the hem back to being straight
165
and with that we're done with the body specific issues don't forget
166
that fixing one thing will potentially create another issue
167
and always always always it's better to have more fabric than less fabric
168
when prototyping
169
and also always remember to do all the checks we talked
170
about at the beginning after doing all these modifications you might think there's other issues like having a slayback
171
or an asymmetrical body, all these things,
172
I'm going to add them in the next video because as I said,
173
they have more to do of how the fabric behaves once you've done your prototype.
174
But if you think that I'm missing any specific body issue,
175
then also please let me know in the comments.
176
And as I said, if you don't want to wait for the next video,
177
you have the cheat sheet on my website and I'll link it down below.
178
But that's everything for today.
179
I hope this was useful.
180
This video was long time in the making and I'm really,
181
really, really excited that I finally got it out.
182
Trust me I know how frustrating it can be drafting your
183
own trouser patterns I think I've done like 2 000 prototypes
184
but I promise you it's all worth it because
185
if you look at me at the moment I'm only wearing trousers
186
that I made myself and I cannot tell you enough how proud I am
187
and how happy I am every day
188
that I get to wear my own mix so hang in there and I'll see you in the next one bye
📺 Zelfde Kanaal
✨ Aanbevolen Video
C11
197 zinnen
How to go from B1 to C1 in English
British AccentBusiness EnglishUniversity StudentsWorking Adults
C11
96 zinnen
Design Patterns in Java Theory
Business EnglishUniversity StudentsWorking Adults
C124 zinnen
Sofeast PCB Video Series Introduction
Business EnglishUniversity StudentsWorking Adults
B23
43 zinnen
This Fixed My Anterior Pelvic Tilt More Than Stretching
Business EnglishUniversity StudentsWorking Adults
![How to Create a Women’s Bodice Block from Body Measurements [Pattern Making Tutorial]](https://img.youtube.com/vi/Bn594SV1nXA/mqdefault.jpg)
C12
122 zinnen
How to Create a Women’s Bodice Block from Body Measurements [Pattern Making Tutorial]
Business EnglishUniversity StudentsWorking Adults
B21
70 zinnen
Sexist Design - Living in a World Designed for the Reference Man - BTN High
Business EnglishUniversity StudentsWorking Adults
C15
94 zinnen
Your AI broke the layout. Now what?
Business EnglishUniversity StudentsWorking Adults
B24
510 zinnen
The hygiene habits that changed everything for me | Tips every woman should know
Business EnglishDaily ConversationUniversity Students
B2270 zinnen
Fall Fashion Trends 2026 ✨ ft. Vogue, Who What Wear, Harper's Bazaar & More
Business EnglishDaily ConversationUniversity Students
C13
93 zinnen
NPI Process 1: Why A Pilot Run Before Mass Production Is Very Useful
Business EnglishUniversity StudentsWorking Adults
B24
128 zinnen
10 drawing exercises to dramatically improve your anatomy ✏️
Business EnglishUniversity StudentsWorking Adults
Woordenschat en spreektips bij deze les
Deze video bevat 188 zinnen en 2286 woorden om na te spreken. Het gesproken deel duurt 10:44. De spreker praat snel, ongeveer 213 woorden per minuut, dus reken op verbonden en ingeslikte klanken. 86% van de woorden hoort bij de 3.000 meest gebruikte Engelse woorden; de rest kun je beter vooraf bekijken.
Belangrijke woorden in deze video
15 minder gangbare woorden uit de video, met uitspraak en betekenis:
- prototype /ˈpɹəʊtətaɪp/ (zelfstandig naamwoord) — prototype. An original form or object which is a basis for other forms or objects (particularly manufactured items), or for its generalizations and models.
- waist /weɪst/ (zelfstandig naamwoord) — middel. The part of the body between the pelvis and the stomach.
- adjustment /əˈd͡ʒʌst.mənt/ (zelfstandig naamwoord) — aanpassen. The action of adjusting something.
- butt /bʌt/ (zelfstandig naamwoord) — kont, achterste. The buttocks or anus (used as a minced oath in idiomatic expressions; less objectionable than arse/ass).
- prominent /ˈpɹɑmɪnənt/ (bijvoeglijk naamwoord) — prominent, vooraanstaand. Standing out, or projecting; jutting; protuberant.
- grain /ɡɹeɪn/ (zelfstandig naamwoord) — koren, graan. The harvested seeds of various grass food crops, especially wheat, maize, rye, barley, and rice.
- thigh /θaɪ/ (zelfstandig naamwoord) — dij, bovenbeen. The upper leg of a human, between the hip and the knee.
- knee /ni/ (zelfstandig naamwoord) — knie. In humans, the joint or the region of the joint in the middle part of the leg between the thigh and the shank.
- curve /kɚv/ (zelfstandig naamwoord) — curve, kromming. A bend, such as in a road.
- horizontal /ˌhoɹəˈzɑn.təl/ (bijvoeglijk naamwoord) — horizontaal. Perpendicular to the vertical; parallel to the plane of the horizon; level, flat.
- tilt /tɪlt/ (werkwoord) — kantelen. To slope or incline (something); to slant.
- angle /ˈæŋ.ɡəl/ (zelfstandig naamwoord) — hoek. A figure formed by two rays which start from a common point (a plane angle) or by three planes that intersect (a solid angle).
- depend /dɪˈpɛnd/ (werkwoord) — afhangen. To be contingent or conditioned; to have something as a necessary condition
- backward /ˈbækwɚd/ (bijvoeglijk naamwoord) — achteruit, naar achteren. Situated toward or at the rear of something.
- calf /kɑːf/ (zelfstandig naamwoord) — kalf. A young cow or bull of any bovid, such as domestic cattle or buffalo.
Phrasal verbs die je zult horen
- come out /ˌkʌm ˈaʊt/ (werkwoord) — uitkomen. To be discovered; to be revealed.
- stand for (werkwoord) — staan voor. To mean; to symbolize; to represent; especially of an acronym or abbreviation.
Uitspraak om op te letten
De spreker gebruikt 42 samentrekkingen en verkorte vormen, zoals I'm, we're, don't. Spreek ze kort uit, zoals je ze hoort.
- De “th”-klanken: thigh /θaɪ/, smooth /smuːð/, eighth /eɪtθ/, width /ˈwɪtθ/
- De klanken “sh” en “zh”: extension /ɪkˈstɛnʃən/, sheet /ʃit/, measurement /ˈmɛʒ.ə.mənt/, modification /ˌmɑdɪfɪˈkeɪʃən/, transition /tɹænˈzɪʃ.ən/
- Lange woorden — let op de klemtoon: horizontal /ˌhoɹəˈzɑn.təl/, modification /ˌmɑdɪfɪˈkeɪʃən/, potentially /pəˈtɛnʃ(ə)li/, uncomfortable /ʌnˈkʌm.fɚ.tə.bl̩/, accommodate /əˈkɑməˌdeɪt/
Zo oefen je met deze video
- Luister de hele video één keer zonder te spreken en noteer de woorden die je niet kent.
- Begin op 0,75× snelheid, spreek zin voor zin na en ga terug naar normale snelheid zodra het makkelijk gaat.
- Neem jezelf op en vergelijk met het origineel; let daarbij op woorden als prototype, waist, adjustment.
Grammatica in deze video
De structuren die de spreker het meest gebruikt, met de exacte woorden uit de video:
| Structuur | In de video |
|---|---|
| Voorwaardelijke zinnen if + zin, will/would + werkwoord — een voorwaarde en het gevolg | If that's not the case you will have · if it's too much then we'll get |
| Lijdende vorm be + voltooid deelwoord — het gaat om wat er gebeurt, niet om wie het doet | can be accounted · is considered · is arched |
| Present perfect have/has + voltooid deelwoord — iets uit het verleden dat nu nog telt | I've decided · you've made · you've done |
Wat is de Shadowing-techniek?
Shadowing is een wetenschappelijk onderbouwde taalleermethode die oorspronkelijk is ontwikkeld voor professionele tolkentraining en gepopulariseerd door polyglot Dr. Alexander Arguelles. De methode is eenvoudig maar krachtig: je luistert naar native Engelse audio en herhaalt het onmiddellijk hardop — als een schaduw die de spreker volgt met slechts 1–2 seconden vertraging. In tegenstelling tot passief luisteren of grammaticadrills, dwingt shadowing je hersenen en mondspieren om echte spraakpatronen tegelijkertijd te verwerken en te reproduceren. Onderzoek toont aan dat het de uitspraaknauwkeurigheid, intonatie, ritme, verbonden spraak, luisterbegrip en spreekvaardigheid aanzienlijk verbetert — waardoor het een van de meest effectieve methoden is voor IELTS Speaking-voorbereiding en echte Engelse communicatie.