ฝึกพูดภาษาอังกฤษด้วยเทคนิค Shadowing จากวิดีโอ: The Ultimate IoT Roadmap in 2026? | Embedded Systems & IoT Career Roadmap

If you want to become IoT engineer in 2026, one thing is very important to understand.

The industry has changed a lot.

A few years ago building a simple EFP32 project and connecting with the Wi -Fi was enough to impress people.

But now companies expect much more.

Modern IoT system involves embedded firmware, art of networking, aged processing, cloud infrastructure, and real -time debugging.

So in this video, I will give you a practical roadmap.

This is not a beginner motivational roadmap.

This is the same skill that is actually used in the IoT and embedded system field in the industry.

The first thing you need is a strong fundamental for basics of electronics and embedded fee.

Now, Deathboard, and a mobile app.

without understanding the core concept of embedded system and iot

so it starts with gpio sensors relays mospets adc dfe pwm voltage level pull up

and pull down concept power supplies then move to embedded fee

and honestly this is the most important stage because almost every embedded interview focus heavily on pointers,

structures, memory, bit manipulation, volatile keywords, And.. low level logic If you see fundamental for weak advanced firmware development becomes difficult later.

After that, start with microcontroller.

ESP32 is one of the best platforms for learning because it gives you Wi -Fi,

BLE, free art of networking support and enough processing power for advanced project.

The TM32 is also very important

because it is widely used in the industry then start learning communication protocol you can start with UART,

ITUFI, FPI, RS -485 Modbuff

can but don't learn them only theoretical learn how to debug them for example how to identify uart

framing if you would how to analyze FPI timing.

How to debug an I2C buff problem?

How to verify ModBuff CRP packets?

This is where embedded engineering becomes practical instead of tutorial based.

Now comes one of the most important skill for professional firmware development that is RTOF.

Modern embedded systems rarely run on single loop program anymore.

Most real products use as multi -tasking firmware.

Fuller, Taft, Feduler, QH, Famofor, Mutex.

event group software timer IFR -FAP APIs,

but more importantly, understand concept deeply because companies usually test conceptual understanding not only API fintechs.

After RTOF, moving into

networking

and honestly this is where many embedded developers become much more

valuable learn tcp ip basics tcp versus udp dhcp dnf socket communication

and basic network architecture then move into iot protocols you can learn mqtt http httpf webfockets dle gigby and Modbus TCP.

Especially understand MQTT deeply because almost every modern IoT product depends on reliable networking.

Now connect your embedded system with cloud infrastructure.

Learn Node -read.

InfluxDB, Grafana, AWF IoT Core,

you can also learn Microsoft Azure OTA updates remote dashboard telemetry system.

Companies no longer want isolated devices, they want complete ecosystems with remote monitoring,

analytics, firmware updates, halt alerts and escalable device management.

This is where firmware engineering connects with cloud computing or you can see cloud engineering.

If you want to target higher level embedded roles, then embedded Linux becomes very important.

Specifically for industrial gateways, AJI fish tanks a smart controller and advanced IoT devices.

Start with Raspberry Pi or Linux FBCs.

learn Linux commands, processes and riffs, faucets, fail scripting, git, makefiles, serial debugging and tools like GDB.

Linux knowledge significantly increase your opportunity in embedded system.

This is probably most important part of the roadmap.

Do not build only beginner level projects.

Build systems that look like actual product.

For example, industrial IoT gateway.

Smart environment monitoring system energy monitoring devices.

Smart HVIFE controllers, DLE -based monitoring system, is analytics device.

Try to include art of networking, cloud communication, local dev board, modular firmware, fault handling and proper architecture.

Projects are what convert knowledge into engineering experience.

The IoT and embedded industry in 2026 is becoming much more advanced.

Companies are looking for engineers who can debug systems, understand firmware architecture, work with networking,

Integrate hardware and software and solve real -world problems.

So don't focus on only fertilizer or watching tutorial build systems,

debug them, improve them and gradually develop engineering depth.

That deep knowledge is what separates

hobby level development from professional embedded engineering and

if you want more advanced content on embedded system art of fp32 firmware architecture industrial iot

and product development make sure to subscribe to the channel thanks for watching guys

✨ วิดีโอแนะนำ

85 ประโยค

Introduction to RTOS Part 1 - What is a Real-Time Operating System (RTOS)? | Digi-Key Electronics

Business EnglishUniversity StudentsWorking Adults

30 ประโยค

7 Phases of Penetration Testing Explained | Think your system is safe? #cybersecurity #pentesting

Business EnglishUniversity StudentsWorking Adults

176 ประโยค

Every Networking Concept Explained | Networking 101 (2026)

Business EnglishUniversity StudentsWorking Adults

443 ประโยค

Functional-Oriented Documentation in Automation - Eplan & IEC 81346 Explained

Business EnglishUniversity StudentsWorking Adults

41 ประโยค

Making a 360° Controller Smaller than a Penny!

Business EnglishUniversity StudentsWorking Adults

284 ประโยค

How to Become Your Own ISP

Business EnglishUniversity StudentsWorking Adults

40 ประโยค

The Engineering that Runs the Digital World 🛠️⚙️💻 How do CPUs Work?

Business EnglishUniversity StudentsWorking Adults

50 ประโยค

0.0.1 How to become a CAE Engineer CAE | What are the ways to become a CAE Engineer as a fresher

Business EnglishUniversity StudentsWorking Adults

106 ประโยค

A Career in IT

Business EnglishUniversity StudentsWorking Adults

เทคนิค Shadowing คืออะไร?

Shadowing เป็นเทคนิคการเรียนรู้ภาษาที่ได้รับการรับรองทางวิทยาศาสตร์ พัฒนาขึ้นสำหรับการฝึกนักแปลมืออาชีพ วิธีการนี้เรียบง่ายแต่ทรงพลัง: คุณฟังเสียงภาษาอังกฤษจากเจ้าของภาษาและพูดตามทันที — เหมือนเงาที่ตามผู้พูดด้วยช่วงเวลาห่าง 1-2 วินาที การวิจัยแสดงว่าเทคนิคนี้ปรับปรุงความแม่นยำในการออกเสียง ทำนองเสียง จังหวะ การเชื่อมเสียง การฟังเข้าใจ และความคล่องแคล่วในการพูดได้อย่างมีนัยสำคัญ

เทคนิค shadowing: อ่านคู่มือฉบับเต็มทีละขั้นตอน →

ฝึกพูดภาษาอังกฤษด้วยเทคนิค Shadowing จากวิดีโอ: The Ultimate IoT Roadmap in 2026? | Embedded Systems & IoT Career Roadmap

Is Embedded Systems Still a Good Career in 2026?

Internet of Things (IoT) Explained in 3 minutes

Complete Roadmap for Backend Software Engineers (START HERE!)

Introduction to RTOS Part 1 - What is a Real-Time Operating System (RTOS)? | Digi-Key Electronics

7 Phases of Penetration Testing Explained | Think your system is safe? #cybersecurity #pentesting

Every Networking Concept Explained | Networking 101 (2026)

Functional-Oriented Documentation in Automation - Eplan & IEC 81346 Explained

Making a 360° Controller Smaller than a Penny!

How to Become Your Own ISP

The Engineering that Runs the Digital World 🛠️⚙️💻 How do CPUs Work?

0.0.1 How to become a CAE Engineer CAE | What are the ways to become a CAE Engineer as a fresher

A Career in IT

เกี่ยวกับบทเรียนนี้

คำศัพท์และวลีสำคัญ

เคล็ดลับการฝึกพูด

เทคนิค Shadowing คืออะไร?