تدريب Shadowing: I Built a Fully Autonomous Flying Umbrella - تعلم التحدث بالإنجليزية عبر الفيديو

اختر وضع التدريب

كل وضع يفتح غرفة تدريب بملء الشاشة.

212 جمل

إذا كانت الجمل قصيرة أو طويلة جدًا، انقر على Edit لتعديلها.

This is the flying umbrella and today we're going to make it follow me around.

This is version 2 of my flying umbrella project.

Version 1 was built all the way back in...

2024. I basically just slapped some propellers onto an umbrella and it somehow managed to fly.

Except, as thousands of you guys pointed out, it doesn't follow you.

What if you made the drone follow you instead of using a controller?

Make the umbrella follow you.

Keen to see you follow you automatically.

So today, we're finally going to make things right.

Unfortunately, the current state of the old umbrella is, well...

So we're gonna redesign everything.

More reliable, more convenient, and most importantly, fully autonomous.

I mean, what could go wrong?

If you're wondering what this is, let me explain my plan.

Before we build the upgraded flying umbrella, we need a tracking system that can follow a person.

This can be done with a camera mounted under the umbrella, a depth sensor or lidar, a GPS, or even overseas teleoperators.

No matter which method we use, it's going to take a lot of testing.

Doing all that testing on a giant frame like the umbrella would be a nightmare.

So instead, I'm building this smaller, normal-looking drone to use as a testing platform.

There was no reason to design a custom drone just for testing, so I reached out to Hollibro and they sent me this frame.

To control and stabilize the drone, they also sent me this professional-grade flight controller.

After plugging in the motors, GPS, and receiver, I was ready to start setting up the flight software.

Apparently, it's super easy and should only take a few hours.

It's currently day 16, and that took way longer than it should have.

Although I did run into a few issues here and there, such as these misleading diagrams, the main reason it took so long is because I procrastinated.

Hopefully this doesn't happen again for the rest of the project.

Okay, great.

Now we have a reliable testing drone, but in order for it to autonomously follow a person around, we're going to need a few more components. So...

This is a camera module, and this is another flight controller.

But this time, we have a slot inside for a Raspberry Pi.

The Raspberry Pi's job is to process the camera footage and pinpoint where my head is in real time.

Then, it tells the flight controller to fly the drone towards this point so that it constantly stays centered.

This should be pretty simple, but I only have two weeks to work on this project before school starts, so we're going to get some help.

This is Hinson.

He studies computer science at a relatively small university called Stanford, and he's one of the most cracked programmers I know.

While Hinson starts working on the tracking code, I'll go and start building the actual umbrella.

Now, to make an umbrella fly, you need to put propellers on the sides.

But the only solid enough mounting point is the middle rod.

Yeah, do you have a solution?

Yeah, what if we just connected the four propellers to the center using some sort of big frame?

Well, we actually tried that last time, but the giant frame was just way too cumbersome and annoying to bring around.

Hmm, I guess you are right.

if only if they're...

Wait a second.

What if we did folding arms?

I feel like this mechanism shouldn't be that hard to recreate.

Let's make a quick test model as a proof of concept.

Nice.

We also need the arms to lock firmly into place upon opening, but it seems like this mechanism has way too much wiggle room.

But then I realized by simply changing the axes of rotation, for this locking plate, we get rid of this problem completely.

After a lot more designing, printing, and testing, I was able to come up with this design.

Now let's just put four of them together and create our internal frame.

If you're wondering how I'm able to use CAD directly in my browser, it's because I'm using Onshape.

You can try it out six months for free using the link in my description.

Okay, so here's the final design.

We have the central hub that attaches to the umbrella, the locking mechanisms, the hinges, and these arms that we can simply reuse from last time,

although I first had to re-solder some of the wires and add some better ESCs.

Let's get the rest of these parts 3D printed.

Oh shi- At the start of this project,

I was using my BambooLab X1C, but recently, BambooLab sent me their new H2D.

These hinges were designed to be printed out of carbon fiber nylon for maximum strength, but doing so used to be a huge pain.

On the H2D, however, you can simply dry the filament in the AMSHT, and printing is as easy as pressing a button and watching it go.

Thanks to its fully heated chamber and advanced filter, tough engineering filmments like CF Nylon now print without any warping or smell.

The quality of these prints is literally mind-blowing.

If I had this earlier, this project would have been so much easier.

The central hub-wee design looks very cool, but with all these gaps in weird geometries, it required a ton of supports, which left rough surfaces upon removal.

But the H2D has two nozzles that can swap within just a few seconds.

This means you can print in multiple materials and in our case use support filament with minimal changes to print time.

For advanced engineering projects, the H2D is one of the best 3D printers you can get.

But if you're just getting started, Bamboo Lab has options for every budget and skill level.

To learn more, check out the link in the description.

Thank you Bamboo Lab for supporting my projects and sponsoring this video.

These supports remove so much cleaner than the previous ones.

Now let's assemble everything.

Originally I wanted to attach the umbrella to the frame permanently and create some sort of fancy collapsing mechanism, but we're just gonna friction fit it because I got too lazy.

This rod sticks out a bit too much, so let's cut that off.

Somehow the umbrella still works normally?

Let's finish assembling the frame.

All these little locking mechanisms are also printed with CF nylon and slid into place.

And now we can just lock them in with some screws.

Then I had to add 16 more small screws to attach rubber bands.

I couldn't fit my screwdriver in the small gap, so I had to use this Allen wrench over and over which took forever.

But now we can finally start attaching the arms and of course do some great cable management.

Now, when we fold the arm outwards, we can watch the rubber bands engage the mechanism and lock the arm in place.

Nice.

Isn't that actually crazy?

And now it's like the size of a tripod.

And I just go boom, boom, boom.

How did I even make this?

Just like the testing drone, let's add the GPS, the flight controller, the receiver, and other various electronics.

And now, we're ready for our first test flight.

Okay, flight test one.

Would the complex folding arms hold up, or would they cause too many vibrations for the flight controller?

We were about to find out.

No clue if this will work, first flight.

It seemed like the propellers were spinning the wrong way, but since I had my laptop, I was able to quickly reverse the motor directions and...

The drone was still pushing itself into the ground, so I did a bit of troubleshooting and turns out...

I can't reverse them in software.

Let's just do this tomorrow, it's too dark anyways.

100

Okay.

101

Wow, it's tomorrow ready?

102

That was fast.

103

I actually had to rewire and resolder all the motors at 12am which took forever but now… it finally…

104

Maybe it's just a fluke, let's try that again.

105

After a bit of troubleshooting, I was able to fix the problem and now… It was a bit shaky at first,

106

but after using the GPS to set up a position hold, I was able to get this.

107

And just for the fun of it, I decided to try attaching the umbrella as well.

108

But let's save the full reveal for when the autonomous tracking feature is done.

109

Speaking of that, the camera we chose earlier requires a custom tracking code and doesn't work if it's too dark.

110

So instead, we're going to use… Wait John, hear me at… This isn't your ordinary camera.

111

This is a time of flight camera and it sees in depth.

112

Unlike a normal camera that captures light, this one emits light.

113

Let's imagine the simplest scenario, trying to detect the distance to that wall.

114

The top camera emits a single wave of light, which bounces off the wall and comes back.

115

Now if you look closely, the returning light looks almost the same as what was sent out, just slightly shifted.

116

This is called the phase shift, and by measuring it, the camera can directly calculate the distance.

117

Isn't that just LiDAR?

118

You might be thinking, isn't that just lighter?

119

Most lighter use direct time of flight, which times how long a light pulse takes to return, which works great for these large buildings.

120

But at short distances, those nanosecond differences become super hard to measure.

121

By using an indirect time of flight camera, we measure how long the light shifts, which works better for short distances and allows the camera to be much more compact.

122

But what if you're aiming at something that isn't just a flat wall?

123

Well, instead of sending a single beam of light, the camera sends light in all directions.

124

Since the distance is directly proportional to the phase shift, we get this beautiful depth picture.

125

Wow, that's pretty cool.

126

Now, in theory, using this camera is a pretty good choice, but in reality...

127

Really, what does this even mean?

128

We got an ArduCam Uncone error.

129

Oh, would you look at that?

130

There's absolutely no description of what an Uncone error is.

131

By some miraculous miracle, and by downloading a bunch of firmware that we probably weren't supposed to, even the time-of-flight camera was now starting to work,

132

and the tracking code was coming along together as well.

133

Now, it was only a matter of integrating everything together.

134

That's not supposed to happen.

135

Okay, so we had just got the top camera working, and I decided to hold it high up above my head to test it out.

136

But as I was bringing my hand up, it disconnected.

137

And from that moment on, this board just refused to reconnect.

138

No matter who we asked, no matter what we tried, this thing was just completely bricked.

139

Is it the Raspberry Pi that's broken?

140

Or maybe it's the carrier board?

141

Or maybe it's the flight controller?

142

Or maybe the cable broke?

143

Or maybe my laptop isn't working?

144

After a lot of troubleshooting, we determined it was probably the Raspberry Pi.

145

But even if we were correct, with only 6 days left and the 4 day shipping time, we were cutting it really close.

146

While waiting for the Raspberry Pi to arrive, I took the Bear Frame out for a few more test flights to perform some PID tuning

147

so that it could fly more smoothly.

148

But as the days passed, I couldn't stop worrying about how this project would turn out.

149

Dude, that's horrendous.

150

Yeah?

151

I think I watched the video.

152

Wait, actually?

153

Yeah, that was different.

154

I guess that's our project number two.

155

Little did he know, this alleged project number two was on the brink of collapse.

156

If this doesn't work, the project is officially over.

157

Thank you guys.

158

In three, two, one.

159

Oh my god.

160

Uh, well it did something different.

161

Oh my god.

162

I'm pretty sure.

163

Wait, I think it worked.

164

It did not work.

165

No water, no water.

166

And just like

167

that, the project was officially over.

168

I mean, we both had to go to school and we just couldn't afford to dedicate any more time.

169

But no matter how busy I got, I just couldn't stop thinking about the project.

170

So, one day, I decided to give things another go.

171

This time we're replacing every single component with a brand new one, so there should be no way anything fails to connect again.

172

Let's go, it finally works again!

173

Everything was going well at first, but when I tried to connect the only component I didn't replace, the time of flight camera, that didn't work.

174

So I decided to scrap everything and try using a GPS system instead.

175

So now this looks like a bop- It actually worked pretty well, but the GPS was only accurate to about 3 meters,

176

and getting one with enough precision would cost thousands of dollars.

177

It's just like, not that good.

178

So once again, I gave up.

179

It wasn't until half a year later that I decided to give this thing one final try.

180

This time, I decided to bite the bullet and buy another top camera.

181

Oh yeah, and Hinson's back from school for the summer nap.

182

Maybe the real flying umbrella was just the friends we made along the way.

183

Despite a lot more trial and error and a lot more struggles.

184

30 clips of me walking into this field, and then 30 more clips of me walking back with absolutely zero results.

185

Eventually, we got to the point where we were finally able

186

to move from the testing drone to the full-on umbrella and test this thing out.

187

As I started transferring all the tracking hardware from the tracking drone to the umbrella, I honestly had no idea what to expect.

188

What was supposed to be a simple project ended up coming with so many unexpected and unlucky moments.

189

In fact, I barely scratched the surface of what we went through.

190

You can pause here for the full list.

191

Yet somehow, we managed to push through, and tonight, an entire 358 days since the start of this project,

192

we were now attempting to bring to life an idea that had first stemmed three years ago.

193

If this still didn't work, I honestly didn't know what I was going to do.

194

But sometimes you just need to ignore all the doubts in your mind and go for it.

195

Even as it started getting darker, we just couldn't stop playing with this thing.

196

Sir, this is what a flying umbrella is in 2025.

197

Who wants to hold that TV?

198

Let's go!

199

Now, I would be lying if I said that this project turned out perfect.

200

But at the same time, I would also be lying to say that this moment didn't bring us joy.

201

I mean, just look at it.

202

It's like a dream.

203

A literal floating umbrella.

204

Just dancing in the air.

205

I've been a perfectionist my entire life.

206

When we started this project, every single detail mattered.

207

So when things went wrong or weren't perfect, it always felt crushing.

208

But over the past year, I've learned that you can't let perfectionism stop you from finishing.

209

Sometimes, it's not about making something perfect.

210

It's about making it real.

211

And once it was finally real, there was only one thing left to test.

212

That's right, this thing even works in heavy rain.

تنزيل التطبيق

كل ما تحتاجه للتحدث بطلاقة

تقييم النطق بالذكاء الاصطناعيتقييم كل جملة

تدريب IPAأتقن كل صوت

المفرداتابنِ رصيدك من الكلمات

لعبة المفرداتتعلّم أثناء اللعب

امسح رمز QR

Download on theApp Store Get it onGoogle Play

FOR YOU

فيديو موصى به

251 جمل

My Tesla Powered Boat Gets MAJOR Upgrades

Business EnglishUniversity StudentsWorking Adults

190 جمل

This 25-Year-Old Built a 2-Year Moat Nobody Can Bet Against | Corgi, Nico Laqua & Emily Yuan

Business EnglishUniversity StudentsWorking Adults

102 جمل

المفردات وملاحظات التحدث لهذا الدرس

يحتوي هذا الفيديو على 212 جملة و2601 كلمة للتدرب على الترديد. مدة الكلام 17:32. يتكلم المتحدث بسرعة ثابتة، نحو 148 كلمة في الدقيقة، وهي سرعة مريحة للترديد. 82% من الكلمات ضمن أكثر 3,000 كلمة شيوعًا في الإنجليزية، ويُستحسن مراجعة الباقي قبل البدء.

أهم المفردات في هذا الفيديو

15 كلمة أقل شيوعًا من الفيديو، مع النطق والمعنى:

umbrella /ʌmˈbɹɛl.ə/ (اسم) — مِظَلَّة, شَمْسِيَّة. A cloth-covered frame used for protection against rain or sun.
drone /dɹoʊn/ (اسم) — يَعْسُوب, يَمْخُور. A male hymenopteran (ant, bee, hornet, or wasp), whose sole primary function is to mate with the queen.
mechanism /ˈmɛk.ə.nɪ.zəm/ (اسم) — آلِيَّة. Any mechanical means for the conversion or control of motion, or the transmission or control of power.
attach /əˈtæt͡ʃ/ (فعل) — رَبَطَ. To fasten, to join to (literally and figuratively).
component /kəmˈpoʊ.nənt/ (اسم) — مُكَوِّن, جُزْء. A smaller, self-contained part of a larger entity. Often refers to a manufactured object that is part of a larger device.
fold /ˈfəʊld/ (فعل) — طَوَى. To bend (any thin material, such as paper) over so that it comes in contact with itself.
mount /maʊnt/ (فعل) — رَكِبَ. To get upon; to ascend; to climb.
custom /ˈkʌstəm/ (اسم) — عَادَة, عُرْف. Frequent repetition of the same behavior; way of behavior common to many; ordinary manner; habitual practice; method of doing, living or behaving.
connect /kəˈnɛkt/ (فعل) — رَبَطَ. To join (to another object): to attach, or to be intended to attach or capable of attaching, to another object.
reliable /ɹɪˈlaɪəbl̩/ (صفة) — مَوْثُوق. Suitable or fit to be relied on; worthy of dependence, reliance or trust; dependable, trustworthy
clip /klɪp/ (اسم) — مِشْبَك. Something which clips or grasps; a device for attaching one object to another.
laptop /ˈlæp.tɑp/ (اسم) — كَمْبْيُوتِر مَحْمُول, حَاسُوب مَحْمُول. A laptop computer.
rubber /ˈɹʌbɚ/ (اسم) — مَطَّاط. Pliable material derived from the sap of the rubber tree; a hydrocarbon biopolymer of isoprene.
collapse /kəˈlæps/ (فعل) — اِنْهَار. To break apart and fall down suddenly; to cave in.
receiver /ɹəˈsi.vɚ/ (اسم) — مُسْتَلِم, مُسْتَلِمَة. A person who receives something in a general sense; a recipient.

الأفعال المركبة التي ستسمعها

look at (فعل) — نَظَرَ. To observe or watch.
come back (فعل) — عَادَ, رَجَعَ. To return to a place.
come up with (فعل) — جَاءَ بِـ, أَتَى بِـ. To manage to produce, deliver, or present (something) by inventing, creating, thinking of, or obtaining it.
give up (فعل) — تَنَازَلَ, تَخَلَّى. To surrender (someone or something); to inform on (someone).
point out (فعل) — أَشَارَ. To identify among a group of similar subjects, or in a scene where the subject might not be readily seen or noticed, with a gesture of the body.

نطق يحتاج إلى انتباه

يستخدم المتحدث 49 من الصيغ المختصرة، مثل we're, isn't, couldn't. انطقها بصيغتها القصيرة كما تسمعها.

أصوات “sh” و“zh”: capture /ˈkæp.(t)ʃɚ/, crush /kɹʌʃ/, rotation /ɹoʊˈteɪʃən/, precision /pɹɪˈsɪʒ.ən/, friction /ˈfɹɪkʃən/
الكلمات الطويلة — انتبه لموضع النبر: mechanism /ˈmɛk.ə.nɪ.zəm/, autonomous /ɔˈtɑnəməs/, ordinary /ˈɔɹdɪnɛɹi/, unexpected /ʌnɪkˈspɛktɪd/, electronics /ɪˌlɛkˈtɹɑ.nɪks/

كيف تتدرب بهذا الفيديو

استمع إلى الفيديو كاملًا مرة واحدة دون أن تتكلم، ودوّن الكلمات التي لا تعرفها.
ردّد جملة جملة بالسرعة العادية، وكرّر كل جملة حتى يتطابق إيقاعك مع المتحدث.
سجّل صوتك وقارنه بالأصل، مع الانتباه إلى كلمات مثل umbrella, drone, mechanism.

القواعد في هذا الفيديو

أكثر التراكيب التي يستخدمها المتحدث، مع العبارات نفسها من الفيديو:

التركيب	في الفيديو
المبني للمجهول be + اسم المفعول — التركيز على ما يحدث لا على من يفعله	was built · can be done · were designed
المضارع التام have/has + اسم المفعول — حدث ماضٍ ما زال له أثر الآن	I've been · I've learned

ما هي تقنية التظليل الصوتي؟

التظليل الصوتي (Shadowing) تقنية تعلم لغة مدعومة علمياً، طُورت أصلاً لتدريب المترجمين الفوريين المحترفين. الطريقة بسيطة لكنها قوية: تستمع لصوت إنجليزي أصلي وتكرره فوراً بصوت عالٍ — كظل يتبع المتحدث بتأخير 1-2 ثانية. تُظهر الأبحاث تحسناً كبيراً في دقة النطق والتنغيم والإيقاع وربط الأصوات والاستماع والطلاقة.

تقنية الشادوينغ: اقرأ الدليل الكامل خطوة بخطوة →

تدريب Shadowing: I Built a Fully Autonomous Flying Umbrella - تعلم التحدث بالإنجليزية عبر الفيديو

اختر وضع التدريب

تنزيل التطبيق

My Tesla Powered Boat Gets MAJOR Upgrades

This 25-Year-Old Built a 2-Year Moat Nobody Can Bet Against | Corgi, Nico Laqua & Emily Yuan

How To: Make Your FIRST Travel Video (3 Easy Steps!)

Leonardo da Vinci’s GENIUS Inventions

Introducing GPT-6 Astra: the most intelligent and aligned model in the world.

Should You Build Your Own Keyboard?

Flying Phone Scam Exposed (so I built a REAL one)

Flying a plane badly, on purpose.

Is it time to dismantle the puzzle?

I Go To The Cloud.

Launch Pads and Prep at Starbase (and Beyond) - Starship Summary

I spent 3 days at MIT... the robot hype is worse than you think