Shadowing Practice: Newton's second law | Middle school physics | Khan Academy - Learn English Speaking with Video
Creando lección...
1
According to Newton's first law, if the net force acting on an object is zero, the object's motion will not change.
2
This means, for example, if an object is at rest on a table
3
or say somewhere in intergalactic space where the net force is zero, then the object will continue to be at rest.
4
On the other hand, if the object was moving, and again, if the net force on it was zero, then it will continue to move with that exact same velocity forever.
5
But now, here's a question.
6
What if the net force acting on an object is not zero?
7
Well, then the object's motion will change.
8
So a net force will change the object's motion.
9
In other words, a net force causes acceleration.
10
But how exactly are they connected?
11
That's what we're going to find out in this video.
12
So let's begin.
13
So how do we do this?
14
Well, we take a bunch of masses, apply a net force and measure that, and then measure how much acceleration they get because of the net force.
15
and then if we do enough trials maybe we can see a pattern
16
and maybe we can see the connection between them
17
but of course the big question is how do we measure net force acting on an object
18
and how do we measure the acceleration of it well let's look at it one by one
19
so first of all how do we measure a net force well a cool equipment
20
that we can use to measure forces is a spring balance
21
and the way the spring balance works is
22
that there's a spring over here so if you pull on it say from this side, then the spring is compressed and therefore it pulls back.
23
And the number, the reading over here tells you exactly with how much force the spring is pulling back on you.
24
So in this example, the spring is pulling on my hand with a force of exactly two Newtons.
25
If you had pushed it from this end, then the spring is pushing with a force of exactly two Newtons.
26
And now since I know with exactly how much force it is pushing, I can use this to push on our objects
27
and look i will now know exactly with what force we are pushing on the object pretty cool isn't it
28
but wait a second
29
that is only one force remember our goal is to figure out the net force how do we do
30
that how do we figure out how much net force is acting on an object well let's see
31
if you were to keep these objects on a table then there are forces in the vertical like gravity
32
and normal force but they get balanced they are balanced isn't it
33
so we don't have to worry about those forces we only have to worry about the forces in the horizontal.
34
So one of the forces in the horizontal is our spring force, which we know.
35
But what about the other forces?
36
The other forces are the force of friction and air resistance.
37
We can minimize friction drastically by using an air hockey table, right?
38
And if the velocities are not too high, then even the air resistance is very minimal.
39
So look, in the horizontal, there's only one effective force, and that is the spring force.
40
So that itself becomes the net force.
41
Amazing, right?
42
Okay, so that's how we can measure the net force.
43
What about the acceleration?
44
How do we measure that?
45
Well, for that, we can use a motion sensor, which will periodically monitor the velocity, and it will give you a velocity time graph.
46
And by analyzing the graph, we can measure the acceleration.
47
Okay, so with that, we have everything needed.
48
We can go ahead and plan our experiment.
49
But how do we do that?
50
Well, one of the best ways to do that is to think about the variables involved.
51
So what are the variables involved over here?
52
Well, we have the net force, Since this is the variable that we can change independently, we call this the independent variable.
53
Then of course there is the acceleration that we're going to measure.
54
This acceleration is dependent on the net force, right?
55
So we call this the dependent variable.
56
So now for our experiment, we can push this object with different net forces.
57
Say we'll do three trials.
58
And then for each of them, we'll figure out what the acceleration is.
59
And by measuring the acceleration, maybe we can make a connection between the net force and the acceleration, isn't it?
60
Okay, that sounds like a plan, but there's another variable over here, the mass.
61
What do we do about that?
62
Should we also change that?
63
Well, here's an important thing about doing experiments.
64
You should always change just one variable at a time.
65
Since we're already changing the net force, this particular variable, we want to make sure the mass is a constant.
66
So we're going to use the same value of the mass everywhere.
67
And therefore, we call this the control variable because we're not changing that.
68
It's going to be a constant.
69
So what mass can we use?
70
Well, we can use any one.
71
Let's just use 1 kilogram mass.
72
So we now have our plan.
73
We're going to push the 1 kilogram object with different forces, and we're going to measure what the acceleration is going to be.
74
All right, so we start by pushing with 2 newtons of force on a 1 kilogram object, and once we let go of this, the object will start accelerating,
75
and we will also keep that contact for about a second.
76
So we'll put the force for about a second.
77
We'll try to make sure that this stays at two newtons, so the force is a constant, okay?
78
So let's do that.
79
And there we have it.
80
Once we let go of the contact, the object stops accelerating, and it continues to move in the straight line with the constant velocity.
81
So let's look at what our motion sensor has detected, and let's see what the velocity time graph looks like.
82
There we have it.
83
Let's see if that graph makes sense.
84
For the first one second, the object was accelerating because there was a net force acting on it, and you can see the velocity is increasing.
85
After the one second, the contact is lost and the object moves with the constant velocity and that's why look, the velocity stays put.
86
But how much is the acceleration?
87
We have to look at this.
88
And you can see the object's velocity increased from zero to two meters per second in one second.
89
So that is the acceleration, zero to two meters per second in one second.
90
All right, we're gonna do second trial, But this time we're gonna put four newtons of force.
91
And again, we'll push it for about one second and let it go.
92
All right, here we go.
93
Boom.
94
What do we notice?
95
Well, we notice that the object traveled much faster.
96
So let's see what the velocity time graph looks like.
97
What does our motion sensor give us?
98
Now the velocity time graph looks like this.
99
Ooh, what is it saying?
100
Well, it's saying now in the first second while the object was accelerating, when the net force was acting,
101
the velocity increased from zero to four meters per second.
102
And then the object continues to move with a constant velocity of four meters per second because the contact was lost.
103
So now the acceleration is zero to four meters per second in one second.
104
The acceleration became higher when the net force became higher.
105
Does this make intuitive sense?
106
I think yes.
107
It makes intuitive sense that when you apply a larger net force, the object accelerates larger.
108
And we are also experimentally seeing that.
109
That's amazing.
110
Okay, if we did one more trial, we get very similar results.
111
And this time, our motion sensor gives us something like this.
112
And notice, we get even higher acceleration.
113
This time the acceleration is, in one second, it goes from zero to five meters per second.
114
So the acceleration has further increased.
115
So what is the connection that we see?
116
We see for a higher net force, more than net force, more is the acceleration provided the mass stays the constant.
117
We should always be careful about the control variable that we have used.
118
Amazing, isn't it?
119
But now this brings up the last question.
120
What if you want to vary the mass?
121
We want to see the effect of what happens when the mass changes.
122
Well, we should always make sure only one variable is changing.
123
So if you want to vary the mass, we have to keep this variable the same.
124
So we'll repeat this experiment.
125
This time we'll keep the net force the same.
126
Let's keep the net force, say, 4 newtons.
127
And let's vary the mass.
128
Let's make the mass 1 kilogram.
129
Then let's repeat the experiment with 2 kilograms and maybe with 4 kilograms.
130
All right, first up, we'll put 4 newtons for 1 kilogram.
131
We actually already did this, but let's do it one more time.
132
We'll push it for one second, let it go.
133
And what does the motion sensor give us?
134
Well, it gives us an acceleration of zero to four meters per second in one second.
135
Okay, let's repeat this.
136
Four newtons, but this time for two kilogram object.
137
So again, push it for about a second, let it go.
138
What does the motion sensor give us?
139
The acceleration is smaller.
140
Can you see that?
141
It went from zero to two meters per second in one second.
142
Does that make sense?
143
I think yes.
144
I mean, if you were to push a heavier object with the same force, you intuitively expect it to accelerate lesser.
145
And that's exactly what we get.
146
So as the mass increased, the acceleration reduced.
147
So let's do one last trial.
148
This time the mass is 4 kilograms.
149
Again, we push it with the same force, 4 newtons for about a second.
150
We can already see the acceleration was much lower.
151
What does the motion sensor give us?
152
Well, it gives us much lower acceleration.
153
This time, it went from 0 to 1 meters per second in one second.
154
So what do we notice?
155
We notice that for a given force, if the net force is the same, if the mass increases, the acceleration reduces.
156
So more mass gives you less acceleration for the exact same net force.
157
This is the essence of what we call the Newton's Second Law.
158
Of course we could be more quantitative, but I think this captures the essence beautifully.
159
Newton's second law is one of the most important laws in physics
160
because it allows us to predict the motion provided we know the net force acting on the object.
📺 Mismo canal
B16
LearnStorm Growth Mindset: How to write a SMART goal
American AccentBusiness EnglishHigh School StudentsUniversity Students
C115
Introduction to high school physics | Khan Academy
American AccentHigh School StudentsUniversity Students
B19
States of matter | Middle school chemistry | Khan Academy
American AccentTOEFL PrepCambridge Exam PrepHigh School Students
B12
Elements | Middle school chemistry | Khan Academy
American AccentHigh School StudentsUniversity Students
C13
Derivative as slope of a tangent line | Taking derivatives | Differential Calculus | Khan Academy
American AccentCambridge Exam PrepUniversity StudentsWorking Adults
C15
Molecules, crystals, and diatomic elements | Middle school chemistry | Khan Academy
American AccentHigh School StudentsUniversity Students
B13
Atoms | Middle school chemistry | Khan Academy
American AccentTOEFL PrepCambridge Exam PrepHigh School Students
C13
Pixar in a Box | Welcome to Pixar in a Box | Khan Academy
American AccentHigh School StudentsUniversity Students
C14
Proportional reasoning with motion | AP Physics | Khan Academy
American AccentBusiness EnglishUniversity StudentsWorking Adults
C12
Biology overview
American AccentUniversity Students
C12
Newton, Leibniz, and Usain Bolt | Derivatives introduction | AP Calculus AB | Khan Academy
American AccentCambridge Exam PrepUniversity StudentsWorking Adults
B12
Introduction to interest | Interest and debt | Finance & Capital Markets | Khan Academy
American AccentBusiness EnglishUniversity StudentsWorking Adults
B2How to rationalize a denominator | Exponent expressions and equations | Algebra I | Khan Academy
Daily ConversationHigh School Students
✨ Recomendar Video
B13
9 oraciones
Walter Lewin explains Newton's third law
Daily ConversationHigh School StudentsUniversity Students
B114
10 oraciones
Gravity – In a Minute
High School StudentsUniversity Students
B15
25 oraciones
Friction – The Force That Opposes Motion
IELTS PrepTOEFL PrepHigh School Students
B238 oraciones
Extras ArcLength YouTube
American AccentHigh School StudentsUniversity Students
B19
48 oraciones
Bài 3 - Trang Phục Đi Học
Business EnglishDaily ConversationHigh School Students
B24
444 oraciones
I Built a Roller Coaster In My Lab
American AccentTeensDaily ConversationHigh School Students
B21
199 oraciones
How to memorize so easily it feels ILLEGAL
Daily ConversationHigh School StudentsUniversity Students
B21
425 oraciones
NEW- Micro Unit 1 Summary- Basic Economic Concepts
Daily ConversationHigh School StudentsUniversity Students
B12
249 oraciones
How To Train Like An F1 Driver With McLaren's Oscar Piastri!
TeensDaily ConversationHigh School Students
B11
92 oraciones
What's an if statement? 🤔
Business EnglishHigh School StudentsUniversity Students
Vocabulario y notas de pronunciación para esta lección
Esta lección de conversación de nivel B1 se basa en el vídeo “Newton's second law”. Las palabras que más se repiten: force, net, acceleration, object, mass. Este vídeo tiene 160 frases y 1821 palabras para practicar shadowing. La parte hablada dura 9:14. El hablante habla rápido, unas 197 palabras por minuto, así que espera sonidos enlazados y reducidos. El 88 % de las palabras está entre las 3.000 más comunes del inglés, por lo que el vocabulario es fácil de seguir. 30 de sus 160 frases son preguntas, así que sirve para practicar la entonación de las preguntas y las respuestas cortas.
Vocabulario clave de este vídeo
Las 15 palabras más avanzadas del vídeo, con su pronunciación y significado:
| Palabra | Pronunciación | Significado |
|---|---|---|
| acceleration sustantivo | /əkˌsɛl.əˈɹeɪ.ʃən/ | aceleración, aceleramiento |
| velocity sustantivo | /vəˈlɑsəti/ | velocidad |
| variable adjetivo | [ˈvæɹ.i.ə.bl̩] | variable |
| kilogram sustantivo | /ˈkɪləɡɹæm/ | kilogramo, quilogramo |
| newton sustantivo | /ˈn(j)uːtən/ | newton |
| meter sustantivo | /ˈmitəɹ/ | medidor, contador |
| sensor sustantivo | /ˈsɛn.sɚ/ | sensor |
| accelerate verbo | /ɪkˈsɛl.əˌɹeɪt/ | acelerar, embalar |
| graph sustantivo | /ɡɹæf/ | gráfico, gráfica |
| horizontal adjetivo | /ˌhoɹəˈzɑn.təl/ | horizontal |
| vary verbo | /ˈvɛəɹi/ | variar |
| intuitive adjetivo | /ɪnˈtjuːɪtɪv/ | intuitivo |
| friction sustantivo | /ˈfɹɪkʃən/ | fricción |
| essence sustantivo | /ˈɛsəns/ | esencia |
| dependent adjetivo | /dɪˈpɛndənt/ | dependiente |
Phrasal verbs que vas a escuchar
| Palabra | Pronunciación | Significado |
|---|---|---|
| figure out verbo | averiguar, captar | |
| bring up verbo | levantar, alzar | |
| go ahead verbo | /ˌɡoʊ əˈhɛd/ | venga, adelante |
Frases que vale la pena repetir
Frases cortas y completas del vídeo que puedes reutilizar en la conversación diaria:
- How do we measure that?
- What do we do about that?
- Should we also change that?
- What does our motion sensor give us?
- What if you want to vary the mass?
Gramática en este vídeo
Las estructuras que más usa el hablante, con las palabras exactas del vídeo:
| Estructura | En el vídeo |
|---|---|
| Voz pasiva be + participio pasado — importa lo que ocurre, no quién lo hace | is compressed · are balanced · is lost |
| Consejo con “should” should + verbo — decir qué es buena idea | Should we also change · should always change · should always be |
| Past continuous was/were + -ing — una acción en curso en un momento del pasado | was moving · was accelerating |
| Superlativos the -est / the most … — lo más alto o lo más bajo de un grupo | the best · the most important |
Pronunciación a tener en cuenta
El hablante usa 25 contracciones y formas reducidas, como we'll, we're, isn't. Dilas en su forma corta, tal como las oyes.
- Los sonidos de “sh” y “zh”: acceleration /əkˌsɛl.əˈɹeɪ.ʃən/, friction /ˈfɹɪkʃən/
- Palabras largas — cuida el acento: acceleration /əkˌsɛl.əˈɹeɪ.ʃən/, velocity /vəˈlɑsəti/, accelerate /ɪkˈsɛl.əˌɹeɪt/, horizontal /ˌhoɹəˈzɑn.təl/, intuitive /ɪnˈtjuːɪtɪv/
Sonidos difíciles para hispanohablantes:
- /v/ — no es /b/: los dientes tocan el labio inferior: velocity /vəˈlɑsəti/, variable [ˈvæɹ.i.ə.bl̩], vary /ˈvɛəɹi/, intuitive /ɪnˈtjuːɪtɪv/, quantitative /ˈkwɑn.təˌteɪ.tɪv/
- /z/ — sonora, no /s/: horizontal /ˌhoɹəˈzɑn.təl/, minimize /ˈmɪn.ɪˌmaɪz/, analyze /ˈæn.əˌlaɪz/
Cómo practicar con este vídeo
- Escucha el vídeo entero una vez sin hablar y anota las palabras que no conoces.
- Empieza a velocidad 0,75×, haz shadowing frase por frase y vuelve a la velocidad normal cuando te resulte fácil.
- Grábate y compara con el original, prestando atención a palabras como acceleration, velocity, variable.
¿Qué es la Técnica de Shadowing?
Shadowing es una técnica de aprendizaje de idiomas respaldada por la ciencia, desarrollada originalmente para la formación de intérpretes profesionales y popularizada por el políglota Dr. Alexander Arguelles. El método es simple pero poderoso: escuchas audio en inglés nativo y lo repites en voz alta de inmediato, como una sombra que sigue al hablante con solo 1-2 segundos de retraso. A diferencia de la escucha pasiva o los ejercicios de gramática, el shadowing obliga a tu cerebro y músculos de la boca a procesar y reproducir simultáneamente patrones de habla reales. Las investigaciones muestran que mejora significativamente la precisión de la pronunciación, la entonación, el ritmo, el habla conectada, la comprensión auditiva y la fluidez al hablar, convirtiéndola en una de las metodologías más efectivas para la preparación del IELTS Speaking y la comunicación en inglés en el mundo real.