शैडोइंग अभ्यास: Using Selection & Scan Processing tools for reverse engineering | Geomagic Design X - वीडियो के साथ अंग्रेजी बोलना सीखें

So for today's webinar, we are going to work on another consumer product.

We're on a roll here with the consumer product, so why not just continue on with the applications?

So today's application is very simplistic, but what I am going to do is focus on some of the selection tools.

So we'll cover those and how to go about doing it.

so we're going to take these skills with design x to

make lives better as you can see here with this screenshot um

and use them to make consumer products manufacturing consumer products better

so we'll go over a little bit about how to use the selection tools

and scan processing tools to get to where we can auto surface this command here on this jacuzzi

so with that we'll go ahead

and jump over to the next slide talking about design x and the workflow and then we'll dive in

the software today i know every week we go over this slide

so i will definitely try to make it brief here

but for anyone that's just joining us that hasn't been on one of the re lab webinars

this slide really just summarizes the workflow for designx and designx was invented to take

scan data from a variety of different sources as you can

see here handhelds arms structured light long -range scanners all these different types handle the heavy lifting of

that type of information which doesn't play well inside of CAD environments.

So we built a platform from the ground up that can take

that information alongside of the CAD tools in one platform to

extract CAD information to then send out the data wherever you want to go, whatever your favorite manufacturing technique is,

whatever one that pertains to what you're trying to do.

So that's the overall workflow workflow for design x

and now let's jump over into our presentation

so for today's webinar we'll go ahead and take this we'll follow the format of processing this into a single scan

so here we have individual scans here and we are going to process it into a single scan

then auto surface it and then from there i also have some

selection tool things

that i would like to cover just breaking down some of those tools as we go along the way

so that's the format for today's is

that we're not going to roll back we're going to do this live

so as you can see i have individual scans over here

on the left hand side The first thing we're going to do is come over to alignment between scan data,

global fine, and go ahead and apply only a small transform.

Use only the reliable data, and we will do the best fit on that.

And you'll see that it will tighten up the alignment there a little bit it.

So now that we have them aligned to each other, as you can see, they look pretty good there.

We will go ahead and do a merge.

So we'll come over to polygons, merge, and let's try HD mesh.

I'm just going to try HD mesh first on this one, just to see how it goes.

since we're doing it live go ahead and run it and see where we where we stand with this

all right so we finished we'll go ahead

and uh we can actually just take those scans

and say move to new group and turn those off and yeah we got a pretty good pretty good merge there.

Let's go ahead and double check.

So right now we have it at 10 million triangles.

We really don't need 10 million triangles for this, so I'm going to drop it down.

Drop it down to like 1 .5. and run the decimate.

Remember the decimate command, we updated it in recent versions, so it's pretty fast now.

So now you see that we decimated it down.

And typically I also will sometimes run what we call a global remesh here.

So run global remesh to just kind of remesh and smooth it out a little bit as we go.

so there we go that looks beautiful now

alright so some of the things I wanted to talk about are some of the selection tools

and we'll go ahead and delete

that group there since we no longer need it on hand

and we can always go ahead

and save it will just say jacuzzi mold 02 this is just good housekeeping go ahead

and save this since we got rid of all that

so you have your selection tools up here right

so you have a line selector one thing that's nice about

line selector by the way is you know i can use it chop areas off

but sometimes if I want to chop this area here you see here

that it has a certain thickness to it well I can hold alt

and click and drag a wider line and I can come

and draw a wider line there if I hold alt

so there's one little tip here like let's say I'm disconnecting this

and I just come down

and use this line tool now i mean there's other ways of doing this

but what i'm doing is showing you sometimes

when you use certain tools there are just some really neat clutch uh aspects to a certain tool

that is just comes in really handy

so really what i'm saying there with the line tool is it just really handy for

if i'm just trying to disconnect something i might come

and do something along those lines like

that where i just use the line tool and again you can hold this alt

and change the thickness of it and you could just come down there like that

and use the line tool

so that's handy rectangle that's the default everybody kind of knows right um circle rarely use it

but kind of nice i guess you know in the right

instance um polygon i i use polygon a lot like i

all i was just talking about using the line right

so polygon i can just do something like this and select long straight areas

really handy there

and of course everybody loves everybody loves the lasso that's what

a lot of people end up using the majority of the time besides rectangle obviously

and you'll notice the one of the most popular techniques to

um using lasso is using the straight side of the lasso right

so if i just click there come over here and come over here and snap a straight line

um so using the straight line of the lasso is really handy there now custom region

we've covered this i believe in here before

but custom region is really neat it's like i'm going to

draw the borders of the country here i'm going to draw the borders all the way around

and then it will select everything inside of it

and it will have this preview until you hit okay

and select and then this is when combined with d feature is really handy right

because then you can just come in and hit d feature

and it will d feature an area

so this custom region tool it's really helpful for just sometimes

100

there's an area like there's twisted triangles inside of it

101

and you're not sure where those triangles go so

102

if you just come over to custom region

103

and you go around it double click for the last accept it and then d feature

104

so the custom and then when it's done you'll notice

105

that it toggles back to whatever else you were using first

106

and of course the paintbrush is actually nice as well too

107

so paintbrush is just really handy sometimes for stuff like this you just come in

108

and you paint it you hold alt to change the size as well

109

and then you can come into something like a d feature

110

and d feature an area i also like paintbrush almost like

111

you use it inside of like adobe products where i will just touch touch touch touch if you're doing photo cleanup

112

and find uh deleting artifacts so then i come over to d feature

113

and you'll notice there that d feature will work on multiple areas at once

114

so i almost use the paintbrush a lot like i do Um, again, like if you're using Lightroom or Photoshop,

115

you can, uh, just touch a bunch of different defects at all at the same time.

116

And of course, paint bucket, amazing.

117

I select the main object, uh, inverse, delete.

118

So now I only have one shell on screen, one polygon object here.

119

And that is, that is one of the best out there.

120

Extend to similar.

121

extended similar will just try to select large low curvature areas i use this a lot for creating regions right

122

so i'll use that but this is very close to these other two

123

and i'll say that i i honestly just jumped to uh the final smart selector um

124

and it select um the second one here select by angle built into the software there is an angle

125

if you go into the preferences

126

so if you come over to file uh preferences

127

and then scroll down here crease angle degree

128

and you can set it's set for three millimeters right now

129

so because that is set already at three degrees i tend to not use

130

that one as much i tend to come over to the smart selector where i click

131

and drag up and what that is ultimately doing when i do

132

that is um adjusting that value right on the fly

133

and then i can hit insert and create a region

134

that way so i tend to use this one the majority of the time

135

that is really just the best one honestly especially

136

if the performance as well like

137

if this is a not a massive uh triangle count then this responds really well you see how fast

138

that is to flood out and

139

if ever you have interior triangles like this what you can

140

do is you can hit insert switch over to rectangle selector click on it you can enlarge it

141

and then shrink it and that will kind of like flood in the interior triangles

142

that are not selected so the same thing goes up here

143

if i click this if i click on the region

144

and i say enlarge and you'll see it fills in

145

and then shrink right back to it just basically does a row of triangles at a time

146

and it will it will automatically clear out those islands that's like one way of doing it

147

is creating that sort of method there so these are the default selection tools

148

but how many of you know there are more selection tools why not more

149

so custom region you see here in here you have um all kinds of different options here

150

but if we come over to mode

151

and you see the ones that we already talked about

152

and then you see some lesser used ones now this is

153

just helpful maybe this is something you want to do maybe this is pointless here

154

but you have box selection mode

155

so box selection i'm just going to align to this view ish there we go

156

and then if i click and then drag like so there i created a selection

157

so it's like a volume selecting mode here and it stays in here by the way so i'm going to

158

click and get out of it and let's go back in here

159

so we'll come back over to select mode box let's get out of it let's just go to this one

160

and then toggle back over to it select mode box Yeah,

161

it's a real fun one.

162

Honestly, I would prefer if it just exited when you're done.

163

Right?

164

So let's go over here to mode again.

165

Cylinder.

166

So I'm going to make a circle.

167

Then I'm going to click where I want it to start and click where I want it to end.

168

So we'll do that again.

169

one more time there we go circle

170

selector cylinder sorry not circles sphere

171

if that's not good enough for you let's do this it's fear is interesting

172

because you can like drag it around there

173

and select the sphere I I would imagine on this data set everybody's like why are you doing this

174

but i think if you have like a really elaborate scan it's got lots of internal geometry

175

and all kinds of crazy stuff

176

that this might end up being handy to select stuff

177

and you see it stays in there by the way unless you hit escape to get out of it

178

so that's what i just did if i come over to mode there it is

179

so those are some of those selection tools now

180

inside of the select you have another often overlooked area by criteria

181

so this criteria tool is interesting you can say I want

182

to select the max edge length smaller than one millimeter let's just do

183

that and we'll hide the regions

184

so select by criteria let's

185

come over to polygons just toggle this off to select

186

There we go. By criteria.

187

Larger than.

188

I honestly use that for long -range data, by the way.

189

If I just say I want to select larger than one millimeter.

190

So it's like, oh, all of it is larger than one millimeter, right?

191

Right now.

192

um and i could mess fiddle with it

193

and try to find out like where it's at

194

if i hit this look it's gonna give me like a general 30 um

195

so let's just change it to 29 i think it should still

196

okay didn't now if we come over to select by criteria you see here that we have other things

197

area smaller than what that's really useful for a lot of times honestly is

198

if I have disconnected you know I use the flood fill

199

and inverse but sometimes it's really handy if I have just use the line there select

200

criteria area smaller than 50.

201

Okay.

202

Larger than you see max midge edge length ratio larger than angle deviation from the plane

203

um so if you have a plane you could say i want to select from angle deviation from that plane

204

crease angle is larger than

205

let's go that's with that there

206

so all of those criteria just to give you a rundown

207

of that's select by criteria you it's just really handy there

208

and those are options that you have so I just wanted to make people aware that those are available for you

209

and they're really helpful if you have an instance where you're just trying to figure something out

210

now i'll go ahead and fill that hole and then let's go ahead

211

and save this because i wanted to show the exterior faces option as well

212

because you do have an option here to say

213

select exterior faces and it will go around and select everything that's on the outside

214

So let's go ahead and save this real quick.

215

And we'll come back to it in a second because this one doesn't really have, as you can see, it's a zero thickness surface.

216

It doesn't have an option.

217

You know, it's not a good model for saying I want to select exterior surfaces.

218

But if I come over and I just drop in a scan here that I have handy, we can do that as well here.

219

So just a second.

220

So here we have a hand.

221

And if I come over to view clip,

222

you see here it's like a shelled hand now honestly for

223

this specific model all you would have to do is go back to one of our other selection tools

224

that we have and select the interior that's kind of freaky

225

and select that and just hit delete

226

but I'm just gonna use this as an example to show the exterior tool

227

so we'll just come over to view we'll just turn it back off here

228

and come over to select just because I'm trying to use what we got here

229

and select the exterior now now if I have that select exterior

230

and I just hit cut and paste it as a new piece

231

so there is the interior offset that again kind of creepy

232

and then there's the exterior so

233

that whole select exterior faces is just awesome it's just really handy

234

so we'll go ahead and jump back to our other model so if i just drag that back in

235

now we have this this model and we'll just kind of use some techniques

236

that we were talking about before sometimes

237

if i want to disconnect this outer wall you know some people do it this way they'll come through

238

and they'll just kind of draw with selection tools like that

239

or you can change the size of it here too and kind of paint that way

240

another method is like we were talking about with the line tool and disconnect it that way holding shift.

241

Another method is using the lasso.

242

Not custom region.

243

I accidentally did that.

244

That's a very common thing that some people do.

245

Right?

246

So I can come in that way.

247

Disconnect it that way.

248

i think a lot of people would like to use that method

249

using the polygon selector tool we got one more area to disconnect it

250

so i'll just stick with polygon here on this one

251

and then double click there and then you see here

252

that we have that external area disconnected

253

so we'll just switch back to rectangle you know flood never mind inverse delete

254

and before we do anything else just run um healing wizard on it

255

and you see there that we just run healing wizard just to fix any areas that may have issues

256

you could always you know if this is still a little bit too

257

rough you know you can come over and and run like something along the lines of enhance shape

258

you know computer enhance you know you just tell it computer enhance and it will do it

259

optimize mesh these are some of the different possibilities you can run

260

so you see that did pretty good turn the regions off

261

And and we're not focused on this today more what I wanted to focus on out of the selection tools

262

So from here also, this is bothering me

263

So let's just come over here and use the smart brush one more time here and enhance Enhance enhance and accept that

264

Now we will come over to the most exciting part where we auto surface and

265

and let it run oh

266

so it's telling us to run the healing wizard one last time

267

because i made changes to it and probably caused a few little tweaks there

268

so now i have that i can come over to exact surfacing hit okay and we now will auto surface

269

so there is our auto surface

270

turn the mesh off and we can just come over

271

and export that as a step file i just sat any of those neutral formats

272

and again today's was more about talking about the selection tools

273

and mesh processing and things like that

274

because we do focus a lot on the modeling techniques

275

but sometimes we want to make sure we focus on the the mesh tools as well

276

so with that hopefully that was valuable for everybody we'll jump back over to our powerpoint

277

i hope everyone has been enjoying the re lab webinar

278

and i'm always striving to make it better and gather input from a variety of sources.

279

And I had the idea to create a survey and put out a survey just asking for feedback.

280

Mainly the feedback is just to gather data points on the topics,

281

the applications, and if there are any other ideas of applications

282

that people might like us to focus on

283

and just kind of get the pulse of what you guys like to see what you like to hear

284

so this is a very open form it asks for some feedback

285

and suggestions and we'll go through those and implement those so

286

if you have any proposed topics or things

287

that you might want to learn about designx then go ahead

288

and scan this qr code it takes you straight to a form and we will take that and implement it.

✨ अनुशंसित वीडियो

92 वाक्य

इस क्लिप के लिए बोलने के लक्ष्य

इस वीडियो में प्रस्तुत संवाद का मुख्य उद्देश्य अंग्रेजी बोलने के अभ्यास को बढ़ावा देना है। यह वीडियो उन अंग्रेजी शिक्षार्थियों के लिए है जो अपने उच्चारण और संवाद कौशल में सुधार करना चाहते हैं। यहाँ पर, हम चयन और स्कैन प्रोसेसिंग टूल्स का प्रयोग करते हुए वार्तालाप करना सीखेंगे, जिससे आप अपने वार्तालाप कौशल को और भी बेहतर बना सकें। यह अभ्यास आपको आत्म-विश्वास के साथ विभिन्न उद्योगों में अंग्रेजी बातचीत करने में मदद करेगा।

फ्रेज बैंक

“हम एक उपभोक्ता उत्पाद पर काम करने जा रहे हैं।”
“आवश्यक स्किल्स का इस्तेमाल करके हम जीवन को बेहतर बनाएंगे।”
“स्कैन डेटा का सही प्रयोग करना।”
“यहां हम इसे एकल स्कैन में प्रोसेस करेंगे।”
“हम एक अच्छा मर्ज करेंगे।”

अपनी कमजोरियों को सुधारें

यह वीडियो अंग्रेजी उच्चारण में सुधार करने पर केंद्रित है। विशेष रूप से, यह आपको “स्कैन डेटा” और “सलेक्शन टूल्स” जैसे तकनीकी शब्दों का सही उच्चारण करने में मदद करेगा। वीडियो में सुने गए संवाद में आपको विभिन्न वाक्यांशों का उच्चारण और प्रतिध्वनि (echo) जैसी तकनीक का उपयोग करना सिखाया जाएगा। अंग्रेजी शैडोइंग, या "shadowspeak," का अभ्यास करते हुए, आप इन शब्दों और वाक्यों को सही ढंग से बोलना सीखेंगे। इससे आपकी रिदम और समर्पण क्षमता में सुधार होगा, जो कि एक प्रभावी वार्ताकार बनने के लिए आवश्यक है।

इस वीडियो के माध्यम से, आप न केवल तकनीकी अंग्रेजी शब्दावली सीखेंगे, बल्कि अपने बोलने की गति और स्पष्टता को भी बेहतर बनाएंगे। यह अभ्यास न केवल मददगार है, बल्कि यह आपको आत्म-विश्वास भी देगा। जब आप संवाद में स्वयं को अधिक सहज महसूस करेंगे, तो आपका अंग्रेजी बोलने का अभ्यास और भी मजेदार बना जाएगा।

इस वीडियो का व्याकरण

वक्ता जिन संरचनाओं का सबसे अधिक प्रयोग करता है, वीडियो के असली शब्दों के साथ:

संरचना	वीडियो में
Present perfect have/has + past participle — बीता हुआ काम जिसका असर अभी भी है	hasn't been · we've covered · have disconnected
Passive voice be + past participle — ज़ोर इस पर कि क्या होता है, न कि कौन करता है	was invented · is set · are not selected

शैडोइंग तकनीक क्या है?

शैडोइंग (Shadowing) एक विज्ञान-समर्थित भाषा सीखने की तकनीक है जो मूल रूप से पेशेवर दुभाषिया प्रशिक्षण के लिए विकसित की गई थी। विधि सरल लेकिन शक्तिशाली है: आप मूल अंग्रेज़ी ऑडियो सुनते हैं और तुरंत इसे ज़ोर से दोहराते हैं — जैसे वक्ता की छाया 1-2 सेकंड की देरी से। शोध से पता चलता है कि यह उच्चारण सटीकता, स्वर, लय, जुड़ी हुई ध्वनियाँ, सुनने की समझ और बोलने की प्रवाहशीलता में काफ़ी सुधार करता है।

शैडोइंग तकनीक: पूरी चरण-दर-चरण गाइड पढ़ें →

शैडोइंग अभ्यास: Using Selection & Scan Processing tools for reverse engineering | Geomagic Design X - वीडियो के साथ अंग्रेजी बोलना सीखें

How Things Are Made | An Animated Introduction to Manufacturing Processes

Course Preview | SC-100 | Microsoft Cybersecurity Architect

VMM I O-INSPECT I Curve

Awards submission: DuraShield from SurGenTec

REVIT 2023 FOR MEP - SYSTEM PIPING

Uber Data Engineering Mock Interview - Ride-Sharing Data Warehouse Schema

The 7 Quality Control (QC) Tools Explained with an Example!

Design Patterns in Java Theory

BAS Bootcamp: Day 6 Setting up IO Internally

NVIDIA GTC 2025 - Keynote Highlights by NVIDIA CEO Jensen Huang

Transient Thermal Analysis in ANSYS AIM

My UX Design Case Study Presentation that Got Me Hired | Case Study Walkthrough

इस क्लिप के लिए बोलने के लक्ष्य

फ्रेज बैंक

अपनी कमजोरियों को सुधारें

इस वीडियो का व्याकरण

शैडोइंग तकनीक क्या है?