शैडोइंग अभ्यास: Working as a Fire Protection Engineer - First Six Months Experience - वीडियो के साथ अंग्रेजी बोलना सीखें

It's now been half a year since I started working as a fire engineer

and during that time I had a total of 53 projects ranging from smaller projects like sheds

and offices to shopping centers and health clinics and here are some of my thoughts.

For my first day at work I got a quick introduction to the basic commands in AutoCAD

and the company's routines and was then handed the CAD drawings of a new building.

I got a few minutes to look at it before having

a meeting with my co-worker without really knowing anything about consultant

work whatsoever where the drawings was for a new two-story shopping center with a two-story parking garage

and this was going to be my first ever project.

That specific project quite literally just started digging just around a month ago

which got me understanding of how long the pre-building process of new buildings actually take.

Now that I got quite a routine built I start every new project by going through the plans of the building, seeing a situation in comparison to other buildings,

as well as a distance to the closest fire department.

I then instantly start to sketch out the ideas of how

the fire protection strategy can be made as efficiently as possible

with my knowledge of the pre-accepted rulesets from the regulations before even writing a single word in the report.

After sketching off the drawings, I get it up in the report, running down the criteria given for the specific risk category that the building is set in, using the regulation's 17 chapters on fire safety,

ranging from a building's load-bearing capacity to securing the safety of the fire department in an emergency situation.

If there's some parts of the regulation that seems a bit redundant for for the specific buildings or even hard to achieve, it might be needed to do some extra analysis,

calculations or simulations to prove that the fire safety of the building is achieved without that specific criteria.

So far during my 53 projects, there's been the need to do that for 60% of them.

So it's quite a common practice.

Doing this involves doing some other measures such as the installment of sprinkler systems where it's not technically a requirement, direct alarm to the fire departments,

or just passive measures that will just secure a quick egress of the building.

But I think I'll dive more into that in a different video.

It gets quite hard to keep track of all the projects, as in a busy day you might work on up towards 10 different projects at the same time, so to stay organized I got a folder with shortcuts to all my projects,

links from our work database, while also typing up the progress of each project onto my personal Notion page or OneNote.

When I first started I was very afraid to do any mistakes, as a slight mishap from my part might result in an unsafe construction being built

but luckily our internal quality control ensures

that there's at least three engineers on each project where one creates the product one does a thorough quality control

and a third person evaluates the quality control as the final

step before the project is sent out to a customer

if it's a more complicated project where some of the solutions

are not amongst the regulations pre-accepted ones it might also require the separate quality control from a different firm

which has their own multi-step quality control it really puts your mind to ease a little bit more than

if you were the sole responsible person for each project.

All in all, I really like my job.

The fact that every building is different and

that some buildings will require a totally new solution

that needs to be simulated and documented to fit the regulations makes it that you're constantly learning something new.

There's also different routes to take as a fire engineer, but becoming a fire safety advisor was most likely the best fit for me personally as I enjoy using my brain.

And even though it's mainly an office job, you also get to go out on site and see what the sentences that you write in the report actually mean.

Another route

that I would personally consider doing is experimental fire research as

you get to see more of what the different solutions Amongst other things actually does firsthand.

So during my bachelor thesis we did multiple full-scale experiments and I had a lot of fun

So we did experiments using water curtain sprinklers protecting windows towards an outdoor emergency path

So you can watch this playlist next if you're interested in

that it shows the whole process from gathering theory to finishing the actual experiments Anyways, thanks for watching and have a good one.

✨ अनुशंसित वीडियो

261 वाक्य

🚨 Most organizations don't fail ISO/IEC 27001 because they don't understand the standard...

Business EnglishUniversity StudentsWorking Adults

11 वाक्य

What Does an Interior Designer Actually Do? | ARTiculations

Business EnglishUniversity StudentsWorking Adults

32 वाक्य

Day 1.2

Business EnglishUniversity StudentsWorking Adults

22 वाक्य

B1-B2 English Shadowing Practice: New Job in a New City

Business EnglishInterview EnglishDaily Conversation

443 वाक्य

Functional-Oriented Documentation in Automation - Eplan & IEC 81346 Explained

Business EnglishUniversity StudentsWorking Adults

227 वाक्य

Civil 3D course for beginners - Part 1 of 3

Business EnglishUniversity StudentsWorking Adults

शैडोइंग तकनीक क्या है?

शैडोइंग (Shadowing) एक विज्ञान-समर्थित भाषा सीखने की तकनीक है जो मूल रूप से पेशेवर दुभाषिया प्रशिक्षण के लिए विकसित की गई थी। विधि सरल लेकिन शक्तिशाली है: आप मूल अंग्रेज़ी ऑडियो सुनते हैं और तुरंत इसे ज़ोर से दोहराते हैं — जैसे वक्ता की छाया 1-2 सेकंड की देरी से। शोध से पता चलता है कि यह उच्चारण सटीकता, स्वर, लय, जुड़ी हुई ध्वनियाँ, सुनने की समझ और बोलने की प्रवाहशीलता में काफ़ी सुधार करता है।

शैडोइंग तकनीक: पूरी चरण-दर-चरण गाइड पढ़ें →

शैडोइंग अभ्यास: Working as a Fire Protection Engineer - First Six Months Experience - वीडियो के साथ अंग्रेजी बोलना सीखें

Your Life as Every Industrial Engineer Rank

Petroleum - 06 - Drilling Fluid Laboratory

Manual Testing: QA Interview Preparation Questions and Answers

Complete Guide to the FIDIC Red Book 2017 | Construction Contract Explained

Science Writing: Practice Makes It (Almost) Perfect

How to EASILY Create a Driver-Based Forecast (FP&A)

🚨 Most organizations don't fail ISO/IEC 27001 because they don't understand the standard...

What Does an Interior Designer Actually Do? | ARTiculations

Day 1.2

B1-B2 English Shadowing Practice: New Job in a New City

Functional-Oriented Documentation in Automation - Eplan & IEC 81346 Explained

Civil 3D course for beginners - Part 1 of 3

पहला प्रभाव

इसे तोड़ें

अभ्यास की दिनचर्या

शैडोइंग तकनीक क्या है?