Shadowing Practice: Making a 360° Controller Smaller than a Penny! - Learn English Speaking with Video

Choose a practice mode

Each mode opens a full-screen practice room.

41 sentences
If sentences are too short or too long, click Edit to adjust them.
1
this is probably the smallest Wireless sensory controller it is designed to be a tiny maker friendly Arduino compatible module which can sense light and perform 9-axis motion Fusion making
2
it easier to build wearables tiny robots and cool iot projects computer turn off my robot but with hundreds of Arduino compatible boards already out there why design a new one
3
let's say you want to build a tiny robot you need motors, wheels, drivers, a small wireless controller, sensors, a battery and a charger suddenly your tiny robot is not so tiny anymore so in this project I
4
want to simplify as many of these connections as possible to build a more compact brain for our tiny robot my only condition is that has to be small as possible packing as many features as
5
it can this really depends on our microcontroller first I was going to use this tiny BLE module it's one of the smallest modules out there but it's not that popular in the maker Community the esp32 on
6
the other hand is a much more popular iot solution and there are already some tiny modules available this is probably one of the smallest esp32 modules that exist on the market which is called the esp32
7
xiao so something this size is feasible but the only thing that I don't like about this is that it has an external antenna this is not going anywhere but I prefer to have the antenna as solid state
8
directly integrated inside the PCB there are various families and series available but I decided to go with the C3 which has an on-board antenna that is FCC certified having an
9
non-chip antenna would probably make our board a bit smaller but it would be too expensive to certify as a development board so this tiny module seemed like the best option this supports both BL
10
and WiFi and works with the Arduino framework it can also be programmed directly through the USB data lines without need of extra chips some modules also include a switch to get the esp into
11
boot mode in case it freezes but honestly that rarely happens so to save space we're not going to add the switch in case that happens you can always reset the power or make a physical short
12
between ground and the boot pin the gpios took a bit of space but it was important to use standard pitch connectors this makes the board compatible with other sensors modules and headers keeping
13
everything maker friendly the castellated pins also allow for easier soldering if needed as you can see the SP takes most of the area so we have to place the USBC on the bottom side this leaves
14
us with a little bit of space left just enough to add a tiny 3.3 volt voltage regulator an LED and a battery charger one PCBway box later we got our board it was very satisfying to look at how small
15
this was but I was still a bit disappointed that I couldn't fit any sensors on this first prototype soldering this tiny double-sided board was quite a challenge but shortly after assembly I
16
realized that there was a major issue with the design the power through the esp32 had to be supplied through the 3.3 volts regulator which had to be supplied through the battery which had
17
to be charged through the charging chip which had to be powered through the USB cable but without the battery the charger could only Supply a few milliamps so I couldn't just power it through
18
a USBC alone this meant that the challenge had become even greater apart from the sensors I had to fit a new bigger chip with a pass through USB battery charger allowing the board to be powered
19
through either a battery a USB cable or both while we're here we should also probably fix the fact that the battery has to be soldered onto the board this can either rip off the pads or risk
20
accidental shorting I spent days on Alum designer exploring all its tools to figure out how to make this happen and it took weeks of refinement and multiple iterations to get it right being small
21
is was going to set this board apart from the rest so every millimeter and every track really counted this took a long time to design because every change had to fully sinking but having Alum
22
365 in my pocket meant that I could brainstorm on the project from anywhere I go click the link in the video's description to try out this handy tool
23
the codecell lives on an 18.5 by 18.5 mm PCB the first tradeoff that I had to make was pushing the antenna out of the board's Edge this is a very common thing and the is completely safe but it added an extra 5 mm on one of the sides
24
freeing up some more space on the bottom side of the PCB the second tradeoff was moving the USBC underneath the ESP this was a huge win because it added five extra pins but before I start getting
25
hate comments from RF Engineers just hear me out in the RF word any signals close to the antenna can lower its efficiency and range the USBC is in a safe region but when the cable is connected it's
26
kind of a different story but when testing this with different USBC cables the attenuation was barely noticeable this probably because most USBC cables are shielded so overall this was the best
27
option when prioritizing space I don't think it's that big of an issue because most probably the USBC cable will mostly be used for charging and the application will shut down during charging a
28
small downside to this approach is that the board had to be slightly thicker to make space for the Cable but with this new design change I managed to fit an addressable led a 3.3 Voltage regulator
29
the new charging chip a battery connector and 2 100 microfarad bulk capacitors these were the largest capacitors I could fit in this space and from testing they were enough to supply DC motors PCB motors
30
actuators and the 945 LEDs mounted on my spherical display on the bottom side we have the ESP 32 C3 a light sensor and a motion sensor to simplify how these devices are configured and
31
talked to each other we developed an easy to use Arduino Library which can get you started with a few lines of code this is supported by multiple examples and tutorials on our website the onboard
32
infrared light sensor lets you play around with depth gestures Auto dimming and proximity detection there is also an optional motion sensor this has an advanced inertial measurement unit
33
which is kind of a pricey upgrade the development boards from adafruit alone cost around $25 but I think it's well worth the investment on putting this on the code cell because it integrates a
34
3-axis accelerometer gyroscope and magnetometer internally it also combines the data from these three sensors using a Sensor Fusion algorithm to read tap detection, step counting, activity
35
guessing, angular rotations and much more now the cool thing about codecell is that you can combine all the data from these sensors with popular esp32 applications so you can easily create
36
a wireless remote prompt jokes with AI and even connect it with Alexa computer turn off my LED computer turn on my LED
37
computer please turn on my robot computer turn off my robot
38
I'm super proud with how this project turned out and I'm personally using it to build smaller and smaller robots we're planning to turn some of these into kits using Codecell
39
as the main platform I'll be showing more of these robots in the coming weeks but for now I just want to see what you create with it if you'd like to start building with codecell head on to microbots.io and it should arrive in a few days you can either buy it with
40
both sensors or just the light sensor which is a more affordable solution to get you started with the basic applications if you enjoyed this video please share it, hit the like button and consider
41
subscribing if you haven't already huge thank you to all my patreons for supporting my work

Download App

Everything you need to speak fluently

AI PronunciationScore every sentence
IPA PracticeMaster every sound
VocabularyBuild your word bank
Vocab GameLearn while playing
FOR YOU

Recommend Video

Vocabulary and speaking notes for this lesson

This video has 41 sentences and 1398 words to shadow. The speech runs for 8:30. The speaker talks at a natural 165 words per minute, close to everyday conversation. Only 77% of the words are among the 3,000 most common in English, so the vocabulary is demanding.

Key vocabulary in this video

15 words from the video worth learning, with pronunciation and meaning:

WordPronunciationMeaning
sensor noun/ˈsɛn.sɚ/A device or organ that detects certain external stimuli and responds in a distinctive manner.
robot noun/ˈɹoʊ.bɑt/An intelligent mechanical being designed to look like a human or other creature, and usually made from metal.
module noun/ˈmɑd͡ʒul/A self-contained component of a system, often interchangeable, which has a well-defined interface to the other components.
antenna noun/ænˈtɛn.ə/An appendage used for sensing on the head of an insect, crab, or other animal.
chip noun/t͡ʃɪp/A small piece broken from a larger piece of solid material.
charger noun/ˈt͡ʃɑɹd͡ʒɚ/A device that charges or recharges.
maker noun/ˈmeɪk.ɚ/Someone who makes; a person or thing that makes or produces something.
wireless adjective/ˈwaɪ(jə)ɹ.ləs/Not having any wires.
compatible adjective/kəmˈpæt.ə.bəl/Capable of working together without conflict.
regulator noun/ˈɹɛɡ.ju.leɪ.tɚ/A device that controls or limits something.
connect verb/kəˈnɛkt/To join (to another object): to attach, or to be intended to attach or capable of attaching, to another object.
pin noun/pɪn/A needle without an eye (usually) made of drawn-out steel wire with one end sharpened and the other flattened or rounded into a head, used for fastening.
boot noun/but/A heavy shoe that covers part of the leg.
combine verb/kəmˈbaɪn/To bring (two or more things or activities) together; to unite.
controller noun/kənˈtɹoʊlɚ/One who controls something.

Phrasal verbs you will hear

WordMeaning
turn off verbTo power down, to switch off, to put out of operation, to deactivate (an appliance, light, mechanism, functionality etc.).
figure out verbTo come to understand; to discover or find a solution; to deduce.
pass through verbTo go through, to travel through, to transit or lie across a place or from one place to another.
rip off verbTo pull off by ripping.
shut down verbTo close, terminate, or end; to stop operating, either permanently or temporarily.
try out verbTo test (something) to see how it works or whether it is suitable.
turn out verbTo end up; to result.

Grammar in this video

The structures the speaker uses most, with the exact words from the video:

StructureIn the video
Passive voice be + past participle — the focus is on what happens, not who does itis designed · is called · be programmed
Relative clauses who / which + clause — extra information about a person or thingmodule which can · market which is · Library which can

Pronunciation to watch

The speaker uses 12 contractions and reduced forms, such as we're, couldn't, don't. Say them the short way, as you hear them.

  • The “th” sounds: thick /θɪk/, underneath /ˌʌndɚˈniθ/, algorithm /ˈælɡəɹɪðm̩/
  • The “sh” and “zh” sounds: detection /dɪˈtɛk.ʃən/, shortly /ˈʃɔɹtli/, efficiency /ɪˈfɪʃ.ən.si/, shield /ˈʃild/, rotation /ɹoʊˈteɪʃən/
  • Long words — get the stress right: compatible /kəmˈpæt.ə.bəl/, regulator /ˈɹɛɡ.ju.leɪ.tɚ/, disappointed /ˌdɪsəˈpɔɪnɪd/, efficiency /ɪˈfɪʃ.ən.si/, affordable /əˈfɔɹ.də.bəl/

How to practise with this video

  1. Listen to the whole video once without speaking and note the words you do not know.
  2. Start at 0.75× speed, shadow it sentence by sentence, then go back to normal speed once it feels easy.
  3. Record yourself and compare with the original, paying attention to words like sensor, robot, module.

What is the Shadowing Technique?

Shadowing is a science-backed language learning technique originally developed for professional interpreter training and popularized by polyglot Dr. Alexander Arguelles. The method is simple but powerful: you listen to native English audio and immediately repeat it out loud — like a shadow following the speaker with just a 1–2 second delay. Unlike passive listening or grammar drills, shadowing forces your brain and mouth muscles to simultaneously process and reproduce real speech patterns. Research shows it significantly improves pronunciation accuracy, intonation, rhythm, connected speech, listening comprehension, and speaking fluency — making it one of the most effective methods for IELTS Speaking preparation and real-world English communication.

Shadowing technique: read the full step-by-step guide →