Shadowing Practice: How to Create a Strength & Conditioning Program for Athletes | Programming for Athletic Performance - Learn English Speaking with Video
Bir pratik modu seçin
Her mod tam ekran bir pratik odası açar.
177 cümleler
Cümleler çok kısa veya çok uzun ise, ayarlamak için Düzenle'ye tıklayın.
1
Hi everyone.
2
Peter here from Flow High Performance
3
and in this video we'll be covering how to write a strength and conditioning program for athletes.
4
The first thing to establish is what athletic qualities can be trained that can benefit physical performance for an athlete.
5
We have several components that can be trained using strength and conditioning training.
6
We will now briefly cover each of these qualities.
7
The first is linear speed.
8
This refers to how fast an athlete can run in a straight line.
9
This includes both acceleration ability as well as maximum speed running.
10
We also have change of direction ability.
11
This refers to how quickly an athlete can decelerate, turn in a different direction, and then re -accelerate in that direction.
12
Reactive power is the next quality which refers to the ability to produce high forces in very short times.
13
The stretch shortening cycle plays a large role in this quality, allowing efficient force transfer through the use of elastic energy.
14
The next quality is traditional power.
15
This refers to moving moderate to heavy loads as fast as possible.
16
This is similar to reactive power, although loads used are much heavier.
17
Therefore the speed of movement is much slower.
18
Maximal strength is the next quality which simply refers to maximum force production.
19
Another trainable quality is hypertrophy, which refers to muscle growth.
20
Some athletes may seek to enhance muscle size for their sport.
21
And lastly, we can also include metabolic conditioning or endurance training.
22
This refers to improving the repeatability of an exercise.
23
Now that we've discussed what potential physical qualities we can train with strength and conditioning training,
24
we now need to establish what qualities will actually be beneficial to train for a specific athlete.
25
Let's take the example of a generic rugby player and establish what qualities they will need to train.
26
Linear speed is important for most positions to both beat defenders and to also chase attackers.
27
Change of direction is important since players often need to run in different directions based on the run of the game.
28
Reactive power is important for most positions as it will help with maximal velocity running.
29
Traditional loaded power is also important since it will help speed
30
and acceleration and players often need to overcome the resistance of their opponents during tackles.
31
Maximal strength is important for overall robustness and its benefits for all other qualities.
32
Hypertrophy may be important for most players, since a bigger body is generally better for tackles
33
and it can also be helpful to build up susceptible areas that are prone to injury.
34
And lastly, endurance training is also important to ensure high intensity efforts are able to be repeated throughout the entire match.
35
you If we now take the example of a volleyball player, the qualities they require may look slightly different.
36
Linear speed, hypertrophy or endurance will hardly be beneficial for the physical performance of a volleyball athlete.
37
However, change of direction training may be useful as volleyball athletes
38
are frequently stepping in different directions based on the run of the gameplay.
39
Reactive power is probably useful for repeated jumps or running jumps.
40
Loaded power will enhance vertical jump performance.
41
And maximal strength will enhance all other qualities and provide robustness to the athlete.
42
So each athlete or team should be trained based on which qualities they require in their sport you
43
Let's use the example of this rugby player that we discussed.
44
and write a program for them throughout this video.
45
So for the rugby athlete, although every quality is important for their training,
46
Change of direction and endurance training will be performed frequently enough during sport practice
47
that it doesn't need to be specifically trained during strength and conditioning sessions.
48
Therefore, for this example we are only going to include linear speed, reactive power, traditional loaded power, maximum strength and hypertrophy training.
49
Now that we know what qualities we will be targeting, the next consideration is how the program will be structured.
50
Bye.
51
First and foremost, we need to establish how many overloading versus deloading weeks we are going to employ.
52
you Generally speaking, anywhere between 2 -6 weeks of overloading training can be implemented before a deload week.
53
More advanced athletes will generally require deloads more frequently and may veer towards the lower end of these recommendations.
54
while less experienced athletes may be able to handle more overloading training before a deload week is implemented.
55
For our example rugby player, we're going to implement a 4 :1 overload to deload week ratio.
56
meaning that 4 weeks of overloading training will be employed before a 1 week deload.
57
The next factor to plan for our program structure is what order the training qualities will be performed in.
58
As a general rule, the following order is recommended: first linear speed training, next change of direction, then reactive power,
59
loaded power, max strength, hypertrophy and endurance training last.
60
This order is recommended since the first qualities on this list are the most fatigue -sensitive, while the last qualities are the least fatigue -sensitive.
61
For example, very small levels of fatigue will significantly impact linear speed.
62
while an adequate training stimulus can still be achieved for hypertrophy or endurance training even with moderate levels of fatigue.
63
So for our rugby player example, we will order our sessions by performing linear speed first, reactive power second, loaded power third,
64
max strength fourth, and hypertrophy last.
65
The next stage in writing a program is to select exercises for each of the qualities that will be trained.
66
The exercise selection will be based on numerous factors such as training age, time of year and individual injuries.
67
Athletes with more experience in strength
68
and conditioning training can use more advanced exercises than an athlete who has never been in a weight room.
69
Furthermore, an experienced athlete may not get enough stimulus from a certain exercise to improve performance.
70
while almost any exercise will work for a novice.
71
For example, an experienced athlete may be able to perform back squats as a strength exercise, while a novice may be better off doing walking lunges,
72
since they may not be able to perform a back squat with safe and effective technique.
73
The time of year also dictates what exercises will be selected.
74
Certain times of the year may be very intense during the sport practice for the athletes, and strength and conditioning exercises may need to be less intense to avoid injury.
75
During the middle of the season or toward the end of a long season,
76
we may want to implement more joint -friendly exercises to reduce the risk of joint pain and injury. For example,
77
we may select box jumps as a power exercise rather than squat jumps to reduce the eccentric loading on the hips, knees and ankles.
78
And lastly, exercise selection may need to alter based on individual anatomy and injuries.
79
Some athletes simply find certain exercises to be irritating on the joints.
80
while other exercises aren't.
81
Obviously in this case, the exercises should be changed to something that the athlete can perform safely.
82
For example, it is common that athletes have shoulder issues during the barbell bench press.
83
This can be changed to a dumbbell bench press
84
or weighted dips as an alternative exercise and will achieve essentially the same adaptations.
85
Also, athletes may prefer certain exercises over others, and are therefore likely to put in more effort.
86
So if the program allows, an athlete's preferences should be preferred over exercises they dislike.
87
Let's now select some exercises for our example rugby player.
88
For linear speed training, we've implemented rolling sprints and resisted sprints.
89
This covers both top speed running and specific acceleration training.
90
For reactive power training, we've chosen hurdle jumps as a plyometric exercise.
91
For traditional loaded power training, the trap bar jump was selected.
92
Strength training consists of box squats and bench press, and hypertrophy training includes dumbbell rows,
93
stiff leg deadlifts, and lateral neck raises for injury prevention.
94
And the last program in consideration is what method of progression will be employed for the training block.
95
We will now cover the best way to progress each quality over time.
96
The method of progression will always follow a general to specific model, meaning that the quality will become more specific as it progresses.
97
Let's first start with linear speed training.
98
Linear speed training should be progressed via increasing the distance of the sprints.
99
This is because the longer the distance is, the faster the speed the athlete can run, up to a certain point that is.
100
So sprint training should start with short distance sprints of around 10 metres
101
and increase over time up to around 60 metres or longer.
102
allow the tissues to adapt to the stress.
103
If resisted sprints are also implemented for acceleration training, this should also follow a similar progression.
104
However, distances may only need to be progressed up to around 30 meters rather than 60 meters.
105
Also, resisted sprints should start with heavier loads and decrease the loads over time to allow faster running speeds.
106
Change of direction training will be performed so frequently during sport practice
107
that that the only real variable we can manipulate is the volume.
108
However, if additional change of direction work will be performed during the strength and conditioning sessions, then it can be progressed in a slightly different way.
109
The best way would be to start with larger change of direction angles and progress to smaller angles,
110
For example, we may start with 90 degree cuts and slowly progress until full 180 degree turns are performed.
111
Furthermore, the speed of the approach can be increased.
112
If the athlete runs faster into a turn, there will be more inertia to overcome and more eccentric force required to decelerate.
113
Reactive strength should be progressed via decreasing the contact times over time.
114
This is because we ultimately want this type of training to transfer to running and jumping performance, which will have very short ground contact times.
115
This can be done by manipulating the exercises performed, and also the external load used.
116
For example, weighted depth jumps may be performed early in the program, where the goal is to jump as high as possible.
117
This could then progress to unloaded hurdle jumps, where the goal is to minimise ground contact time.
118
Loaded power training should follow a very similar model of progression.
119
Load should start heavier, which also means slower movement velocity, and progress to lighter loads with faster velocities.
120
Maximal strength should follow a linear type periodization model.
121
This means that higher volumes and lighter weights are used earlier in the program, and this progresses to heavier loads with lower volumes.
122
This is a logical progression to follow, since maximal force production is the goal, which is best achieved by lifting the heaviest loads possible.
123
Hypertrophy training may not have a particular periodization model to follow, as it is a structural adaptation rather than a neural adaptation.
124
Therefore, the method of progression employed probably won't change from block to block.
125
although the week -to -week progression is still important.
126
Generally, hypertrophy training is best achieved by using multiple sets of 6 reps or greater, and taken fairly close to failure.
127
This can then be progressed by increasing the number of reps performed, increasing the load lifted, or increasing the number of sets performed.
128
And endurance training will likely be performed primarily by manipulating sport practice sessions, rather than separate conditioning sessions.
129
However, additional running may be implemented at certain times throughout the year
130
if the players aren't getting enough conditioning training from the sport.
131
Therefore, we can progress this by starting with longer distance, lower intensity running, and progressed to higher intensity, shorter distance running.
132
For example, we may start with slower continuous running for longer distances
133
and progress to short interval sprints with limited recovery between efforts.
134
Let's now implement these methods of progression into our rugby player program example.
135
For a 15 -week program, the first five weeks may look something like this.
136
We can see here that the linear speed exercises are progressed by increasing the distances each week.
137
We can also see that the resisted sprints use a heavy load, which will mean more force production but slower running speeds.
138
For reactive power Depth jumps were chosen where the goal is maximal jump height, an additional weight will be used.
139
This will mean fairly long ground contact times, but high force production.
140
This is progressed by adding an additional rep to each set each week.
141
For a loaded power exercise, the trap bar jump was chosen.
142
As we can see here, the sets and reps stay the same, although the load used decreases.
143
This will mean that greater jump height and faster movement velocities will be expected week to week.
144
For strength training, The box squat and bench press were selected.
145
The progression here is that weight remains the same while the sets
146
and reps increase over the weeks as a method of increasing volume.
147
And lastly, we have hypertrophy training, where stiff leg deadlifts, dumbbell rows and neck raises for injury prevention have been implemented.
148
Bye.
149
I've just shown a different method of progression for each five -week block, to give some examples.
150
In this block, the reps and weight remain the same, while the number of sets increases each week.
151
In the second block, the training has progressed again to be slightly more specific.
152
For our linear speed, the distances increase week to week as per the last block, although they start at a longer distance and progress even further.
153
Also, the resisted sprints now use a moderate load rather than a heavy load, meaning that running speeds will be slightly faster.
154
Reactive Power now uses hurdle jumps rather than depth jumps, where the focus is on minimal ground contact time.
155
However, an additional 5 kilos has been chosen which will slightly increase contact times and also increase force production.
156
Once again, the number of reps performed increases each week.
157
The trap bar jump is still used for loaded power and the same model of progression is employed.
158
However, this time the load is decreased even more from the last block, meaning that velocity will be even faster.
159
Strength training now uses lower reps with heavier loads.
160
and we can see here that the number of sets and reps remains the same, while the load is increased slightly each week.
161
And the next hypertrophy example follows a progression of increasing the number of reps performed each week, while the sets and load remains the same.
162
In this example, one extra rep is performed over the three sets each week.
163
And now the last five -week block of the program may look something like this.
164
Once again, the distances of the sprints are increased each week to even further distances again.
165
The resisted sprints now use light loads to allow faster running speeds.
166
Hurdle jumps are still used as a reactive power exercise, although this time no additional load is used.
167
This will decrease ground contact times and be most specific to sprinting and jumping performance.
168
The trap bar jump follows the same progression model, although the loads decrease even further again, allowing even greater jump heights.
169
Strength training now has the same method of increasing load each week, although the number of sets performed also decreases.
170
Also, only sets of one rep are being performed as this allows the highest force production.
171
And lastly, hypertrophy training follows a method of increasing load over time.
172
This is possible with heavier compound lifts like the stiff leg deadlift, although exercises which use lighter loads will be very difficult to increase load each week.
173
Therefore, Loads may have to be increased less frequently, and when they do increase, Lower reps may need to be employed.
174
As we can see for the dumbbell row and neck raise, the load increases in week 3 and the reps decrease.
175
Then in week 4, The reps increased with the new heavier load.
176
Thanks for watching and hopefully you got something out of this video.
177
Remember to subscribe if you haven't already.
Uygulamayı İndir
Akıcı konuşmak için ihtiyacınız olan her şey
AI TelaffuzHer cümleyi puanla
IPA AlıştırmasıHer sesi ustalaştır
Kelime BilgisiKelime bankanızı oluşturun
Kelime OyunuOynarken öğrenin
FOR YOU
Video Öner
C12
508 cümleler
Essentials: How to Assess & Improve All Aspects of Your Fitness | Dr. Andy Galpin
Business EnglishUniversity StudentsWorking Adults
C13
247 cümleler
Build a proactive agent workflow with Claude Code
Business EnglishUniversity StudentsWorking Adults
C19
78 cümleler
How to enter ‘flow state’ on command | Steven Kotler for Big Think
Business EnglishUniversity StudentsWorking Adults
C12
132 cümleler
The Best Full UPPER BODY Workout For Max Muscle Growth (Science Applied)
Business EnglishUniversity StudentsWorking Adults
B23
66 cümleler
CAE8 O TEST1 PART3
Business EnglishDaily ConversationUniversity Students
C18
104 cümleler
Understanding Sports Injuries: Definition, Classification, and Impact
Business EnglishUniversity StudentsWorking Adults
C19
38 cümleler
The Neuroscience of Learning
Business EnglishUniversity StudentsWorking Adults
C12
96 cümleler
Gân Achilles - Bí Quyết Bứt Tốc & Bật Cao Như VĐV Chuyên Nghiệp | T3KT SCIENCE BASED | SmallGym
Business EnglishUniversity StudentsWorking Adults
C16
71 cümleler
How to Force Your Brain to Crave Doing Hard Things
Business EnglishUniversity StudentsWorking Adults
B24
125 cümleler
Are soccer players the most fit athletes on the planet?
Business EnglishDaily ConversationHigh School Students
C19
74 cümleler
Dolph Lundgren - Maximum Potential
Business EnglishUniversity StudentsWorking Adults
B24
122 cümleler
5 Ways To Become A Better Badminton Player
Business EnglishHigh School StudentsUniversity Students
Bu dersin kelimeleri ve konuşma notları
Bu C1 seviyesindeki konuşma dersi “How to Create a Strength & Conditioning Program for Athletes” videosuna dayanıyor. En çok tekrarlanan kelimeler: training, load, exercise, athlete, speed. Bu videoda gölgeleme çalışması için 177 cümle ve 2672 kelime var. Konuşma bölümü 17:25 sürüyor. Konuşmacı dakikada yaklaşık 153 kelimeyle, günlük konuşmaya yakın doğal bir hızda konuşuyor. Kelimelerin yalnızca %80’i İngilizcede en sık kullanılan 3.000 kelime arasında, bu yüzden kelime dağarcığı zorlayıcı.
Bu videodaki önemli kelimeler
Videodaki en ileri düzey 15 kelime, telaffuzu ve anlamıyla:
| Kelime | Telaffuz | Anlam |
|---|---|---|
| progression isim | /pɹəˈɡɹɛʃən/ | ilerleme |
| reactive sıfat | /ɹiːˈæktɪv/ | gerici |
| maximal sıfat | /ˈmæksɪməl/ | azami, en fazla |
| endurance isim | /ɪnˈdʊɹəns/ | dayanıklılık |
| overload fiil | /ˌəʊvəˈləʊd/ | fazla doldurmak |
| squat isim | /skwɑt/ | çömelme, skuat |
| velocity isim | /vəˈlɑsəti/ | hız |
| hurdle isim | /ˈhɝd(ə)l/ | engel |
| acceleration isim | /əkˌsɛl.əˈɹeɪ.ʃən/ | tacil |
| fatigue isim | /fəˈtiːɡ/ | yorgunluk, bitkinlik |
| deadlift isim | /ˈdɛdlɪft/ | deadlift |
| manipulate fiil | /məˈnɪp.jʊ.leɪt/ | manipüle etmek |
| volleyball isim | /ˈvɒlibɔ(ː)l/ | voleybol topu, voleybol |
| enhance fiil | /ɪnˈhæns/ | artırmak |
| novice sıfat | /ˈnɑvɪs/ | çömez |
Bu videodaki dil bilgisi
Konuşmacının en çok kullandığı yapılar, videodaki sözcüklerin aynısıyla:
| Yapı | Videoda |
|---|---|
| Koşul cümleleri if + cümle, will/would + fiil — bir koşul ve sonucu | if additional change of direction work will be |
| Edilgen yapı be + fiilin üçüncü hâli — kimin yaptığı değil, ne olduğu önemli | can be trained · be repeated · should be trained |
| Present perfect have/has + fiilin üçüncü hâli — geçmişte olan ama şimdi de önemli olan bir eylem | we've discussed · has never been · we've implemented |
| İlgi cümlecikleri who / which + cümle — bir kişi ya da şey hakkında ek bilgi | performance, which will · goal, which is · load, which will |
Dikkat edilecek telaffuzlar
Konuşmacı we've, aren't, doesn't gibi kısaltılmış biçimleri 11 kez kullanıyor. Bunları duyduğunuz gibi kısa söyleyin.
- “sh” ve “zh” sesleri: progression /pɹəˈɡɹɛʃən/, acceleration /əkˌsɛl.əˈɹeɪ.ʃən/, adaptation /ˌæd.æpˈteɪ.ʃən/, beneficial /ˌbɛn.ɪˈfɪʃ.əl/, inertia /ɪnˈɝ.ʃə/
- Uzun kelimeler — vurguyu doğru yere koyun: hypertrophy /haɪˈpɜɹ.tɹə.fi/, velocity /vəˈlɑsəti/, acceleration /əkˌsɛl.əˈɹeɪ.ʃən/, manipulate /məˈnɪp.jʊ.leɪt/, adaptation /ˌæd.æpˈteɪ.ʃən/
Bu videoyla nasıl çalışılır
- Videonun tamamını konuşmadan bir kez dinleyin ve bilmediğiniz kelimeleri not edin.
- 0,75× hızla başlayın, cümle cümle tekrar edin ve kolaylaşınca normal hıza dönün.
- Kendinizi kaydedin ve orijinaliyle karşılaştırın; progression, reactive, maximal gibi kelimelere özellikle dikkat edin.
Gölgeleme Tekniği Nedir?
Gölgeleme, başlangıçta profesyonel tercüman eğitimi için geliştirilen ve çok dilli Dr. Alexander Arguelles tarafından popüler hale getirilen, bilim destekli bir dil öğrenme tekniğidir. Yöntem basit ama güçlüdür: ana dili İngilizce olan bir sesi dinler ve hemen yüksek sesle tekrar edersiniz — konuşmacıyı 1-2 saniye gecikmeyle takip eden bir gölge gibi. Pasif dinleme veya dilbilgisi alıştırmalarının aksine, gölgeleme beyninizi ve ağız kaslarınızı gerçek konuşma kalıplarını eşzamanlı olarak işlemeye ve yeniden üretmeye zorlar. Araştırmalar, telaffuz doğruluğu, tonlama, ritim, bağlı konuşma, dinleme anlama ve konuşma akıcılığını önemli ölçüde geliştirdiğini göstermektedir — bu da onu IELTS Konuşma hazırlığı ve gerçek dünya İngilizce iletişimi için en etkili yöntemlerden biri yapar.