跟读练习: 17E058 - Back to Back Stations - 通过视频学习英语口语

Hello everyone, I am Monika.

I am here to present back -to -back stations.

Let's see.

What is back -to -back?

Generally, in electronics and power electronics, if two bipolar components are connected in series with opposite polarity, then this pair is known as back -to -back system.

As same as in electrical, rectifiers and inverters are identical

and connected in series is known as back -to -back system from this diagram here rectifier

and the inverter are connected in series via a hvdc link

and it is also a hvdc back -to -back link a back -to -back hvdc link the hvdc system

which transfers energy between two ac buses at the same location is called as back -to -back system

or an hvdc coupling system in other words the converters

and rectifiers are installed and operates on high voltage DC in the same stations.

Hence there is no DC transmission line.

So it reduces the overall conversion cost and improve the reliability of the DC system.

Such type of system is designed for bipolar operation.

This picture shows the bipolar link of a back -to -back link.

A bipolar link has two conductors.

One is positive and the other one is negative.

This link has two converter stations at each end.

The midpoint of the converter station is connected to the air through the electrodes.

Next, we are going to see about the construction of back -to -back HPDC link.

The main components are converter station, converter unit, converter vaults, converter transformer,

filters, high frequency filter, reactive power source, smoothening reactors and then system port.

What do you mean by converter walls?

There are two types of converter walls.

One is the sending end converter and then receiving end converter.

The sending end converter act as a rectifier which converts AC into DC.

The receiving end converter act as a inverter which converts DC into AC.

What are converter transformers?

These are transformers

which are used before the rectification of ac in the hvdc system filters filters may be ac

or dc what is the use of high frequency filters these

are provided to suppress the high frequency currents what do you mean by smoothening reactors smoothening reactors are those

which is used on the dc side to smoothen the dc current as well as the production purposes

This shows the simple block diagram of back -to -back HPDC link.

From the system 1, AC current is converted into DC by means of rectifier

and current DC is supplied via DC link

and it is converted back again to AC by means of inverter and then distributed to the different grids.

It shows the simple block diagram.

Working principle of back -to -back link.

Two independent neighboring transmission systems with incompatible electrical parameters such as frequency

or voltage level or short -circuit power level are connected via a DC link.

The basic principle operation of HPDC linking system is based on the conversion of AC to DC

and vice versa by means of converter volts power from two

or more system is first converted into dc by means of power rectifier system

and then summed up after summing of the resultant power is

again converted into ac with the help of power inverter

and then supplied to different grids the process involved in here is simple only by theoretical

but in practical it is very much complex as it involves high voltages

and power semiconductor devices what are the needs for back -to -back stations we all know

that high voltage ac is used to transmit the electrical power for reducing power transmission losses

in a transmission system different grids are interconnected but sometime it might happen

that one or more grids or power systems may not be in synchronization with other grids

or there exist a weak link between different power systems due

to various factors to overcome these problems hvdc back -to -back system is created it also can be used

when two asynchronous ac system need to be interconnected for a bulk power transmission

and also for the stabilization processes these are the some examples of back -to -back stations mcnell hvdc back -to -back station,

HVDC back -to -back link commissioned between India and Bangladesh, Chandrapur HVDC back -to -back station, Vaisak back -to -back station, Windyashal back -to -back station.

We will see them one by one in the following slides.

McNeil HVDC Back -to -Back Station A back -to -back station

is a series of HVDC interconnectors between the unsynchronized eastern and western AC systems of United States and Canada.

It connects the power grids of Canadian provinces at Alberta and Saskatchewan.

The station was built by Geck -Alstom,

was commissioned in 1989, with the power capacity about 150 megawatt at a DC voltage of 42 kilovolt.

This picture shows the back -to -back station at Alberta.

Mechanical station was notable for operating with low short -circuit ratio.

What do you mean by short -circuit ratio?

Short -circuit ratio is a measure of how strong or weak the connected AC system is.

Most of the HVDC schemes uses line commutated converters with SCR about 3,

but McNeill's scheme was designed to operate with an effective SCR which is even less than 1 .0 on the SASCAT7 side.

So hence it was the only SCR with the lowest value

ever achieved with the line commutated hvdc converter it is also

considered as the first hvdc station to use three phase four winding converter transformer the transformer

which are connected at the 138 glow volt at alberta side

and 230 glow volt on the saskatchi one side the number of poles used in this link is about only one Next,

we are going to see about Indo -Bangladesh link, a SVDC back -to -back link commissioned between India and Bangladesh.

This Indo -Bangladesh link was commissioned by Siemens.

Here, two back -to -back links are installed.

The block one is in operation since 2013 with a capacity of 500 megawatts.

Siemens recently announced that in June 2020, it fully commissioned the second block of hvdc back -to -back

line in barhamara at bangladesh to connect the electricity supply network to india

and bangladesh with the transmission capacity of 500 megawatts hence a total capacity is up to 1000 megawatt

which is the highest reliable power capacity in bangladesh Siemens is a world leader in HVDC technology,

which has installed more than 55 projects worldwide with an overall capacity of 94 GW.

This picture shows the back -to -back stations at Biramara at Bangladesh.

This is the map which shows the back -to -back HVDC link between India and Bangladesh.

Here, from Biramara, at the western border of Bangladesh,

a 230 kV grid of the country will be connected via substation and OH lines to India's 400 kV grid,

which is located at Baharampur.

Next, we are going to see about Chandrapur back -to -back HVDC station.

It is a back -to -back HVDC connection between western and southern regions in India located close to the city of Chandrapur.

Its main purpose is to export power from the Chandrapur Super Thermal Power Station to the southern regions of Indian National Grid.

This picture shows the power station at Chandrapur.

It was owned by Power Grid Corporation of India and the installer for the substation is Gek Alstom and commissioned in 1997.

7 with a power capacity of 500 megawatts at a dc

voltage of 205 kilo volt at each pole next we are

going to see about why is a back -to -back hvdc

station why is a back -to -back hvdc station is a back -to -back hvdc station connection between the eastern

and southern regions in india located close to the city of Viswagapatnam in the state of Andhra Pradesh.

100

It was owned by Power Grid Corporation of India.

101

It has two substations namely VISAG -1

102

and VISAG -2 commissioned in 1999 by Alstom

103

and the latter in 2005 by ABB

104

which has a power capacity of 500 megawatts

105

and a DC voltage of 205 kilovolt at ysac 1 and 176 kilovolt at ysac 2.

106

It consists of two independent poles.

107

The station is no longer required for its original purpose of linking eastern and southern grids,

108

although it can be still used as an embedded power flow device to help control power flow within the AC system.

109

Next, we can see recent developments.

110

Power Grid Corporation of India has chosen Siemens to upgrade India's oldest HVDC link,

111

which is the India's oldest HPDC link.

112

Any guess, Vintiachal back -to -back HPDC link is the India's oldest link.

113

And Siemens has been chosen by Power Grid of India to modernize it.

114

Next, we can see some of the advantages of back -to -back HPDC link.

115

Power can be upgraded to desired frequency then two asynchronous systems can be joined successfully without loss of stability

116

stability of the system is increased as well as power flow can be maintained within the limits

117

more active power can be added where the ac system is

118

already at the limit of short circuit capability then it also

119

helps in the stabilization of weak ac signals weak ac links thank you

✨ 推荐视频

28 句

Comparing Low Voltage Vs. Medium Voltage Equipment on Solar Sites

Business EnglishUniversity StudentsWorking Adults

99 句

12. Parallel Stent Retriever Technique in Mechanical Thrombectomy for Acute Ischemic Stroke

Business EnglishUniversity StudentsWorking Adults

423 句

本课的词汇与口语要点

这节口语课以视频“17E058 - Back to Back Stations”为素材。视频中反复出现的词有：link, station, hvdc, converter, grid。这段视频共有 119 个句子、1512 个单词可供跟读。讲话部分时长为 11:21。说话人语速平稳，每分钟约 133 个词，很适合跟读。只有 76% 的单词属于英语最常用的 3,000 词，词汇难度较高。

视频中的重点词汇

视频中 15 个值得学习的单词，附发音和释义：

单词	发音	释义
grid 名词	/ɡɹɪd/	網格 /网格, 格子
connect 动词	/kəˈnɛkt/	連接 /连接
voltage 名词	/ˈvəʊltɪd͡ʒ/	電壓 /电压
transmission 名词	/tɹænsˈmɪʃən/	傳輸 /传输
frequency 名词	/ˈfɹiːkwənsi/	頻率 /频率, 頻度 /频度
filter 名词	/ˈfɪltɚ/	過濾器 /过滤器, 濾過器 /滤过器
hence 副词	/ˈhɛns/	從這裡 /从这里, 從這兒 /从这儿
ratio 名词	/ˈɹeɪ.ʃoʊ/	比, 比例
pole 名词	/pəʊl/	極 /极
diagram 名词	/ˈdaɪ.ə.ɡɹæm/	圖 /图, 圖表 /图表
reactor 名词	/ɹiˈæktɚ/	反應器 /反应器
principle 名词	/ˈpɹɪn.sɪ.pəl/	原理, 原則 /原则
component 名词	/kəmˈpoʊ.nənt/	元件, 部件
stability 名词	/stəˈbɪlɪti/	穩定性 /稳定性, 穩定 /稳定
electronics 名词	/ɪˌlɛkˈtɹɑ.nɪks/	電子學 /电子学

视频中的语法

说话人最常用的结构，并附上视频中的原话：

结构	视频中的用法
被动语态 be + 过去分词 — 强调发生了什么，而不是谁做的	are connected · is known · is called
现在完成时 have/has + 过去分词 — 过去发生但与现在仍有关联的事	has installed · has chosen · has been chosen

需要注意的发音

“th” 音: theoretical /ˌθi.əˈɹɛt.ɪ.kəl/, smoothen /ˈsmuːðən/
“sh” 和 “zh” 音: transmission /tɹænsˈmɪʃən/, ratio /ˈɹeɪ.ʃoʊ/, conversion /kənˈvɝʒən/, substation /sʌbˈsteɪʃən/, stabilization /ˌsteɪ.bəl.ɪzˈeɪ.ʃən/
长单词——注意重音位置: electrical /ɪˈlɛktɹɪkəl/, stability /stəˈbɪlɪti/, electronics /ɪˌlɛkˈtɹɑ.nɪks/, successfully /səkˈsɛs.fə.li/, electricity /ɪˌlɛkˈtɹɪsɪti/

中文母语者容易读错的音：

/v/ — 不要读成 /w/，上齿轻触下唇: voltage /ˈvəʊltɪd͡ʒ/, convert /kənˈvɝt/, conversion /kənˈvɝʒən/, involve /ɪnˈvɑlv/, overcome /ˌəʊ.vəˈkʌm/
词尾辅音 — 要读清楚，后面不要加元音: grid /ɡɹɪd/, connect /kəˈnɛkt/, voltage /ˈvəʊltɪd͡ʒ/, convert /kənˈvɝt/, circuit /ˈsɝ.kɪt/
/r/ 和 /l/ 的区别: electrical /ɪˈlɛktɹɪkəl/, principle /ˈpɹɪn.sɪ.pəl/, electronics /ɪˌlɛkˈtɹɑ.nɪks/, practical /ˈpɹæk.tɪ.kəl/, electricity /ɪˌlɛkˈtɹɪsɪti/

如何用这段视频练习

先完整听一遍视频，不要开口，记下不认识的单词。
用正常速度逐句跟读，每句重复到你的节奏与说话人一致为止。
录下自己的声音并与原声对比，特别注意 grid, connect, voltage 这类单词。

什么是跟读法？

跟读法 (Shadowing) 是一种有科学依据的语言学习技巧，最初开发用于专业口译员的培训，并由多语言者Alexander Arguelles博士普及。这个方法简单而强大：您在听英语母语原声的同时立即大声重复——就像是一个延迟1-2秒紧跟说话者的影子。与被动听力或语法练习不同，跟读法强迫您的大脑和口腔肌肉同时处理并模仿真实的讲话模式。研究表明它能显着提高发音准确性，语调，节奏，连读，听力理解和口语流利度——使其成为雅思口语备考和真实英语交流最有效的方法之一。

影子跟读法: 阅读完整分步指南 →

跟读练习: 17E058 - Back to Back Stations - 通过视频学习英语口语

Comparing Low Voltage Vs. Medium Voltage Equipment on Solar Sites

12. Parallel Stent Retriever Technique in Mechanical Thrombectomy for Acute Ischemic Stroke

Free CCNA | VLANs (Part 2) | Day 17 | CCNA 200-301 Complete Course

EDFR GWO BTT Training Center - Nicolas Riou Wind

LET THERE BE... Voltage? | Maxwell's Equation #2 Explained for Beginners

What is SMT (Surface Mount Technology)? PCB Assembly (Part 2)

Database Sharding! Designing Data-Intensive Applications chapter 6

Terminal Block Connection Types

Air Conditioning System Basics hvacr how does it work

Parallel Pump Operation

1 Week - Monday: The importance of recycling

Every Hardware Protocol Explained Simply in 10 Minutes!