Shadowing-Übung: Polymers: Crash Course Chemistry #45 - Englisch Sprechen Lernen mit Video
Übungsmodus wählen
Jeder Modus öffnet einen Übungsraum im Vollbild.
108 Sätze
Wenn Sätze zu kurz oder zu lang sind, klicke auf Edit, um sie anzupassen.
1
Charles Darwin was a big fan of billiards. He loved his billiard table.
2
It was one of his prized possessions and one of the most valuable things he owned.
3
Well - not the actual table itself. In fact, it was the balls that were so valuable.
4
Pure ivory carved from the tusks of elephants; only the wealthiest could afford a full set.
5
Luckily he was married to an heiress.
6
A full set of 16 billiard balls would require at least one, possibly two, full elephants worth of ivory.
7
The idea that any bar in the world might contain a billiard table available for anyone to play, and not like run out of the bar with your pockets full of valuable ivory would have sounded insane in 1850.
8
And the billiard industry was well aware of this problem.
9
Billiard balls were getting more expensive, elephants were getting more rare.
10
It was thus not with an environmental motive, that in 1867 the Phelan and Collender Pool Supply Company offered $10,000 to anyone who could come up with a substitute material that worked as well as ivory, but could be produced more quickly and sustainably then dead elephants.
11
An inventor named John Wesley Hyatt took on that challenge.
12
He used nitrocellulose, a flammable solid, created by mixing cotton with nitric acid to create a hard, shiny, white sphere.
13
The properties were extremely similar to ivory billiard balls.
14
The company never gave him the prize.
15
But he did patent the technique, using it to create billiard balls, piano keys and even teeth, becoming pretty dang wealthy in the process.
16
Also he pretty much created the industry that made all of the polymer materials that surround you right now, and that we'll be discussing today in Crash Course Chemistry.
17
Also elephants didn't go extinct, so that's a plus.
18
The polymer that John Hyatt worked on was, somewhat unsurprisingly, kinda crummy.
19
It worked well once it was created, but the manufacturing process was dangerous because nitrated cellulose can explode in a warm breeze.
20
So luckily, some replacements started creeping in.
21
Replacements with some names you probably recognize, like polyvinyl chloride or PVC, bakelite, polystyrene, polyester, and nylon.
22
These are all polymers; huge chains or sometimes 3D networks of repeating organic units called monomers.
23
Each polymer has a monomer, but they're all relatively simple at that basic one unit level.
24
The trick is that they bond to each other on each side potentially forever, though in reality the chains are sometimes hundreds, sometimes thousands, sometimes hundreds of thousands of units long.
25
In order to make a polymer all you need is a molecule that can easily bond to another identical molecule at 2 points.
26
And the simplest of those is ethene, also known as ethylene.
27
It's polymer, you'll be unsurprised to hear is polyethylene, which you've probably heard about.
28
We'll talk more about the specifics in a second, but basically because pi bounds in the double bond are weaker than sigma bonds they can be broken and new monomers can be added.
29
Just to note to avoid confusion: polyethylene has that "-ene" sound in it, right, but it's not an alkene because all those double bonds get broken to form new sigma bonds.
30
It's a polymerized alkene, but the molecule itself is an alkane.
31
It's confusing so I thought it's worth pointing out.
32
Now chemists might want a bunch of different things out of their polymers; maybe they want it to be stretchy, maybe strong, maybe transparent, maybe recyclable.
33
Polyethylene is transparent and thermoplastic, meaning it can be melted and reformed. Making it recyclable.
34
Some other polymers like polyurethane or Bakelite are thermoset.
35
Which means that they change chemically during some kind of curing process and cannot be melted down and reformed.
36
Polyethylene can actually be converted into a thermoset polymer by introducing cross-links, basically molecular bridges between those polymer chains.
37
Any plumbers out there probably have heard of cross-linked ethylene or PEX pipe. Which is what this is.
38
It's extra, super strong because of those cross-links.
39
Polyethylene is also nice because it's strength can be varied by changing the size of the molecules.
40
If they are allowed to polymerize until they are tens of thousands of monomers long, the plastic they will form will be all knotted up in these ultra long chains and it will be extremely strong.
41
That's why this HDPE, high density polyethylene, is a strong bottle.
42
Whereas this is much squishier, this is low density polyethylene.
43
However those ultra long chains also make it much more viscous when heated and thus more difficult to process.
44
It also loses some of its opacity, and becomes more of that milky white color.
45
Now polyethylene is great. It's really great.
46
So great that it's the most common plastic in the world.
47
We produce over 80 million tons of it per year.
48
But we want a lot out of our plastics - strength, color, elasticity, resilience, recyclability - we need everything from saran wrap to car tires.
49
All of these are traits that chemists work tirelessly to create in the early to middle 20th century and continue to work on even today.
50
One of the earliest techniques they used to try and bring out new properties was to change the substituents on the ethylene monomer.
51
Just, see what would happen.
52
Like, what if we swapped out one of the hydrogens for chlorine?
53
Well you get polychloroethene, kinda, that's not what we call it.
54
OK, so remember how benzene when attached to a chain is a phenyl group, and how those two words have nothing to do with each other?
55
Well the same thing goes for the ethene functional group, which is called a vinyl group.
56
It's an old word, super old, it comes from the Greek word for wine.
57
And that is why chloroethene is more commonly called vinyl chloride.
58
And polychloroethene is more commonly called polyvinyl chloride, or PVC.
59
Which is what this little ducky is made out of and also what records are made out of, which is why we call them vinyl.
60
Now what happens when we change out a hydrogen for a methyl group?
61
Well then suddenly this molecule is a propene or, if you are using ye old ways, a propylene.
62
And, yes, if you polymerize it, it becomes polypropylene.
63
If one of the hydrogens is replaced with a phenyl group, well that chemical was first derived from trees in the Styrax family, so it's called styrene.
64
Polymerize it, polystyrene. Make a foam out of it, Styrofoam.
65
Now if you change all four of the hydrogens on the base ethylene with fluorine it becomes tetrafluoroethylene.
66
Polymerize that and instead of hydrogens that polymer is bound entirely to fluorines.
67
Fluorine as we could guess from its spot on the periodic table, love electrons. It is extremely electronegative.
68
But because it holds onto it's electrons so tightly, and is so satisfied in this polymerized chain, the electrons are unavailable for even minimal interactions with any other molecules.
69
I'm not just saying this stuff is super difficult to difficult to react with, or it's really stable.
70
It's more than that the electrons aren't even available for the sort of interactions that make things stick to each other, or cause friction.
71
Which is why you have heard of polymerized tetrafluoroethylene, because it's super useful, either by its abbreviation, PTFE, or by its brand name Teflon.
72
So how do we actually make these things?
73
Well, ethene based polymers form through a process called addition polymerization.
74
The monomers are simply added together and no by products are formed.
75
In order to get the process kicked off you have to introduce a free radical.
76
To me, that always sounded like some crazy freedom-fighter diving into battle without much thought for what would come after he was consumed in the firefight.
77
And, that's kinda what they are. Free radicals are atoms or ions that have a single unpaired electron.
78
This is crazy unstable. It's basically like having half of covalent bond dangling off the atom.
79
Anywhere this can form a bond, it's going to form a bond.
80
And, in the case of addition polymerization it attacks the double bond and joins one of the carbons, while the other carbon is itself left with an unpaired electron.
81
The molecule itself is now a newly formed free radical, and it attack another nearby pi bond, joining with another molecule of ethene, forming another radical.
82
This process continues until two radicals meet each other consuming both free radicals without producing any more, thus, ending polymerization.
83
There are, of course, other sorts of polymerization, as well.
84
Sometimes a hydroxyl group from one molecule is happy to join up with a hydrogen from another, forming water.
85
The water will break away as a byproduct, leaving the two molecules bound together.
86
This often occurs when an amine group, with its loosely held hydrogen, meets a carboxylic acid, with its loosely held -OH group.
87
This is just what happens when hexamethylenediamine meets adipic acid forming another branded polymer, nylon.
88
By dissolving hexamethylenediamine and adipic acid into two different immiscible, or un-mixable, solvents, we actually create nylon right here.
89
The nylon forms at the interface between the two immiscible liquids.
90
And, we can literally grab it and pull it out of the vial, twisting and spooling it until we get a nice glob of nylon.
91
This works because hexamethylenediamine has an amine group on each end and adipic acid has a carboxylic acid on both ends.
92
Thus when the two monomer unit, called a dimer, is formed, there is still a carboxylic acid on one end and an amine group on the other, allowing for further polymerization.
93
These amine acid condensation polymerizations also allow for the creation of possibly the most important polymers on the planet; natural polymers being created inside of youvright now out of monomers that we call amino acids.
94
Did you see that one coming?
95
Amino acids polymerize through condensation reactions guide by the code in your DNA and some very complicated enzymes to form basically you.
96
Other important polymers in your body include: polysaccharides, which we use to store energy; and yeah DNA and RNA, which we use to encode information for the formation of proteins.
97
But that would be back to biology, which is a whole other Crash Course.
98
Which to be clear is available if you'd like to watch it.
99
And thank you for watching this episode of Crash Course Chemistry, in it you learned: That the first commercial polymer ever saved the lives of a lot of elephants.
100
That ethene is sometimes called ethylene.
101
And, that a huge variety of polymers is based on the addition reaction of ethene based monomers, including Teflon.
102
Which so friction-less because of fluorine's extreme electronegativity.
103
You also learned how addition polymerization reactions work.
104
And, that other polymers are formed by condensation reactions.
105
Including the polymerization of amino acids monomers, which along with other polymers like DNA and RNA, and glycogen, make up a lot of the stuff that is you.
106
This episode of Crash Course was written by me, Hank Green, edited by Blake de Pastino, and our chemistry consultant was Dr. Heiko Langner.
107
It was filmed, edited and directed by Nicholas Jenkins. Our script supervisor was Stefan Chin.
108
Our sound designer was Michael Aranda. And, our graphics team is Thought Café.
App herunterladen
Alles, was du zum fließenden Sprechen brauchst
KI-AussprachebewertungJeder Satz bewertet
IPA-TrainingJeden Laut meistern
WortschatzBaue deinen Wortschatz auf
VokabelspielSpielend lernen
📺 Gleicher Kanal
C11
Vectors and 2D Motion: Crash Course Physics #4
Daily ConversationHigh School StudentsUniversity Students
C11
How Water Shapes the Land: Crash Course Geology #9
Daily ConversationUniversity Students
C11
The Civil War, Part I: Crash Course US History #20
Daily ConversationHigh School StudentsUniversity Students
B21
The Bicameral Congress: Crash Course Government and Politics #2
Daily ConversationHigh School StudentsUniversity Students
B21
Crash Course US History Preview
Daily ConversationUniversity Students
C1What's all the Yellen About? Monetary Policy and the Federal Reserve: Crash Course Economics #10
Daily ConversationUniversity Students
C12
The Secret to Business Writing: Crash Course Business - Soft Skills #3
Business EnglishUniversity StudentsWorking Adults
C12
Unit Conversion & Significant Figures: Crash Course Chemistry #2
Daily ConversationHigh School StudentsUniversity Students
B24
How Often do Asteroids Hit the Earth?: Crash Course Geology #20
Daily ConversationHigh School StudentsUniversity Students
C11
What Is Myth? Crash Course World Mythology #1
Daily ConversationUniversity Students
C15
Mesopotamia: Crash Course World History #3
Daily ConversationHigh School StudentsUniversity Students
B210
Crash Course Sex Ed Preview
Daily ConversationUniversity StudentsWorking Adults
C12
Derivatives: Crash Course Physics #2
Daily ConversationUniversity Students
C13
Indus Valley Civilization: Crash Course World History #2
Daily ConversationUniversity Students
B22
Ancient Egypt: Crash Course World History #4
Daily ConversationHigh School StudentsUniversity Students
C12
What is Engineering?: Crash Course Engineering #1
Business EnglishUniversity StudentsWorking Adults
B22
The Persians & Greeks: Crash Course World History #5
Cambridge Exam PrepHigh School StudentsUniversity Students
C12
Supervised Learning: Crash Course AI #2
Business EnglishUniversity StudentsWorking Adults
C1Why Are US Politics Today So Divisive?: Crash Course US Government #1
Daily ConversationUniversity Students
C13
The Periodic Table: Crash Course Chemistry #4
IELTS PrepTOEFL PrepCambridge Exam Prep
✨ Empfohlenes Video
C12
12 Sätze
Plastic Injection Molding
Daily ConversationUniversity StudentsWorking Adults
C13
150 Sätze
The only good nuclear accident
Daily ConversationUniversity StudentsWorking Adults
C11
97 Sätze
Pragmatics: Crash Course Linguistics #6
IELTS PrepTOEFL PrepUniversity Students
C115
107 Sätze
Sheldocracy Is the Only Ethical Solution | Young Sheldon
American AccentIELTS PrepTOEFL PrepCambridge Exam Prep
C14
41 Sätze
The Building Blocks of Everything: Matter & its Properties
IELTS PrepTOEFL PrepUniversity Students
B24
13 Sätze
An unfortunate naming accident
British AccentIELTS PrepTOEFL PrepUniversity Students
C157
10 Sätze
The Next Atomic Bomb Is Made of DNA
IELTS PrepTOEFL PrepUniversity Students
C11
120 Sätze
Philomena Cunk being Philomena Cunk
IELTS PrepTOEFL PrepUniversity Students
C110
54 Sätze
What If It Rains Bananas For A Single Day? (Spoiler: It's Bad)
IELTS PrepTOEFL PrepUniversity Students
C12
222 Sätze
How People Profit Off Pineapple Scraps | World Wide Waste | Business Insider
Business EnglishUniversity StudentsWorking Adults
C11
41 Sätze
WHAT DO PEPTIDES ACTUALLY DO?
IELTS PrepTOEFL PrepUniversity Students
Kontext & Hintergrund
In diesem Video über Polymere wird die interessante Geschichte von John Wesley Hyatt erzählt, der den ersten Kunststoff für Billardkugeln erfand. Dies geschah in einer Zeit, als der Markt für Billardkugeln aufgrund der Seltenheit von Elefanten-Elfenbein immer teurer wurde. Der Fokus liegt auf der chemischen Struktur von Polymeren, den verschiedenen Arten und deren Anwendungen im täglichen Leben. Der Sprecher erklärt auch, wie Chemiker verschiedene Eigenschaften von Polymeren entwickeln, um vielseitigere und nachhaltigere Materialien zu schaffen.
Top 5 Phrasen für die tägliche Kommunikation
- „Polymer“ - bezieht sich auf große Molekülketten, die aus Monomeren bestehen.
- „Thermoplast“ - beschreibt Materialien, die erhitzt und umgeformt werden können.
- „Recycling“ - der Prozess, Materialien wiederzuverwenden.
- „Stärke variieren“ - die Eigenschaften eines Kunststoffs durch Moleküle zu verändern.
- „Quervernetzung“ - Molekulare Brücken, die Polymerketten verbinden und ihre Eigenschaften verändern.
Schritt-für-Schritt Shadowing-Anleitung
Um Ihre Fähigkeiten beim Englisch sprechen üben zu verbessern, können Sie die Technik des Shadowing nutzen, die es Ihnen ermöglicht, den Sprecher zu imitieren und gleichzeitig Ihre Aussprache und Ihr Hörverständnis zu schärfen. Hier ist eine Schritt-für-Schritt-Anleitung, um dies aus dem Video zu lernen:
- Hören Sie aufmerksam zu: Sehen Sie sich das Video mehrmals an und achten Sie auf die Aussprache und den Rhythmus des Sprechers.
- Wählen Sie kurze Abschnitte: Beginnen Sie mit 1-2 Sätzen. Dies erleichtert das Wiederholen und Verstehen.
- Shadow Speech üben: Wiederholen Sie die Sätze laut, während der Sprecher spricht. Konzentrieren Sie sich darauf, die Intonation und den Akzent nachzuahmen.
- Langsame Wiederholung: Spielen Sie die Passagen in verlangsamtem Tempo ab, um die Worte klarer zu hören und nachzusprechen.
- Aufzeichnen und anhören: Nehmen Sie Ihre eigene Stimme auf, während Sie nachsprechen, und hören Sie sich die Aufzeichnung an, um Bereiche zur Verbesserung zu identifizieren.
Diese Methode kann helfen, Ihre Fähigkeiten im Englisch Shadowing erheblich zu verbessern und Ihr Selbstvertrauen beim Englisch sprechen üben zu stärken. Durch die regelmäßige Anwendung von shadowspeaks werden Sie feststellen, dass Sie fließender und sicherer kommunizieren können.
Grammatik in diesem Video
Die Strukturen, die der Sprecher am häufigsten verwendet, mit den genauen Worten aus dem Video:
| Struktur | Im Video |
|---|---|
| Passiv be + Partizip Perfekt – wichtig ist, was geschieht, nicht wer es tut | could be produced · was created · be unsurprised |
| Present Perfect have/has + Partizip Perfekt – eine vergangene Handlung, die jetzt noch wichtig ist | you've probably heard · have heard |
| Relativsätze who / which + Satz – eine Zusatzinformation über eine Person oder Sache | anyone who could · group, which is · biology, which is |
Was ist die Shadowing-Technik?
Shadowing ist eine wissenschaftlich fundierte Sprachlerntechnik, die ursprünglich für die professionelle Dolmetscherausbildung entwickelt und durch den Polyglotten Dr. Alexander Arguelles populär gemacht wurde. Die Methode ist einfach aber wirkungsvoll: Du hörst englisches Audio von Muttersprachlern und wiederholst es sofort laut — wie ein Schatten, der dem Sprecher mit nur 1–2 Sekunden Verzögerung folgt. Anders als passives Hören oder Grammatikübungen zwingt Shadowing dein Gehirn und deine Mundmuskulatur, gleichzeitig echte Sprachmuster zu verarbeiten und zu reproduzieren. Studien zeigen, dass es Aussprachegenauigkeit, Intonation, Rhythmus, verbundene Sprache, Hörverständnis und Sprechflüssigkeit signifikant verbessert — was es zu einer der effektivsten Methoden für die IELTS Speaking-Vorbereitung und reale englische Kommunikation macht.