Shadowing-Übung: What is a Control Valve? - Englisch Sprechen Lernen mit Video

Übungsmodus wählen

Jeder Modus öffnet einen Übungsraum im Vollbild.

47 Sätze
Wenn Sätze zu kurz oder zu lang sind, klicke auf Edit, um sie anzupassen.
1
The control valve receives a signal from a controller, such as a PLC or a DCS, in order to operate.
2
The controller compares the actual flow rate to the desired flow value, called the setpoint.
3
The controller will produce an output to move the valve to bring the flow rate to the setpoint value.
4
A control valve is a power operated device used to regulate or manipulate the flow of fluids,
5
such as gas, oil, water, and steam.
6
It is a critical part of a control loop and is an example of a final control element.
7
The control valve is by far the most common final control element used in industry today.
8
A control valve can be operated electrically, pneumatically, or hydraulically.
9
A control valve receives a signal from a controller, such as a PLC, in order for it to move, resulting in a change in flow.
10
Because the PLC signal is electrical, the control valve may require a device to convert that electrical signal so that it can operate.
11
A control valve has two separate components, the valve and the actuator.
12
Valve bodies are of different types or styles depending on service conditions, piping layout, and desired application.
13
The two classes of control valves are linear motion and rotary motion.
14
On a linear motion valve, the stem and valve movement is up and down.
15
A common type of sliding control valve is the gate valve.
16
A rotary motion valve in almost all cases rotates 90 degrees from open to the closed position.
17
A commonly used rotary valve is the butterfly valve.
18
The actuator is the device connected to the valve through the valve stem that provides the force required to move the valve.
19
As we said earlier, the actuator can be controlled electrically, pneumatically, or hydraulically.
20
The most common and the most reliable is the pneumatic actuator.
21
The control valve receives a signal from a controller, such as a PLC or a DCS, in order to operate.
22
The controller compares the actual flow rate to the desired flow value, called the set point.
23
The controller will produce an output to move the valve to bring the flow rate to the setpoint value.
24
Because of how pneumatic actuators are built, a control valve will fail to a specific position when a loss of the control signal occurs.
25
As the supply air pressure is increased, the rubber diaphragm pushes against the spring and moves the valve stem down into the valve body.
26
As the supply air pressure is reduced, the spring will move the valve stem out of the body.
27
The position to which the control valve is moved if a loss of signal occurs is referred to as the fail-safe mode.
28
The type of fail-safe mode depends on the application for which the control valve is used.
29
The actuator causes the valve to close in a fail-closed control valve.
30
The actuator causes the valve to open in a fail-open control valve.
31
In normal operation, the force of the spring must be overcome by the electrical or pneumatic actuator.
32
In the event of a power failure to the actuator, the electrical or pneumatic force is no longer present, and the spring pressure forces the valve to open.
33
You might wonder how much the valve opens or closes when the flow rate changes.
34
Well, that depends on a number of things, such as the percentage of flow rate change, and the diameter of the pipe.
35
Regardless, the controller must be tuned so that it produces the correct response to any change in flow rate.
36
This is most commonly achieved by using PID control within the PLC or controller.
37
We have already created several easy to follow videos on what a PID controller is.
38
If you want to learn more about this topic, just head on over to realpars.com slash blog.
39
Type in PID in the search bar and all the relevant articles and videos will pop up.
40
We will also put a link in the description if you are watching this on YouTube or any other social media platform.
41
In this video, we have learned
42
that a control valve can vary the flow of a liquid or gas used in a process.
43
We also learned that a control valve can be one of two main types,
44
linear or rotary, and that we can use a fail-safe type of valve in critical areas.
45
Finally, we introduced you to how control valves are controlled by the use of PID instructions in the PLC or DCS system.
46
Want to learn PLC programming in an easy to understand format and take your career to the next level?
47
Head on over to realpars.com Hey!

App herunterladen

Alles, was du zum fließenden Sprechen brauchst

KI-AussprachebewertungJeder Satz bewertet
IPA-TrainingJeden Laut meistern
WortschatzBaue deinen Wortschatz auf
VokabelspielSpielend lernen

Gleicher Kanal

FOR YOU

Empfohlenes Video

Wortschatz und Sprechhinweise zu dieser Lektion

Diese Sprechübung auf Niveau C1 basiert auf dem Video „What is a Control Valve?“. Diese Wörter kommen am häufigsten vor: valve, flow, controller, actuator, Plc. Dieses Video enthält 47 Sätze und 783 Wörter zum Nachsprechen. Der gesprochene Teil dauert 6:00. Der Sprecher spricht gleichmäßig mit etwa 130 Wörtern pro Minute – ein angenehmes Tempo fürs Shadowing. Nur 75 % der Wörter gehören zu den 3.000 häufigsten im Englischen, der Wortschatz ist also anspruchsvoll.

Wichtiger Wortschatz in diesem Video

Die 12 anspruchsvollsten Wörter aus dem Video, mit Aussprache und Bedeutung:

WortAusspracheBedeutung
actuator Substantiv/ˈæk.tjuː.eɪ.tə(ɹ)/Aktor, Aktuator
pneumatic Adjektiv/n(j)uːˈmæ.tɪk/pneumatisch
rotary Adjektiv/ˈɹoʊ.tə.ɹi/rotierbar, rotierend
setpoint Substantiv/ˈsɛtpɔɪnt/Sollwert
hydraulically Adverbhydraulisch
diaphragm Substantiv/ˈdaɪəˌfɹæm/Zwerchfell
rotate Verb/ˈɹoʊ.teɪt/sich drehen, rotieren
manipulate Verb/məˈnɪp.jʊ.leɪt/manipulieren
regulate Verb/ˈɹɛɡ.jə.leɪt/regeln, regulieren
butterfly Substantiv/ˈbʌ.tə(ɹ).flaɪ/Schmetterling, Falter
layout Substantiv/ˈleɪ.aʊt/Einteilung, Struktur
diameter Substantiv/daɪˈæmɪdɚ/Durchmesser, Diameter

Phrasal Verbs, die du hören wirst

WortBedeutung
pop up Verbauftauchen, aufkreuzen

Grammatik in diesem Video

Die Strukturen, die der Sprecher am häufigsten verwendet, mit den genauen Worten aus dem Video:

StrukturIm Video
Passiv be + Partizip Perfekt – wichtig ist, was geschieht, nicht wer es tutcan be operated · can be controlled · are built
Present Perfect have/has + Partizip Perfekt – eine vergangene Handlung, die jetzt noch wichtig isthave already created · have learned

Aussprache, auf die du achten solltest

  • Lange Wörter – auf die Betonung achten: actuator /ˈæk.tjuː.eɪ.tə(ɹ)/, electrically /ɪˈlɛk.tɹɪk.li/, manipulate /məˈnɪp.jʊ.leɪt/, diameter /daɪˈæmɪdɚ/

Laute, die Deutschsprachigen schwerfallen:

  • /æ/ — offener als „ä“: actuator /ˈæk.tjuː.eɪ.tə(ɹ)/, pneumatic /n(j)uːˈmæ.tɪk/, diaphragm /ˈdaɪəˌfɹæm/, diameter /daɪˈæmɪdɚ/

So übst du mit diesem Video

  1. Höre dir das ganze Video einmal an, ohne zu sprechen, und notiere die Wörter, die du nicht kennst.
  2. Sprich Satz für Satz in normaler Geschwindigkeit nach und wiederhole jeden, bis dein Rhythmus zum Sprecher passt.
  3. Nimm dich auf und vergleiche mit dem Original; achte dabei auf Wörter wie actuator, pneumatic, rotary.

Was ist die Shadowing-Technik?

Shadowing ist eine wissenschaftlich fundierte Sprachlerntechnik, die ursprünglich für die professionelle Dolmetscherausbildung entwickelt und durch den Polyglotten Dr. Alexander Arguelles populär gemacht wurde. Die Methode ist einfach aber wirkungsvoll: Du hörst englisches Audio von Muttersprachlern und wiederholst es sofort laut — wie ein Schatten, der dem Sprecher mit nur 1–2 Sekunden Verzögerung folgt. Anders als passives Hören oder Grammatikübungen zwingt Shadowing dein Gehirn und deine Mundmuskulatur, gleichzeitig echte Sprachmuster zu verarbeiten und zu reproduzieren. Studien zeigen, dass es Aussprachegenauigkeit, Intonation, Rhythmus, verbundene Sprache, Hörverständnis und Sprechflüssigkeit signifikant verbessert — was es zu einer der effektivsten Methoden für die IELTS Speaking-Vorbereitung und reale englische Kommunikation macht.

Shadowing-Technik: die vollständige Schritt-für-Schritt-Anleitung lesen →