Shadowing Practice: What is a Control Valve? - Learn English Speaking with Video

Kies een oefenmodus

Elke modus opent een volledig scherm oefenruimte.

47 zinnen
Als zinnen te kort of te lang zijn, klik op Bewerken om ze aan te passen.
1
The control valve receives a signal from a controller, such as a PLC or a DCS, in order to operate.
2
The controller compares the actual flow rate to the desired flow value, called the setpoint.
3
The controller will produce an output to move the valve to bring the flow rate to the setpoint value.
4
A control valve is a power operated device used to regulate or manipulate the flow of fluids,
5
such as gas, oil, water, and steam.
6
It is a critical part of a control loop and is an example of a final control element.
7
The control valve is by far the most common final control element used in industry today.
8
A control valve can be operated electrically, pneumatically, or hydraulically.
9
A control valve receives a signal from a controller, such as a PLC, in order for it to move, resulting in a change in flow.
10
Because the PLC signal is electrical, the control valve may require a device to convert that electrical signal so that it can operate.
11
A control valve has two separate components, the valve and the actuator.
12
Valve bodies are of different types or styles depending on service conditions, piping layout, and desired application.
13
The two classes of control valves are linear motion and rotary motion.
14
On a linear motion valve, the stem and valve movement is up and down.
15
A common type of sliding control valve is the gate valve.
16
A rotary motion valve in almost all cases rotates 90 degrees from open to the closed position.
17
A commonly used rotary valve is the butterfly valve.
18
The actuator is the device connected to the valve through the valve stem that provides the force required to move the valve.
19
As we said earlier, the actuator can be controlled electrically, pneumatically, or hydraulically.
20
The most common and the most reliable is the pneumatic actuator.
21
The control valve receives a signal from a controller, such as a PLC or a DCS, in order to operate.
22
The controller compares the actual flow rate to the desired flow value, called the set point.
23
The controller will produce an output to move the valve to bring the flow rate to the setpoint value.
24
Because of how pneumatic actuators are built, a control valve will fail to a specific position when a loss of the control signal occurs.
25
As the supply air pressure is increased, the rubber diaphragm pushes against the spring and moves the valve stem down into the valve body.
26
As the supply air pressure is reduced, the spring will move the valve stem out of the body.
27
The position to which the control valve is moved if a loss of signal occurs is referred to as the fail-safe mode.
28
The type of fail-safe mode depends on the application for which the control valve is used.
29
The actuator causes the valve to close in a fail-closed control valve.
30
The actuator causes the valve to open in a fail-open control valve.
31
In normal operation, the force of the spring must be overcome by the electrical or pneumatic actuator.
32
In the event of a power failure to the actuator, the electrical or pneumatic force is no longer present, and the spring pressure forces the valve to open.
33
You might wonder how much the valve opens or closes when the flow rate changes.
34
Well, that depends on a number of things, such as the percentage of flow rate change, and the diameter of the pipe.
35
Regardless, the controller must be tuned so that it produces the correct response to any change in flow rate.
36
This is most commonly achieved by using PID control within the PLC or controller.
37
We have already created several easy to follow videos on what a PID controller is.
38
If you want to learn more about this topic, just head on over to realpars.com slash blog.
39
Type in PID in the search bar and all the relevant articles and videos will pop up.
40
We will also put a link in the description if you are watching this on YouTube or any other social media platform.
41
In this video, we have learned
42
that a control valve can vary the flow of a liquid or gas used in a process.
43
We also learned that a control valve can be one of two main types,
44
linear or rotary, and that we can use a fail-safe type of valve in critical areas.
45
Finally, we introduced you to how control valves are controlled by the use of PID instructions in the PLC or DCS system.
46
Want to learn PLC programming in an easy to understand format and take your career to the next level?
47
Head on over to realpars.com Hey!

App downloaden

Alles wat je nodig hebt om vloeiend te spreken

AI UitspraakScoor elke zin
IPA OefeningBeheers elk geluid
WoordenschatBouw je woordenschat op
WoordenspelLeren terwijl je speelt

Zelfde Kanaal

FOR YOU

Aanbevolen Video

Woordenschat en spreektips bij deze les

Deze spreekles op niveau C1 is gebaseerd op de video “What is a Control Valve?”. Deze woorden komen het vaakst terug: valve, flow, controller, actuator, Plc. Deze video bevat 47 zinnen en 783 woorden om na te spreken. Het gesproken deel duurt 6:00. De spreker praat in een gelijkmatig tempo van ongeveer 130 woorden per minuut, prettig om te shadowen. Slechts 75% van de woorden hoort bij de 3.000 meest gebruikte Engelse woorden, dus de woordenschat is pittig.

Belangrijke woorden in deze video

De 8 moeilijkste woorden uit de video, met uitspraak en betekenis:

WoordUitspraakBetekenis
pneumatic bijvoeglijk naamwoord/n(j)uːˈmæ.tɪk/pneumatisch
diaphragm zelfstandig naamwoord/ˈdaɪəˌfɹæm/middenrif
rotate werkwoord/ˈɹoʊ.teɪt/roteren, ronddraaien
manipulate werkwoord/məˈnɪp.jʊ.leɪt/manipuleren
regulate werkwoord/ˈɹɛɡ.jə.leɪt/regelen
butterfly zelfstandig naamwoord/ˈbʌ.tə(ɹ).flaɪ/vlinder, kapel
layout zelfstandig naamwoord/ˈleɪ.aʊt/indeling
diameter zelfstandig naamwoord/daɪˈæmɪdɚ/middellijn, diameter

Phrasal verbs die je zult horen

WoordBetekenis
pop up werkwoordopduiken, te voorschijn komen

Grammatica in deze video

De structuren die de spreker het meest gebruikt, met de exacte woorden uit de video:

StructuurIn de video
Lijdende vorm be + voltooid deelwoord — het gaat om wat er gebeurt, niet om wie het doetcan be operated · can be controlled · are built
Present perfect have/has + voltooid deelwoord — iets uit het verleden dat nu nog telthave already created · have learned

Uitspraak om op te letten

  • Lange woorden — let op de klemtoon: actuator /ˈæk.tjuː.eɪ.tə(ɹ)/, electrically /ɪˈlɛk.tɹɪk.li/, manipulate /məˈnɪp.jʊ.leɪt/, diameter /daɪˈæmɪdɚ/

Klanken die Nederlandstaligen lastig vinden:

  • /æ/ — opener dan de Nederlandse “e”: actuator /ˈæk.tjuː.eɪ.tə(ɹ)/, pneumatic /n(j)uːˈmæ.tɪk/, diaphragm /ˈdaɪəˌfɹæm/, diameter /daɪˈæmɪdɚ/

Zo oefen je met deze video

  1. Luister de hele video één keer zonder te spreken en noteer de woorden die je niet kent.
  2. Spreek zin voor zin na op normale snelheid en herhaal elke zin tot je ritme gelijk is aan dat van de spreker.
  3. Neem jezelf op en vergelijk met het origineel; let daarbij op woorden als pneumatic, diaphragm, rotate.

Wat is de Shadowing-techniek?

Shadowing is een wetenschappelijk onderbouwde taalleermethode die oorspronkelijk is ontwikkeld voor professionele tolkentraining en gepopulariseerd door polyglot Dr. Alexander Arguelles. De methode is eenvoudig maar krachtig: je luistert naar native Engelse audio en herhaalt het onmiddellijk hardop — als een schaduw die de spreker volgt met slechts 1–2 seconden vertraging. In tegenstelling tot passief luisteren of grammaticadrills, dwingt shadowing je hersenen en mondspieren om echte spraakpatronen tegelijkertijd te verwerken en te reproduceren. Onderzoek toont aan dat het de uitspraaknauwkeurigheid, intonatie, ritme, verbonden spraak, luisterbegrip en spreekvaardigheid aanzienlijk verbetert — waardoor het een van de meest effectieve methoden is voor IELTS Speaking-voorbereiding en echte Engelse communicatie.

Shadowing-techniek: lees de volledige stap-voor-stap-gids →