शैडोइंग अभ्यास: An Introduction to Flashover - Episode 9 - वीडियो के साथ अंग्रेजी बोलना सीखें
अभ्यास मोड चुनें
हर मोड पूरी स्क्रीन का अभ्यास कक्ष खोलता है।
182 वाक्य
यदि वाक्य बहुत छोटे या लंबे हों, तो समायोजित करने के लिए Edit पर क्लिक करें।
1
G'day everyone my name is Matt and welcome back to The Fire Show.
2
So far in the series we've covered a range of different topics including the fact that smoke burns, pyrolysis, formability range, spontaneous combustion and heat transfer.
3
In today's episode we're going to be talking about flashover which is a combination of all of these elements.
4
So if you haven't seen those videos I suggest you go back
5
and have a quick look at them first and then come back to this one.
6
Now flashover is a term that gets thrown around a lot by firefighters
7
and sometimes it gets used correctly and sometimes it gets used incorrectly.
8
Now, without wanting to get too bogged down in the specifics of terminology,
9
we're going to have a quick look at what the actual term flashover is referring to
10
and then we're going to have a look at how it actually occurs
11
and what we can do to start reading it
12
and what we can do to actually stop it from occurring in the first place.
13
Now, a textbook example of flashover is the transition from a localised fire to the general conflagration within the compartment
14
when all fuel surfaces are burning.
15
and if you're wondering what conflagration means it's basically just a fancy word for fire
16
if we wanted a much simpler definition for flashover we could say
17
it's the transition from a fire within a room to a room
18
that is entirely on fire now for an example of
19
that transition what we have is a fire burning in the corner of the room here
20
and as that fire begins to grow it pumps more
21
and more heat and flames and smoke into that overpressure above the fire
22
and this is really important because as
23
that smoke layer begins to build up
24
it radiates a of heat back down on all the fuels in the room
25
and as all of those fuels begin to heat up they get closer
26
and closer to their auto ignition temperature until a point where everything in
27
that room catches on fire at around about the same time and we see what's called a flashover
28
so what we're going to do is go ahead
29
and talk about how this actually happens
30
and how we can begin to read the signs that are actually indicating that a flashover is imminent
31
and in fact what we can actually do about it now
32
flashover is no different to any other fire where it actually relies on a combination of heat,
33
fuel, oxygen and a chemical reaction so it can actually occur.
34
But if we think about it in these terms, it does make flashover easier to understand.
35
Now if we have a look at this room, we can see that the fuel is coming from the couch
36
and the TV and the carpet and the walls and those kinds of things.
37
The oxygen is already present in the room when the fire starts, it's coming from the air that's already present in the room,
38
and in fact it's coming from the air that's being drawn in through the door as the fire burns.
39
now the heat actually comes from the fire itself
40
and as it starts to burn it pushes more heat
41
and smoke and flame up into that over pressure area
42
and by the process of convection that heat spreads out across the room
43
and can actually start to move into other rooms because
44
that convection current takes hold
45
and what we actually see is cold air being drawn in through the door
46
while smoke will actually start to push out through the top of the door and
47
while this process is actually happening what we're seeing is a
48
lot of heat being radiated back down on everything in the room
49
which is slowly starting to heat all of these things up
50
and in fact for most fuels approximately 30 percent of the
51
heat liberated in the flame is radiated to the environment
52
and the rest is actually dispersed convectively in the buoyant flume now this actually means
53
that around about 70 of the heat produced by the fire is actually being transported by the convection current
54
which means that 70 % of the heat is actually being moved up
55
and away from the fire and is therefore available to actually heat up other objects throughout
56
that room and throughout the building
57
so as the convection current moves through the building it radiates heat down on all of the fuels
58
that are confined within that area
59
and as those fuels begin to heat up they then start to pyrolysis
60
and the fuels will start to pyrolysis at different temperatures depending on what they're made of for instance
61
if it's a natural fiber, it's going to pyrolicize at a much higher temperature than if it's an artificial fuel,
62
such as a plastic or a foam.
63
Now, as they start to pyrolicize, they're releasing more and more fuel into that atmosphere, which is then available for the fire to burn.
64
Now, some studies have shown that at a ceiling temperature of approximately 600 degrees centigrade, flashover can occur.
65
And a reason for this can be found in the auto -ignition temperature for carbon monoxide, which is about 609 degrees so as we're seeing
66
that ceiling temperature get up to around about
67
that 600 degree level we're seeing the carbon monoxide in the smoke spontaneously combust
68
which then increases the heat release rate greatly
69
and then we see a rapid progress towards flashover as a result
70
now this is actually an early warning sign for flashover flames in the overpressure region is actually showing
71
that we're reaching that 600 degrees and
72
that flashover isn't very far away now the next thing we start to see is all of our fuels
73
which are pyrolysis are starting to reach their auto ignition temperature which means
74
that we're getting very close to the point where all of
75
those pyrolysis gases are simply going to burst into flames on their own accord even
76
if there is no direct flame impinging from the fire itself
77
now this is where the fire triangle comes back into it
78
because if we don't have our mixture of heat fuel
79
and oxygen we simply can't get the chemical reaction
80
that starts our flashover now in the room we know
81
that we have our heat because our ceiling temperature is reaching around about
82
that 600 degrees level we're seeing the flames in
83
that overpressure our fuel is everywhere it's been readily pyrolysis by the fire
84
and we're seeing all of our couches and walls and floors
85
and all these sorts of things releasing all of these pyrolysis gases
86
so the the final variable is oxygen now oxygen is something
87
that is very variable within a structure fire whether the fire is in a fuel controlled
88
or a ventilation controlled state we're going to be talking about fuel controlled
89
and ventilation controlled more in a later episode but it's important to note
90
that oxygen is a really key component to a structure fire actually occurring
91
and a lack of oxygen can actually stop a flashover happening
92
altogether whereas the addition of more oxygen can actually cause flashover to happen faster
93
and this is why it's really important that
94
when we actually make entry to a building we do so
95
when we're ready to actually get in and apply water to
96
that fire without actually allowing it to get in excess of oxygen before we actually suppress that fire.
97
Now our fire has continued to burn and we're seeing more
98
and more of these pyrolysis gases starting to come out of our fuels
99
and we're also starting to see more and more of
100
that flame activity above the overpressure which is indicating
101
that it's at least 600 degrees
102
now the next step is we're going to start to see these fuels reach their auto ignition temperature
103
and they're going to spontaneously combust
104
now they're not necessarily going to do it all at the same time we're going to see the objects
105
that are more vulnerable or higher in the room
106
spontaneously combust first then we're very quickly going to see the others spontaneously combust
107
and we're going to see that transition from the fire within a room to a room
108
that is entirely on fire and this is what we refer to as flashover it's
109
that transition from a fire within a room which is feeding
110
that convection current to a room that is entirely on fire
111
and that's where we see our heat release rate increase rapidly to a very large extent
112
and in fact after flashover has occurred temperatures of 900 to 1100 degrees celsius can be reached throughout the room
113
now after flashover has occurred there is a lot more heat being generated from the fire
114
because there's simply a lot more fire being created
115
because we've got an entire room that's on fire rather than just a small section of that room.
116
Now the result of which is all of these fire gases
117
and all of this heat have to go somewhere and
118
so they're going to be heading out of whatever openings they can find
119
and generally that's going to be a door or a window
120
and you can see here that once our room is flashed over all
121
that heat that's being generated quickly starts to heat up the next room and then the room after that.
122
So flashover isn't a single occurrence.
123
What we actually see in a house fire is one room will flash over
124
and then another and then another
125
and all of this of course is based on how much air
126
that is available to allow that combustion process to fully oxidize those fuels.
127
Now this means that flashover really does rely on the three sides of the fire triangle,
128
meaning we really need that heat to be radiating down on our fuels
129
so that they can start to pyrolysis and reach their auto -ognition temperature.
130
We also need the oxygen to allow that combustion process to occur
131
and of course we need the fuel because without the fuel itself there's nothing for this process to affect.
132
Now
133
if we were to talk about some important signs of flashover
134
we will be talking about a lowering of the neutral plane
135
or that smoke layer as some people will call it we're going to be seeing
136
that smoke layer become more and more unstable in the process as well
137
because it's going to be needing to try
138
and even itself out between the hot overpressure gases and the cold or under pressure gases as the air comes in
139
we're going to be seeing objects
140
and surfaces around the room start to emit pyrolysis gases as they heat up
141
and break down and this is a really late sign as well
142
if there's things pyrolysis around the room you know
143
that they're being heated to a really extreme extent and that flashover isn't far away.
144
We've also talked about flames in the overpressure and we know
145
that that's a really late indicator that flashover isn't far away
146
and it's really important that
147
if we're seeing those flames in the overpressure
148
we cool those gases down otherwise we're going to start to see a really rapid progression to flashover.
149
Now of course with those really high temperatures above the neutral plane
150
we're also going to be getting some really intense and painful radiant heat.
151
So if we're in a fire and being force down by the heat, that's a really good indicator that flashover isn't far away
152
and we really need to cool those gases down so
153
that we can try to create a safer environment for ourselves to work in.
154
And while cooling these gases down is really important to ensure
155
that we can actually maintain our environment and actually have a safer working environment
156
while we try and make our way to the fire, once we reach the fire we need to make sure
157
that we attack it in an aggressive manner because the longer we leave it,
158
the more it's going to be able to pump out these hot fire gases
159
and the more that
160
that convection current is going to be pushing hot fire gases throughout the building
161
and radiating heat down on all of the fuels and allowing that fire to progress
162
so now we've seen how flashover works and we know what some of the signs are
163
I'm just going to play a video
164
so we can actually follow a fire all the way through from a developing fire all the way through to flashover.
165
And we'll actually see quite a lot of these indicators as we go through.
166
Now bearing in mind outside the box is quite windy
167
so we actually do struggle to get a nice stable neutral plane and a number of points of this fire.
168
But that's just because the box is really quite small and it was a fairly windy day.
169
Transcription by CastingWords Thank you.
170
We'll be right back.
171
Thank you.
172
Transcription by CastingWords Thank you.
173
All right, so now we've seen how flashover works, and we've also seen that it's not really a rare occurrence.
174
In fact, it happens at pretty well every structure fire that continues on to being fully involved.
175
We've also seen that it's not just one flashover.
176
In fact, that each and every room in that house or the building can actually flashover, which is why it's really important that as firefighters,
177
when we're entering into these buildings, we're actually looking for the signs of flashover so
178
that we can predict the fire's growth and actually act accordingly and actually suppress that fire while keeping ourselves safe.
179
And it's only through regular training
180
that we're actually going to get used to actually looking for these signs and then acting accordingly.
181
Alright well that's it for this one thanks very much for watching and I'll catch you in the next one.
182
Bye!
ऐप डाउनलोड करें
धाराप्रवाह बोलने के लिए ज़रूरी सब कुछ
AI उच्चारण स्कोरहर वाक्य का स्कोर
IPA अभ्यासहर ध्वनि में महारत
शब्दावलीअपना शब्द भंडार बनाएँ
शब्द गेमखेलते हुए सीखें
FOR YOU
अनुशंसित वीडियो
C12
111 वाक्य
The Craziest Ways Ancient Humans Made Fire #AncientHumans #History #Survival
Daily ConversationUniversity StudentsWorking Adults
C11
95 वाक्य
What Happens When You Die?
Daily ConversationUniversity StudentsWorking Adults
C11
177 वाक्य
Prof Robert Pape: THE FIRE SEASON BEGINS
Daily ConversationUniversity StudentsWorking Adults
C14
302 वाक्य
Real English Conversations to Learn English (Advanved) | Improve Your English FAST!
Daily ConversationUniversity StudentsWorking Adults
C11
284 वाक्य
Why do people smoke?
Daily ConversationUniversity StudentsWorking Adults
C12
128 वाक्य
Fire Pump Monthly Churn Test
Daily ConversationWorking Adults
C11
652 वाक्य
Can We Live Forever? – A Question of Science with Brian Cox
Daily ConversationUniversity StudentsWorking Adults
C12
78 वाक्य
Vanishing & Exploding Gradient explained | A problem resulting from backpropagation
Daily ConversationUniversity Students
B22
83 वाक्य
How to Deal With ADHD BURNOUT
Daily ConversationUniversity StudentsWorking Adults
B22
168 वाक्य
The Truth About Nuclear Energy
Daily ConversationUniversity StudentsWorking Adults
B11
13 वाक्य
English in a Minute: Put Out Fires
American AccentBusiness EnglishDaily ConversationUniversity Students
C11
166 वाक्य
Introduction to Optoelectronics and Photonics
Daily ConversationUniversity Students
इस पाठ की शब्दावली और बोलने के सुझाव
यह स्पीकिंग पाठ वीडियो “An Introduction to Flashover - Episode 9” पर आधारित है। सबसे ज़्यादा दोहराए गए शब्द ये हैं: flashover, heat, fuel, gases, temperature। इस वीडियो में शैडोइंग के लिए 182 वाक्य और 2333 शब्द हैं। बोला गया हिस्सा 14:07 लंबा है। वक्ता लगभग 165 शब्द प्रति मिनट की स्वाभाविक गति से बोलता है, जो रोज़मर्रा की बातचीत के करीब है। 85% शब्द अंग्रेज़ी के 3,000 सबसे आम शब्दों में से हैं; बाकी शब्द अभ्यास से पहले देख लेना अच्छा रहेगा।
इस वीडियो की मुख्य शब्दावली
वीडियो के 15 सीखने लायक शब्द, उच्चारण और अर्थ के साथ:
| शब्द | उच्चारण | अर्थ |
|---|---|---|
| oxygen संज्ञा | /ˈɑksɪd͡ʒən/ | जारक, ऑक्सीजन |
| flame संज्ञा | /fleɪm/ | लौ, ज्वाला |
| occur क्रिया | /əˈkɜː/ | बीतना |
| automobile संज्ञा | /ˈɔː.tə.məˌbil/ | मोटरवाहन, गाड़ी |
| layer संज्ञा | /ˈleɪ̯ɚ/ | परत, तह |
| neutral विशेषण | /ˈnuː.tɹəl/ | तटस्थ |
| ceiling संज्ञा | /ˈsilɪŋ/ | छत |
| extent संज्ञा | /ɪkˈstɛnt/ | विस्तार |
| indicate क्रिया | /ˈɪndɪˌkeɪt/ | सूचित करना, संकेत करना |
| pump संज्ञा | /pʌmp/ | पंप, पम्प |
| generate क्रिया | /ˈd͡ʒɛn.ə.ɹeɪt/ | उपजाना |
| triangle संज्ञा | /ˈtɹaɪˌæŋɡəl/ | त्रिकोण, त्रिभुज |
| occurrence संज्ञा | /əˈkɜɹ.əns/ | घटना, परिघटना |
| windy विशेषण | /ˈwɪn.di/ | तूफ़ानी, हवादार |
| topic संज्ञा | /ˈtɑpɪk/ | प्रसंग, विषय |
वीडियो में आने वाली फ़्रेज़ल वर्ब
| शब्द | उच्चारण | अर्थ |
|---|---|---|
| go ahead क्रिया | /ˌɡoʊ əˈhɛd/ | आगे बढ़ना |
इस वीडियो का व्याकरण
वक्ता जिन संरचनाओं का सबसे अधिक प्रयोग करता है, वीडियो के असली शब्दों के साथ:
| संरचना | वीडियो में |
|---|---|
| Present perfect have/has + past participle — बीता हुआ काम जिसका असर अभी भी है | we've covered · haven't seen · have shown |
| Passive voice be + past participle — ज़ोर इस पर कि क्या होता है, न कि कौन करता है | being drawn · being radiated · is radiated |
| Relative clauses who / which + उपवाक्य — व्यक्ति या वस्तु के बारे में अतिरिक्त जानकारी | flashover which is · atmosphere, which is · monoxide, which is |
ध्यान देने योग्य उच्चारण
वक्ता 54 बार संक्षिप्त रूपों का प्रयोग करता है, जैसे we're, we've, they're। इन्हें वैसे ही छोटा बोलें जैसा आप सुनते हैं।
- “sh” और “zh” की ध्वनियाँ: transition /tɹænˈzɪʃ.ən/, ignition /ɪɡˈnɪʃən/, flash /flæʃ/, ventilation /ˌvɛntɪˈleɪʃ(ə)n/, transcription /tɹænˈskɹɪpʃən/
- लंबे शब्द — बलाघात सही रखें: automobile /ˈɔː.tə.məˌbil/, indicator /ˈɪn.dɪˌkeɪ.tə(ɹ)/, accordingly /əˈkɔɹ.dɪŋ.li/, ventilation /ˌvɛntɪˈleɪʃ(ə)n/, necessarily /ˌnɛs.əˈsɛɹ.ə.li/
हिंदी भाषियों के लिए मुश्किल ध्वनियाँ:
- /v/ और /w/ का फ़र्क़ — /v/ में ऊपर के दाँत निचले होंठ को छूते हैं, /w/ में होंठ गोल होते हैं: variable [ˈvæɹ.i.ə.bl̩], ventilation /ˌvɛntɪˈleɪʃ(ə)n/, windy /ˈwɪn.di/, whereas /(h)wɛɹˈæz/, aggressive /əˈɡɹɛs.ɪv/
- /z/ — इसे “ज” (/dʒ/) न बनाएँ: transition /tɹænˈzɪʃ.ən/, whereas /(h)wɛɹˈæz/, oxidize /ˈɒksɪdaɪz/
- शब्द की शुरुआत में s + व्यंजन — पहले “इ” न जोड़ें: stable /ˈsteɪ.bəl/, spontaneous /spɑnˈteɪ.ni.əs/, spontaneously /spɑnˈteɪ.ni.əs.li/
इस वीडियो से अभ्यास कैसे करें
- पहले बिना बोले पूरा वीडियो एक बार सुनें और जो शब्द नहीं आते उन्हें लिख लें।
- 0.75× गति से शुरू करें, एक-एक वाक्य की शैडोइंग करें, और सहज लगने पर सामान्य गति पर लौटें।
- अपनी आवाज़ रिकॉर्ड करें और मूल से तुलना करें, ख़ासकर oxygen, flame, occur जैसे शब्दों पर ध्यान दें।
शैडोइंग तकनीक क्या है?
शैडोइंग (Shadowing) एक विज्ञान-समर्थित भाषा सीखने की तकनीक है जो मूल रूप से पेशेवर दुभाषिया प्रशिक्षण के लिए विकसित की गई थी। विधि सरल लेकिन शक्तिशाली है: आप मूल अंग्रेज़ी ऑडियो सुनते हैं और तुरंत इसे ज़ोर से दोहराते हैं — जैसे वक्ता की छाया 1-2 सेकंड की देरी से। शोध से पता चलता है कि यह उच्चारण सटीकता, स्वर, लय, जुड़ी हुई ध्वनियाँ, सुनने की समझ और बोलने की प्रवाहशीलता में काफ़ी सुधार करता है।