शैडोइंग अभ्यास: LET THERE BE... Voltage? | Maxwell's Equation #2 Explained for Beginners - वीडियो के साथ अंग्रेजी बोलना सीखें
अभ्यास मोड चुनें
हर मोड पूरी स्क्रीन का अभ्यास कक्ष खोलता है।
279 वाक्य
यदि वाक्य बहुत छोटे या लंबे हों, तो समायोजित करने के लिए Edit पर क्लिक करें।
1
What's up you lot, Parth here and today I'm going to be talking about one of Maxwell's four equations of electromagnetism.
2
Now, I've already made a video about one of them in the past and you guys seem to enjoy it, so check it out up here if you haven't seen it already.
3
Although don't worry, you don't need to have seen it to understand what I'm going to be talking about in this one.
4
But still go and check it out if you haven't already, it's actually quite a good video if I do say so myself.
5
Anyway, let's get into it.
6
Well, no, hang on, I can't do that yet.
7
I have to say first of all, Thank you so much for 7,000 subscribers.
8
That is ridiculous.
9
We are well on our way to 10k, which is, you know, pretty cool.
10
So thank you so much if you've subscribed already.
11
And if you haven't, then please do consider it, depending on whether or not you like this video.
12
So without further ado, let's get into the video so you can figure out whether or not you like it.
13
So if you don't know, Maxwell's equations are a series of four equations compiled by James Clerk Maxwell that describe everything to do with electricity and magnetism,
14
collectively known as electromagnetism.
15
Now, in the previous video I made about Maxwell's equations, which I linked up there earlier, I discussed one of the four Maxwell equations, and that one dealt with the fact that there is no such thing as a magnetic monopole.
16
And as a consequence of this, we discussed the idea that magnetic field lines must not have a start or an end point.
17
They must be closed loops.
18
Now that sounds relatively complicated, especially if you don't know what any of that means, but I tried to make it as easy to understand for somebody who's never seen this kind of stuff before.
19
So that's what I'm going to be trying to do in this video as well.
20
Now, the reason that I brought up the previous video is because in that one I used differential notation.
21
I discussed what these little upside down triangles mean.
22
However, some of you in the comments said
23
that you would like to see the next Maxwell equation discussed in the integral form, which looks a little bit something like this for the previous one that I discussed.
24
And that actually really helps me out because the differential notation
25
and the integral notation are just two different ways of writing exactly the same thing.
26
They're just two ways of looking at the same thing from different angles.
27
And the reason that your request helps me out is because, well, the equation that we're going to be looking at today is actually much easier to discuss in integral notation.
28
So thank you for that.
29
Okay, so the equation that we're looking at today is this one.
30
This is what it looks like, and hopefully by the end of the video, we'll be able to understand exactly what all of the symbols in this equation mean.
31
So let's start with this S-shaped symbol, which we can see on both sides of the equation.
32
It's known as the integral symbol.
33
Some of you will have seen this symbol already from your studies of calculus, but if you haven't already seen the symbol, then let's quickly go over what it means.
34
To do this, let's first imagine that we're dealing with a mathematical function.
35
Let's say we're dealing with y is equal to x, one of the simplest functions that we can think of.
36
This function is such that whatever the x value at a particular point along that line, the y value is exactly the same as the x value.
37
And this is true along the entire length of the line.
38
So that's why the function is known as y is equal to x, because on that line, at every point, the y value is exactly the same as the x value.
39
Now let's imagine that for some reason we want to try
40
and find the area underneath this line and above the horizontal or x axis.
41
And we want to do this between x is equal to 0 and a specific value of x.
42
Let's say x is equal to 10.
43
So now what we've drawn is a shaded triangle.
44
So we can work out this shaded triangle's area by recalling how to calculate the area of a triangle.
45
We can remember that the area of a triangle is found by multiplying half by the base by the height.
46
Now we know that the base of the triangle is 10 units long
47
because we're calculating the area of the triangle from x is
48
equal to 0 all the way to x is equal to 10.
49
However, we don't immediately know the height of the triangle, but we kind of do.
50
Because we know that the function we were dealing with is y is equal to x.
51
Therefore if we pick any point on the line, and in this case we'll pick the most convenient one, then we know that the x value is equal to the y value.
52
This means that if we pick the point where x is equal to 10, then y must also be equal to 10.
53
Therefore we can see that the height of the triangle is 10 units.
54
And in doing so we can calculate the area of the triangle as half multiplied by the base, which is 10, multiplied by the height, which is also 10.
55
And that ends up being 50 units squared.
56
Now this is easy enough, right?
57
But this kind of stuff only works with relatively simple functions, such as y is equal to x.
58
What do we do in a situation where we've got a more complicated function?
59
Let's say y is equal to x squared.
60
Now this curve, y is equal to x squared, is defined in such a way that whatever the x value is at a certain point on the curve, the y value is that x value squared.
61
That's why it's known as y is equal to x squared.
62
For example, if we take the point x is equal to 2, then on the curve, y is equal to 4.
63
And if we take the value x is equal to 5, then on the curve y is equal to 25.
64
So coming back to what we were trying to do earlier, let's now try and find the area underneath the curve above the horizontal axis
65
and between x is equal to 0 and x is equal to 10.
66
Now we don't have a triangle anymore, so it's not quite as simple as it was before.
67
In fact, we've got this whole curvy bit, right?
68
That's what's preventing us from calculating just the area of a triangle.
69
However, we could calculate the area of this triangle
70
that I've drawn in right now and just say that this is an estimate of the actual area.
71
Admittedly, it's a pretty poor estimate and it's an overestimate of the actual area
72
because we're also saying that the area under the function includes this shaded bit here, when in reality it doesn't.
73
So we've overestimated the area.
74
Now, a way to improve our estimate is to not say
75
that the area is a triangle but rather divide up the area under the curve into trapezia.
76
Then what we can do is to find out the area of each trapezium
77
and add it up all together to find the area underneath the curve
78
or at least an estimate of the area underneath the curve.
79
Now the reason
80
that this is still an estimate of the area albeit a better one than before is
81
because we have straight lines at the top of each trapezium rather than the curve
82
which is what we'd have if we had exactly the area that we're trying to find. But anyway, so the way to find the area of each trapezium is
83
to multiply the base length of the trapezium by the height exactly down the middle of the trapezium.
84
And we can do this for each different trapezium
85
and then add up all the areas to find a better estimate of the area underneath the curve.
86
Now, another thing that we're going to do is to call the base of each trapezium dx.
87
This is just a notation thing, but it'll become clear why we do this in a minute.
88
So don't worry about why it's called dx.
89
It's just that's what we're going to call that length.
90
And so essentially what we're doing is dividing the area
91
that we're trying to find into trapezia such
92
that the base length of each trapezium is the same as the base length of every other trapezium.
93
Each trapezium has a base length of dx.
94
Then we can work out the middle height of let's say the first trapezium.
95
So we can say
96
that the center of the base of the trapezium has a x coordinate x1
97
and then we can follow it up to the curve
98
and we can work out what the y value is
99
because we know that y on the curve is equal to x squared.
100
So the area of the first trapezium is the base dx multiplied by the middle height which is x1 squared.
101
The area of the second trapezium is dx multiplied by x2 squared.
102
The area of the third trapezium is dx multiplied by x3 squared and so on and so forth.
103
And to find an estimate for the total area underneath the curve we add up all of these areas.
104
So we get dx multiplied by x1 squared plus dx multiplied by x2 squared plus so on and so forth.
105
And then we can factorize.
106
We factorize up dx
107
and what we've got in brackets is x1 squared plus x2 squared plus x3 squared
108
and so on and so Then what we can do is improve our estimate of the area even further.
109
What we can do is to divide up the area into much thinner trapezia.
110
We'll still say that each trapezium has a base of dx, but this time we've got a lot more of them.
111
Yes, there are still problems because we're still using straight lines to approximate curves, but these problems are much smaller than before.
112
So increasing the number of trapezia is reducing the error in our estimate.
113
Our estimate is getting better and better the more trapezia we have.
114
And we can keep doing this until we have large numbers of trapezia trapezia representing the area underneath the curve.
115
Then the total area under the curve becomes the sum
116
of the base dx multiplied by x1 squared plus x2 squared plus x3 squared plus however many midpoint x's
117
that we have squared.
118
And a short way to write this is as the sum of xn squared, where n takes the numbers 1, 2, 3, 4, 5, however many that we have,
119
and this weird e looking symbol which is actually the Greek letter sigma represents a sum over all of these terms.
120
Now don't worry too much about this bit, the next bit is what's important.
121
Basically what we can do is to then say
122
that our area is now divided up into infinitely many trapezia and each trapezium is infinitesimally thin.
123
In other words it's as thin as can be, we can make it as thin as we want it, and
124
if we were to zoom into the curve the base of the trapezium would still be thinner than we can ever imagine.
125
So to reiterate, we've divided the area of the curve into infinitely many trapezia.
126
And if we divide it up into infinitely many trapezia, then now what we have is no longer an estimate for the area of the curve, we have the exact area of the curve.
127
Because remember, as we increase the number of trapezia representing the area of the curve, our estimates got better and better and better.
128
And if we make dx so small that we have infinitely many trapezia, then we now have the exact area under the curve.
129
In this situation, the squiggly e-sign, the sigma, becomes an integral sign.
130
And that's where the integral sign comes from.
131
It represents an adding up of lots of little bits and pieces to give us the overall whole thing.
132
And the reason I said it so abstractly was because it doesn't necessarily have to represent the area underneath the curve.
133
The idea is that you add up lots of tiny elements to give us a whole thing.
134
Now of course when we're doing this properly and rigorously the symbols are slightly different.
135
We use delta x to represent the non-infinitesimally thick trapezia bases, but that's not really relevant to the video.
136
So let's move on.
137
Like I said, the integral sign is used to add up lots of little
138
tiny elements to give us the total whatever it is that we're trying to find.
139
And I described it very visually using the area underneath the curve, but this can be used for many different things, including the equation that we were looking at earlier.
140
And when we apply this train of thought to our equation, we see integral signs on both sides of the equation.
141
This means that on both sides, we're adding up lots of little things to find something bigger.
142
But what are these little things on each side?
143
Well, to understand what we've got inside these integral signs on each side of the equation, we need to remember the meanings of B and E.
144
If you've seen my previous video on Maxwell's equations, you'll recall that E represents the electric field that we're trying to study, and B represents the magnetic field that we're trying to study.
145
Both E and B, the electric field and magnetic field, are vector fields.
146
That's why they have arrows on the top of them to signify that they're vector fields.
147
Now, when we say vector fields, what we actually mean is
148
that at every point in the region of space being studied where the E field
149
and the B field Exist each of these fields has a vector value In other words, there's a vector or an arrow
150
that can be used to represent the value of this field E field
151
or B field at every point in space in the case
152
of the electric field the vector at each point Represents the force
153
that would be felt by a positive test charge placed at
154
that point In other words if we were to take a positive charge
155
and place it at
156
that particular point at the base of the arrow the force experienced by the charge would be towards the right
157
and it would be a fairly large force.
158
Whereas if we were to place it here instead, then it would experience a small force to the left.
159
The B field or the magnetic field is similar, but it represents the force experienced by a north pole of a magnet placed in the magnetic field.
160
If the explanation was a bit too complicated, then definitely check out the previous video.
161
I went into a lot more detail and did it a little bit more slowly as well.
162
However, let's carry on.
163
So now we can see that we're integrating something to do with the B field
164
and the E field on either side of the equation.
165
So let's clarify what we mean by dl and ds.
166
If we think back to our explanation about integral signs, we can see that they look a little bit like the dx's, which is what we use to label the bases of the trapezia.
167
In this case, we're not talking about using trapezia to work out the area of anything anymore, but we are using dl and ds, exactly like we use dx.
168
They are the little elements of something over which we'll be integrating.
169
Now that sounds a little bit vague, but before we look at dl and ds specifically, we need to realize that both dl and ds are also vectors.
170
They have arrows over the top of them.
171
And the dot that's been pointed out on either side of the equation doesn't just represent a normal multiplication.
172
It represents a sort of vector multiplication known as the scalar product or dot product.
173
And the reason it's known as a scalar product even though we're dealing with vectors is
174
because when you multiply these two vectors in a special way you get a scalar value.
175
And it preserves the relationship between the two vectors that we multiply together.
176
Let's not go into too much detail about that here.
177
But then on the left hand side we've got the electric field multiplied by this dl vector.
178
And then we integrate this whole expression.
179
So what do we mean by dl?
180
Well dl is a very small vector that lies on the perimeter of a surface that we shall call s.
181
Now the surface that we call s is going to become very important relatively soon so let's keep an eye on it.
182
But in the meantime let's say that this surface s is a circle
183
and on its perimeter we are talking about little elements dl that go all the way around the surface s.
184
In other words dl is representing a little length of the perimeter of the surface.
185
And so what we're doing here on the left hand side is to multiply the electric field by the dl vector,
186
which tells us how much the electric field is pointing in the direction of the dl vector at any particular point.
187
So let's say that at this point the electric field is pointing in the direction of the dl vector.
188
Well, in this case the electric field and the dl vector are going to multiply and because they're aligned, this means that the contribution of the electric field is going to be large at this point.
189
So we're looking at the contribution of the electric field at every single dl along the perimeter of our circular surface.
190
This means we're adding up the behavior of the electric field along the entire length of the circle.
191
And the reason that we're talking about this circle in the first place is
192
because that circle will become very important pretty soon.
193
Now let's quickly move on to ds.
194
Now ds is a similar kind of vector, but this ds represents an area.
195
Specifically, every single ds is a vector that is perpendicular to a little area element inside the circle that we're considering.
196
In other words, if we take a very tiny area, which we'll call dA for dArea, then ds is the vector that's perpendicular to that that represents this area.
197
And the reason that we use a vector to represent an area is
198
because that's one way of simplifying the description of an area.
199
Instead of thinking about an area as a two-dimensional surface, we can now just think of it as one vector.
200
So what we're doing here is to multiply this area vector by the magnetic field now.
201
In other words, what we're looking at is the contribution of the magnetic field within every single little area element.
202
And then once we add it all up, we add up all the contributions of the magnetic field to the little area elements within the circle that we're looking at.
203
And therefore, we're looking at the total contribution of the magnetic field within the circle.
204
Now, there's a complicated reason for why we're looking at the electric field along the perimeter of the circle, and why we're instead looking at the magnetic field going through the circle.
205
And hence why we're using DL when talking about the electric field and DS when talking about the magnetic field.
206
But the idea is, on the left hand side we've got the contribution of the electric field along the perimeter of the circle, and on the right we've got the contribution of the magnetic field through the circle.
207
And it's important, by the way, that all of the DLs that add up are around the perimeter of the surface
208
that we're considering on the right hand side.
209
In other words, when we add up all the little DAs or DSs, depending on how you want to think about it, the area that we find will have the perimeter that we get when we add up all of the DLs together.
210
Now, there's a little bit of an elephant in the room.
211
We haven't talked about the d divided by dt thing on the right hand side of the equation.
212
Well, all this means is that we're finding the rate of change of whatever is inside the integral.
213
Think about it this way.
214
You know when you find the velocity of an object, we're trying to find the distance it travels divided by the time taken for that object to travel that distance.
215
In other words, the velocity of an object is delta x, that's the change in distance, divided by delta t, that's the time interval over which that change in distance occurs.
216
In this case, we're doing exactly the same thing, but a little bit more rigorously and a little bit more calculus-ly.
217
If that's a word, which it's not.
218
Basically the d in the numerator is the same thing as the delta in the delta x part of the velocity equation, and the dt is the same thing as the delta t.
219
In other words, we're finding the rate of change of this whole integral, or how fast that integral changes over time.
220
And the negative sign basically just flips the sign, it's just the negative value of this rate of change.
221
And by the way, the phrase rate of change simply means how quickly or slowly something is changing.
222
So on the right hand side we're finding the negative of how quickly the integral is changing.
223
Where the integral is the contribution of the magnetic field within the area of the circle that we're thinking about.
224
Now that all sounds very complicated but this is where it gets simpler.
225
What if I was to tell you that the perimeter of the circle that we were considering is a loop of wire.
226
And that wire can carry a current.
227
What if I also tell you
228
that the left hand side of the equation gives us the EMF or voltage generated in that coil of wire.
229
This is because the voltage in a circuit is very closely related to the electric field in that circuit.
230
After all, electric fields are created by electric charges, and a voltage is just a measure of how electric charges want to move.
231
Kind of like how gravitational fields are a measure of how objects with mass want to move in that gravitational field, right?
232
So now we're thinking about a coil of wire, and on the left-hand side we have the EMF generated in that coil of wire.
233
And we're talking about magnetic fields going through that wire, and more specifically, the rate of change of the total contribution of the magnetic field within that wire.
234
This might be sounding a little bit familiar to some of you right now.
235
This equation is a very thorough and very glorified way of encoding the effects of electromagnetic induction.
236
That's the process where a changing magnetic field through a conducting coil causes an EMF to be generated within that coil.
237
Some of you might even have done an experiment where you take a bar magnet
238
and you move it in and out of a conducting piece of wire.
239
And if that wire forms a closed loop, then we can see that there's a current passing through the wire.
240
That current flows because we generate a voltage or EMF across the coils
241
when we move the bar magnet in or out of the coil.
242
In other words, a changing magnetic field through the area of the coil causes an EMF across the coil.
243
So this equation, once again, is essentially talking about electromagnetic induction, whilst also accounting for all of the effects that could possibly come about because of it.
244
And the way it does this is by being very mathematically rigorous.
245
We've used integrals and vectors and all this kind of neat but complicated stuff
246
to describe something which at high school we would have just learned as you move a magnet in
247
and out of a coil and we see an EMF generator.
248
And this stuff is actually quite tricky to understand, so if there's something that I haven't fully explained properly, then let me know in the comments down below as well and I'll try and clarify.
249
And as always, if I've got something wrong, let me know as well.
250
But yeah, so because this Maxwell equation is describing the effect of electromagnetic induction, this particular equation is known as the Maxwell-Faraday equation,
251
because Faraday's law of electromagnetic induction, if you don't know what that is, then definitely check out some other YouTube videos about it.
252
It's actually a really cool effect and if you don't know about it already then I'd highly recommend learning about it.
253
In high school we basically learned that the faster that the magnetic flux, that's the amount of magnetic field passing through a certain area, changes, the larger the EMF that's generated.
254
In other words, the quicker we move our bar magnet in and out of the coil, the larger the EMF that's generated.
255
And it's important to note that it's a change in magnetic flux through the area of the coil that makes the difference, not just putting a magnetic field through the coil.
256
That in itself is not enough.
257
That magnetic field must change and there are different ways to do this.
258
You could of course move the magnet in and out of the coil
259
but you could also change the area of the coil or rotate the coil.
260
And whatever we choose to do, the right hand side of the equation is accounting for the fact that the magnetic field through the coil is changing.
261
That's why we've got the d by dt term because it's calculating the rate of change of that magnetic field.
262
It's also accounting for the vector nature of the magnetic field
263
because the amount of magnetic field passing through an area that's perpendicular to it
264
is going to be different to the magnetic field passing through
265
that same area if the area is slightly rotated relative to the magnetic field.
266
And of course, there's a lot more intricate details that I haven't gone into, but we don't need to know about those.
267
The fact is that we now have a better understanding, hopefully, of this Maxwell equation, or rather, the Maxwell-Faraday equation.
268
And with all of that being said, guys, I hope you enjoyed this video.
269
Once again, if there's something you don't understand, let me know in the comments below.
270
If you've got any other misconceptions about physics, then let me know in the comments as well.
271
And if I can clarify anything or if I've got anything wrong, tell me down below also.
272
I know I've been away a little bit, I've only been uploading once every three weeks or so, but you know work life is busy
273
and I've been playing a lot of badminton
274
and doing a bit of music on the side as well and sort of enjoying life a little bit.
275
So I'm gonna try and come back to YouTube because I miss doing it, but I hope you guys are okay with having a video every two
276
or three weeks in the meantime and hopefully I'll be producing more videos
277
because like I said I genuinely really miss making videos, but again that depends on work commitments and anyway I'm I'm going to stop rambling.
278
Thank you so much for watching and I'll see you next time.
279
Bye.
ऐप डाउनलोड करें
धाराप्रवाह बोलने के लिए ज़रूरी सब कुछ
AI उच्चारण स्कोरहर वाक्य का स्कोर
IPA अभ्यासहर ध्वनि में महारत
शब्दावलीअपना शब्द भंडार बनाएँ
शब्द गेमखेलते हुए सीखें
उसी चैनल से
FOR YOU
अनुशंसित वीडियो
C22
216 वाक्य
Electromagnetism Derived From Geometry!
Daily ConversationUniversity Students
C11
7 वाक्य
Diodes Explained - The basics how diodes work working principle pn junction
Daily ConversationUniversity StudentsWorking Adults
C18
156 वाक्य
How Quantum Batteries Break Every Rule of Charging
Daily ConversationUniversity StudentsWorking Adults
C12
78 वाक्य
Vanishing & Exploding Gradient explained | A problem resulting from backpropagation
Daily ConversationUniversity Students
B21
29 वाक्य
OHM's Law in 3 minutes (Beginner friendly)
Daily ConversationUniversity Students
C12
138 वाक्य
Derivatives: Crash Course Physics #2
Daily ConversationUniversity Students
C11
150 वाक्य
Parallel Pump Operation
Daily ConversationUniversity StudentsWorking Adults
C181 वाक्य
Mathematician Collapses All Functions to One Weird Formula
Daily ConversationUniversity StudentsWorking Adults
C13
119 वाक्य
Mathematics and Physics | Lesson 2 | Understanding the Connection
Daily ConversationUniversity Students
B21
183 वाक्य
Concept of Electric Current with Train example | TheElectricalGuy
Daily ConversationUniversity Students
C16
51 वाक्य
1 6 What Illusions Teach Us
Daily ConversationUniversity Students
C11
166 वाक्य
Introduction to Optoelectronics and Photonics
Daily ConversationUniversity Students
इस पाठ की शब्दावली और बोलने के सुझाव
इस वीडियो में शैडोइंग के लिए 279 वाक्य और 4695 शब्द हैं। बोला गया हिस्सा 19:36 लंबा है। वक्ता तेज़ बोलता है, लगभग 239 शब्द प्रति मिनट, इसलिए जुड़ी हुई और कमज़ोर ध्वनियाँ ज़्यादा मिलेंगी। 82% शब्द अंग्रेज़ी के 3,000 सबसे आम शब्दों में से हैं; बाकी शब्द अभ्यास से पहले देख लेना अच्छा रहेगा।
इस वीडियो की मुख्य शब्दावली
वीडियो के 15 सीखने लायक शब्द, उच्चारण और अर्थ के साथ:
| शब्द | उच्चारण | अर्थ |
|---|---|---|
| equation संज्ञा | /ɪˈkweɪ.ʒən/ | समीकरण |
| vector संज्ञा | /ˈvɛktɚ/ | सदिश |
| curve संज्ञा | /kɚv/ | चक्कर, घुमाव |
| coil संज्ञा | /kɔɪl/ | कुंडली |
| integral विशेषण | /ˈɪntəɡɹəl/ | समाकलन |
| triangle संज्ञा | /ˈtɹaɪˌæŋɡəl/ | त्रिकोण, त्रिभुज |
| estimate संज्ञा | /ˈɛs.tɪ.mət/ | आकलन, अनुमान |
| wire संज्ञा | /ˈwaɪɚ/ | तार |
| contribution संज्ञा | /ˌkɑntɹɪˈbjuʃən/ | योगदान |
| divide क्रिया | /dɪˈvaɪd/ | बांटना |
| perimeter संज्ञा | /pɪˈɹɪm.ɪ.tə/ | परिमाप |
| symbol संज्ञा | /ˈsɪmbəl/ | प्रतीक, चिह्न |
| complicated विशेषण | /ˈkɑm.plɪˌkeɪ.tɪd/ | जटिल, पेचीदा |
| generate क्रिया | /ˈd͡ʒɛn.ə.ɹeɪt/ | उपजाना |
| delta संज्ञा | /ˈdɛltə/ | डेल्टा |
ध्यान देने योग्य उच्चारण
वक्ता 109 बार संक्षिप्त रूपों का प्रयोग करता है, जैसे we're, we've, don't। इन्हें वैसे ही छोटा बोलें जैसा आप सुनते हैं।
- “th” की ध्वनियाँ: underneath /ˌʌndɚˈniθ/, thin /ˈθɪn/, thick /θɪk/, mathematical /ˌmæθ(.ə)ˈmæt.ɪ.kəl/, thorough /ˈθʌɹoʊ/
- “sh” और “zh” की ध्वनियाँ: equation /ɪˈkweɪ.ʒən/, contribution /ˌkɑntɹɪˈbjuʃən/, induction /ɪnˈdʌkʃən/, shade /ʃeɪd/, explanation /ˌɛkspləˈneɪʃən/
- लंबे शब्द — बलाघात सही रखें: contribution /ˌkɑntɹɪˈbjuʃən/, perimeter /pɪˈɹɪm.ɪ.tə/, complicated /ˈkɑm.plɪˌkeɪ.tɪd/, electromagnetic /ɪˌlɛk.tɹoʊ.mæɡˈnɛ.tɪk/, infinitely /ˈɪnfɪnɪtli/
इस वीडियो से अभ्यास कैसे करें
- पहले बिना बोले पूरा वीडियो एक बार सुनें और जो शब्द नहीं आते उन्हें लिख लें।
- 0.75× गति से शुरू करें, एक-एक वाक्य की शैडोइंग करें, और सहज लगने पर सामान्य गति पर लौटें।
- अपनी आवाज़ रिकॉर्ड करें और मूल से तुलना करें, ख़ासकर equation, vector, curve जैसे शब्दों पर ध्यान दें।
इस वीडियो का व्याकरण
वक्ता जिन संरचनाओं का सबसे अधिक प्रयोग करता है, वीडियो के असली शब्दों के साथ:
| संरचना | वीडियो में |
|---|---|
| Present perfect continuous have/has been + -ing — पहले शुरू हुआ काम जो अब भी जारी है | I've only been uploading · I've been playing |
| Present perfect have/has + past participle — बीता हुआ काम जिसका असर अभी भी है | I've already made · you've subscribed · haven't already seen |
| Passive voice be + past participle — ज़ोर इस पर कि क्या होता है, न कि कौन करता है | must be closed · is known · is found |
| Relative clauses who / which + उपवाक्य — व्यक्ति या वस्तु के बारे में अतिरिक्त जानकारी | base, which is · height which is · symbol which is |
शैडोइंग तकनीक क्या है?
शैडोइंग (Shadowing) एक विज्ञान-समर्थित भाषा सीखने की तकनीक है जो मूल रूप से पेशेवर दुभाषिया प्रशिक्षण के लिए विकसित की गई थी। विधि सरल लेकिन शक्तिशाली है: आप मूल अंग्रेज़ी ऑडियो सुनते हैं और तुरंत इसे ज़ोर से दोहराते हैं — जैसे वक्ता की छाया 1-2 सेकंड की देरी से। शोध से पता चलता है कि यह उच्चारण सटीकता, स्वर, लय, जुड़ी हुई ध्वनियाँ, सुनने की समझ और बोलने की प्रवाहशीलता में काफ़ी सुधार करता है।