Shadowing Practice: LET THERE BE... Voltage? | Maxwell's Equation #2 Explained for Beginners - Learn English Speaking with Video

בחר מצב תרגול

כל מצב פותח חדר תרגול במסך מלא.

279 משפטים

אם המשפטים קצרים או ארוכים מדי, לחץ על ערוך כדי להתאים אותם.

What's up you lot, Parth here and today I'm going to be talking about one of Maxwell's four equations of electromagnetism.

Now, I've already made a video about one of them in the past and you guys seem to enjoy it, so check it out up here if you haven't seen it already.

Although don't worry, you don't need to have seen it to understand what I'm going to be talking about in this one.

But still go and check it out if you haven't already, it's actually quite a good video if I do say so myself.

Anyway, let's get into it.

Well, no, hang on, I can't do that yet.

I have to say first of all, Thank you so much for 7,000 subscribers.

That is ridiculous.

We are well on our way to 10k, which is, you know, pretty cool.

So thank you so much if you've subscribed already.

And if you haven't, then please do consider it, depending on whether or not you like this video.

So without further ado, let's get into the video so you can figure out whether or not you like it.

So if you don't know, Maxwell's equations are a series of four equations compiled by James Clerk Maxwell that describe everything to do with electricity and magnetism,

collectively known as electromagnetism.

Now, in the previous video I made about Maxwell's equations, which I linked up there earlier, I discussed one of the four Maxwell equations, and that one dealt with the fact that there is no such thing as a magnetic monopole.

And as a consequence of this, we discussed the idea that magnetic field lines must not have a start or an end point.

They must be closed loops.

Now that sounds relatively complicated, especially if you don't know what any of that means, but I tried to make it as easy to understand for somebody who's never seen this kind of stuff before.

So that's what I'm going to be trying to do in this video as well.

Now, the reason that I brought up the previous video is because in that one I used differential notation.

I discussed what these little upside down triangles mean.

However, some of you in the comments said

that you would like to see the next Maxwell equation discussed in the integral form, which looks a little bit something like this for the previous one that I discussed.

And that actually really helps me out because the differential notation

and the integral notation are just two different ways of writing exactly the same thing.

They're just two ways of looking at the same thing from different angles.

And the reason that your request helps me out is because, well, the equation that we're going to be looking at today is actually much easier to discuss in integral notation.

So thank you for that.

Okay, so the equation that we're looking at today is this one.

This is what it looks like, and hopefully by the end of the video, we'll be able to understand exactly what all of the symbols in this equation mean.

So let's start with this S-shaped symbol, which we can see on both sides of the equation.

It's known as the integral symbol.

Some of you will have seen this symbol already from your studies of calculus, but if you haven't already seen the symbol, then let's quickly go over what it means.

To do this, let's first imagine that we're dealing with a mathematical function.

Let's say we're dealing with y is equal to x, one of the simplest functions that we can think of.

This function is such that whatever the x value at a particular point along that line, the y value is exactly the same as the x value.

And this is true along the entire length of the line.

So that's why the function is known as y is equal to x, because on that line, at every point, the y value is exactly the same as the x value.

Now let's imagine that for some reason we want to try

and find the area underneath this line and above the horizontal or x axis.

And we want to do this between x is equal to 0 and a specific value of x.

Let's say x is equal to 10.

So now what we've drawn is a shaded triangle.

So we can work out this shaded triangle's area by recalling how to calculate the area of a triangle.

We can remember that the area of a triangle is found by multiplying half by the base by the height.

Now we know that the base of the triangle is 10 units long

because we're calculating the area of the triangle from x is

equal to 0 all the way to x is equal to 10.

However, we don't immediately know the height of the triangle, but we kind of do.

Because we know that the function we were dealing with is y is equal to x.

Therefore if we pick any point on the line, and in this case we'll pick the most convenient one, then we know that the x value is equal to the y value.

This means that if we pick the point where x is equal to 10, then y must also be equal to 10.

Therefore we can see that the height of the triangle is 10 units.

And in doing so we can calculate the area of the triangle as half multiplied by the base, which is 10, multiplied by the height, which is also 10.

And that ends up being 50 units squared.

Now this is easy enough, right?

But this kind of stuff only works with relatively simple functions, such as y is equal to x.

What do we do in a situation where we've got a more complicated function?

Let's say y is equal to x squared.

Now this curve, y is equal to x squared, is defined in such a way that whatever the x value is at a certain point on the curve, the y value is that x value squared.

That's why it's known as y is equal to x squared.

For example, if we take the point x is equal to 2, then on the curve, y is equal to 4.

And if we take the value x is equal to 5, then on the curve y is equal to 25.

So coming back to what we were trying to do earlier, let's now try and find the area underneath the curve above the horizontal axis

and between x is equal to 0 and x is equal to 10.

Now we don't have a triangle anymore, so it's not quite as simple as it was before.

In fact, we've got this whole curvy bit, right?

That's what's preventing us from calculating just the area of a triangle.

However, we could calculate the area of this triangle

that I've drawn in right now and just say that this is an estimate of the actual area.

Admittedly, it's a pretty poor estimate and it's an overestimate of the actual area

because we're also saying that the area under the function includes this shaded bit here, when in reality it doesn't.

So we've overestimated the area.

Now, a way to improve our estimate is to not say

that the area is a triangle but rather divide up the area under the curve into trapezia.

Then what we can do is to find out the area of each trapezium

and add it up all together to find the area underneath the curve

or at least an estimate of the area underneath the curve.

Now the reason

that this is still an estimate of the area albeit a better one than before is

because we have straight lines at the top of each trapezium rather than the curve

which is what we'd have if we had exactly the area that we're trying to find. But anyway, so the way to find the area of each trapezium is

to multiply the base length of the trapezium by the height exactly down the middle of the trapezium.

And we can do this for each different trapezium

and then add up all the areas to find a better estimate of the area underneath the curve.

Now, another thing that we're going to do is to call the base of each trapezium dx.

This is just a notation thing, but it'll become clear why we do this in a minute.

So don't worry about why it's called dx.

It's just that's what we're going to call that length.

And so essentially what we're doing is dividing the area

that we're trying to find into trapezia such

that the base length of each trapezium is the same as the base length of every other trapezium.

Each trapezium has a base length of dx.

Then we can work out the middle height of let's say the first trapezium.

So we can say

that the center of the base of the trapezium has a x coordinate x1

and then we can follow it up to the curve

and we can work out what the y value is

because we know that y on the curve is equal to x squared.

100

So the area of the first trapezium is the base dx multiplied by the middle height which is x1 squared.

101

The area of the second trapezium is dx multiplied by x2 squared.

102

The area of the third trapezium is dx multiplied by x3 squared and so on and so forth.

103

And to find an estimate for the total area underneath the curve we add up all of these areas.

104

So we get dx multiplied by x1 squared plus dx multiplied by x2 squared plus so on and so forth.

105

And then we can factorize.

106

We factorize up dx

107

and what we've got in brackets is x1 squared plus x2 squared plus x3 squared

108

and so on and so Then what we can do is improve our estimate of the area even further.

109

What we can do is to divide up the area into much thinner trapezia.

110

We'll still say that each trapezium has a base of dx, but this time we've got a lot more of them.

111

Yes, there are still problems because we're still using straight lines to approximate curves, but these problems are much smaller than before.

112

So increasing the number of trapezia is reducing the error in our estimate.

113

Our estimate is getting better and better the more trapezia we have.

114

And we can keep doing this until we have large numbers of trapezia trapezia representing the area underneath the curve.

115

Then the total area under the curve becomes the sum

116

of the base dx multiplied by x1 squared plus x2 squared plus x3 squared plus however many midpoint x's

117

that we have squared.

118

And a short way to write this is as the sum of xn squared, where n takes the numbers 1, 2, 3, 4, 5, however many that we have,

119

and this weird e looking symbol which is actually the Greek letter sigma represents a sum over all of these terms.

120

Now don't worry too much about this bit, the next bit is what's important.

121

Basically what we can do is to then say

122

that our area is now divided up into infinitely many trapezia and each trapezium is infinitesimally thin.

123

In other words it's as thin as can be, we can make it as thin as we want it, and

124

if we were to zoom into the curve the base of the trapezium would still be thinner than we can ever imagine.

125

So to reiterate, we've divided the area of the curve into infinitely many trapezia.

126

And if we divide it up into infinitely many trapezia, then now what we have is no longer an estimate for the area of the curve, we have the exact area of the curve.

127

Because remember, as we increase the number of trapezia representing the area of the curve, our estimates got better and better and better.

128

And if we make dx so small that we have infinitely many trapezia, then we now have the exact area under the curve.

129

In this situation, the squiggly e-sign, the sigma, becomes an integral sign.

130

And that's where the integral sign comes from.

131

It represents an adding up of lots of little bits and pieces to give us the overall whole thing.

132

And the reason I said it so abstractly was because it doesn't necessarily have to represent the area underneath the curve.

133

The idea is that you add up lots of tiny elements to give us a whole thing.

134

Now of course when we're doing this properly and rigorously the symbols are slightly different.

135

We use delta x to represent the non-infinitesimally thick trapezia bases, but that's not really relevant to the video.

136

So let's move on.

137

Like I said, the integral sign is used to add up lots of little

138

tiny elements to give us the total whatever it is that we're trying to find.

139

And I described it very visually using the area underneath the curve, but this can be used for many different things, including the equation that we were looking at earlier.

140

And when we apply this train of thought to our equation, we see integral signs on both sides of the equation.

141

This means that on both sides, we're adding up lots of little things to find something bigger.

142

But what are these little things on each side?

143

Well, to understand what we've got inside these integral signs on each side of the equation, we need to remember the meanings of B and E.

144

If you've seen my previous video on Maxwell's equations, you'll recall that E represents the electric field that we're trying to study, and B represents the magnetic field that we're trying to study.

145

Both E and B, the electric field and magnetic field, are vector fields.

146

That's why they have arrows on the top of them to signify that they're vector fields.

147

Now, when we say vector fields, what we actually mean is

148

that at every point in the region of space being studied where the E field

149

and the B field Exist each of these fields has a vector value In other words, there's a vector or an arrow

150

that can be used to represent the value of this field E field

151

or B field at every point in space in the case

152

of the electric field the vector at each point Represents the force

153

that would be felt by a positive test charge placed at

154

that point In other words if we were to take a positive charge

155

and place it at

156

that particular point at the base of the arrow the force experienced by the charge would be towards the right

157

and it would be a fairly large force.

158

Whereas if we were to place it here instead, then it would experience a small force to the left.

159

The B field or the magnetic field is similar, but it represents the force experienced by a north pole of a magnet placed in the magnetic field.

160

If the explanation was a bit too complicated, then definitely check out the previous video.

161

I went into a lot more detail and did it a little bit more slowly as well.

162

However, let's carry on.

163

So now we can see that we're integrating something to do with the B field

164

and the E field on either side of the equation.

165

So let's clarify what we mean by dl and ds.

166

If we think back to our explanation about integral signs, we can see that they look a little bit like the dx's, which is what we use to label the bases of the trapezia.

167

In this case, we're not talking about using trapezia to work out the area of anything anymore, but we are using dl and ds, exactly like we use dx.

168

They are the little elements of something over which we'll be integrating.

169

Now that sounds a little bit vague, but before we look at dl and ds specifically, we need to realize that both dl and ds are also vectors.

170

They have arrows over the top of them.

171

And the dot that's been pointed out on either side of the equation doesn't just represent a normal multiplication.

172

It represents a sort of vector multiplication known as the scalar product or dot product.

173

And the reason it's known as a scalar product even though we're dealing with vectors is

174

because when you multiply these two vectors in a special way you get a scalar value.

175

And it preserves the relationship between the two vectors that we multiply together.

176

Let's not go into too much detail about that here.

177

But then on the left hand side we've got the electric field multiplied by this dl vector.

178

And then we integrate this whole expression.

179

So what do we mean by dl?

180

Well dl is a very small vector that lies on the perimeter of a surface that we shall call s.

181

Now the surface that we call s is going to become very important relatively soon so let's keep an eye on it.

182

But in the meantime let's say that this surface s is a circle

183

and on its perimeter we are talking about little elements dl that go all the way around the surface s.

184

In other words dl is representing a little length of the perimeter of the surface.

185

And so what we're doing here on the left hand side is to multiply the electric field by the dl vector,

186

which tells us how much the electric field is pointing in the direction of the dl vector at any particular point.

187

So let's say that at this point the electric field is pointing in the direction of the dl vector.

188

Well, in this case the electric field and the dl vector are going to multiply and because they're aligned, this means that the contribution of the electric field is going to be large at this point.

189

So we're looking at the contribution of the electric field at every single dl along the perimeter of our circular surface.

190

This means we're adding up the behavior of the electric field along the entire length of the circle.

191

And the reason that we're talking about this circle in the first place is

192

because that circle will become very important pretty soon.

193

Now let's quickly move on to ds.

194

Now ds is a similar kind of vector, but this ds represents an area.

195

Specifically, every single ds is a vector that is perpendicular to a little area element inside the circle that we're considering.

196

In other words, if we take a very tiny area, which we'll call dA for dArea, then ds is the vector that's perpendicular to that that represents this area.

197

And the reason that we use a vector to represent an area is

198

because that's one way of simplifying the description of an area.

199

Instead of thinking about an area as a two-dimensional surface, we can now just think of it as one vector.

200

So what we're doing here is to multiply this area vector by the magnetic field now.

201

In other words, what we're looking at is the contribution of the magnetic field within every single little area element.

202

And then once we add it all up, we add up all the contributions of the magnetic field to the little area elements within the circle that we're looking at.

203

And therefore, we're looking at the total contribution of the magnetic field within the circle.

204

Now, there's a complicated reason for why we're looking at the electric field along the perimeter of the circle, and why we're instead looking at the magnetic field going through the circle.

205

And hence why we're using DL when talking about the electric field and DS when talking about the magnetic field.

206

But the idea is, on the left hand side we've got the contribution of the electric field along the perimeter of the circle, and on the right we've got the contribution of the magnetic field through the circle.

207

And it's important, by the way, that all of the DLs that add up are around the perimeter of the surface

208

that we're considering on the right hand side.

209

In other words, when we add up all the little DAs or DSs, depending on how you want to think about it, the area that we find will have the perimeter that we get when we add up all of the DLs together.

210

Now, there's a little bit of an elephant in the room.

211

We haven't talked about the d divided by dt thing on the right hand side of the equation.

212

Well, all this means is that we're finding the rate of change of whatever is inside the integral.

213

Think about it this way.

214

You know when you find the velocity of an object, we're trying to find the distance it travels divided by the time taken for that object to travel that distance.

215

In other words, the velocity of an object is delta x, that's the change in distance, divided by delta t, that's the time interval over which that change in distance occurs.

216

In this case, we're doing exactly the same thing, but a little bit more rigorously and a little bit more calculus-ly.

217

If that's a word, which it's not.

218

Basically the d in the numerator is the same thing as the delta in the delta x part of the velocity equation, and the dt is the same thing as the delta t.

219

In other words, we're finding the rate of change of this whole integral, or how fast that integral changes over time.

220

And the negative sign basically just flips the sign, it's just the negative value of this rate of change.

221

And by the way, the phrase rate of change simply means how quickly or slowly something is changing.

222

So on the right hand side we're finding the negative of how quickly the integral is changing.

223

Where the integral is the contribution of the magnetic field within the area of the circle that we're thinking about.

224

Now that all sounds very complicated but this is where it gets simpler.

225

What if I was to tell you that the perimeter of the circle that we were considering is a loop of wire.

226

And that wire can carry a current.

227

What if I also tell you

228

that the left hand side of the equation gives us the EMF or voltage generated in that coil of wire.

229

This is because the voltage in a circuit is very closely related to the electric field in that circuit.

230

After all, electric fields are created by electric charges, and a voltage is just a measure of how electric charges want to move.

231

Kind of like how gravitational fields are a measure of how objects with mass want to move in that gravitational field, right?

232

So now we're thinking about a coil of wire, and on the left-hand side we have the EMF generated in that coil of wire.

233

And we're talking about magnetic fields going through that wire, and more specifically, the rate of change of the total contribution of the magnetic field within that wire.

234

This might be sounding a little bit familiar to some of you right now.

235

This equation is a very thorough and very glorified way of encoding the effects of electromagnetic induction.

236

That's the process where a changing magnetic field through a conducting coil causes an EMF to be generated within that coil.

237

Some of you might even have done an experiment where you take a bar magnet

238

and you move it in and out of a conducting piece of wire.

239

And if that wire forms a closed loop, then we can see that there's a current passing through the wire.

240

That current flows because we generate a voltage or EMF across the coils

241

when we move the bar magnet in or out of the coil.

242

In other words, a changing magnetic field through the area of the coil causes an EMF across the coil.

243

So this equation, once again, is essentially talking about electromagnetic induction, whilst also accounting for all of the effects that could possibly come about because of it.

244

And the way it does this is by being very mathematically rigorous.

245

We've used integrals and vectors and all this kind of neat but complicated stuff

246

to describe something which at high school we would have just learned as you move a magnet in

247

and out of a coil and we see an EMF generator.

248

And this stuff is actually quite tricky to understand, so if there's something that I haven't fully explained properly, then let me know in the comments down below as well and I'll try and clarify.

249

And as always, if I've got something wrong, let me know as well.

250

But yeah, so because this Maxwell equation is describing the effect of electromagnetic induction, this particular equation is known as the Maxwell-Faraday equation,

251

because Faraday's law of electromagnetic induction, if you don't know what that is, then definitely check out some other YouTube videos about it.

252

It's actually a really cool effect and if you don't know about it already then I'd highly recommend learning about it.

253

In high school we basically learned that the faster that the magnetic flux, that's the amount of magnetic field passing through a certain area, changes, the larger the EMF that's generated.

254

In other words, the quicker we move our bar magnet in and out of the coil, the larger the EMF that's generated.

255

And it's important to note that it's a change in magnetic flux through the area of the coil that makes the difference, not just putting a magnetic field through the coil.

256

That in itself is not enough.

257

That magnetic field must change and there are different ways to do this.

258

You could of course move the magnet in and out of the coil

259

but you could also change the area of the coil or rotate the coil.

260

And whatever we choose to do, the right hand side of the equation is accounting for the fact that the magnetic field through the coil is changing.

261

That's why we've got the d by dt term because it's calculating the rate of change of that magnetic field.

262

It's also accounting for the vector nature of the magnetic field

263

because the amount of magnetic field passing through an area that's perpendicular to it

264

is going to be different to the magnetic field passing through

265

that same area if the area is slightly rotated relative to the magnetic field.

266

And of course, there's a lot more intricate details that I haven't gone into, but we don't need to know about those.

267

The fact is that we now have a better understanding, hopefully, of this Maxwell equation, or rather, the Maxwell-Faraday equation.

268

And with all of that being said, guys, I hope you enjoyed this video.

269

Once again, if there's something you don't understand, let me know in the comments below.

270

If you've got any other misconceptions about physics, then let me know in the comments as well.

271

And if I can clarify anything or if I've got anything wrong, tell me down below also.

272

I know I've been away a little bit, I've only been uploading once every three weeks or so, but you know work life is busy

273

and I've been playing a lot of badminton

274

and doing a bit of music on the side as well and sort of enjoying life a little bit.

275

So I'm gonna try and come back to YouTube because I miss doing it, but I hope you guys are okay with having a video every two

276

or three weeks in the meantime and hopefully I'll be producing more videos

277

because like I said I genuinely really miss making videos, but again that depends on work commitments and anyway I'm I'm going to stop rambling.

278

Thank you so much for watching and I'll see you next time.

279

Bye.

הורד אפליקציה

כל מה שאתה צריך כדי לדבר בשטף

הגיית AIציון לכל משפט

תרגול IPAשלוט בכל צליל

אוצר מיליםבנה את מאגר המילים שלך

משחק אוצר מיליםלמד תוך כדי משחק

סרוק QR

Download on theApp Store Get it onGoogle Play

אותו ערוץ

Let There Be Light: Maxwell's Equation EXPLAINED for BEGINNERS

IELTS PrepTOEFL PrepUniversity Students

Einstein Didn't Invent Relativity! - Physics Explained for Beginners

Daily ConversationUniversity Students

FOR YOU

המלץ על סרטון

119 משפטים

Mathematics and Physics | Lesson 2 | Understanding the Connection

Daily ConversationUniversity Students

169 משפטים

120V 240V Electricity explained - Split phase 3 wire electrician

Daily ConversationUniversity Students

78 משפטים

Vanishing & Exploding Gradient explained | A problem resulting from backpropagation

Daily ConversationUniversity Students

118 משפטים

Current | Introduction to electrical engineering | Electrical engineering | Khan Academy

Daily ConversationUniversity Students

440 משפטים

אוצר מילים והערות הגייה לשיעור הזה

שיעור הדיבור הזה ברמה C1 מבוסס על הסרטון “LET THERE BE... Voltage?”. המילים שחוזרות הכי הרבה: field, magnetic, equation, vector, curve. בסרטון הזה יש 279 משפטים ו-4695 מילים לתרגול Shadowing. הדיבור נמשך 19:36. הדובר מדבר מהר, כ-239 מילים בדקה, אז צפו לצלילים מחוברים ומקוצרים. 82% מהמילים נמצאות בין 3,000 המילים הנפוצות ביותר באנגלית; כדאי ללמוד את השאר לפני שמתחילים.

אוצר מילים מרכזי בסרטון הזה

15 המילים המתקדמות ביותר בסרטון, עם ההגייה והמשמעות שלהן:

מילה	הגייה	משמעות
trapezium שם עצם	/tɹæˈpi.zi.əm/	טְרָפֶּז
equation שם עצם	/ɪˈkweɪ.ʒən/	משוואה \ מִשְׁוָאָה
vector שם עצם	/ˈvɛktɚ/	וקטור
integral שם תואר	/ˈɪntəɡɹəl/	אִינְטֶגְרָלִי
triangle שם עצם	/ˈtɹaɪˌæŋɡəl/	משולש \ מְשֻׁלָּשׁ
perimeter שם עצם	/pɪˈɹɪm.ɪ.tə/	היקף, הֶקֵּף
magnet שם עצם	/ˈmæɡ.nɪt/	מַגְנֵט
calculate פועל	/ˈkælkjʊleɪt/	חישב \ חִשֵּׁב
notation שם עצם	/noʊˈteɪʃən/	רישום
voltage שם עצם	/ˈvəʊltɪd͡ʒ/	מֶתַח, ווֹלטָג׳
perpendicular שם תואר	/ˌpɜː.pənˈdɪk.jə.lə(ɹ)/	מאונך \ מְאֻנָךְ, ניצב \ נִצָּב
clarify פועל	/ˈklæɹ.ɪ.faɪ/	הבהיר
velocity שם עצם	/vəˈlɑsəti/	מהירות
electromagnetism שם עצם	/ɪˌlɛk.tɹəʊˈmæɡ.nəˌtɪzm̩/	אלקטרומגנטיות
sigma שם עצם	/ˈsɪɡmə/	סִיגְמָא

Phrasal verbs שתשמעו

מילה	משמעות
check out פועל	בדק
figure out פועל	הֵבִין, מצא תשובה

משפטים שכדאי לחזור עליהם

משפטים קצרים ושלמים מהסרטון שאפשר להשתמש בהם בשיחה יומיומית:

Anyway, let's get into it.
Let's say y is equal to x squared.
In fact, we've got this whole curvy bit, right?

דקדוק בסרטון הזה

המבנים שהדובר משתמש בהם הכי הרבה, עם המילים המדויקות מהסרטון:

מבנה	בסרטון
הווה מושלם ממושך (Present perfect continuous) have/has been + -ing — פעולה שהתחילה בעבר ועדיין נמשכת עכשיו	I've only been uploading · I've been playing
הווה מושלם (Present perfect) have/has + past participle — פעולה שקרתה בעבר ועדיין יש לה חשיבות או השפעה עכשיו	I've already made · you've subscribed · haven't already seen
סביל (Passive voice) be + past participle — הדגש הוא על מה שקורה, לא על מי שעושה את הפעולה	must be closed · is known · is found
משפטי זיקה (Relative clauses) who / which + clause — מידע נוסף על אדם או דבר	base, which is · height which is · symbol which is

הגייה ששווה לשים לב אליה

הדובר משתמש ב-109 קיצורים וצורות מקוצרות, כמו we're, we've, don't. אמרו אותם בצורה הקצרה, כפי שאתם שומעים אותם.

הצלילים של “th”: underneath /ˌʌndɚˈniθ/, thorough /ˈθʌɹoʊ/, mathematical /ˌmæθ(.ə)ˈmæt.ɪ.kəl/
הצלילים של “sh” ו-“zh”: equation /ɪˈkweɪ.ʒən/, notation /noʊˈteɪʃən/, induction /ɪnˈdʌkʃən/, gravitational /ˌɡɹævɪˈteɪʃənəl/, multiplication /ˌmʌltɪplɪˈkeɪʃən/
מילים ארוכות — שימו לב להטעמה: trapezium /tɹæˈpi.zi.əm/, perimeter /pɪˈɹɪm.ɪ.tə/, infinitely /ˈɪnfɪnɪtli/, electromagnetic /ɪˌlɛk.tɹoʊ.mæɡˈnɛ.tɪk/, perpendicular /ˌpɜː.pənˈdɪk.jə.lə(ɹ)/

צלילים שדוברי עברית מתקשים בהם:

/w/ — שפתיים מעוגלות, לא /v/: equation /ɪˈkweɪ.ʒən/, squiggly /ˈskwɪɡli/, consequence /ˈkɑn.sɪ.kwəns/
/æ/ — פתוח יותר מה-“אֶ” העברית, לא כמו “a” ב-“cup”: trapezium /tɹæˈpi.zi.əm/, triangle /ˈtɹaɪˌæŋɡəl/, magnet /ˈmæɡ.nɪt/, calculate /ˈkælkjʊleɪt/, electromagnetic /ɪˌlɛk.tɹoʊ.mæɡˈnɛ.tɪk/
/r/ — הלשון לא נוגעת בשום מקום, לא ה-“ר” הגרונית: trapezium /tɹæˈpi.zi.əm/, integral /ˈɪntəɡɹəl/, triangle /ˈtɹaɪˌæŋɡəl/, perimeter /pɪˈɹɪm.ɪ.tə/, electromagnetic /ɪˌlɛk.tɹoʊ.mæɡˈnɛ.tɪk/

איך לתרגל עם הסרטון הזה

הקשיבו לכל הסרטון פעם אחת בלי לדבר, ורשמו את המילים שאתם לא מכירים.
התחילו במהירות 0.75×, תרגלו Shadowing משפט אחר משפט, וחזרו למהירות רגילה כשזה מרגיש קל.
הקליטו את עצמכם והשוו למקור, תוך תשומת לב למילים כמו trapezium, equation, vector.

מהי טכניקת השאדואינג?

שאדואינג היא טכניקת למידת שפה מבוססת מדע שפותחה במקור להכשרת מתורגמנים מקצועיים ופופולרית על ידי הפוליגלוט ד"ר אלכסנדר ארגואלס. השיטה פשוטה אך עוצמתית: אתה מקשיב לאודיו באנגלית ילידית וחוזר עליו בקול רם מיד — כמו צל העוקב אחרי הדובר עם עיכוב של 1–2 שניות בלבד. בניגוד להאזנה פסיבית או תרגילי דקדוק, שאדואינג מכריח את המוח והשרירים בפה לעבד ולשחזר דפוסי דיבור אמיתיים בו זמנית. מחקרים מראים שזה משפר משמעותית את דיוק ההגייה, האינטונציה, הקצב, הדיבור המחובר, הבנת השמיעה ושטף הדיבור — מה שהופך אותו לאחת השיטות היעילות ביותר להכנה לIELTS Speaking ולתקשורת באנגלית בעולם האמיתי.

טכניקת Shadowing: קרא את המדריך המלא שלב אחר שלב →

Shadowing Practice: LET THERE BE... Voltage? | Maxwell's Equation #2 Explained for Beginners - Learn English Speaking with Video

בחר מצב תרגול

הורד אפליקציה

Let There Be Light: Maxwell's Equation EXPLAINED for BEGINNERS

Einstein Didn't Invent Relativity! - Physics Explained for Beginners

Mathematics and Physics | Lesson 2 | Understanding the Connection

120V 240V Electricity explained - Split phase 3 wire electrician

Vanishing & Exploding Gradient explained | A problem resulting from backpropagation

Current | Introduction to electrical engineering | Electrical engineering | Khan Academy

White holes and wormholes are probably real. Here's why.

OHM's Law in 3 minutes (Beginner friendly)

I Made an EMP Device... It Actually Works

Differential equations, a tourist's guide | DE1

Introduction to Optoelectronics and Photonics

Parallel Pump Operation

Every Networking Concept Explained | Networking 101 (2026)

Diodes Explained - The basics how diodes work working principle pn junction

אוצר מילים והערות הגייה לשיעור הזה

אוצר מילים מרכזי בסרטון הזה

Phrasal verbs שתשמעו

משפטים שכדאי לחזור עליהם

דקדוק בסרטון הזה

הגייה ששווה לשים לב אליה

איך לתרגל עם הסרטון הזה

מהי טכניקת השאדואינג?