शैडोइंग अभ्यास: True 4k Gaming PC (2026) - Classic LTT Build Guide - वीडियो के साथ अंग्रेजी बोलना सीखें

अभ्यास मोड चुनें

हर मोड पूरी स्क्रीन का अभ्यास कक्ष खोलता है।

260 वाक्य

यदि वाक्य बहुत छोटे या लंबे हों, तो समायोजित करने के लिए Edit पर क्लिक करें।

This is a 4K gaming PC.

At least according to Valve, but by that logic, anything with a 4K HDMI port is a 4K gaming machine, depending on the games you run.

But that's not what you and I mean when we say 4K gaming PC.

And today's build, powered by Seasonic, is for real 4K gaming, but without spending any more money than we absolutely have to.

So, with that in mind, let's dive right in with a choice

that is going to Blow the mind of anyone who didn't notice that Intel quietly snuck into the lead for bang-for-the-butt gaming.

I mean, I wouldn't blame you for missing it.

Their Core Ultra 200 series first landed on the market like a wet dog fart,

somehow offering worse performance in gaming than their predecessors.

But the similarly named Core Ultra 200 Plus series...

Devils in the details.

It's a lot more than a mid-cycle refresh, and the 250KF Plus makes a strong argument for itself with

six powerful P cores that'll boost up to 5.3 GHz for our games, and then another 12 E cores to handle everything else.

Intel did recently increase pricing on the Plus series, allegedly due to strong demand, but we can counter some of that by choosing the F variant,

which doesn't have integrated graphics.

Now it's worth noting that if you wanna squeeze the most performance out of every penny, you can drop your CPU selection down to AMD's Ryzen 5 5600X.

The chip itself is not a bargain, but AM4 motherboards and DDR4 are.

And once you ramp up the resolution, CPU bottlenecks are less of a concern.

But still guys, we'd be talking about a nearly six year old chip in a 10 year old socket.

And I personally feel that the 250KF Plus is worth the extra scratch, especially because it's not that much extra for the platform overall.

At $110, ASRock's B860M Pro A feels like kind of a return to sanity in motherboard pricing.

You won't get much in the way of extras or frills, but it features solid power delivery, high-speed USB and 2.5 gig networking, and ample M.2 storage expansion slots,

though at current pricing, I think we'll probably just populate one of them.

But that's getting ahead of ourselves.

Let's get our work surface set up.

It is always a good idea to use an ESD safe mat, or at the very least, an ESD strap to keep our components safe from static discharge.

The motherboard box makes a convenient platform to work on while we're getting our core components assembled.

Let's start with our CPU.

Open up the CPU socket cover by pushing down the arm and pulling a little bit away from the socket.

Then you can lift up the retention mechanism, being careful, of course, not to touch any of the delicate pins inside.

There's a couple of different ways to landmark the orientation of your CPU.

One is with the little triangle that's on both the corner of the CPU, as well as on the socket cover.

And the other is with these little notches right here.

Carefully place the CPU.

No pressure should be required here.

And then after installing it, I like to give it a little tiny wiggle to make sure that it's seated properly.

Now, we lower down the cover, lower down the arm and secure it.

The socket cover should pop off.

If it doesn't, just grab it.

And I like to store this inside my motherboard box in

case I ever need to send it back to the manufacturer later.

Now for our storage drive.

We chose the Patriot P300 NVMe.

It is nothing special.

It has no DRAM cache.

It's PCIe Gen 3, but for under 150 bucks, we were able to get a terabyte of storage.

And now that some games are starting to list NVMe storage as a requirement,

this gives us enough space for at least a few of those games in addition to our operating system.

You can drop down to 512 gigs here, but it's worth noting that the savings to capacity calculation is really not pretty.

Because this isn't a PCIe Gen 5 drive, we're gonna place it in one of the slower slots,

leaving our faster slot right under the CPU socket for a future upgrade.

Like when we installed our CPU, there's a little notch in the NVMe connector that lines up with the key on the motherboard slot.

Just slide it in at about a 25 to 30 degree angle,

then press it down and secure your NVMe drive in place using the included little plastic clip.

If you're following along at home with a different motherboard, it's worth noting that these mechanisms do vary a little bit.

Some use different plastic clips, others are held in place by the heat sink cover over top,

and others use these convenient teeny tiny little screws that will immediately get lost in high pile carpet.

Speaking of RAM, we specced our system with a 32 gig kit of Corsair Vengeance DDR5 6000 CL36.

It didn't arrive in time for our shoot today.

So we're using this similarly specced G-Skill kit in its place.

If 400 plus dollars is too rich for your blood upfront, a nice thing about going Intel by the way, is their memory controller tends to play a little bit nicer with four sticks.

So going for 16 gigs today and then upgrading later could be a good option for you.

This is also one of the areas where my previous recommendation to maybe drop down to AM4 to save some money

could pay off big.

32 gigs of DDR4 is only about $200 at the moment.

Installing RAM, regardless of which way you go, is pretty much the same across the board.

You gotta follow two laws.

The first is Sherrod's law, and that is that probably the labels will face inward toward the CPU socket where you are less likely to see them.

The second is if you don't want performance that's poor, install your RAM in slots two and four, counting from the CPU socket.

Neither of these are always true.

And if you wanna double check, you'll wanna consult your motherboard's manual for the recommended configs for your RAM.

To install it, all we've gotta do now

that we know where to put it

and how to orient it is place our thumbs firmly on both sides of the stick and push down until it clicks.

Takes a little bit more pressure than novice users are necessarily comfortable putting on it, but don't force it.

Now there's just one more piece before we install this in our case.

Our CPU is gonna need some cooling and we've already spent close to half of our budget.

So let's not overthink this and go with the Thermalright Assassin X120 Refined SE.

It's just $17.90 and should have no problem handling our 250KF.

Now our CPU uses the LGA1851 socket

and this cooler has been around for long enough

that you might end up with a version that doesn't mention compatibility with that socket.

Luckily for us, Intel kept the same specs between their LGA 1700 socket and the newer 1851.

So we can just follow the directions to mount LGA 1700.

This back plate has little sliders.

Adjust those to the 1700 position.

Then it goes on the back of the motherboard like so, poking just a little bit through the retention holes here.

Then we take our team blue spacers from the coolers accessories.

Then we grab our Intel screws, which look remarkably similar to the AMD screws.

You'll wanna look at the manual to see what I mean, but the thread on the AMD screws is a little fatter than the Intel ones.

Then grab these two brackets, which will end up basically framing your CPU once they're installed.

These should only fit one way.

Next, if our cooler doesn't have thermal paste pre-applied, we add a little kinda cooked grain of brown rice size dollop to the middle of the CPU,

then screw the cooler onto the mounting brackets, Just starting both sides before torquing them down,

attach the fan and plug it into the CPU fan power connector here at the top edge of the board.

While we're at it, if you like shiny lights, you can go ahead and plug in your addressable RGB header as well.

Like the CPU fan, it only goes in one way, don't force it.

Now, it's time to tuck these wires away and then get everything installed in a case.

I haven't actually seen the Gamdias Athena M4M case before, but it's 60 bucks at the moment,

100

has decent reviews, And it has plenty of room despite its small size for a beefy graphics card.

101

The first thing we're gonna do once we have our accessories

102

and packing materials out of the way is pop off all of our panels.

103

That's gonna make it a lot easier to build in.

104

I like stashing my panels back in the original box.

105

That way they're far less likely to, you know, be dropped.

106

Next, we're gonna make sure

107

that all of the motherboard standoffs are mounted in the correct places to line up with the mounting holes on our motherboard.

108

The easiest way to do that is to count them first, then put the motherboard down on top of them and count through the holes,

109

making sure that you can see a standoff through each hole.

110

If you have any extras, there's a very good chance they will scratch the traces on the back of the board, damaging or killing it.

111

With that out of the way, it's time to remember, just in the nick of time, to install our IO shield in the big rectangular opening at the back of the case.

112

Just line it up and then press down on each of the four corners.

113

Then do it again, because it probably didn't work on all of them the first time.

114

Now you can gently put your motherboard into place at about a 30 degree angle.

115

First lining up the rear IO, then placing the board down against the standoffs.

116

Make sure that you don't scrape it around.

117

Now's a great time to inspect the rear IO and make sure

118

that none of the little tabs on the IO shield ended up inside the ports.

119

That'll be about a 15 to 20 minute job to fix later if you don't catch it now.

120

With all of that good, you can secure the motherboard in place with the correct screws, and then it's time to get to wiring.

121

This is one of the trickiest parts of building a PC for new builders.

122

Pretty much any case, here we go.

123

It's gonna have kind of a bundle of wires and connectors coming from wherever the front IO is.

124

This one right here is for your front panel audio

125

and connects to the audio header that's usually on the bottom left corner of the motherboard.

126

This one and this one are for your case's front USB ports.

127

The big wide one is for your USB 3 type A and then this little, sometimes a ribbon cable one, is for your front USB type C.

128

Usually these connectors are either along the right-hand edge or along the bottom edge of the motherboard.

129

Next, it's time to plug in the front panel buttons.

130

If you're lucky, your power button, your reset, and their corresponding LEDs will all be molded into a single connector

131

that will have the same pinout as your motherboard.

132

If you're a little less lucky, you'll end up with a situation like this, where the system has a power and a reset button,

133

but doesn't appear to actually have a lead for the reset button.

134

We just have a little power switch button and then we have an LED switch button.

135

Oh, it's not a reset button!

136

It turns the lights on and off!

137

It goes to this fan and RGB controller hub in the back of the case here.

138

Anyway, for the power button, the polarity doesn't matter, so you just go ahead and put it on these two power pins right here.

139

And then for that hub, we're gonna go ahead and plug in one of the RGB leads, as well as a fan lead that is going to give it a PWM signal

140

so that all of the fans plugged into the hub will run at the same speed.

141

We'll deal with the SATA power connection later once we put in our power supply.

142

Now we're at a step that's gonna be a little unusual in this case.

143

Pun intended.

144

Our power supply.

145

Seasonic sponsored this video and sent over their Focus GX V4 ATX3 2024 850 watt 80 plus gold.

146

Word salad aside, What's not to like about it?

147

It's fully modular with a quiet 135 millimeter fan

148

and has industry-leading reliability That's backed up with a 10-year warranty

149

So your power supply is gonna live about as long as the average golden retriever all that for just $109.99

150

LTT Labs ran the 750 watt version through our full test suite and found that it performs

151

Just like Seasonic says it does so you can check

152

that out at the link in the video description as well as the link to this product

153

Now before we put it into our case, let's get out the appropriate cables for our build here.

154

It's much easier to connect these to the power supply now while it's outside the case than once we've

155

put it in here and then have to deal with this cable covering shroud.

156

We will need our 24 pin for our motherboard, an 8 pin for the CPU, let's throw in the 4 pin for the CPU as well,

157

and we will need a PCIe power cable for our GPU.

158

As for that hub in the back, we're gonna grab a SATA cable to plug that into.

159

All of these use the if it fits, I sits method of validation.

160

And with everything plugged into the power supply, we slip it in a little bit like so with the fan facing toward the side panel.

161

Tighten up the four screws at the top.

162

Then we need to plug in the pass through power cable

163

and flip the switch to the eye or on position on the power supply now.

164

Not that it really matters as much in this case, but Some small form factor cases, it can be really hard to get at that switch again after the fact.

165

Our motherboard cables route through the nearest cable management holes.

166

We're gonna leave our GPU connector here.

167

We'll plug that in shortly.

168

And our SATA cable plugs in here with all the excess tucking in behind this cute little door, which we can secure with a screw.

169

To wrap this step up, again, pun intended, we'll use these little loops on the back of the motherboard tray to strap down all of our cables.

170

But we're not gonna do that just yet, Because first, it's time for the PCIeS de la resistance of our build, our GPU.

171

We went with the ASUS Prime GeForce RTX 5070 Ti 16 gig.

172

And I hate it.

173

To be clear, I don't hate the GPU, I just hate that for $900, this isn't even the overclocked version.

174

Not that the 45 megahertz really matters.

175

I mean, the cooler's the same, and we can overclock it 1% if we really want to.

176

It's just that I remember when $900 bought you a top of the line GPU or even two of them in SLI.

177

But maybe there's a solution we're not seeing.

178

I mean, if creating my own headcanon made me happier about Star Wars, maybe it'll work here.

179

This is the top of the line GPU.

180

This is the top of the line GPU.

181

I mean, jokes aside, it does perform really well as you guys are about to see.

182

And with it as our centerpiece, our whole build came in at 1974 US dollars.

183

So we're talking 4K gaming for just under 2000 freedom bucks.

184

We just need to pop out these two PCIe slot covers at the back of the case to make room.

185

Then we line up our GPU with the PCIe 16X slot and give it a gentle push into place.

186

There may be an audible click, but there might not be.

187

Don't force anything.

188

You can always just check this clip at the back of the slot to see if it's engaged.

189

Then do a quick double check by the PCI bracket to ensure

190

that the fingers are sliding in between the motherboard and the back of the case.

191

If everything looks good, it's time to securely plug in our 12 volt two by six PCIe power connector, make sure that the little latch engages,

192

and then we can tidy up those excess cables.

193

Now let's just get this plugged in, Wired networking required.

194

We did not choose a motherboard with Wi-Fi.

195

And wish me luck.

196

Nice.

197

Not a bad looking little build, right?

198

This is actually, for how small this thing is, I am freaking really liking it.

199

We get nice fresh air coming across both our GPU and our CPU.

200

Just about the whole back of this thing.

201

Oh Top and other side are all mesh.

202

Let's see how she holds up.

203

Oh I will need a mouse pad.

204

Oh I will also need a wardrobe change

205

and I'll use both of those opportunities to show off cool

206

stuff from lttstore.com This is our map of Siberia desk pad Freakin awesome

207

and is full of little inside jokes and puns and This one is our fast fresh and fiber optic hoodie.

208

I just want to make sure XMP is enabled So we're getting the most out of our memory.

209

If we're gonna spend the damn money, I want the performance.

210

And right out of the gate, what a great experience.

211

We're looking at anywhere from around 50 to 60 FPS on average with lows that admittedly are dipping quite a bit lower,

212

but on a game that is meant to be enjoyed on a console, this is a more than adequate frame rate.

213

And the best part, I was to switch over to DLSS even at the quality setting.

214

Okay, now we're talking.

215

Average FPS around 80.

216

And DLSS quality these days is, it's pretty darn good.

217

Cyberpunk 2077 might be getting a little bit on the older side now, but it's still extremely demanding at high settings.

218

And that is exactly what we are running it at.

219

I'm talking ray tracing ultra, everything set to high.

220

Yes, we're using a little bit of resolution upscaling, But no,

221

we are not using any frame gen in order to get a nice solid 60 to 70 FPS average

222

and maybe more importantly, really consistent frame times with them sitting around 50 FPS on the minimums.

223

This is a very smooth gaming experience.

224

And just like with Expedition 33, I could absolutely tune things down a little bit more if I wanted like a hundred plus FPS.

225

Gotta say my head cannon is working out great here.

226

Who cares if the 5080 and the 5090 exist?

227

This is offering up a great gaming experience.

228

But how about we try something a little newer?

229

Forza Horizon 6.

230

Damn, that looks good. And smooth.

231

Over 100 FPS average, and we're dipping down to like, I think I saw as low as like 70, but that's not happening very often.

232

This is freaking great.

233

Okay, we are using a little bit of upscaling here.

234

Yeah, quality, but I think we can go further.

235

Maybe ultra with ray tracing?

236

Let's give it a shot.

237

Oh man, does that ever look more realistic though.

238

That is a, I have seen some differences between classic illumination and ray traced illumination before.

239

That was a pretty noticeable one.

240

and we're still getting like 77 FPS minimum.

241

More than enough for a racing game.

242

I already mentioned the system's like very reasonable in terms of noise too.

243

I'm right at the back of it, so this is the worst case scenario.

244

Here, hold on, I'm gonna let the game render.

245

Being around at the front where the window sits in between me and the noise making components.

246

Can you even catch it on my mic?

247

Yeah, it's very...

248

That's great.

249

You know, just for fun, let's see how many FPS we can get in something really light.

250

What is this?

251

400 FPS!

252

Let's gooooooo!

253

In conclusion, are things a little tough right now?

254

Yeah, they are.

255

But you can still build a butt-kicking 4K gaming machine that can rip up any AAA game on the market for under $2,000.

256

And, whether you're looking at something like that or something more entry level, our sponsor, Seasonic, has the power supply for you,

257

and they'll back it for longer than your system is likely to stay useful.

258

If you guys enjoyed this video, why not check out one of our past build guides, like the last guide you'll ever need.

259

It's a really helpful video if the system you're putting together doesn't happen to be using these exact components.

260

It gives you a lot of the principles for how to select parts and how to assemble just about anything.

ऐप डाउनलोड करें

धाराप्रवाह बोलने के लिए ज़रूरी सब कुछ

AI उच्चारण स्कोरहर वाक्य का स्कोर

IPA अभ्यासहर ध्वनि में महारत

शब्दावलीअपना शब्द भंडार बनाएँ

शब्द गेमखेलते हुए सीखें

QR स्कैन करें

Download on theApp Store Get it onGoogle Play

उसी चैनल से

Even Valve is Disappointed - Steam Machine Review

Daily ConversationWorking Adults

Stretching $5000 dollars to the limit - AMD $5000 Ultimate Tech Upgrade

Business EnglishUniversity StudentsWorking Adults

FOR YOU

अनुशंसित वीडियो

39 वाक्य

Expensive RTX 5090 for LLMs? NO. Use This Instead. (Tesla V100 SXM2 + Z8 G4, #RACERRRZ)

Daily ConversationUniversity StudentsWorking Adults

159 वाक्य

半导体女王 AMD CEO苏姿丰Lisa Su:AI未来10年新发现将超过去30年总和！如何创造属于自己的运气？

Business EnglishUniversity StudentsWorking Adults

180 वाक्य

Is AI Doom Real... or Just Good Marketing?

Business EnglishUniversity StudentsWorking Adults

इस पाठ की शब्दावली और बोलने के सुझाव

यह B2 स्तर का स्पीकिंग पाठ वीडियो “True 4k Gaming PC (2026) - Classic LTT Build Guide” पर आधारित है। इस वीडियो में शैडोइंग के लिए 260 वाक्य और 3551 शब्द हैं। बोला गया हिस्सा 20:05 लंबा है। वक्ता लगभग 177 शब्द प्रति मिनट की स्वाभाविक गति से बोलता है, जो रोज़मर्रा की बातचीत के करीब है। केवल 79% शब्द अंग्रेज़ी के 3,000 सबसे आम शब्दों में से हैं, इसलिए शब्दावली कठिन है।

इस वीडियो की मुख्य शब्दावली

वीडियो के 15 सबसे कठिन शब्द, उच्चारण और अर्थ के साथ:

शब्द	उच्चारण	अर्थ
motherboard संज्ञा	/ˈmʌðɚˌbɔɹd/	मदरबोर्ड
socket संज्ञा	/ˈsɑkɪt/	सॉकेट
trace संज्ञा	/tɹeɪs/	चिह्न
bracket संज्ञा	/ˈbɹækɪt/	कोष्ठक
illumination संज्ञा	/ɪˌlumɪˈneɪʃən/	दीप्ति, रोशनी
watt संज्ञा	/wɑt/	वॉट, वाट
strap संज्ञा	/stɹæp/	बद्धी
dip क्रिया	/dɪp/	डुबाना
controller संज्ञा	/kənˈtɹoʊlɚ/	लेखानियंत्रक
convenient विशेषण	/kənˈviː.niənt/	सुविधाजनक
scratch क्रिया	/skɹæt͡ʃ/	नोचना
graphics संज्ञा	/ˈɡɹæfɪks/	चित्रालेख, ग्राफ़िक्स
ample विशेषण	/ˈæm.pəl/	प्रचुर, पर्याप्त
tray संज्ञा	/tɹeɪ/	ट्रे, तश्तरी
calculation संज्ञा	/ˌkælkjuˈleɪʃn̩/	गणना, परिकलन

वीडियो में आने वाली फ़्रेज़ल वर्ब

शब्द	उच्चारण	अर्थ
go ahead क्रिया	/ˌɡoʊ əˈhɛd/	आगे बढ़ना

दोहराने लायक वाक्य

वीडियो के छोटे, पूरे वाक्य जिन्हें आप रोज़ की बातचीत में इस्तेमाल कर सकते हैं:

I mean, I wouldn't blame you for missing it.
Let's get our work surface set up.
It didn't arrive in time for our shoot today.
Make sure that you don't scrape it around.
Can you even catch it on my mic?

इस वीडियो का व्याकरण

वक्ता जिन संरचनाओं का सबसे अधिक प्रयोग करता है, वीडियो के असली शब्दों के साथ:

संरचना	वीडियो में
शर्त वाले वाक्य if + उपवाक्य, will/would + क्रिया — शर्त और उसका नतीजा	if you wanna double check, you'll wanna · If you're a little less lucky, you'll end
Passive voice be + past participle — ज़ोर इस पर कि क्या होता है, न कि कौन करता है	should be required · are held · be dropped
Present perfect have/has + past participle — बीता हुआ काम जिसका असर अभी भी है	have integrated · we've already spent · has been
Relative clauses who / which + उपवाक्य — व्यक्ति या वस्तु के बारे में अतिरिक्त जानकारी	anyone who didn · brackets, which will

ध्यान देने योग्य उच्चारण

वक्ता 91 बार संक्षिप्त रूपों का प्रयोग करता है, जैसे we're, gonna, doesn't। इन्हें वैसे ही छोटा बोलें जैसा आप सुनते हैं।

“th” की ध्वनियाँ: motherboard /ˈmʌðɚˌbɔɹd/, thumb /ˈθʌm/, thermal /ˈθɜːməl/
“sh” और “zh” की ध्वनियाँ: illumination /ɪˌlumɪˈneɪʃən/, retention /ɹɪˈtɛnʃən/, validation /ˌvæl.əˈdeɪ.ʃən/, mesh /mɛʃ/, calculation /ˌkælkjuˈleɪʃn̩/
लंबे शब्द — बलाघात सही रखें: illumination /ɪˌlumɪˈneɪʃən/, accessory /əkˈsɛs.(ə.)ɹi/, validation /ˌvæl.əˈdeɪ.ʃən/, remarkably /ɹɪˈmɑɹkəbli/, orientation /ˌɔː.ɹi.ənˈteɪ.ʃən/

हिंदी भाषियों के लिए मुश्किल ध्वनियाँ:

/v/ और /w/ का फ़र्क़ — /v/ में ऊपर के दाँत निचले होंठ को छूते हैं, /w/ में होंठ गोल होते हैं: watt /wɑt/, convenient /kənˈviː.niənt/, validation /ˌvæl.əˈdeɪ.ʃən/, warranty /ˈwɔɹ.ən.ti/, variant /ˈvæɹi.ənt/
शब्द की शुरुआत में s + व्यंजन — पहले “इ” न जोड़ें: slot /slɑt/, standoff /ˈstændɔf/, spec /ˈspɛk/, strap /stɹæp/, sponsor /ˈspɒn.səː/
/æ/ — “ऐ” से ज़्यादा खुला: bracket /ˈbɹækɪt/, standoff /ˈstændɔf/, strap /stɹæp/, scratch /skɹæt͡ʃ/, graphics /ˈɡɹæfɪks/

इस वीडियो से अभ्यास कैसे करें

पहले बिना बोले पूरा वीडियो एक बार सुनें और जो शब्द नहीं आते उन्हें लिख लें।
0.75× गति से शुरू करें, एक-एक वाक्य की शैडोइंग करें, और सहज लगने पर सामान्य गति पर लौटें।
अपनी आवाज़ रिकॉर्ड करें और मूल से तुलना करें, ख़ासकर motherboard, socket, trace जैसे शब्दों पर ध्यान दें।

शैडोइंग तकनीक क्या है?

शैडोइंग (Shadowing) एक विज्ञान-समर्थित भाषा सीखने की तकनीक है जो मूल रूप से पेशेवर दुभाषिया प्रशिक्षण के लिए विकसित की गई थी। विधि सरल लेकिन शक्तिशाली है: आप मूल अंग्रेज़ी ऑडियो सुनते हैं और तुरंत इसे ज़ोर से दोहराते हैं — जैसे वक्ता की छाया 1-2 सेकंड की देरी से। शोध से पता चलता है कि यह उच्चारण सटीकता, स्वर, लय, जुड़ी हुई ध्वनियाँ, सुनने की समझ और बोलने की प्रवाहशीलता में काफ़ी सुधार करता है।

शैडोइंग तकनीक: पूरी चरण-दर-चरण गाइड पढ़ें →

शैडोइंग अभ्यास: True 4k Gaming PC (2026) - Classic LTT Build Guide - वीडियो के साथ अंग्रेजी बोलना सीखें

अभ्यास मोड चुनें

ऐप डाउनलोड करें

उसी चैनल से

I Built a Fake Home Theater…

My Son Needs a New Laptop

Even Valve is Disappointed - Steam Machine Review

USB4 is a Glorious Mess

Stretching $5000 dollars to the limit - AMD $5000 Ultimate Tech Upgrade

अनुशंसित वीडियो

Intel chips can’t possibly be this bad… 100% crash rate?

BEST Budget Mouse of 2026? ATK A9 Mini+ Review (shocking)

Mac vs Windows - It's not close in 2026!

I tried gaming on Linux...

Top 4 Humanoid Robots Set to Dominate 2026 | The Future of AI & Robotics

This Is A New 960hp V8 British Muscle Car! | 4K

I bought the most SATISFYING TECH on the internet.

I might have found the BEST budget router...

Should You Build Your Own Keyboard?

Expensive RTX 5090 for LLMs? NO. Use This Instead. (Tesla V100 SXM2 + Z8 G4, #RACERRRZ)

半导体女王 AMD CEO苏姿丰Lisa Su:AI未来10年新发现将超过去30年总和！如何创造属于自己的运气？

Is AI Doom Real... or Just Good Marketing?

इस पाठ की शब्दावली और बोलने के सुझाव

इस वीडियो की मुख्य शब्दावली

वीडियो में आने वाली फ़्रेज़ल वर्ब

दोहराने लायक वाक्य

इस वीडियो का व्याकरण

ध्यान देने योग्य उच्चारण

इस वीडियो से अभ्यास कैसे करें

शैडोइंग तकनीक क्या है?