تدريب Shadowing: True 4k Gaming PC (2026) - Classic LTT Build Guide - تعلم التحدث بالإنجليزية عبر الفيديو
اختر وضع التدريب
كل وضع يفتح غرفة تدريب بملء الشاشة.
260 جمل
إذا كانت الجمل قصيرة أو طويلة جدًا، انقر على Edit لتعديلها.
1
This is a 4K gaming PC.
2
At least according to Valve, but by that logic, anything with a 4K HDMI port is a 4K gaming machine, depending on the games you run.
3
But that's not what you and I mean when we say 4K gaming PC.
4
And today's build, powered by Seasonic, is for real 4K gaming, but without spending any more money than we absolutely have to.
5
So, with that in mind, let's dive right in with a choice
6
that is going to Blow the mind of anyone who didn't notice that Intel quietly snuck into the lead for bang-for-the-butt gaming.
7
I mean, I wouldn't blame you for missing it.
8
Their Core Ultra 200 series first landed on the market like a wet dog fart,
9
somehow offering worse performance in gaming than their predecessors.
10
But the similarly named Core Ultra 200 Plus series...
11
Devils in the details.
12
It's a lot more than a mid-cycle refresh, and the 250KF Plus makes a strong argument for itself with
13
six powerful P cores that'll boost up to 5.3 GHz for our games, and then another 12 E cores to handle everything else.
14
Intel did recently increase pricing on the Plus series, allegedly due to strong demand, but we can counter some of that by choosing the F variant,
15
which doesn't have integrated graphics.
16
Now it's worth noting that if you wanna squeeze the most performance out of every penny, you can drop your CPU selection down to AMD's Ryzen 5 5600X.
17
The chip itself is not a bargain, but AM4 motherboards and DDR4 are.
18
And once you ramp up the resolution, CPU bottlenecks are less of a concern.
19
But still guys, we'd be talking about a nearly six year old chip in a 10 year old socket.
20
And I personally feel that the 250KF Plus is worth the extra scratch, especially because it's not that much extra for the platform overall.
21
At $110, ASRock's B860M Pro A feels like kind of a return to sanity in motherboard pricing.
22
You won't get much in the way of extras or frills, but it features solid power delivery, high-speed USB and 2.5 gig networking, and ample M.2 storage expansion slots,
23
though at current pricing, I think we'll probably just populate one of them.
24
But that's getting ahead of ourselves.
25
Let's get our work surface set up.
26
It is always a good idea to use an ESD safe mat, or at the very least, an ESD strap to keep our components safe from static discharge.
27
The motherboard box makes a convenient platform to work on while we're getting our core components assembled.
28
Let's start with our CPU.
29
Open up the CPU socket cover by pushing down the arm and pulling a little bit away from the socket.
30
Then you can lift up the retention mechanism, being careful, of course, not to touch any of the delicate pins inside.
31
There's a couple of different ways to landmark the orientation of your CPU.
32
One is with the little triangle that's on both the corner of the CPU, as well as on the socket cover.
33
And the other is with these little notches right here.
34
Carefully place the CPU.
35
No pressure should be required here.
36
And then after installing it, I like to give it a little tiny wiggle to make sure that it's seated properly.
37
Now, we lower down the cover, lower down the arm and secure it.
38
The socket cover should pop off.
39
If it doesn't, just grab it.
40
And I like to store this inside my motherboard box in
41
case I ever need to send it back to the manufacturer later.
42
Now for our storage drive.
43
We chose the Patriot P300 NVMe.
44
It is nothing special.
45
It has no DRAM cache.
46
It's PCIe Gen 3, but for under 150 bucks, we were able to get a terabyte of storage.
47
And now that some games are starting to list NVMe storage as a requirement,
48
this gives us enough space for at least a few of those games in addition to our operating system.
49
You can drop down to 512 gigs here, but it's worth noting that the savings to capacity calculation is really not pretty.
50
Because this isn't a PCIe Gen 5 drive, we're gonna place it in one of the slower slots,
51
leaving our faster slot right under the CPU socket for a future upgrade.
52
Like when we installed our CPU, there's a little notch in the NVMe connector that lines up with the key on the motherboard slot.
53
Just slide it in at about a 25 to 30 degree angle,
54
then press it down and secure your NVMe drive in place using the included little plastic clip.
55
If you're following along at home with a different motherboard, it's worth noting that these mechanisms do vary a little bit.
56
Some use different plastic clips, others are held in place by the heat sink cover over top,
57
and others use these convenient teeny tiny little screws that will immediately get lost in high pile carpet.
58
Speaking of RAM, we specced our system with a 32 gig kit of Corsair Vengeance DDR5 6000 CL36.
59
It didn't arrive in time for our shoot today.
60
So we're using this similarly specced G-Skill kit in its place.
61
If 400 plus dollars is too rich for your blood upfront, a nice thing about going Intel by the way, is their memory controller tends to play a little bit nicer with four sticks.
62
So going for 16 gigs today and then upgrading later could be a good option for you.
63
This is also one of the areas where my previous recommendation to maybe drop down to AM4 to save some money
64
could pay off big.
65
32 gigs of DDR4 is only about $200 at the moment.
66
Installing RAM, regardless of which way you go, is pretty much the same across the board.
67
You gotta follow two laws.
68
The first is Sherrod's law, and that is that probably the labels will face inward toward the CPU socket where you are less likely to see them.
69
The second is if you don't want performance that's poor, install your RAM in slots two and four, counting from the CPU socket.
70
Neither of these are always true.
71
And if you wanna double check, you'll wanna consult your motherboard's manual for the recommended configs for your RAM.
72
To install it, all we've gotta do now
73
that we know where to put it
74
and how to orient it is place our thumbs firmly on both sides of the stick and push down until it clicks.
75
Takes a little bit more pressure than novice users are necessarily comfortable putting on it, but don't force it.
76
Now there's just one more piece before we install this in our case.
77
Our CPU is gonna need some cooling and we've already spent close to half of our budget.
78
So let's not overthink this and go with the Thermalright Assassin X120 Refined SE.
79
It's just $17.90 and should have no problem handling our 250KF.
80
Now our CPU uses the LGA1851 socket
81
and this cooler has been around for long enough
82
that you might end up with a version that doesn't mention compatibility with that socket.
83
Luckily for us, Intel kept the same specs between their LGA 1700 socket and the newer 1851.
84
So we can just follow the directions to mount LGA 1700.
85
This back plate has little sliders.
86
Adjust those to the 1700 position.
87
Then it goes on the back of the motherboard like so, poking just a little bit through the retention holes here.
88
Then we take our team blue spacers from the coolers accessories.
89
Then we grab our Intel screws, which look remarkably similar to the AMD screws.
90
You'll wanna look at the manual to see what I mean, but the thread on the AMD screws is a little fatter than the Intel ones.
91
Then grab these two brackets, which will end up basically framing your CPU once they're installed.
92
These should only fit one way.
93
Next, if our cooler doesn't have thermal paste pre-applied, we add a little kinda cooked grain of brown rice size dollop to the middle of the CPU,
94
then screw the cooler onto the mounting brackets, Just starting both sides before torquing them down,
95
attach the fan and plug it into the CPU fan power connector here at the top edge of the board.
96
While we're at it, if you like shiny lights, you can go ahead and plug in your addressable RGB header as well.
97
Like the CPU fan, it only goes in one way, don't force it.
98
Now, it's time to tuck these wires away and then get everything installed in a case.
99
I haven't actually seen the Gamdias Athena M4M case before, but it's 60 bucks at the moment,
100
has decent reviews, And it has plenty of room despite its small size for a beefy graphics card.
101
The first thing we're gonna do once we have our accessories
102
and packing materials out of the way is pop off all of our panels.
103
That's gonna make it a lot easier to build in.
104
I like stashing my panels back in the original box.
105
That way they're far less likely to, you know, be dropped.
106
Next, we're gonna make sure
107
that all of the motherboard standoffs are mounted in the correct places to line up with the mounting holes on our motherboard.
108
The easiest way to do that is to count them first, then put the motherboard down on top of them and count through the holes,
109
making sure that you can see a standoff through each hole.
110
If you have any extras, there's a very good chance they will scratch the traces on the back of the board, damaging or killing it.
111
With that out of the way, it's time to remember, just in the nick of time, to install our IO shield in the big rectangular opening at the back of the case.
112
Just line it up and then press down on each of the four corners.
113
Then do it again, because it probably didn't work on all of them the first time.
114
Now you can gently put your motherboard into place at about a 30 degree angle.
115
First lining up the rear IO, then placing the board down against the standoffs.
116
Make sure that you don't scrape it around.
117
Now's a great time to inspect the rear IO and make sure
118
that none of the little tabs on the IO shield ended up inside the ports.
119
That'll be about a 15 to 20 minute job to fix later if you don't catch it now.
120
With all of that good, you can secure the motherboard in place with the correct screws, and then it's time to get to wiring.
121
This is one of the trickiest parts of building a PC for new builders.
122
Pretty much any case, here we go.
123
It's gonna have kind of a bundle of wires and connectors coming from wherever the front IO is.
124
This one right here is for your front panel audio
125
and connects to the audio header that's usually on the bottom left corner of the motherboard.
126
This one and this one are for your case's front USB ports.
127
The big wide one is for your USB 3 type A and then this little, sometimes a ribbon cable one, is for your front USB type C.
128
Usually these connectors are either along the right-hand edge or along the bottom edge of the motherboard.
129
Next, it's time to plug in the front panel buttons.
130
If you're lucky, your power button, your reset, and their corresponding LEDs will all be molded into a single connector
131
that will have the same pinout as your motherboard.
132
If you're a little less lucky, you'll end up with a situation like this, where the system has a power and a reset button,
133
but doesn't appear to actually have a lead for the reset button.
134
We just have a little power switch button and then we have an LED switch button.
135
Oh, it's not a reset button!
136
It turns the lights on and off!
137
It goes to this fan and RGB controller hub in the back of the case here.
138
Anyway, for the power button, the polarity doesn't matter, so you just go ahead and put it on these two power pins right here.
139
And then for that hub, we're gonna go ahead and plug in one of the RGB leads, as well as a fan lead that is going to give it a PWM signal
140
so that all of the fans plugged into the hub will run at the same speed.
141
We'll deal with the SATA power connection later once we put in our power supply.
142
Now we're at a step that's gonna be a little unusual in this case.
143
Pun intended.
144
Our power supply.
145
Seasonic sponsored this video and sent over their Focus GX V4 ATX3 2024 850 watt 80 plus gold.
146
Word salad aside, What's not to like about it?
147
It's fully modular with a quiet 135 millimeter fan
148
and has industry-leading reliability That's backed up with a 10-year warranty
149
So your power supply is gonna live about as long as the average golden retriever all that for just $109.99
150
LTT Labs ran the 750 watt version through our full test suite and found that it performs
151
Just like Seasonic says it does so you can check
152
that out at the link in the video description as well as the link to this product
153
Now before we put it into our case, let's get out the appropriate cables for our build here.
154
It's much easier to connect these to the power supply now while it's outside the case than once we've
155
put it in here and then have to deal with this cable covering shroud.
156
We will need our 24 pin for our motherboard, an 8 pin for the CPU, let's throw in the 4 pin for the CPU as well,
157
and we will need a PCIe power cable for our GPU.
158
As for that hub in the back, we're gonna grab a SATA cable to plug that into.
159
All of these use the if it fits, I sits method of validation.
160
And with everything plugged into the power supply, we slip it in a little bit like so with the fan facing toward the side panel.
161
Tighten up the four screws at the top.
162
Then we need to plug in the pass through power cable
163
and flip the switch to the eye or on position on the power supply now.
164
Not that it really matters as much in this case, but Some small form factor cases, it can be really hard to get at that switch again after the fact.
165
Our motherboard cables route through the nearest cable management holes.
166
We're gonna leave our GPU connector here.
167
We'll plug that in shortly.
168
And our SATA cable plugs in here with all the excess tucking in behind this cute little door, which we can secure with a screw.
169
To wrap this step up, again, pun intended, we'll use these little loops on the back of the motherboard tray to strap down all of our cables.
170
But we're not gonna do that just yet, Because first, it's time for the PCIeS de la resistance of our build, our GPU.
171
We went with the ASUS Prime GeForce RTX 5070 Ti 16 gig.
172
And I hate it.
173
To be clear, I don't hate the GPU, I just hate that for $900, this isn't even the overclocked version.
174
Not that the 45 megahertz really matters.
175
I mean, the cooler's the same, and we can overclock it 1% if we really want to.
176
It's just that I remember when $900 bought you a top of the line GPU or even two of them in SLI.
177
But maybe there's a solution we're not seeing.
178
I mean, if creating my own headcanon made me happier about Star Wars, maybe it'll work here.
179
This is the top of the line GPU.
180
This is the top of the line GPU.
181
I mean, jokes aside, it does perform really well as you guys are about to see.
182
And with it as our centerpiece, our whole build came in at 1974 US dollars.
183
So we're talking 4K gaming for just under 2000 freedom bucks.
184
We just need to pop out these two PCIe slot covers at the back of the case to make room.
185
Then we line up our GPU with the PCIe 16X slot and give it a gentle push into place.
186
There may be an audible click, but there might not be.
187
Don't force anything.
188
You can always just check this clip at the back of the slot to see if it's engaged.
189
Then do a quick double check by the PCI bracket to ensure
190
that the fingers are sliding in between the motherboard and the back of the case.
191
If everything looks good, it's time to securely plug in our 12 volt two by six PCIe power connector, make sure that the little latch engages,
192
and then we can tidy up those excess cables.
193
Now let's just get this plugged in, Wired networking required.
194
We did not choose a motherboard with Wi-Fi.
195
And wish me luck.
196
Nice.
197
Not a bad looking little build, right?
198
This is actually, for how small this thing is, I am freaking really liking it.
199
We get nice fresh air coming across both our GPU and our CPU.
200
Just about the whole back of this thing.
201
Oh Top and other side are all mesh.
202
Let's see how she holds up.
203
Oh I will need a mouse pad.
204
Oh I will also need a wardrobe change
205
and I'll use both of those opportunities to show off cool
206
stuff from lttstore.com This is our map of Siberia desk pad Freakin awesome
207
and is full of little inside jokes and puns and This one is our fast fresh and fiber optic hoodie.
208
I just want to make sure XMP is enabled So we're getting the most out of our memory.
209
If we're gonna spend the damn money, I want the performance.
210
And right out of the gate, what a great experience.
211
We're looking at anywhere from around 50 to 60 FPS on average with lows that admittedly are dipping quite a bit lower,
212
but on a game that is meant to be enjoyed on a console, this is a more than adequate frame rate.
213
And the best part, I was to switch over to DLSS even at the quality setting.
214
Okay, now we're talking.
215
Average FPS around 80.
216
And DLSS quality these days is, it's pretty darn good.
217
Cyberpunk 2077 might be getting a little bit on the older side now, but it's still extremely demanding at high settings.
218
And that is exactly what we are running it at.
219
I'm talking ray tracing ultra, everything set to high.
220
Yes, we're using a little bit of resolution upscaling, But no,
221
we are not using any frame gen in order to get a nice solid 60 to 70 FPS average
222
and maybe more importantly, really consistent frame times with them sitting around 50 FPS on the minimums.
223
This is a very smooth gaming experience.
224
And just like with Expedition 33, I could absolutely tune things down a little bit more if I wanted like a hundred plus FPS.
225
Gotta say my head cannon is working out great here.
226
Who cares if the 5080 and the 5090 exist?
227
This is offering up a great gaming experience.
228
But how about we try something a little newer?
229
Forza Horizon 6.
230
Damn, that looks good. And smooth.
231
Over 100 FPS average, and we're dipping down to like, I think I saw as low as like 70, but that's not happening very often.
232
This is freaking great.
233
Okay, we are using a little bit of upscaling here.
234
Yeah, quality, but I think we can go further.
235
Maybe ultra with ray tracing?
236
Let's give it a shot.
237
Oh man, does that ever look more realistic though.
238
That is a, I have seen some differences between classic illumination and ray traced illumination before.
239
That was a pretty noticeable one.
240
and we're still getting like 77 FPS minimum.
241
More than enough for a racing game.
242
I already mentioned the system's like very reasonable in terms of noise too.
243
I'm right at the back of it, so this is the worst case scenario.
244
Here, hold on, I'm gonna let the game render.
245
Being around at the front where the window sits in between me and the noise making components.
246
Can you even catch it on my mic?
247
Yeah, it's very...
248
That's great.
249
You know, just for fun, let's see how many FPS we can get in something really light.
250
What is this?
251
400 FPS!
252
Let's gooooooo!
253
In conclusion, are things a little tough right now?
254
Yeah, they are.
255
But you can still build a butt-kicking 4K gaming machine that can rip up any AAA game on the market for under $2,000.
256
And, whether you're looking at something like that or something more entry level, our sponsor, Seasonic, has the power supply for you,
257
and they'll back it for longer than your system is likely to stay useful.
258
If you guys enjoyed this video, why not check out one of our past build guides, like the last guide you'll ever need.
259
It's a really helpful video if the system you're putting together doesn't happen to be using these exact components.
260
It gives you a lot of the principles for how to select parts and how to assemble just about anything.
تنزيل التطبيق
كل ما تحتاجه للتحدث بطلاقة
تقييم النطق بالذكاء الاصطناعيتقييم كل جملة
تدريب IPAأتقن كل صوت
المفرداتابنِ رصيدك من الكلمات
لعبة المفرداتتعلّم أثناء اللعب
نفس القناة
B25
I Built a Fake Home Theater…
Daily ConversationWorking Adults
B21
My Son Needs a New Laptop
Daily ConversationWorking Adults
B23
Even Valve is Disappointed - Steam Machine Review
Daily ConversationWorking Adults
C12
USB4 is a Glorious Mess
Daily ConversationWorking Adults
B2Stretching $5000 dollars to the limit - AMD $5000 Ultimate Tech Upgrade
Business EnglishUniversity StudentsWorking Adults
FOR YOU
فيديو موصى به
B26
39 جمل
Intel chips can’t possibly be this bad… 100% crash rate?
American AccentBusiness EnglishUniversity StudentsWorking Adults
B22
124 جمل
BEST Budget Mouse of 2026? ATK A9 Mini+ Review (shocking)
Business EnglishUniversity StudentsWorking Adults
B22
275 جمل
Mac vs Windows - It's not close in 2026!
British AccentBusiness EnglishUniversity StudentsWorking Adults
B24
109 جمل
I tried gaming on Linux...
Business EnglishUniversity StudentsWorking Adults
B22
65 جمل
Top 4 Humanoid Robots Set to Dominate 2026 | The Future of AI & Robotics
Business EnglishUniversity StudentsWorking Adults
B2118 جمل
This Is A New 960hp V8 British Muscle Car! | 4K
British AccentBusiness EnglishUniversity StudentsWorking Adults
B25
450 جمل
I bought the most SATISFYING TECH on the internet.
British AccentBusiness EnglishDaily ConversationUniversity Students
B22
243 جمل
I might have found the BEST budget router...
Business EnglishUniversity StudentsWorking Adults
B23
125 جمل
Should You Build Your Own Keyboard?
Business EnglishUniversity StudentsWorking Adults
C11
462 جمل
Expensive RTX 5090 for LLMs? NO. Use This Instead. (Tesla V100 SXM2 + Z8 G4, #RACERRRZ)
Daily ConversationUniversity StudentsWorking Adults
B23
159 جمل
半导体女王 AMD CEO苏姿丰Lisa Su:AI未来10年新发现将超过去30年总和！如何创造属于自己的运气？
Business EnglishUniversity StudentsWorking Adults
B24
180 جمل
Is AI Doom Real... or Just Good Marketing?
Business EnglishUniversity StudentsWorking Adults
المفردات وملاحظات التحدث لهذا الدرس
هذا الدرس في المحادثة بمستوى B2 مبني على الفيديو “True 4k Gaming PC (2026) - Classic LTT Build Guide”. يحتوي هذا الفيديو على 260 جملة و3551 كلمة للتدرب على الترديد. مدة الكلام 20:05. يتكلم المتحدث بسرعة طبيعية، نحو 177 كلمة في الدقيقة، قريبة من المحادثة اليومية. 79% فقط من الكلمات ضمن أكثر 3,000 كلمة شيوعًا في الإنجليزية، فالمفردات صعبة نسبيًا.
أهم المفردات في هذا الفيديو
أصعب 15 كلمة في الفيديو، مع النطق والمعنى:
| الكلمة | النطق | المعنى |
|---|---|---|
| motherboard اسم | /ˈmʌðɚˌbɔɹd/ | اللَّوْحَةُ الأُمّ |
| socket اسم | /ˈsɑkɪt/ | مَقْبِس |
| plug اسم | /plʌɡ/ | قَابِس, فِيشَة |
| install فعل | /ɪnˈstɔl/ | رَكَّبَ |
| trace اسم | /tɹeɪs/ | أَثَر |
| bracket اسم | /ˈbɹækɪt/ | قَوْس |
| gig اسم | /ɡɪɡ/ | حَفْلَة |
| buck اسم | /ˈbʌk/ | وَعْل, كَبْش |
| illumination اسم | /ɪˌlumɪˈneɪʃən/ | إِضَاءَة |
| accessory اسم | /əkˈsɛs.(ə.)ɹi/ | أَكْسِسْوَار |
| watt اسم | /wɑt/ | وَاط |
| strap اسم | /stɹæp/ | حِزَام |
| retention اسم | /ɹɪˈtɛnʃən/ | حِفْظ |
| sponsor اسم | /ˈspɒn.səː/ | رَاعٍ |
| dip فعل | /dɪp/ | غَمَس, غَمَر |
الأفعال المركبة التي ستسمعها
| الكلمة | المعنى |
|---|---|
| lift up فعل | رَفَعَ |
| pass through فعل | اِخْتَرَقَ, نَفَذَ |
| show off فعل | تَفَاخَر, تَبَاهَى |
جمل تستحق التكرار
جمل قصيرة وكاملة من الفيديو يمكنك استخدامها في الحديث اليومي:
- I mean, I wouldn't blame you for missing it.
- Let's get our work surface set up.
- It didn't arrive in time for our shoot today.
- Make sure that you don't scrape it around.
- Can you even catch it on my mic?
القواعد في هذا الفيديو
أكثر التراكيب التي يستخدمها المتحدث، مع العبارات نفسها من الفيديو:
| التركيب | في الفيديو |
|---|---|
| الجمل الشرطية if + جملة، will/would + فعل — شرط ونتيجته | if you wanna double check, you'll wanna · If you're a little less lucky, you'll end |
| المبني للمجهول be + اسم المفعول — التركيز على ما يحدث لا على من يفعله | should be required · are held · be dropped |
| المضارع التام have/has + اسم المفعول — حدث ماضٍ ما زال له أثر الآن | have integrated · we've already spent · has been |
| جمل الوصل who / which + جملة — معلومة إضافية عن شخص أو شيء | anyone who didn · brackets, which will |
نطق يحتاج إلى انتباه
يستخدم المتحدث 91 من الصيغ المختصرة، مثل we're, gonna, doesn't. انطقها بصيغتها القصيرة كما تسمعها.
- أصوات “th”: motherboard /ˈmʌðɚˌbɔɹd/, thumb /ˈθʌm/, thermal /ˈθɜːməl/
- أصوات “sh” و“zh”: illumination /ɪˌlumɪˈneɪʃən/, retention /ɹɪˈtɛnʃən/, validation /ˌvæl.əˈdeɪ.ʃən/, mesh /mɛʃ/, calculation /ˌkælkjuˈleɪʃn̩/
- الكلمات الطويلة — انتبه لموضع النبر: illumination /ɪˌlumɪˈneɪʃən/, accessory /əkˈsɛs.(ə.)ɹi/, validation /ˌvæl.əˈdeɪ.ʃən/, remarkably /ɹɪˈmɑɹkəbli/, orientation /ˌɔː.ɹi.ənˈteɪ.ʃən/
أصوات يجدها متحدثو العربية صعبة:
- /p/ — ليس /b/: انطقه مع نفخة هواء: plug /plʌɡ/, spec /ˈspɛk/, strap /stɹæp/, sponsor /ˈspɒn.səː/, dip /dɪp/
- /v/ — ليس /f/: مع اهتزاز الأوتار الصوتية: convenient /kənˈviː.niənt/, validation /ˌvæl.əˈdeɪ.ʃən/, variant /ˈvæɹi.ənt/, dive /daɪv/
- تتابع الصوامت — لا تضف حركة بينها: motherboard /ˈmʌðɚˌbɔɹd/, plug /plʌɡ/, slot /slɑt/, install /ɪnˈstɔl/, trace /tɹeɪs/
كيف تتدرب بهذا الفيديو
- استمع إلى الفيديو كاملًا مرة واحدة دون أن تتكلم، ودوّن الكلمات التي لا تعرفها.
- ابدأ بسرعة 0.75×، وردّد جملة جملة، ثم عُد إلى السرعة العادية عندما يصبح الأمر سهلًا.
- سجّل صوتك وقارنه بالأصل، مع الانتباه إلى كلمات مثل motherboard, socket, plug.
ما هي تقنية التظليل الصوتي؟
التظليل الصوتي (Shadowing) تقنية تعلم لغة مدعومة علمياً، طُورت أصلاً لتدريب المترجمين الفوريين المحترفين. الطريقة بسيطة لكنها قوية: تستمع لصوت إنجليزي أصلي وتكرره فوراً بصوت عالٍ — كظل يتبع المتحدث بتأخير 1-2 ثانية. تُظهر الأبحاث تحسناً كبيراً في دقة النطق والتنغيم والإيقاع وربط الأصوات والاستماع والطلاقة.