쉐도잉 연습: Bioprocessing Part 1: Fermentation - 영상으로 영어 말하기 배우기
연습 모드 선택
각 모드는 전체 화면 연습실로 열립니다.
128 문장
문장이 너무 짧거나 길면 Edit를 눌러 조정하세요.
1
we all know something about fermentation it's a process used countless times each day to make a variety of dairy products,
2
baked goods, and beverages.
3
We sometimes think of it as letting foods go bad, but in a controlled way.
4
With a little help, milk becomes yogurt, bread rises, and grains decompose,
5
creating alcoholic beverages and alternative fuels.
6
But looking at these examples only gives us a clue as to what's really happening,
7
and how we can use the power of fermentation to cost -effectively create a broad array of biological products. So, what is fermentation?
8
A cell can be thought of as a microfactory.
9
These cells can be bacteria, fungi, or specific cells from mammals, plants, or insects.
10
In biotechnology, these cells are used to manufacture a product in a process called fermentation.
11
For yogurt, buttermilk, and cheese, we use bacteria.
12
To make breads and alcoholic beverages, we use yeast, a fungus.
13
And the production of some vaccines require the growth of mammalian cells that are infected with a specific virus.
14
The product the cells manufacture is usually a chemical the cells contain naturally,
15
or a substance that the cells have been genetically altered to create, or even a metabolic waste product of the organism's growth,
16
like one of our examples, alcohol.
17
There are too many everyday products created by commercial scale fermentation to even list, but some common ones include amino acids,
18
biopharmaceuticals, dyes, enzymes, food products, lipids, steroids, and vitamins.
19
Fermentation is a reasonably simple process.
20
A cell is selected based on its ability to produce the desired product.
21
A seed stock of cells is put into a small amount of media.
22
Media provides the nutritional products the cell needs to grow.
23
When the population of cells has grown and consumed most of the nutrients, it's moved into a larger vessel with more growth media,
24
and the process repeats.
25
This scaling up is complete when the quantity of cells is large
26
and healthy enough to transfer into a production vessel often referred to as a bioreactor
27
or fermenter with plenty of fresh media now available
28
and under tightly controlled conditions the cells grow and manufacture product
29
when the fermentation is complete the product is harvested fermentation is known as an upstream biotechnology process
30
it occurs early in the production flow before recovery, purification, formulation, filling, and packaging.
31
To better understand the fermentation process, we should first find out a little bit about the cells we use
32
and what they may require to reproduce and stay healthy.
33
Different cells have different needs.
34
Some are aerobic, they need oxygen, while others are anaerobic and do not require oxygen.
35
All cells require nutrition.
36
A properly formulated media contains the necessary nutrients to allow cells to grow and produce.
37
The fermenter mixes the cells evenly throughout the media to suspend the cells and supply the oxygen necessary for growth.
38
Effective and efficient fermentation requires rigorous monitoring and control of the environment within the bioreactor.
39
Key factors include temperature, pressure, pH, which is a measure of how acidic or alkaline the media is,
40
oxygen, usually measured as dissolved oxygen within the media, and nutrient levels.
41
Although the environment and the media are tailored to the needs of specific cells, the life cycle of almost all batches follows a predictable pattern.
42
The growth pattern has four phases, lag, exponential or log.
43
stationary, and death.
44
When a cell is first introduced to fresh media, it has to adapt to its new environment.
45
This creates a lull or lag in the growth timeline.
46
After the organism adapts, the batch takes off.
47
The cells begin dividing at a constant rate, an exponential or logarithmic or log increase,
48
doubling, then doubling again, and on and on.
49
As the nutrients in the media are consumed, toxic metabolic waste products build up, cells begin to die, and growth slows.
50
When it reaches the point that just as many cells are dying as are dividing, the batch enters the stationary phase.
51
This is the point at which the key nutrients are completely consumed, the fermentation is stopped, and the fermented broth is harvested.
52
If the fermentation were allowed to continue, the cells would enter the death phase.
53
More cells die than divide.
54
And, similar to the exponential phase, the death rate increases logarithmically.
55
Now that we have a basic understanding of how fermentation works, let's look at an actual process and see how it all comes together.
56
For our sample process, we will look at the production of Green Fluorescent Protein, or GFP.
57
GFP is broadly used as a biological marker.
58
It's a fluorescent dye that's very well tolerated by most cells and doesn't interfere with normal cellular function.
59
In the GFP fermentation process, we'll need to add an antibiotic to protect the purity of the batch, and then, late in the process,
60
a biochemical inducer to turn on the GFP gene.
61
Our materials for this process will include a bacteria seed stock, in this case E coli,
62
that has been genetically enhanced to produce GFP.
63
The basic ingredients for a compatible media which include nutrients, stabilizers, an antibiotic, and an anti -foaming agent,
64
and IPTG, which is the biochemical inducer that switches on the GFP gene.
65
The equipment that we'll be using includes a 300 -liter bioreactor, a UV -Vis spectrophotometer to monitor the optical density,
66
which is a measure of the concentration of cells in the bioreactor, a glucose analyzer to measure glucose,
67
a key nutrient, an offline pH meter to help track the acid -base balance and adjust online measurements if needed,
68
and a broth tank for our final product.
69
The bioreactor is equipped with a water jacket around the vessel to regulate temperature and integrated sensors to monitor key environmental factors,
70
including dissolved oxygen, pH, internal temperature, water jacket temperature, and vessel pressure.
71
The reactor also has an agitator, dedicated ports for adding seed stock and media ingredients,
72
separate ports for acid and base supplement, air filters for supply and exhaust,
73
and valves for drawing samples and for harvesting.
74
Most fermentation and monitoring functions can be managed from the bioreactor's dedicated process controller.
75
Before the fermentation process can begin, the area must be prepared.
76
Preparation includes removing equipment and material that won't be used in the process, cleaning and sanitizing the area and equipment,
77
and sterilizing equipment as required by the SOPs, Standard Operating Procedures.
78
Sterilization is used to eliminate unwanted microorganisms, which can grow naturally in the fermentation media and process equipment.
79
Also, all required materials and documentation should be gathered and prepared.
80
And all process control software should be loaded and verified.
81
The fermentation batch process will be guided and documented with the BPR, Batch Process Record.
82
The batch record leads the operator through the process, step by step, with each step requiring a sign -off and separate verification.
83
This record also includes spaces for documenting key times, activities, and instrument readings.
84
The GFP fermentation process really begins with the expansion of our bacteria seed stock.
85
After removing the specially modified E coli from the freezer and thawing it,
86
it's used to inoculate a small amount of fresh media in a shaker flask.
87
After the number of cells has reached the target amount, the thriving cells are ready for fermentation.
88
Meanwhile, in the fermentation area, operators begin with a complete check of all critical equipment.
89
Valves, caps, and lines are checked.
90
Hoses are tightened.
91
Probes are verified and calibrated.
92
and 10 kilograms of HPW is added to the vessel.
93
The bioreactor is brought up to normal process pressure and held there in order to check for leaks.
94
The pressure is monitored over a 30 -minute period.
95
If a leak is detected, the problem is corrected and the test is run again.
96
Once the reactor passes the test, we are ready to mix the media in the vessel.
97
The agitator is turned on, and the ingredients are added.
98
Yeast extract, triptych soy broth,
99
ammonium chloride, sodium biphosphate, monopotassium phosphate,
100
and an anti -foam compound.
101
Once all the initial ingredients are in, another 10 kilograms of high -purity water is added.
102
All ports and valves are closed.
103
All condensate valves are opened.
104
And the bioreactor begins an SIP, sterilize -in -place cycle.
105
The target for sterilization is 121 degrees Celsius for 30 minutes.
106
As soon as the temperature climbs to the targeted temperature, the condensate valves are closed, and the SIP cycle completes automatically.
107
Both the vessel and the media are now sterile, and we're ready to add the final ingredients to our media.
108
The glucose hose is attached to the vessel, the connection is steamed to sterilize it,
109
and the separately sterilized glucose antibiotic solution is pumped into the vessel.
110
Then a manual pH reading of the media is taken and the bioreactor is set up for its fermentation cycle.
111
After the inoculation hose is connected to the reactor and steamed for 20 minutes,
112
the expanded seed stock is pumped into the reactor containing the media.
113
Fermentation now begins.
114
The operator takes zero -hour readings and begins to regularly monitor batch temperature,
115
agitator RPMs, dissolved oxygen levels, pH, vessel pressure, optical density,
116
airflow rate, and glucose concentrations.
117
Optical densities and glucose concentrations are of particular interest, so they're graphed as well as documented.
118
When the targeted levels of glucose and optical density are achieved, it's time to add IPTG to the vessel to activate
119
or turn on the expression of the green fluorescent protein in the cells.
120
After allowing enough time for the cells to produce green fluorescent protein usually five hours more final readings are taken
121
and a sample is drawn to check the percentage of cell
122
solids the product is now referred to as broth the broth
123
which contains spent media and cells is complete
124
when the key nutrient glucose is mostly consumed and the batch has reached the desired concentration.
125
The batch is then cooled down, pumped into a broth tank, and labeled with the batch number, volume, time, and date.
126
The fermentation process is now complete.
127
The harvested broth will now move downstream to the recovery process, where the cells will be ruptured to free the green fluorescent protein,
128
and the protein will be separated from the other broth components.
앱 다운로드
유창하게 말하는 데 필요한 모든 것
AI 발음 평가문장마다 점수 확인
IPA 발음 연습모든 소리 마스터
단어 학습나만의 단어장 만들기
단어 게임놀면서 외우기
FOR YOU
추천 영상
C1170 문장
Glycolysis
Daily ConversationUniversity Students
C11
79 문장
Anaerobic Fermentation of Coffee 🧬☕
Daily ConversationUniversity StudentsWorking Adults
C15
50 문장
Types Of Manufacturing Processes (Job Shop, Batch, Mass, Flow, Process Type Manufacturing Processes)
Daily ConversationUniversity Students
C1125 문장
Formulation and Chemistry behind an Eyebrow Gel product #cosmeticFormulation
Daily ConversationUniversity StudentsWorking Adults
C111
25 문장
How Wool Is Made: From Farm to Fashion
Daily ConversationUniversity Students
C11
746 문장
Blindboy discovers the link between gut health and mental health
Daily ConversationUniversity StudentsWorking Adults
C11
56 문장
MinuteCement - LC3
Daily ConversationUniversity StudentsWorking Adults
C11
32 문장
Structure and Function of a Prokaryotic Cell (Bacteria)
Daily ConversationUniversity Students
C11
14 문장
How Distillation Columns Separate Chemicals
Daily ConversationUniversity Students
C11
239 문장
4 How to use PCR and qPCR
Daily ConversationUniversity Students
C12
68 문장
Controlled Multi-modal Image Generation for Plant Growth Modeling
Daily ConversationUniversity Students
C11
40 문장
The Engineering that Runs the Digital World 🛠️⚙️💻 How do CPUs Work?
Daily ConversationUniversity StudentsWorking Adults
이 레슨의 어휘와 말하기 포인트
이 말하기 레슨은 영상 “Bioprocessing Part 1: Fermentation”을(를) 바탕으로 합니다. 가장 자주 반복되는 단어는 다음과 같습니다: cell, fermentation, process, product, vessel. 이 영상에는 섀도잉할 문장 128개와 단어 1692개가 있습니다. 말하는 구간의 길이는 14:32입니다. 화자는 분당 약 116단어의 일정한 속도로 말해서 섀도잉하기에 편한 속도입니다. 영어에서 가장 많이 쓰이는 3,000단어에 속하는 단어가 72%뿐이라 어휘가 어려운 편입니다.
이 영상의 핵심 어휘
영상에 나오는 익혀 둘 만한 단어 15개를 발음, 뜻과 함께 정리했습니다.
| 단어 | 발음 | 뜻 |
|---|---|---|
| vessel 명사 | /ˈvɛsəl/ | 배, 선박 |
| glucose 명사 | /ˈɡluː.kəʊz/ | 포도당, 글루코스 |
| nutrient 명사 | /ˈnuː.tɹi.ənt/ | 영양소 |
| oxygen 명사 | /ˈɑksɪd͡ʒən/ | 산소 |
| monitor 명사 | /ˈmɑ.nɪ.tɚ/ | 모니터 |
| valve 명사 | /ˈvælv/ | 밸브 |
| ingredient 명사 | /ɪnˈɡɹiːdi.ənt/ | 성분 |
| density 명사 | /ˈdɛn.sə.ti/ | 밀도 |
| concentration 명사 | /ˌkɑn.sənˈtɹeɪ.ʃən/ | 집중, 집중력 |
| harvest 명사 | /ˈhɑɹ.vəst/ | 수확 |
| reactor 명사 | /ɹiˈæktɚ/ | 원자로 |
| acid 명사 | /ˈæsɪd/ | 산 |
| operator 명사 | /ˈɑpəˌɹeɪtɚ/ | 조작자, 오퍼레이터 |
| pump 명사 | /pʌmp/ | 펌프 |
| divide 동사 | /dɪˈvaɪd/ | 나누다, 가르다 |
영상에 나오는 구동사
| 단어 | 발음 | 뜻 |
|---|---|---|
| cool down 동사 | /kuːl ˈdaʊn/ | 식다, 식히다 |
| take off 동사 | 벗다 |
이 영상의 문법
화자가 가장 많이 쓰는 문형을 영상 속 실제 표현과 함께 정리했습니다.
| 문형 | 영상 속 표현 |
|---|---|
| 수동태 be + 과거분사 — 누가 하는지보다 무슨 일이 일어나는지에 초점 | can be thought · are infected · have been genetically altered |
| 현재완료 have/has + 과거분사 — 과거의 일이 지금도 관련이 있을 때 | have been · has grown · has been |
| 관계절 who / which + 절 — 사람이나 사물에 대한 추가 정보 | IPTG, which is · microorganisms, which can |
주의할 발음
화자는 we'll, doesn't, they're 같은 축약형과 약화된 형태를 6번 사용합니다. 들리는 대로 짧게 발음하세요.
- “th” 소리: gather /ˈɡæðɚ/, thrive /θɹajv/, broth /bɹɔθ/
- “sh”와 “zh” 소리: concentration /ˌkɑn.sənˈtɹeɪ.ʃən/, stationary /ˈsteɪʃəˌnɛɹi/, efficient /ɪˈfɪʃənt/, preparation /ˌpɹɛpəˈɹeɪʃ(ə)n/, nutrition /njuːˈtɹɪʃ.ən/
- 긴 단어 — 강세 위치에 주의: ingredient /ɪnˈɡɹiːdi.ənt/, concentration /ˌkɑn.sənˈtɹeɪ.ʃən/, operator /ˈɑpəˌɹeɪtɚ/, antibiotic /ˌæn.taɪ.baɪˈɑ.tɪk/, naturally /ˈnæt͡ʃ.(ə.)ɹə.li/
한국어 화자가 어려워하는 소리:
- /f/ — ㅍ(/p/)으로 바꾸지 말고 윗니를 아랫입술에 대기: verify /ˈvɛɹɪfaɪ/, efficient /ɪˈfɪʃənt/, filter /ˈfɪltɚ/, interfere /ˌɪn.tɚˈfɪɚ/, modify /ˈmɑ.dɪˌfaɪ/
- /v/ — ㅂ(/b/)과 구별하기: vessel /ˈvɛsəl/, valve /ˈvælv/, harvest /ˈhɑɹ.vəst/, divide /dɪˈvaɪd/, beverage /ˈbɛv(ə)ɹɪd͡ʒ/
- /z/ — ㅈ이 아니라 성대를 울리는 /s/: glucose /ˈɡluː.kəʊz/, hose /hoʊz/, reasonably /ˈɹiː.zən.ə.bli/, enzyme /ˈɛn.zaɪm/, exhaust /ɪɡˈzɔst/
이 영상으로 연습하는 방법
- 먼저 말하지 않고 영상을 끝까지 듣고 모르는 단어를 적어 둡니다.
- 보통 속도로 한 문장씩 섀도잉하고, 화자의 리듬과 맞을 때까지 반복합니다.
- 자신의 목소리를 녹음해 원본과 비교하고, vessel, glucose, nutrient 같은 단어에 특히 주의합니다.
쉐도잉이란? 영어 실력을 빠르게 키우는 과학적 방법
쉐도잉(Shadowing)은 원래 전문 통역사 훈련을 위해 개발된 언어 학습 기법으로, 다언어 학자인 Dr. Alexander Arguelles에 의해 대중화된 방법입니다. 핵심 원리는 간단하지만 매우 강력합니다: 원어민의 영어를 들으면서 1~2초의 짧은 지연으로 즉시 소리 내어 따라 말하는 것——마치 '그림자(shadow)'처럼 화자를 따라가는 것입니다. 문법 공부나 수동적인 청취와 달리, 쉐도잉은 뇌와 입 근육이 동시에 실시간으로 영어를 처리하고 재현하도록 훈련합니다. 연구에 따르면 이 방법은 발음 정확도, 억양, 리듬, 연음, 청취력, 말하기 유창성을 크게 향상시킵니다. IELTS 스피킹 준비와 자연스러운 영어 소통을 원하는 분들에게 특히 효과적입니다.