تدريب Shadowing: Bioprocessing Part 1: Fermentation - تعلم التحدث بالإنجليزية عبر الفيديو
اختر وضع التدريب
كل وضع يفتح غرفة تدريب بملء الشاشة.
128 جمل
إذا كانت الجمل قصيرة أو طويلة جدًا، انقر على Edit لتعديلها.
1
we all know something about fermentation it's a process used countless times each day to make a variety of dairy products,
2
baked goods, and beverages.
3
We sometimes think of it as letting foods go bad, but in a controlled way.
4
With a little help, milk becomes yogurt, bread rises, and grains decompose,
5
creating alcoholic beverages and alternative fuels.
6
But looking at these examples only gives us a clue as to what's really happening,
7
and how we can use the power of fermentation to cost -effectively create a broad array of biological products. So, what is fermentation?
8
A cell can be thought of as a microfactory.
9
These cells can be bacteria, fungi, or specific cells from mammals, plants, or insects.
10
In biotechnology, these cells are used to manufacture a product in a process called fermentation.
11
For yogurt, buttermilk, and cheese, we use bacteria.
12
To make breads and alcoholic beverages, we use yeast, a fungus.
13
And the production of some vaccines require the growth of mammalian cells that are infected with a specific virus.
14
The product the cells manufacture is usually a chemical the cells contain naturally,
15
or a substance that the cells have been genetically altered to create, or even a metabolic waste product of the organism's growth,
16
like one of our examples, alcohol.
17
There are too many everyday products created by commercial scale fermentation to even list, but some common ones include amino acids,
18
biopharmaceuticals, dyes, enzymes, food products, lipids, steroids, and vitamins.
19
Fermentation is a reasonably simple process.
20
A cell is selected based on its ability to produce the desired product.
21
A seed stock of cells is put into a small amount of media.
22
Media provides the nutritional products the cell needs to grow.
23
When the population of cells has grown and consumed most of the nutrients, it's moved into a larger vessel with more growth media,
24
and the process repeats.
25
This scaling up is complete when the quantity of cells is large
26
and healthy enough to transfer into a production vessel often referred to as a bioreactor
27
or fermenter with plenty of fresh media now available
28
and under tightly controlled conditions the cells grow and manufacture product
29
when the fermentation is complete the product is harvested fermentation is known as an upstream biotechnology process
30
it occurs early in the production flow before recovery, purification, formulation, filling, and packaging.
31
To better understand the fermentation process, we should first find out a little bit about the cells we use
32
and what they may require to reproduce and stay healthy.
33
Different cells have different needs.
34
Some are aerobic, they need oxygen, while others are anaerobic and do not require oxygen.
35
All cells require nutrition.
36
A properly formulated media contains the necessary nutrients to allow cells to grow and produce.
37
The fermenter mixes the cells evenly throughout the media to suspend the cells and supply the oxygen necessary for growth.
38
Effective and efficient fermentation requires rigorous monitoring and control of the environment within the bioreactor.
39
Key factors include temperature, pressure, pH, which is a measure of how acidic or alkaline the media is,
40
oxygen, usually measured as dissolved oxygen within the media, and nutrient levels.
41
Although the environment and the media are tailored to the needs of specific cells, the life cycle of almost all batches follows a predictable pattern.
42
The growth pattern has four phases, lag, exponential or log.
43
stationary, and death.
44
When a cell is first introduced to fresh media, it has to adapt to its new environment.
45
This creates a lull or lag in the growth timeline.
46
After the organism adapts, the batch takes off.
47
The cells begin dividing at a constant rate, an exponential or logarithmic or log increase,
48
doubling, then doubling again, and on and on.
49
As the nutrients in the media are consumed, toxic metabolic waste products build up, cells begin to die, and growth slows.
50
When it reaches the point that just as many cells are dying as are dividing, the batch enters the stationary phase.
51
This is the point at which the key nutrients are completely consumed, the fermentation is stopped, and the fermented broth is harvested.
52
If the fermentation were allowed to continue, the cells would enter the death phase.
53
More cells die than divide.
54
And, similar to the exponential phase, the death rate increases logarithmically.
55
Now that we have a basic understanding of how fermentation works, let's look at an actual process and see how it all comes together.
56
For our sample process, we will look at the production of Green Fluorescent Protein, or GFP.
57
GFP is broadly used as a biological marker.
58
It's a fluorescent dye that's very well tolerated by most cells and doesn't interfere with normal cellular function.
59
In the GFP fermentation process, we'll need to add an antibiotic to protect the purity of the batch, and then, late in the process,
60
a biochemical inducer to turn on the GFP gene.
61
Our materials for this process will include a bacteria seed stock, in this case E coli,
62
that has been genetically enhanced to produce GFP.
63
The basic ingredients for a compatible media which include nutrients, stabilizers, an antibiotic, and an anti -foaming agent,
64
and IPTG, which is the biochemical inducer that switches on the GFP gene.
65
The equipment that we'll be using includes a 300 -liter bioreactor, a UV -Vis spectrophotometer to monitor the optical density,
66
which is a measure of the concentration of cells in the bioreactor, a glucose analyzer to measure glucose,
67
a key nutrient, an offline pH meter to help track the acid -base balance and adjust online measurements if needed,
68
and a broth tank for our final product.
69
The bioreactor is equipped with a water jacket around the vessel to regulate temperature and integrated sensors to monitor key environmental factors,
70
including dissolved oxygen, pH, internal temperature, water jacket temperature, and vessel pressure.
71
The reactor also has an agitator, dedicated ports for adding seed stock and media ingredients,
72
separate ports for acid and base supplement, air filters for supply and exhaust,
73
and valves for drawing samples and for harvesting.
74
Most fermentation and monitoring functions can be managed from the bioreactor's dedicated process controller.
75
Before the fermentation process can begin, the area must be prepared.
76
Preparation includes removing equipment and material that won't be used in the process, cleaning and sanitizing the area and equipment,
77
and sterilizing equipment as required by the SOPs, Standard Operating Procedures.
78
Sterilization is used to eliminate unwanted microorganisms, which can grow naturally in the fermentation media and process equipment.
79
Also, all required materials and documentation should be gathered and prepared.
80
And all process control software should be loaded and verified.
81
The fermentation batch process will be guided and documented with the BPR, Batch Process Record.
82
The batch record leads the operator through the process, step by step, with each step requiring a sign -off and separate verification.
83
This record also includes spaces for documenting key times, activities, and instrument readings.
84
The GFP fermentation process really begins with the expansion of our bacteria seed stock.
85
After removing the specially modified E coli from the freezer and thawing it,
86
it's used to inoculate a small amount of fresh media in a shaker flask.
87
After the number of cells has reached the target amount, the thriving cells are ready for fermentation.
88
Meanwhile, in the fermentation area, operators begin with a complete check of all critical equipment.
89
Valves, caps, and lines are checked.
90
Hoses are tightened.
91
Probes are verified and calibrated.
92
and 10 kilograms of HPW is added to the vessel.
93
The bioreactor is brought up to normal process pressure and held there in order to check for leaks.
94
The pressure is monitored over a 30 -minute period.
95
If a leak is detected, the problem is corrected and the test is run again.
96
Once the reactor passes the test, we are ready to mix the media in the vessel.
97
The agitator is turned on, and the ingredients are added.
98
Yeast extract, triptych soy broth,
99
ammonium chloride, sodium biphosphate, monopotassium phosphate,
100
and an anti -foam compound.
101
Once all the initial ingredients are in, another 10 kilograms of high -purity water is added.
102
All ports and valves are closed.
103
All condensate valves are opened.
104
And the bioreactor begins an SIP, sterilize -in -place cycle.
105
The target for sterilization is 121 degrees Celsius for 30 minutes.
106
As soon as the temperature climbs to the targeted temperature, the condensate valves are closed, and the SIP cycle completes automatically.
107
Both the vessel and the media are now sterile, and we're ready to add the final ingredients to our media.
108
The glucose hose is attached to the vessel, the connection is steamed to sterilize it,
109
and the separately sterilized glucose antibiotic solution is pumped into the vessel.
110
Then a manual pH reading of the media is taken and the bioreactor is set up for its fermentation cycle.
111
After the inoculation hose is connected to the reactor and steamed for 20 minutes,
112
the expanded seed stock is pumped into the reactor containing the media.
113
Fermentation now begins.
114
The operator takes zero -hour readings and begins to regularly monitor batch temperature,
115
agitator RPMs, dissolved oxygen levels, pH, vessel pressure, optical density,
116
airflow rate, and glucose concentrations.
117
Optical densities and glucose concentrations are of particular interest, so they're graphed as well as documented.
118
When the targeted levels of glucose and optical density are achieved, it's time to add IPTG to the vessel to activate
119
or turn on the expression of the green fluorescent protein in the cells.
120
After allowing enough time for the cells to produce green fluorescent protein usually five hours more final readings are taken
121
and a sample is drawn to check the percentage of cell
122
solids the product is now referred to as broth the broth
123
which contains spent media and cells is complete
124
when the key nutrient glucose is mostly consumed and the batch has reached the desired concentration.
125
The batch is then cooled down, pumped into a broth tank, and labeled with the batch number, volume, time, and date.
126
The fermentation process is now complete.
127
The harvested broth will now move downstream to the recovery process, where the cells will be ruptured to free the green fluorescent protein,
128
and the protein will be separated from the other broth components.
تنزيل التطبيق
كل ما تحتاجه للتحدث بطلاقة
تقييم النطق بالذكاء الاصطناعيتقييم كل جملة
تدريب IPAأتقن كل صوت
المفرداتابنِ رصيدك من الكلمات
لعبة المفرداتتعلّم أثناء اللعب
FOR YOU
فيديو موصى به
C1170 جمل
Glycolysis
Daily ConversationUniversity Students
C11
79 جمل
Anaerobic Fermentation of Coffee 🧬☕
Daily ConversationUniversity StudentsWorking Adults
C15
50 جمل
Types Of Manufacturing Processes (Job Shop, Batch, Mass, Flow, Process Type Manufacturing Processes)
Daily ConversationUniversity Students
C1125 جمل
Formulation and Chemistry behind an Eyebrow Gel product #cosmeticFormulation
Daily ConversationUniversity StudentsWorking Adults
C111
25 جمل
How Wool Is Made: From Farm to Fashion
Daily ConversationUniversity Students
C11
746 جمل
Blindboy discovers the link between gut health and mental health
Daily ConversationUniversity StudentsWorking Adults
C11
99 جمل
PCR (Polymerase Chain Reaction)
Daily ConversationUniversity Students
C11
56 جمل
MinuteCement - LC3
Daily ConversationUniversity StudentsWorking Adults
C11
14 جمل
How Distillation Columns Separate Chemicals
Daily ConversationUniversity Students
C12
68 جمل
Controlled Multi-modal Image Generation for Plant Growth Modeling
Daily ConversationUniversity Students
C11
60 جمل
Faces of Chemistry: Organic solar cells (BASF) - Video 2 (14+)
Daily ConversationUniversity Students
C11
48 جمل
Pharmaceutical Industry Overview | Pharma and Biotech: Distinctions | Understanding Pharmaceuticals
Daily ConversationUniversity StudentsWorking Adults
المفردات وملاحظات التحدث لهذا الدرس
هذا الدرس في المحادثة مبني على الفيديو “Bioprocessing Part 1: Fermentation”. أكثر الكلمات تكرارًا في الفيديو: cell, fermentation, process, product, vessel. يحتوي هذا الفيديو على 128 جملة و1692 كلمة للتدرب على الترديد. مدة الكلام 14:32. يتكلم المتحدث بسرعة ثابتة، نحو 116 كلمة في الدقيقة، وهي سرعة مريحة للترديد. 72% فقط من الكلمات ضمن أكثر 3,000 كلمة شيوعًا في الإنجليزية، فالمفردات صعبة نسبيًا.
أهم المفردات في هذا الفيديو
15 كلمة من الفيديو تستحق التعلّم، مع النطق والمعنى:
| الكلمة | النطق | المعنى |
|---|---|---|
| vessel اسم | /ˈvɛsəl/ | فُلْك |
| glucose اسم | /ˈɡluː.kəʊz/ | جلوكوز |
| oxygen اسم | /ˈɑksɪd͡ʒən/ | أُكْسِجِين |
| monitor اسم | /ˈmɑ.nɪ.tɚ/ | مُرَاقِب, مُرَاقِبَة |
| valve اسم | /ˈvælv/ | صِمَام |
| ingredient اسم | /ɪnˈɡɹiːdi.ənt/ | مُقَوِّم |
| density اسم | /ˈdɛn.sə.ti/ | كَثَافَة |
| concentration اسم | /ˌkɑn.sənˈtɹeɪ.ʃən/ | تَرْكِيز |
| harvest اسم | /ˈhɑɹ.vəst/ | حِصَاد |
| reactor اسم | /ɹiˈæktɚ/ | مُفَاعِل |
| acid اسم | /ˈæsɪd/ | حَامِض, حَمْض |
| pump اسم | /pʌmp/ | مِضَخَّة |
| divide فعل | /dɪˈvaɪd/ | قَسَّمَ |
| beverage اسم | /ˈbɛv(ə)ɹɪd͡ʒ/ | شَرَاب, مَشْرُوب |
| antibiotic اسم | /ˌæn.taɪ.baɪˈɑ.tɪk/ | مُضَادّ حَيَوِيّ |
الأفعال المركبة التي ستسمعها
| الكلمة | المعنى |
|---|---|
| take off فعل | خَلَعَ |
القواعد في هذا الفيديو
أكثر التراكيب التي يستخدمها المتحدث، مع العبارات نفسها من الفيديو:
| التركيب | في الفيديو |
|---|---|
| المبني للمجهول be + اسم المفعول — التركيز على ما يحدث لا على من يفعله | can be thought · are infected · have been genetically altered |
| المضارع التام have/has + اسم المفعول — حدث ماضٍ ما زال له أثر الآن | have been · has grown · has been |
| جمل الوصل who / which + جملة — معلومة إضافية عن شخص أو شيء | IPTG, which is · microorganisms, which can |
نطق يحتاج إلى انتباه
يستخدم المتحدث 6 من الصيغ المختصرة، مثل we'll, doesn't, they're. انطقها بصيغتها القصيرة كما تسمعها.
- أصوات “th”: gather /ˈɡæðɚ/, thrive /θɹajv/, broth /bɹɔθ/
- أصوات “sh” و“zh”: concentration /ˌkɑn.sənˈtɹeɪ.ʃən/, stationary /ˈsteɪʃəˌnɛɹi/, efficient /ɪˈfɪʃənt/, preparation /ˌpɹɛpəˈɹeɪʃ(ə)n/, nutrition /njuːˈtɹɪʃ.ən/
- الكلمات الطويلة — انتبه لموضع النبر: ingredient /ɪnˈɡɹiːdi.ənt/, concentration /ˌkɑn.sənˈtɹeɪ.ʃən/, operator /ˈɑpəˌɹeɪtɚ/, antibiotic /ˌæn.taɪ.baɪˈɑ.tɪk/, naturally /ˈnæt͡ʃ.(ə.)ɹə.li/
أصوات يجدها متحدثو العربية صعبة:
- /p/ — ليس /b/: انطقه مع نفخة هواء: optical /ˈɑptɪkəl/, operator /ˈɑpəˌɹeɪtɚ/, pump /pʌmp/, adapt /əˈdæpt/, purity /ˈpjʊɹɪti/
- /v/ — ليس /f/: مع اهتزاز الأوتار الصوتية: vessel /ˈvɛsəl/, valve /ˈvælv/, harvest /ˈhɑɹ.vəst/, divide /dɪˈvaɪd/, beverage /ˈbɛv(ə)ɹɪd͡ʒ/
- تتابع الصوامت — لا تضف حركة بينها: glucose /ˈɡluː.kəʊz/, nutrient /ˈnuː.tɹi.ənt/, valve /ˈvælv/, ingredient /ɪnˈɡɹiːdi.ənt/, concentration /ˌkɑn.sənˈtɹeɪ.ʃən/
كيف تتدرب بهذا الفيديو
- استمع إلى الفيديو كاملًا مرة واحدة دون أن تتكلم، ودوّن الكلمات التي لا تعرفها.
- ردّد جملة جملة بالسرعة العادية، وكرّر كل جملة حتى يتطابق إيقاعك مع المتحدث.
- سجّل صوتك وقارنه بالأصل، مع الانتباه إلى كلمات مثل vessel, glucose, oxygen.
ما هي تقنية التظليل الصوتي؟
التظليل الصوتي (Shadowing) تقنية تعلم لغة مدعومة علمياً، طُورت أصلاً لتدريب المترجمين الفوريين المحترفين. الطريقة بسيطة لكنها قوية: تستمع لصوت إنجليزي أصلي وتكرره فوراً بصوت عالٍ — كظل يتبع المتحدث بتأخير 1-2 ثانية. تُظهر الأبحاث تحسناً كبيراً في دقة النطق والتنغيم والإيقاع وربط الأصوات والاستماع والطلاقة.