Shadowing Practice: FREE CCNA Lab 001: Basic Router Security Configuration 1 - Learn English Speaking with Video
Kies een oefenmodus
Elke modus opent een volledig scherm oefenruimte.
108 zinnen
Als zinnen te kort of te lang zijn, klik op Bewerken om ze aan te passen.
1
Welcome to this free Cisco CCNA Packet Tracer Practice Lab.
2
You can download the lab file from the link in the description.
3
See if you can complete the lab yourself first, and then continue watching this video if you have any trouble,
4
or watch it afterwards to check your solution.
5
In this lab, we will be working with two routers, R1 and R2.
6
We will configure basic security on the routers by using the enable password, which is used to enter privileged exec mode,
7
also known as enable mode.
8
I will only work with one of the routers in this video for the sake of time,
9
but I highly recommend that you perform the configurations on both of the routers for practice.
10
Repetition is essential to become familiar with the command Handline Interface or CLI.
11
Step 1 is to connect the two routers by their Gigabit Ethernet 00 interfaces.
12
I will refer to these as the Gig00 interfaces.
13
Click on Connections in the bottom left and select the cable.
14
Connect it to the Gig00 interface on R1 and then R2.
15
There we have it!
16
Step 1 is complete.
17
Step 2 is to set the host names according to the network diagram, that is to R1 and R2.
18
Click on each router and then select CLI to access the command line interface from which we will configure each router.
19
The current hostname for each router is displayed here.
20
As you can see, each router is currently named Router.
21
To change the hostname of a router, we must enter
22
Global Configuration mode, however to get there we must first enter
23
Privileged Exec mode.
24
This is achieved by using the Enable command.
25
To demonstrate a shortcut, I will use the exit command to return to the previous exec mode.
26
Notice that you can enter privileged exec mode by simply typing en.
27
You can also type en and then use tab to autocomplete it to enable, but this isn't necessary, en alone is fine.
28
E, however, is too short, and we are told this is an ambiguous command.
29
This is because there are other potential commands that begin with E, which we can see by typing E and then a question mark.
30
As you can see, there are two potential commands, enable and exit.
31
So if you just enter E, the router doesn't know which command you mean.
32
However, enable is the only command beginning with en, so en is all the router needs to know which command you mean.
33
Now that we are in privileged exec mode, we can use the configure terminal command to get to global configuration mode.
34
If you want to use shortcuts again as we did with enable and en, the shortest version of the configure terminal command is conf t.
35
From here we can set the hostname of the router.
36
This is done with the hostname command.
37
I will enter hostname R1.
38
As you can see, the hostname has changed from router to R1.
39
Change the hostname on R2 as well, and then step 2 is complete.
40
Step 3 is to set the enable password on each router to Cisco.
41
The enable password is used to enter privileged exec mode, which as I mentioned before is also called enable mode.
42
Previously we had no password set, so we were able to enter privileged exec mode without any password.
43
Now we are going to protect privileged exec mode so that only administrators can access it.
44
The command is simple, and it is done in global configuration mode, which we are already in.
45
Type enable password cisco.
46
That's it.
47
Now let's test it out.
48
From here I will use the exit command twice.
49
Once to bring me back to privileged exec mode, and then once again to bring me back to exec mode.
50
Now I will use the enable command again.
51
However, this time I am asked for a password.
52
The characters do not appear as I type.
53
However, if I type the password Cisco correctly and press enter, I am brought to privileged exec mode.
54
Now let's see what happens if I fail to enter the correct password.
55
I enter the wrong password once, twice, and then three times before being rejected for having bad secrets.
56
Now I will try again with the correct password, and I'm in.
57
Step 3 is now complete.
58
Step 4 is simply to view the password in the running configuration.
59
The running configuration is the current configuration of the router, whether or not you have actually saved it.
60
If you turn off the router without saving the running configuration, you will lose any changes.
61
If you want to keep your changes, you will save them to what's called the startup configuration.
62
That will be for another lab.
63
To view the running configuration, use the show running config command from privileged exec mode, which we are already in.
64
You can abbreviate it to, for example, shrun.
65
Enter the command, and you can see the password right here, with the exact command we used before, enable password cisco.
66
Step 4 asks if the password is encrypted, meaning translated into an unreadable code,
67
to protect it from being discovered by people who should not know the password.
68
As you can see it is not encrypted, it is written in clear text right here,
69
Cisco, so the answer is no. Step 4 is now complete.
70
Step 5 is to enable password encryption on the router.
71
We can protect passwords by encrypting them to render them unreadable.
72
This is done from global configuration mode with the command service password hyphen encryption.
73
I will enter the command and now step 5 is complete.
74
Step 6 is to once again view the running config.
75
I will use the same command as before, and now let's check the password.
76
However, the command doesn't work.
77
That is because we are currently in global configuration mode, and showrunnconfig must be entered from privileged exec mode.
78
Now, I could type exit to drop back to privileged exec mode, and then enter the command.
79
But there is one more way.
80
If I type do in front of the command, I can enter it from global configuration mode.
81
Do show running config.
82
There we go.
83
Let's look at the password.
84
You can see here enable password followed by a 7 and then a string of other numbers.
85
The password has successfully been encrypted.
86
Although we didn't type this 7 when we entered the command, it refers to the type of encryption used.
87
There are other types as well, but that's not something to worry about now.
88
The string of numbers that follow are the password Cisco, encrypted to be unreadable, so that anyone looking over our shoulder can't read the password.
89
Keep in mind that the encryption used in the Service Password Encryption command isn't very secure and can be cracked,
90
but this at least renders the password safe from someone simply glancing over your shoulder.
91
Step 6 is complete.
92
Step 7 is to disable password encryption.
93
We enabled password encryption with the Service Password Encryption command.
94
Now we will simply type no, followed by the same command.
95
No Service Password Encryption.
96
That's it.
97
Step 7 is now complete.
98
Step 8 is once again to view the password in the running configuration.
99
This time I'll exit down to privileged exec mode and type show running config to view the running configuration.
100
As you can see, the password is still encrypted.
101
Why is that, even though we disabled password encryption?
102
Well, disabling password encryption will prevent future passwords from being encrypted.
103
However, it does not unencrypt passwords that are already encrypted.
104
So the answer to step 8 is yes, the password is encrypted.
105
Step 8 and the lab are both now complete.
106
If you want to support my channel, I accept Bitcoin donations via the address in the description.
107
I am also a Brave verified publisher and accept BAT donations in the Brave browser.
108
Thank you.
App downloaden
Alles wat je nodig hebt om vloeiend te spreken
AI UitspraakScoor elke zin
IPA OefeningBeheers elk geluid
WoordenschatBouw je woordenschat op
WoordenspelLeren terwijl je speelt
Zelfde Kanaal
FOR YOU
Aanbevolen Video
C11
76 zinnen
GC FID Operational Tutorial
Daily ConversationUniversity Students
C11
284 zinnen
How to Become Your Own ISP
Daily ConversationUniversity StudentsWorking Adults
C11
54 zinnen
Traceroute: You're Probably Reading the Results Wrong
Daily ConversationUniversity StudentsWorking Adults
B22
8 zinnen
Every Cybersecurity Beginner Should Watch This First (Networking Fundamentals)
Daily ConversationUniversity StudentsWorking Adults
C11
68 zinnen
GitHub Copilot now controls your command line...
Daily ConversationUniversity StudentsWorking Adults
C1101 zinnen
BGP Overview
Daily ConversationUniversity StudentsWorking Adults
C11
64 zinnen
What is SCADA?
Daily ConversationUniversity StudentsWorking Adults
C13
9 zinnen
Rate Limiter System Design in Under 60 Seconds #techprep #programming #systemdesign
Daily ConversationUniversity StudentsWorking Adults
C11
537 zinnen
Understand Microsoft Entra ID | AZ-104 | Episode 2
Daily ConversationUniversity StudentsWorking Adults
C11
176 zinnen
Every Networking Concept Explained | Networking 101 (2026)
Daily ConversationUniversity StudentsWorking Adults
C11
276 zinnen
Civil 3D course for beginners - Part 2 of 3
Daily ConversationUniversity Students
Woordenschat en spreektips bij deze les
Deze spreekles is gebaseerd op de video “FREE CCNA Lab 001: Basic Router Security Configuration 1”. Deze woorden komen het vaakst terug: password, command, mode, router, step. Deze video bevat 108 zinnen en 1307 woorden om na te spreken. Het gesproken deel duurt 9:58. De spreker praat in een gelijkmatig tempo van ongeveer 131 woorden per minuut, prettig om te shadowen. Slechts 78% van de woorden hoort bij de 3.000 meest gebruikte Engelse woorden, dus de woordenschat is pittig.
Belangrijke woorden in deze video
15 woorden uit de video die het leren waard zijn, met uitspraak en betekenis:
| Woord | Uitspraak | Betekenis |
|---|---|---|
| password zelfstandig naamwoord | /ˈpæs.wɜɹd/ | wachtwoord |
| enable werkwoord | /ɪˈneɪ.bəl/ | inschakelen, in staat stellen |
| privilege zelfstandig naamwoord | /ˈpɹɪv.(ɪ.)lɪd͡ʒ/ | voorrecht, privilege |
| exit zelfstandig naamwoord | /ˈɛɡzət/ | uitgang |
| interface zelfstandig naamwoord | /ˈɪn(t)ɚˌfeɪs/ | koppeling, aansluiting |
| disable werkwoord | /dɪsˈeɪbəl/ | onmogelijk maken |
| refer werkwoord | /ɹɪˈfɜː/ | verwijzen, doorverwijzen |
| select werkwoord | /sɪˈlɛkt/ | uitkiezen, selecteer |
| string zelfstandig naamwoord | /stɹɪŋ/ | draad, koord |
| connect werkwoord | /kəˈnɛkt/ | verbinden |
| donation zelfstandig naamwoord | /doʊˈneɪʃən/ | schenking |
| render werkwoord | /ˈɹɛn.dɚ/ | veroorzaken |
| successfully bijwoord | /səkˈsɛs.fə.li/ | met succes |
| afterwards bijwoord | /ˈæf.tɚ.wɚdz/ | nadien, achteraf |
| crack zelfstandig naamwoord | /kɹæk/ | barst, breuk |
Phrasal verbs die je zult horen
| Woord | Betekenis |
|---|---|
| turn off werkwoord | uitzetten, uitschakelen |
Grammatica in deze video
De structuren die de spreker het meest gebruikt, met de exacte woorden uit de video:
| Structuur | In de video |
|---|---|
| Lijdende vorm be + voltooid deelwoord — het gaat om wat er gebeurt, niet om wie het doet | is displayed · is achieved · are told |
| Present perfect have/has + voltooid deelwoord — iets uit het verleden dat nu nog telt | has changed · have actually saved |
| Betrekkelijke bijzinnen who / which + zin — extra informatie over een persoon of ding | password, which is · people who should |
Uitspraak om op te letten
De spreker gebruikt 8 samentrekkingen en verkorte vormen, zoals doesn't, isn't, can't. Spreek ze kort uit, zoals je ze hoort.
- De klanken “sh” en “zh”: configuration /kənˌfɪɡ.əˈɹeɪ̯.ʃən/, encryption /ɪnˈkɹɪpʃən/, donation /doʊˈneɪʃən/, publisher /ˈpʌblɪʃɚ/, shortcut /ˈʃɔːtkʌt/
- Lange woorden — let op de klemtoon: configuration /kənˌfɪɡ.əˈɹeɪ̯.ʃən/, successfully /səkˈsɛs.fə.li/, administrator /ədˈmɪn.ɪ.stɹeɪ.tɚ/, ambiguous /æmˈbɪɡ.ju.əs/, abbreviate /əˈbɹi.vi.eɪt/
Klanken die Nederlandstaligen lastig vinden:
- Stemhebbende eindmedeklinker — /b/, /d/, /g/, /z/, /v/ niet verscherpen: password /ˈpæs.wɜɹd/, privilege /ˈpɹɪv.(ɪ.)lɪd͡ʒ/, afterwards /ˈæf.tɚ.wɚdz/, config /ˌkənˈfɪɡ/
- /æ/ — opener dan de Nederlandse “e”: password /ˈpæs.wɜɹd/, afterwards /ˈæf.tɚ.wɚdz/, crack /kɹæk/, translate /tɹænzˈleɪt/, glance /ɡlæns/
- /g/ — een harde plofklank, geen Nederlandse “g”: configuration /kənˌfɪɡ.əˈɹeɪ̯.ʃən/, exit /ˈɛɡzət/, glance /ɡlæns/, diagram /ˈdaɪ.ə.ɡɹæm/, ambiguous /æmˈbɪɡ.ju.əs/
Zo oefen je met deze video
- Luister de hele video één keer zonder te spreken en noteer de woorden die je niet kent.
- Spreek zin voor zin na op normale snelheid en herhaal elke zin tot je ritme gelijk is aan dat van de spreker.
- Neem jezelf op en vergelijk met het origineel; let daarbij op woorden als password, enable, privilege.
Wat is de Shadowing-techniek?
Shadowing is een wetenschappelijk onderbouwde taalleermethode die oorspronkelijk is ontwikkeld voor professionele tolkentraining en gepopulariseerd door polyglot Dr. Alexander Arguelles. De methode is eenvoudig maar krachtig: je luistert naar native Engelse audio en herhaalt het onmiddellijk hardop — als een schaduw die de spreker volgt met slechts 1–2 seconden vertraging. In tegenstelling tot passief luisteren of grammaticadrills, dwingt shadowing je hersenen en mondspieren om echte spraakpatronen tegelijkertijd te verwerken en te reproduceren. Onderzoek toont aan dat het de uitspraaknauwkeurigheid, intonatie, ritme, verbonden spraak, luisterbegrip en spreekvaardigheid aanzienlijk verbetert — waardoor het een van de meest effectieve methoden is voor IELTS Speaking-voorbereiding en echte Engelse communicatie.