Pratica di Shadowing: FREE CCNA Lab 001: Basic Router Security Configuration 1 - Impara a parlare inglese con i video
Scegli una modalità di pratica
Ogni modalità apre una sala di pratica a schermo intero.
108 frasi
Se le frasi sono troppo corte o troppo lunghe, clicca su Edit per modificarle.
1
Welcome to this free Cisco CCNA Packet Tracer Practice Lab.
2
You can download the lab file from the link in the description.
3
See if you can complete the lab yourself first, and then continue watching this video if you have any trouble,
4
or watch it afterwards to check your solution.
5
In this lab, we will be working with two routers, R1 and R2.
6
We will configure basic security on the routers by using the enable password, which is used to enter privileged exec mode,
7
also known as enable mode.
8
I will only work with one of the routers in this video for the sake of time,
9
but I highly recommend that you perform the configurations on both of the routers for practice.
10
Repetition is essential to become familiar with the command Handline Interface or CLI.
11
Step 1 is to connect the two routers by their Gigabit Ethernet 00 interfaces.
12
I will refer to these as the Gig00 interfaces.
13
Click on Connections in the bottom left and select the cable.
14
Connect it to the Gig00 interface on R1 and then R2.
15
There we have it!
16
Step 1 is complete.
17
Step 2 is to set the host names according to the network diagram, that is to R1 and R2.
18
Click on each router and then select CLI to access the command line interface from which we will configure each router.
19
The current hostname for each router is displayed here.
20
As you can see, each router is currently named Router.
21
To change the hostname of a router, we must enter
22
Global Configuration mode, however to get there we must first enter
23
Privileged Exec mode.
24
This is achieved by using the Enable command.
25
To demonstrate a shortcut, I will use the exit command to return to the previous exec mode.
26
Notice that you can enter privileged exec mode by simply typing en.
27
You can also type en and then use tab to autocomplete it to enable, but this isn't necessary, en alone is fine.
28
E, however, is too short, and we are told this is an ambiguous command.
29
This is because there are other potential commands that begin with E, which we can see by typing E and then a question mark.
30
As you can see, there are two potential commands, enable and exit.
31
So if you just enter E, the router doesn't know which command you mean.
32
However, enable is the only command beginning with en, so en is all the router needs to know which command you mean.
33
Now that we are in privileged exec mode, we can use the configure terminal command to get to global configuration mode.
34
If you want to use shortcuts again as we did with enable and en, the shortest version of the configure terminal command is conf t.
35
From here we can set the hostname of the router.
36
This is done with the hostname command.
37
I will enter hostname R1.
38
As you can see, the hostname has changed from router to R1.
39
Change the hostname on R2 as well, and then step 2 is complete.
40
Step 3 is to set the enable password on each router to Cisco.
41
The enable password is used to enter privileged exec mode, which as I mentioned before is also called enable mode.
42
Previously we had no password set, so we were able to enter privileged exec mode without any password.
43
Now we are going to protect privileged exec mode so that only administrators can access it.
44
The command is simple, and it is done in global configuration mode, which we are already in.
45
Type enable password cisco.
46
That's it.
47
Now let's test it out.
48
From here I will use the exit command twice.
49
Once to bring me back to privileged exec mode, and then once again to bring me back to exec mode.
50
Now I will use the enable command again.
51
However, this time I am asked for a password.
52
The characters do not appear as I type.
53
However, if I type the password Cisco correctly and press enter, I am brought to privileged exec mode.
54
Now let's see what happens if I fail to enter the correct password.
55
I enter the wrong password once, twice, and then three times before being rejected for having bad secrets.
56
Now I will try again with the correct password, and I'm in.
57
Step 3 is now complete.
58
Step 4 is simply to view the password in the running configuration.
59
The running configuration is the current configuration of the router, whether or not you have actually saved it.
60
If you turn off the router without saving the running configuration, you will lose any changes.
61
If you want to keep your changes, you will save them to what's called the startup configuration.
62
That will be for another lab.
63
To view the running configuration, use the show running config command from privileged exec mode, which we are already in.
64
You can abbreviate it to, for example, shrun.
65
Enter the command, and you can see the password right here, with the exact command we used before, enable password cisco.
66
Step 4 asks if the password is encrypted, meaning translated into an unreadable code,
67
to protect it from being discovered by people who should not know the password.
68
As you can see it is not encrypted, it is written in clear text right here,
69
Cisco, so the answer is no. Step 4 is now complete.
70
Step 5 is to enable password encryption on the router.
71
We can protect passwords by encrypting them to render them unreadable.
72
This is done from global configuration mode with the command service password hyphen encryption.
73
I will enter the command and now step 5 is complete.
74
Step 6 is to once again view the running config.
75
I will use the same command as before, and now let's check the password.
76
However, the command doesn't work.
77
That is because we are currently in global configuration mode, and showrunnconfig must be entered from privileged exec mode.
78
Now, I could type exit to drop back to privileged exec mode, and then enter the command.
79
But there is one more way.
80
If I type do in front of the command, I can enter it from global configuration mode.
81
Do show running config.
82
There we go.
83
Let's look at the password.
84
You can see here enable password followed by a 7 and then a string of other numbers.
85
The password has successfully been encrypted.
86
Although we didn't type this 7 when we entered the command, it refers to the type of encryption used.
87
There are other types as well, but that's not something to worry about now.
88
The string of numbers that follow are the password Cisco, encrypted to be unreadable, so that anyone looking over our shoulder can't read the password.
89
Keep in mind that the encryption used in the Service Password Encryption command isn't very secure and can be cracked,
90
but this at least renders the password safe from someone simply glancing over your shoulder.
91
Step 6 is complete.
92
Step 7 is to disable password encryption.
93
We enabled password encryption with the Service Password Encryption command.
94
Now we will simply type no, followed by the same command.
95
No Service Password Encryption.
96
That's it.
97
Step 7 is now complete.
98
Step 8 is once again to view the password in the running configuration.
99
This time I'll exit down to privileged exec mode and type show running config to view the running configuration.
100
As you can see, the password is still encrypted.
101
Why is that, even though we disabled password encryption?
102
Well, disabling password encryption will prevent future passwords from being encrypted.
103
However, it does not unencrypt passwords that are already encrypted.
104
So the answer to step 8 is yes, the password is encrypted.
105
Step 8 and the lab are both now complete.
106
If you want to support my channel, I accept Bitcoin donations via the address in the description.
107
I am also a Brave verified publisher and accept BAT donations in the Brave browser.
108
Thank you.
Scarica l'app
Tutto ciò che serve per parlare fluentemente
Pronuncia con IAVoto per ogni frase
Pratica IPAPadroneggia ogni suono
VocabolarioCostruisci il tuo lessico
Gioco di vocabolarioImpara giocando
Stesso Canale
FOR YOU
Video consigliato
C11
76 frasi
GC FID Operational Tutorial
Daily ConversationUniversity Students
C11
284 frasi
How to Become Your Own ISP
Daily ConversationUniversity StudentsWorking Adults
C11
54 frasi
Traceroute: You're Probably Reading the Results Wrong
Daily ConversationUniversity StudentsWorking Adults
B22
8 frasi
Every Cybersecurity Beginner Should Watch This First (Networking Fundamentals)
Daily ConversationUniversity StudentsWorking Adults
C11
68 frasi
GitHub Copilot now controls your command line...
Daily ConversationUniversity StudentsWorking Adults
C1101 frasi
BGP Overview
Daily ConversationUniversity StudentsWorking Adults
C11
64 frasi
What is SCADA?
Daily ConversationUniversity StudentsWorking Adults
C13
9 frasi
Rate Limiter System Design in Under 60 Seconds #techprep #programming #systemdesign
Daily ConversationUniversity StudentsWorking Adults
C11
537 frasi
Understand Microsoft Entra ID | AZ-104 | Episode 2
Daily ConversationUniversity StudentsWorking Adults
C11
176 frasi
Every Networking Concept Explained | Networking 101 (2026)
Daily ConversationUniversity StudentsWorking Adults
C11
276 frasi
Civil 3D course for beginners - Part 2 of 3
Daily ConversationUniversity Students
Vocabolario e note di pronuncia per questa lezione
Questa lezione di conversazione si basa sul video “FREE CCNA Lab 001: Basic Router Security Configuration 1”. Le parole che ritornano più spesso: password, command, mode, router, step. Questo video contiene 108 frasi e 1307 parole da ripetere con lo shadowing. Il parlato dura 9:58. Chi parla mantiene un ritmo costante di circa 131 parole al minuto, comodo per lo shadowing. Solo il 78% delle parole rientra nelle 3.000 più comuni dell’inglese, quindi il lessico è impegnativo.
Vocaboli chiave di questo video
15 parole del video che vale la pena imparare, con pronuncia e significato:
| Parola | Pronuncia | Significato |
|---|---|---|
| password sostantivo | /ˈpæs.wɜɹd/ | parola d'ordine, parola chiave |
| enable verbo | /ɪˈneɪ.bəl/ | permettere |
| configuration sostantivo | /kənˌfɪɡ.əˈɹeɪ̯.ʃən/ | configurazione |
| privilege sostantivo | /ˈpɹɪv.(ɪ.)lɪd͡ʒ/ | privilegio, prerogativa |
| encryption sostantivo | /ɪnˈkɹɪpʃən/ | cifratura, codifica |
| exit sostantivo | /ˈɛɡzət/ | uscita |
| interface sostantivo | /ˈɪn(t)ɚˌfeɪs/ | interfaccia |
| disable verbo | /dɪsˈeɪbəl/ | disabilitare |
| refer verbo | /ɹɪˈfɜː/ | riferire |
| select verbo | /sɪˈlɛkt/ | scegliere, selezionare |
| string sostantivo | /stɹɪŋ/ | spago, stringa |
| connect verbo | /kəˈnɛkt/ | connettere, connettersi |
| terminal sostantivo | /ˈtɚmɪnəl/ | terminal, terminale |
| donation sostantivo | /doʊˈneɪʃən/ | donazione |
| render verbo | /ˈɹɛn.dɚ/ | rendere |
I phrasal verb che sentirai
| Parola | Significato |
|---|---|
| look over verbo | esaminare |
| turn off verbo | spegnere |
La grammatica di questo video
Le strutture che chi parla usa di più, con le parole esatte del video:
| Struttura | Nel video |
|---|---|
| Forma passiva be + participio passato — conta ciò che accade, non chi lo fa | is displayed · is achieved · are told |
| Present perfect have/has + participio passato — un’azione passata che conta ancora adesso | has changed · have actually saved |
| Frasi relative who / which + frase — un’informazione in più su una persona o una cosa | password, which is · people who should |
Pronuncia a cui fare attenzione
Chi parla usa 8 contrazioni e forme ridotte, come doesn't, isn't, can't. Pronunciale nella forma breve, così come le senti.
- I suoni “sh” e “zh”: configuration /kənˌfɪɡ.əˈɹeɪ̯.ʃən/, encryption /ɪnˈkɹɪpʃən/, donation /doʊˈneɪʃən/, publisher /ˈpʌblɪʃɚ/, shortcut /ˈʃɔːtkʌt/
- Parole lunghe — attenzione all’accento: configuration /kənˌfɪɡ.əˈɹeɪ̯.ʃən/, successfully /səkˈsɛs.fə.li/, administrator /ədˈmɪn.ɪ.stɹeɪ.tɚ/, ambiguous /æmˈbɪɡ.ju.əs/, abbreviate /əˈbɹi.vi.eɪt/
I suoni difficili per chi parla italiano:
- Consonante finale — senza aggiungere una vocale dopo: password /ˈpæs.wɜɹd/, privilege /ˈpɹɪv.(ɪ.)lɪd͡ʒ/, exit /ˈɛɡzət/, interface /ˈɪn(t)ɚˌfeɪs/, select /sɪˈlɛkt/
- /æ/ — più aperta della “e”: password /ˈpæs.wɜɹd/, afterwards /ˈæf.tɚ.wɚdz/, crack /kɹæk/, translate /tɹænzˈleɪt/, glance /ɡlæns/
Come esercitarsi con questo video
- Ascolta tutto il video una volta senza parlare e annota le parole che non conosci.
- Fai shadowing frase per frase a velocità normale, ripetendo ognuna finché il tuo ritmo coincide con quello di chi parla.
- Registrati e confronta con l’originale, facendo attenzione a parole come password, enable, configuration.
Cos'è la tecnica dello Shadowing?
Shadowing è una tecnica di apprendimento delle lingue supportata da studi scientifici, originariamente sviluppata per la formazione dei traduttori professionisti e resa popolare dal poliglotta Dr. Alexander Arguelles. Il metodo è semplice ma potente: ascolti un audio in inglese di madrelingua e lo ripeti immediatamente ad alta voce — come un'ombra che segue il parlante con un ritardo di solo 1–2 secondi. A differenza dell'ascolto passivo o degli esercizi di grammatica, lo shadowing costringe il tuo cervello e i muscoli della bocca a elaborare e riprodurre simultaneamente i modelli di discorso reale. La ricerca dimostra che migliora significativamente la precisione della pronuncia, l'intonazione, il ritmo, il discorso connesso, la comprensione dell'ascolto e la fluidità del parlato — rendendolo uno dei metodi più efficaci per la preparazione alla prova di speaking dell'IELTS e per la comunicazione reale in inglese.