ฝึกพูดภาษาอังกฤษด้วยเทคนิค Shadowing จากวิดีโอ: Making 20 Upgrades for my Desk Setup - Dream Setups #2

เลือกโหมดฝึก

แต่ละโหมดจะเปิดห้องฝึกแบบเต็มจอ

231 ประโยค
หากประโยคสั้นหรือยาวเกินไป กดที่ Edit เพื่อปรับแก้
1
This video is sponsored by Bamboo Lab.
2
So my desk setup might not look like much.
3
It's definitely more on the minimal side, but what you don't see are a bunch of carefully crafted features
4
that are designed to basically be invisible to people visiting my apartment.
5
There is hidden storage and functions everywhere.
6
It almost feels like magic at this point.
7
It all started a while ago when I spent a whole year designing the perfect draw organizers.
8
I created a whole system to make accessing the tools I use every single day as efficient as possible.
9
This really inspired me to maximize not just the organization of my tools, but how I use my whole desk setup all together.
10
This is part of my new dream setup series.
11
So if you have any ideas for what should be my next episode or what kind of upgrades I should do,
12
drop them in the comments below.
13
But for now, let's make this quick.
14
Let's start with charging cables.
15
I want them easily accessible, but never in the way.
16
The easiest way to accomplish this is to actually just buy one of these adhesive retractable charging cable thingies
17
and use its adhesive back to just stick it under your desk.
18
But I decided I wanted to use this other one instead.
19
It's a wall plug, which is a bit annoying, but it's way cheaper and it also comes with a USB outlet.
20
This will definitely be useful under my desk.
21
A lot of these upgrades are going to require custom designs.
22
So for this video, I'll be trying out the new P2S 3D printer from Bamboo Lab.
23
I then plugged in the short extension cable, and now it's ready.
24
This is especially handy here for tools that draw power over USB -C, like my soldering iron and
25
when I'm done I designed one for the back of my desk too
26
that orients the plug
27
so it's poking up instead to charge things on my desk like my keyboard
28
and when I'm done using it that's it
29
but I don't want to charge my phone here
30
that would get in the way so I'm actually gonna install this it's actually designed for laptops initially but still works
31
and the same is true for my airpods i don't want these just sitting around getting lost
32
and not staying charged now the new airpods they're actually magsafe compatible
33
and what i learned is that the magnets are strong enough to charge these even upside down.
34
So I think I know the perfect spot to hide these.
35
With this gummy double -sided tape, I can mount this print on the back of my studio display without worrying about residue marks
36
if I ever need to remove it.
37
The back of my monitor has this little crevice that perfectly fits my SD card and CFX Express type A card reader.
38
It's like it was made to be here.
39
I love how subtle it looks but now it just feels like I have this extra functionality built into my monitor stand.
40
So to show just how much I hate unnecessary things on my desk
41
and how far I'm willing to go to maximize my usable space I got this laptop stand a while back.
42
I really like it, but instead of using it with the metal base plate it came with, I actually just ended up drilling into my desk.
43
And even though this isn't a huge functional upgrade, I just love how clean it looks now,
44
and I never have to worry about stuff getting in the way of my laptop stand.
45
Ambient light is super important for any good desk setup to reduce eye strain, but to also make your space look cozy,
46
which is exactly what I want my desk set up to be.
47
So I wanted to design my own lamp.
48
With designing any kind of light,
49
it's all about controlling where the light goes and does not go and using that path of light to showcase form.
50
This can be kind of tricky with 3D printing because unless you're using very thick walls,
51
in most cases, the light's just going to shine through all of the plastic.
52
That's kind of why most 3D printed lamps end up having this similar look.
53
The light is just kind of shining through all of it i got nothing against
54
that but i realized with bamboo labs ams system i can 3d print with multiple colors at the same time.
55
The AMS 2
56
Pro also has active heating and venting, making it a perfect system for keeping all my filament in the best condition possible.
57
I can use this bone white filament.
58
For parts of the print, I want less light to shine through, paired with black filament to fully block light from passing through those areas.
59
I think this design may have been loosely inspired by a certain building I walk by every day.
60
I left the top open in case the light bulb gets warm, but with LEDs, heat isn't really a problem.
61
So instead, I'll be diffusing the light up here with a lid, which makes it the perfect spot for this little dude.
62
So when I catch myself working too hard, this little guy reminds me to slow down a bit.
63
I don't want to reach back here to turn the lamp on and off all the time from the switch.
64
So I'll be using a huge smart bulb, making this a smart lamp.
65
So I can control this lamp along with all the other lights in my apartment from a single switch.
66
This switch is actually very important.
67
You see the lights in my background.
68
I have multiple colors and brightness presets set for these guys
69
and along with all the lights in my apartment for different tasks that I'm doing.
70
If I'm filming, they had a pretty low brightness preset, so it doesn't overexpose the camera.
71
If I'm just hanging out or I have guests over, they're in this slightly brighter and warmer mode.
72
If I'm trying to be hyper -focused on my desk, I use this super bright configuration.
73
And there's this one too.
74
That's like, the point is, I use this controller a lot, but my problem is not only does it go missing very often,
75
it's once again, another item that's occupying space on my desk.
76
So while I was trying to figure out where to hide this button, I noticed the ambient light of my desk is now uneven.
77
I wanted another lamp on this side of my monitor
78
and I realized what if that lamp could also be the controller for all my lights.
79
The Hue smart switch can slide right into this track.
80
so now when i click down on the lampshade not only does it turn on the lamp
81
but it also controls all the lights in my living room
82
i can tap on it multiple times to toggle between different presets and even use gestures to adjust the specific brightness
83
okay i don't know if anyone can relate to this next one
84
but i have a really weird need
85
when it comes to using my ipad i always need to have two cases handy for it
86
when i need to use it for writing scripts i use the magic keyboard case
87
when i'm watching content drawing on my ipad
88
or doom scrolling i need the flexibility of this origami stand case so i made this
89
these shelves can now hold both of my ipad cases along with the ipad in either one of them
90
With the charging cable close by, it can also ensure my iPad stays charged.
91
Okay, let's talk about cable management.
92
Some people like to go full out with modular boards and fancy systems, and I totally get that, but for me, my needs are simple.
93
I just want something that looks clean and makes it easy to route and hide all my cables quickly.
94
And I've tried to track systems and shelves, but this is definitely the best solution I've tried so far.
95
it can fit my entire power strip inside and it's super easy to install
96
and it's basically shaped like a taco i can hook the front to open it up
97
and i can route all the cables inside what i love about is
98
that it's got these velcro straps for me to hold everything neatly
99
but it also gives me the flexibility to basically just shove everything inside very quickly
100
and easily if i'm in the rush
101
and either way once i close up the taco it always looks tidy from the outside
102
and that's good enough for me
103
this next design starts with me pausing the print right at the start I can embed some magnets into it
104
and then I let the rest of the print finish next is this bracket
105
and same thing I need to embed some magnets here
106
and then here as well these ones can fall easily though since it's not stuck to the print bed
107
so I'm using some more magnets to clamp them in place.
108
The bracket mounts under my desk with this guide and the bin attaches magnetically underneath.
109
The way this works is
110
that there is now a red line indicator on my desk for where the garbage can is
111
and so I can just push trash off this part of my desk.
112
If I have smaller debris or dust on my desk, this red part of the indicator actually snaps off,
113
revealing a brush that I can then use to sweep things up
114
so this brush is actually fully 3d printed i got inspired by one of those hairy lion thingies
115
that people love 3d printing and realized
116
that with a bit of bridging i can use
117
that same technique to make a perfectly functional brush so
118
when i have a bunch of eraser bits i can also take off the bin
119
and use it like a dustpan and
120
when i'm done they can both return to the bracket magnetically
121
so most of the projects for my youtube channel are made on my old 3d printer
122
Bamboo Labs X1C.
123
It's just super reliable despite its crazy print speeds.
124
I love its AI -powered camera monitoring system, multi -material printing.
125
It's always been my favorite 3D printer to use.
126
But now that there's the new P2S, what's wild is that even though it's a cheaper 3D printer than the X1C,
127
it somehow comes with all of those features I just talked about.
128
And even more, yeah, it has a new quick swap nozzle design and brighter dual lights inside the enclosure.
129
So before on the X1C, this is all you can see from the outside.
130
But now with the P2S, visibility has been drastically improved.
131
Look at that comparison.
132
With the better lighting, recording time lapses and videos just look so much better now.
133
Tons of amazing new features, but my favorite are these little handles on the sides.
134
Revolutionary stuff.
135
My most recommended budget beginner 3D printer is still the A1 Mini.
136
But if you're looking for something that can get you larger prints and has an enclosed system,
137
is quieter, faster, and can just take your projects even further, the P2S is all of that.
138
This machine is a beast.
139
And at this price point, it's a no brainer.
140
So check out the links below for more information about it.
141
And thank you to Bamboo Lab for sponsoring this video.
142
Now let's move on to my Alex drawers.
143
This is a classic piece of furniture from Ikea that's part of so many desk setups.
144
My desk's main drawer is very efficiently organized, but these, not so much.
145
I've always felt like I can get more out of the Alex drawers, but the annoying thing is the drawers don't even fully extend.
146
It's hard to use as maximum potential when I can't even reach the things in the back of it, so let's change that.
147
Let's go.
148
Okay, so this is Scott from the future, and this is the thing.
149
The design heavily relies on the metal track behind it to reinforce these walls and keep everything straight.
150
I know this because there's a scene later on where I pulled out the drawers very carelessly
151
while there's a lot of weight inside the drawer.
152
So of course, without the metal track supporting these walls, all the dovetails snapped.
153
Now, the funny thing is I didn't even notice this at first.
154
I reinstalled everything and everything still worked fine.
155
So although I think PLA definitely works for this project
156
i decided to reprint everything anyway with some carbon fiber reinforced
157
pet plastic just to be safe for long -term use the p2s's in clothes design makes
158
it way easier to print material like this which require more stable temperature
159
and better fume control and now this just feels
160
so much more rigid compared to the original poa prints anyway this is definitely a more technical upgrade
161
so if you want detailed video tutorials on this and how to assemble the lamps from earlier, download all the 3D printable files from this video,
162
consider joining my YouTube channel membership to access those, and even access some behind -the -scenes content.
163
I'll leave some more details about this in the description below, but yeah, all this work just for three more inches.
164
Three inches might not sound like much, but now I can reach places I couldn't before.
165
So did you know the Alex drawers were the exact width of six Goodfinity boxes?
166
Yeah, it's perfect lengthwise not so much but it's good enough
167
so I'll be using that to organize a few of my less frequently used tools.
168
This one's for my camera lenses,
169
extra MagSafe batteries, other equipment batteries,
170
my camera monitor, and some lens adapters.
171
For the rest of the space, I'll be using it to finally address a problem that's been bugging me for such a long time.
172
These annoying containers come with any hardware you buy and they're never the same size.
173
They're just awful to use.
174
Greatfinity bins are perfect for this.
175
I can use a different color filament to label each bin with their hardware size.
176
These bins are designed with a small ramp inside them which makes taking things out very easily.
177
Now that all the bolts are sorted I wanted to take advantage of the extra height in the drawer
178
so I made this.
179
Now I'll be using this for different type of nuts, washers, everything that goes on bolts basically, with an extra bin for miscellaneous stuff.
180
Okay, another popular IKEA piece that everyone loves using for organization is the Scatus pegboard.
181
I'm so jealous of all the cool DIY projects and organization setups people have used this for,
182
but my problem is my office is in my living room and a pegboard, No offense, but no matter how you dress it,
183
it's always gonna look like a workshop organizer.
184
And I really don't want that look in my living room.
185
Now, there's a corner of my room, I always end up hiding my messes.
186
It's this area just behind my Alex drawers.
187
I always pile my film equipment there because it's just kind of a blind spot.
188
So what if I was able to hide the pegboard right there?
189
now my alex stores has the scatus pegboard functions
190
i can use ikea's metal pegboard hooks for carrying heavy film equipment or design my own accessories
191
so since my cameras are very expensive i need these holders to never unhook by accident
192
so I'll be locking them in with this additional print.
193
Now they're not going anywhere.
194
This next unique holder is for holding my camera battery chargers.
195
And this other one is for holding my sliders battery charger.
196
I needed to make the hole slightly larger to route these cables through,
197
room, but now I can easily charge my batteries right by my desk whenever they die.
198
After the batteries are charged, I need a way to keep them somewhere where they're easily accessible.
199
Initially, I wanted to make something like this.
200
Two long springs run through this.
201
It's basically an auto -expensing magazine.
202
Once batteries are loaded in, it's ready to dispense.
203
as satisfying and fun as this is there are three glaring problems one
204
because the spring needs a lot of room to compress only
205
half of this whole vertical height can be used to store the batteries that's a lot of wasted space
206
and because the batteries are loaded in from the top where it's also where they're dispensed it means
207
that over time the batteries at the very bottom will never getting used.
208
That's not good.
209
And three, because the pegboard on the drawer faces away from my desk, grabbing them from the front actually doesn't make a lot of sense.
210
They should ideally dispense from the side where I can then easily reach them from here.
211
So I rotated the dispenser and took out the springs.
212
And now this is a much better solution.
213
Batteries are loaded in from the very top and dispense out the bottom.
214
The extra space underneath lets me add a second dispenser for my larger slider batteries.
215
Now I can grab these batteries right from the front.
216
Alright I've been living with these upgrades for a few months now
217
and I gotta say I love them all so much
218
and I have
219
so many more ideas now on how I want to continue evolving not just my desk setup
220
but my other drawers and furniture and really my whole apartment.
221
So I really hope you follow along with this new series.
222
It's wild how much a few thoughtful improvements can completely change the way your space feels.
223
The changes might look small, but when little tedious tasks like grabbing my camera, getting a new battery and cleaning up a mess,
224
when these tasks go from being annoying to something that's actually fun and satisfying to do, something changes.
225
The barriers between between thinking and doing, they start to fade and you just start wanting to create.
226
And when this place is where I sit down to work every single day, that makes all the difference.
227
A well -designed setup doesn't just make work easier, it makes it feel better.
228
And when work feels good, you show up more, you finish more, and you try more.
229
That's why this matters.
230
Thanks for watching.
231
We'll be right back.

ดาวน์โหลดแอป

ทุกอย่างที่ต้องใช้เพื่อพูดได้คล่อง

AI ให้คะแนนการออกเสียงให้คะแนนทุกประโยค
ฝึก IPAเชี่ยวชาญทุกเสียง
คำศัพท์สร้างคลังคำของคุณ
เกมคำศัพท์เล่นไปเรียนไป
FOR YOU

วิดีโอแนะนำ

คำศัพท์และข้อสังเกตด้านการพูดสำหรับบทเรียนนี้

บทเรียนฝึกพูดนี้ใช้วิดีโอ “Making 20 Upgrades for my Desk Setup - Dream Setups” เป็นสื่อ วิดีโอนี้มี 231 ประโยค และ 3108 คำ สำหรับฝึกพูดตาม ช่วงที่มีเสียงพูดยาว 20:35 ผู้พูดพูดด้วยความเร็วเป็นธรรมชาติ ประมาณ 151 คำต่อนาที ใกล้เคียงกับบทสนทนาในชีวิตประจำวัน มีเพียง 79% ของคำที่อยู่ใน 3,000 คำที่ใช้บ่อยที่สุดในภาษาอังกฤษ คำศัพท์จึงค่อนข้างยาก

คำศัพท์สำคัญในวิดีโอนี้

คำที่ควรเรียนรู้ 15 คำจากวิดีโอ พร้อมคำอ่านและความหมาย:

คำศัพท์คำอ่านความหมาย
desk คำนาม/dɛsk/โต๊ะ, โต๊ะทำงาน
drawer คำนาม/dɹɔɹ/เก๊ะ, ลิ้นชัก
lamp คำนาม/ˈlæ̝mp/โคมไฟ
monitor คำนาม/ˈmɑ.nɪ.tɚ/จอภาพ, หน้าจอ
printer คำนาม/ˈpɹɪntɚ/เครื่องพิมพ์
bamboo คำนาม/bæmˈbu/ไผ่, ไม้ไผ่
magnet คำนาม/ˈmæɡ.nɪt/แม่เหล็ก
brush คำนาม/bɹʌʃ/แปรง
shine คำกริยา/ʃaɪn/ส่อง, ฉาย
brightness คำนาม/ˈbɹaɪtnəs/ความสว่าง
hook คำนาม/hʊk/ตะขอ, เบ็ด
hardware คำนาม/ˈhɑɹdˌwɛɹ/ฮาร์ดแวร์
furniture คำนาม/ˈfɝ.nɪ.t͡ʃɚ/เฟอร์นิเจอร์, เครื่องเรือน
laptop คำนาม/ˈlæp.tɑp/คอมพิวเตอร์วางตัก, แล็ปท็อป
lens คำนาม/lɛnz/เลนส์, แว่น

กริยาวลีที่คุณจะได้ยิน

คำศัพท์ความหมาย
show up คำกริยาโผล่
take off คำกริยาถอด
try out คำกริยาลอง

ไวยากรณ์ในวิดีโอนี้

โครงสร้างที่ผู้พูดใช้บ่อยที่สุด พร้อมคำพูดจริงจากวิดีโอ:

โครงสร้างในวิดีโอ
Present perfect continuous have/has been + -ing — การกระทำที่เริ่มก่อนหน้านี้และยังดำเนินอยู่that's been bugging · I've been living
Passive voice be + กริยาช่อง 3 — เน้นสิ่งที่เกิดขึ้น ไม่ใช่ผู้กระทำis sponsored · are designed · was made
Present perfect have/has + กริยาช่อง 3 — เหตุการณ์ในอดีตที่ยังเกี่ยวข้องกับปัจจุบันI've tried · It's always been · has been
Relative clauses who / which + อนุประโยค — ข้อมูลเพิ่มเติมเกี่ยวกับคนหรือสิ่งของplug, which is · lid, which makes · them which makes

การออกเสียงที่ควรระวัง

ผู้พูดใช้รูปย่อและรูปลดเสียง 53 ครั้ง เช่น I'm, I'll, don't ให้พูดแบบสั้นตามที่ได้ยิน

  • เสียง “th”: underneath /ˌʌndɚˈniθ/, thick /θɪk/, width /ˈwɪtθ/, thoughtful /ˈθɔːtfəl/, thingy /ˈθɪŋi/
  • เสียง “sh” และ “zh”: brush /bɹʌʃ/, shine /ʃaɪn/, shelf /ʃɛlf/, rush /ɹʌʃ/, extension /ɪkˈstɛnʃən/
  • คำยาว — ลงเสียงหนักให้ถูกพยางค์: accessible /əkˈsɛs.ɪ.bəl/, flexibility /ˌflɛksɪˈbɪlɪti/, indicator /ˈɪn.dɪˌkeɪ.tə(ɹ)/, unnecessary /ʌnˈnɛs.əˌsɛɹ.i/, revolutionary /ˌɹɛvəˈluʃənɛɹi/

เสียงที่คนไทยมักออกเสียงยาก:

  • เสียงท้ายคำ — ออกเสียงให้ครบ ไม่เปลี่ยนเป็นตัวสะกดแบบไทย: brush /bɹʌʃ/, brightness /ˈbɹaɪtnəs/, functional /ˈfʌŋkt͡ʃənəl/, accessible /əkˈsɛs.ɪ.bəl/, lens /lɛnz/
  • /v/ — ไม่ใช่ /w/ ให้ฟันบนแตะริมฝีปากล่าง: reveal /ɹɪˈviːl/, revolutionary /ˌɹɛvəˈluʃənɛɹi/, vertical /ˈvɝ.tɪ.kəl/, invisible /ɪnˈvɪzəb(ə)l/, shave /ˈʃeɪ̯v/
  • /z/ — เสียงก้อง ไม่ใช่ /s/: lens /lɛnz/, maximize /ˈmæksəmaɪz/, invisible /ɪnˈvɪzəb(ə)l/, organize /ˈɔɹɡənaɪz/, visibility /ˌvɪz.əˈbɪl.ɪ.ti/

วิธีฝึกกับวิดีโอนี้

  1. ฟังวิดีโอให้จบหนึ่งรอบโดยยังไม่ต้องพูด แล้วจดคำที่ยังไม่รู้จัก
  2. เริ่มที่ความเร็ว 0.75× พูดตามทีละประโยค แล้วกลับไปใช้ความเร็วปกติเมื่อเริ่มคล่อง
  3. อัดเสียงตัวเองแล้วเทียบกับต้นฉบับ โดยสังเกตคำอย่าง desk, drawer, lamp เป็นพิเศษ

เทคนิค Shadowing คืออะไร?

Shadowing เป็นเทคนิคการเรียนรู้ภาษาที่ได้รับการรับรองทางวิทยาศาสตร์ พัฒนาขึ้นสำหรับการฝึกนักแปลมืออาชีพ วิธีการนี้เรียบง่ายแต่ทรงพลัง: คุณฟังเสียงภาษาอังกฤษจากเจ้าของภาษาและพูดตามทันที — เหมือนเงาที่ตามผู้พูดด้วยช่วงเวลาห่าง 1-2 วินาที การวิจัยแสดงว่าเทคนิคนี้ปรับปรุงความแม่นยำในการออกเสียง ทำนองเสียง จังหวะ การเชื่อมเสียง การฟังเข้าใจ และความคล่องแคล่วในการพูดได้อย่างมีนัยสำคัญ

เทคนิค shadowing: อ่านคู่มือฉบับเต็มทีละขั้นตอน →