Shadowing Practice: Fire Pump Monthly Churn Test - Learn English Speaking with Video

Bir pratik modu seçin

Her mod tam ekran bir pratik odası açar.

128 cümleler

Cümleler çok kısa veya çok uzun ise, ayarlamak için Düzenle'ye tıklayın.

So when you come in for your monthly pump runs, you're going to come in this is a normal situation.

The first thing you're going to want to do, call on your security company and put the system in test.

If you don't put it in test, you can set fire alarms off and other stuff where you get the fire department here.

So first thing you do is put it in test.

I don't know if your procedure is to bypass the horn strobes

when you do it or however your normal procedure is with that.

After the system is in test, the first thing you want to do is come in here and actually do a visual inspection on the system.

Make sure everything is in the open position.

Just because it's alarmed doesn't mean that something is not right.

First thing I always do is you come in, take a look at your main water supply unit of the building.

Both valves are open.

You can tell this.

These are OSM -Y, open stem and yoke.

With this stem sticking out means that the valve is in the open position.

As we turn this to close it, this stem actually goes inside the valve.

So it's ever flush with the valve, it's off.

If it's out, it's in the open position.

So our main water coming in, both valves are in the open position.

We follow this up and through, go through our pump suction valve.

Valve is open, open position.

We're going to come through, we're going to take a look at both our gauges.

Both of those should be reading roughly the same sitting pressure

right around 50 to 60 psi is where you guys are at.

They're different looking gauges just because of the pressure.

One we're going to negative suction if we had to, one of them goes to high pressure.

Both of those are looking the same.

We come through here.

This valve right here which we'll talk about in a couple of minutes.

This is a casing relief valve.

What this does is actually

when the pump is running it's going to discharge water into the drain to keep the pump cool.

If it doesn't work, you can boil the water out of the pump

and then you overheat the pump and there's issues with that.

That's one thing we'll check when the pump is running to make sure it's discharging.

When it's not running, we want to make sure it's not discharging.

Come through here, test headers, close position, check our pump discharge for the open position.

We also check the valves on all our systems

that are indicating veins in line when the pipe is open across this shut

and make sure those are in the open position.

Look up top, make sure our jockey pump piping is leak -tight

and make sure that our valves are both in the open position along with our bypass, both are in the open position.

Once we have everything ready to go, we're ready to do our pump test.

First thing that we're going to want to do is we're going to check the jockey pump.

Each one of these have a pressure switch inside of them.

We're going to make sure that it comes on and off when it should, when it goes.

It came on, shut off.

We're up to pressure.

That's why it's so quick.

If you were down to say 65 PSI right now, that pump would keep running until we got up to 170 PSI.

The next one we're going to check is going to be the main fire pump.

You don't want to open these really, really fast because it actually drains the system.

It drains out fairly fast.

So there's a design so we don't have to drain the entire system out to kick it on.

We're just draining that sensing line really fast where it kicks on so we don't hammer the system.

So now the next one we're going to do is test that one.

It's going to be hard to see with this gauge.

Pressure in here is going to start to drop.

If you do it slow enough, you can see it drop.

It does drop fast so once it gets below that 150 your fire pump will kick off.

The pump came on, everything was good.

The next thing you're going to look at is what the pump starts.

You need to lower your feet.

See this one's standing at sitting pressure around 55.

This one now jumped up to 180.

Since we're going through the pump, we're actually pumping the water pressure from this section here up to the system.

The other thing we're going to look for, case relief out quite a few pints here.

I want to make sure this one has water discharging out of it.

That's your case relief.

If it doesn't have water coming out of it, it should have popped down.

It's small.

That means it's not running right.

There's something going on in case really.

The other valve is going to be our drain line for the actual microphone pair.

It's a water pool.

It's hard to see inside here.

You can actually feel the water.

Right here it's actually spraying water out.

What it does, that water comes through it.

It drains out.

Sometimes it springs out like it does.

It's normal for this type of pump.

Again, if you're out, if you need to keep an eye on those gauges, You can see where you're at,

let the system run for 10 minutes.

Once you take your 10 minute mark, what you're going to do is you're going to pull over.

Hit your stop button.

Generally listen to that pump should stop running.

Once it's stopped, take a look at your gauge.

Make sure you're still above where you need to be.

Let it go and you're back to normal.

You guys have probably your churn test.

Drain test.

You only have to do a drain test quarterly if you guys do your quarterly inspections.

That's only one drain every quarter because you have a backflow.

So what you do on that one with the pump running, you're going to have everything going.

You're going to open up a main drain, which is going to dump water outside.

You open that all the way, you take your pressure.

You have static pressure.

That's where the system's at normally without nothing flowing.

Residual pressure is going to be what it would be with that main drain wide open.

100

You'll look at our car right here.

101

You see that static and residual.

102

I already did it this morning, and that's what that is.

103

And then you do your alarm tests on the four systems.

104

Is that drain test done while you're doing that turn test?

105

You can.

106

It only needs to be done quarterly.

107

While you're doing that, you can just open that drain up.

108

You can do your 10 minute turn test for your quarterly.

109

When you do your quarterly, you can get it running and make sure everything looks good.

110

You can go and do your water flow alarms, which would be at each inspector's test for the pore systems.

111

You can come back and do your main drain test, which will probably all take you more than 10 minutes.

112

Once that's done, that's part of your 10 minute run rather than sit here for 10 minutes

113

and then go do other stuff.

114

You can do it all at once if you want to do that because each one of those, when you do a quarterly,

115

that counts as your weekly and your monthly test all at once because you're doing more.

116

Just like my annual I'm doing today, we'll basically take care of a weekly, a monthly, and a quarterly all today.

117

So you wouldn't have to do anything for that.

118

It's just more stuff that we have to do.

119

Any other questions on anything at all?

120

Now when you do a drain test, do we do all four of them?

121

You only have to do one a quarter.

122

The only reason why we're doing one a quarter is...

123

So we should pick a different main for each quarter.

124

I do all four of them today on the annual because I have to do that for the annual.

125

When we do these, what we're basically doing is we're flowing enough water through the backflow to clean any kind of deposits

126

or debris that's on the backflow.

127

You just try and get it off the full seat and flush water through it to help clean it.

128

That's the code for the backflow that you have to do.

Uygulamayı İndir

Akıcı konuşmak için ihtiyacınız olan her şey

AI TelaffuzHer cümleyi puanla

IPA AlıştırmasıHer sesi ustalaştır

Kelime BilgisiKelime bankanızı oluşturun

Kelime OyunuOynarken öğrenin

QR Tara

Download on theApp Store Get it onGoogle Play

FOR YOU

Video Öner

33 cümleler

Bu dersin kelimeleri ve konuşma notları

Bu konuşma dersi “Fire Pump Monthly Churn Test” videosuna dayanıyor. En çok tekrarlanan kelimeler: pump, test, drain, valve, pressure. Bu videoda gölgeleme çalışması için 128 cümle ve 1454 kelime var. Konuşma bölümü 7:12 sürüyor. Konuşmacı hızlı konuşuyor, dakikada yaklaşık 202 kelime; bu yüzden birbirine bağlanan ve zayıflayan sesler duyacaksınız. Kelimelerin %89’i İngilizcede en sık kullanılan 3.000 kelime arasında, bu yüzden kelime dağarcığını takip etmek kolay.

Bu videodaki önemli kelimeler

Videodan öğrenmeye değer 15 kelime, telaffuzu ve anlamıyla:

Kelime	Telaffuz	Anlam
pump isim	/pʌmp/	pompa
drain isim	/dɹiːn/	gider, yağmur gideri
valve isim	/ˈvælv/	sibop, supap
quarterly sıfat		trimestırâl, çeyrekyıllık
procedure isim	/pɹəˈsiː.d͡ʒə/	işlem, prosedür
pipe isim	/ˈpaɪp/	düdük, kaval
inspection isim	/ɪnˈspɛkʃən/	teftiş
flush fiil	/ˈflʌʃ/	sifonu çekmek
jockey isim	/ˈd͡ʒɑki/	jokey
roughly zarf	/ˈɹʌf.li/	kabaca
indicate fiil	/ˈɪndɪˌkeɪt/	belirtmek, göstermek
spray isim	/spɹeɪ/	serpinti, çisenti
hammer isim	/ˈhæmɚ/	çekiç
horn isim	/hɔɹn/	boynuz
leak isim	/liːk/	sızıntı

Duyacağınız deyimsel fiiller

Kelime	Telaffuz	Anlam
look up fiil	/ˌlʊk ˈʌp/	yukarı bakmak
pull over fiil		çekmek, durmak

Tekrar etmeye değer cümleler

Videodan, günlük konuşmada yeniden kullanabileceğiniz kısa ve tam cümleler:

Once it's stopped, take a look at your gauge.
Let it go and you're back to normal.
You'll look at our car right here.
Is that drain test done while you're doing that turn test?
It's just more stuff that we have to do.

Bu videodaki dil bilgisi

Konuşmacının en çok kullandığı yapılar, videodaki sözcüklerin aynısıyla:

Yapı	Videoda
Edilgen yapı be + fiilin üçüncü hâli — kimin yaptığı değil, ne olduğu önemli	is put · be done
İlgi cümlecikleri who / which + cümle — bir kişi ya da şey hakkında ek bilgi	drain, which is · test, which will

Dikkat edilecek telaffuzlar

Konuşmacı we're, you're, don't gibi kısaltılmış biçimleri 46 kez kullanıyor. Bunları duyduğunuz gibi kısa söyleyin.

“sh” ve “zh” sesleri: inspection /ɪnˈspɛkʃən/, flush /ˈflʌʃ/, suction /ˈsʌkʃən/

Türkçe konuşanların zorlandığı sesler:

Kelime başındaki ünsüz kümesi — araya ünlü eklemeyin: drain /dɹiːn/, stem /stɛm/, procedure /pɹəˈsiː.d͡ʒə/, static /ˈstæt.ɪk/, flush /ˈflʌʃ/
/æ/ — “e”den daha açık: valve /ˈvælv/, static /ˈstæt.ɪk/, bypass /ˈbaɪpæs/, hammer /ˈhæmɚ/

Bu videoyla nasıl çalışılır

Videonun tamamını konuşmadan bir kez dinleyin ve bilmediğiniz kelimeleri not edin.
0,75× hızla başlayın, cümle cümle tekrar edin ve kolaylaşınca normal hıza dönün.
Kendinizi kaydedin ve orijinaliyle karşılaştırın; pump, drain, valve gibi kelimelere özellikle dikkat edin.

Gölgeleme Tekniği Nedir?

Gölgeleme, başlangıçta profesyonel tercüman eğitimi için geliştirilen ve çok dilli Dr. Alexander Arguelles tarafından popüler hale getirilen, bilim destekli bir dil öğrenme tekniğidir. Yöntem basit ama güçlüdür: ana dili İngilizce olan bir sesi dinler ve hemen yüksek sesle tekrar edersiniz — konuşmacıyı 1-2 saniye gecikmeyle takip eden bir gölge gibi. Pasif dinleme veya dilbilgisi alıştırmalarının aksine, gölgeleme beyninizi ve ağız kaslarınızı gerçek konuşma kalıplarını eşzamanlı olarak işlemeye ve yeniden üretmeye zorlar. Araştırmalar, telaffuz doğruluğu, tonlama, ritim, bağlı konuşma, dinleme anlama ve konuşma akıcılığını önemli ölçüde geliştirdiğini göstermektedir — bu da onu IELTS Konuşma hazırlığı ve gerçek dünya İngilizce iletişimi için en etkili yöntemlerden biri yapar.

Shadowing tekniği: adım adım eksiksiz rehberi okuyun →

Shadowing Practice: Fire Pump Monthly Churn Test - Learn English Speaking with Video

Bir pratik modu seçin

Uygulamayı İndir

Well Pump Current #electrical #motorcontrol

What's Under Your Feet in New York City?

"SHIP GOES HERE" for flight 14 - Starbase Summary

Basic Introduction To Oil & Gas Well Perforating

What is SCADA?

My HomeLab Monitoring Rules // feat. Checkmk

Working as a Fire Protection Engineer - First Six Months Experience

Behind the Scenes with EMS: Critical Care During a Stroke

Broken Bosch Drill. How to repair a Bosch GBH 2-26 SDS Drill.

PCB Inspection Methods & Common PCB Defects

How F1 Cars Collect Data in Real Time

Parallel Pump Operation