Shadowing Practice: Transient Thermal Analysis in ANSYS AIM - Learn English Speaking with Video
Ders oluşturuluyor...
1
Hello and welcome to this demonstration of ANSYS AIM.
2
Today we will be performing a transient thermal analysis of a frying pan that is heated on a stove with natural convection.
3
The heat flow into the pan will be 250 watts,
4
with a convection coefficient of 20 watts per meter squared degrees Celsius which will act as the natural convection of the pan.
5
We want to find out is the time it takes for the max temperature to reach 100 degrees Celsius
6
and approximately when steady state is reached.
7
With AIM pulled up, we will now begin our analysis.
8
We will do a transient thermal analysis and to do this, We will select the simulation process template, thermal.
9
AIM will now start creating the template To do so, we first will need to import existing geometry.
10
We'll uncheck the allow model editing because we won't need that.
11
And then since we're doing a transient analysis, we want to do a time -dependent calculation type.
12
Since there is only one part to our analysis, we will turn off detect contact automatically as well.
13
With all these options selected, we are now ready to create the simulation process.
14
AIM is now asking us to select the geometry.
15
We'll select the geometry up here, frying pan, and then select open.
16
Now that we have our geometry imported, we'll want to select our unit system.
17
I'll go up into the Project menu, go down to Units, and select the metric system.
18
Next, we will go to meshing.
19
I'll go ahead and click on "Mesh" in the simulation process data panel.
20
we can use predefined settings But let's go down into the global sizing.
21
I'm going to set it to curvature which will help with meshing for circular geometry.
22
For instance, these fillet radii on my frying pan.
23
I'll now go ahead and push the blue lightning bolt, which will update and start generating my mesh.
24
Now that the mesh is finished, you can see that Along those curvatures, the mesh is more refined.
25
This is to better capture that geometry.
26
Thank you.
27
Next, we will want to set up our boundary conditions or thermal conditions for our analysis.
28
we'll go down to the View panel and click on the Physics tab.
29
Thank you.
30
From here, We can go up into the Physics Data panel And set our Analysis settings.
31
We are performing a time -dependent analysis, which means a transient thermal analysis, For duration, I'll go ahead and type in about 30 minutes.
32
That should give us plenty of time to see when steady state will occur.
33
That's 1800 seconds.
34
Thank you.
35
Our physics region is our pan, which is already being defined, Now we will need to define our material assignments.
36
I'll click on material assignments.
37
And currently it's set to structural steel.
38
I actually want to set it to cast iron.
39
I can either type in cast iron or I can go find it in the list here.
40
I'll select cast iron.
41
and that will apply that material property to my frying pan.
42
If I want to see or check on the material properties, I can click on this drop down arrow next to the cast iron.
43
This is where I will verify my material properties.
44
I'll next want to go back to the Physics tab.
45
and continue down the list of items that I need.
46
Next, I'll be adding my thermal boundary conditions.
47
So I can click on this Add button.
48
and what we want first is heat flow.
49
So I'll select that.
50
The HEATFO data panel Pull up.
51
and it'll ask me to define a location.
52
I can go and click in the box, Then since the stove top will be underneath my pan, I can select the bottom there.
53
To confirm this selection, I'll hit the plus sign next to the location.
54
I'll next need to define the magnitude of the heat flow.
55
This will be 250 watts.
56
I also want to apply convection to my model.
57
so I can click "Next Step" Add.
58
I go to solid thermal conditions.
59
and then I'll select Convection.
60
Thank you.
61
So I want to basically apply my convection to everywhere else in the model except for where I applied the heat flow.
62
So to do this, I can right -click, and then use the Select All feature.
63
I don't want all the faces to be selected.
64
So I'll go ahead and deselect the face where the heat flow is applied.
65
To confirm the selection, again I'll go back up to the plus sign, and add the selected entities.
66
Thank you.
67
heat transfer coefficient that all apply is 20 watts per meter squared degrees Celsius.
68
and then the convection temperature which is basically your environment temperature, I'll just set at room temperature, which is 22 degrees Celsius.
69
I can then go back to my Physics tab, and everything else I'll leave as default.
70
I'm now ready.
71
to solve my analysis.
72
To solve, I can right -click on this Physics tab, and select update.
73
Now that the solution is done solving, I can go to my Results section.
74
I'll click on the results tab.
75
In the Results tab, You'll notice that there are already predefined results.
76
by clicking the drop -down arrow next to the results in the data panel, I'll see that there's a contour plot here.
77
This is the contour of a temperature plot.
78
I can go ahead and click on that.
79
and you'll notice that it says that it's out of date.
80
What I want to do next is just click the lightning bolt to evaluate these results.
81
I can now take a look at my contour plots.
82
You can see that the maximum temperature is slightly above 150 degrees Celsius.
83
One of the objects that we had in the analysis was to determine about what time
84
the temperature reached above 100 degrees Celsius.
85
we can click the right arrow besides the calculated maximum and choose to plot this.
86
I'll go over to the chart and expand it so that it has a full window view.
87
So now we can find at what point The temperature reached 100 degrees Celsius.
88
We'll go over to 100 degrees Celsius and follow that datum all the way to where it crosses our curve.
89
This is at about 300 seconds.
90
We can also determine when our analysis reaches steady state by looking at when our temperature plot flattens out.
91
This is at about 1500 seconds.
92
This concludes...
93
The ANSYS -AIM transient thermal analysis.
94
Thank you. and goodbye.
✨ Video Öner
C11
50 cümleler
0.0.1 How to become a CAE Engineer CAE | What are the ways to become a CAE Engineer as a fresher
Business EnglishUniversity StudentsWorking Adults
C11
53 cümleler
FAST Scan (Focused Assessment with Sonography in Trauma) - STEP by STEP
Business EnglishUniversity StudentsWorking Adults
C16
18 cümleler
Conduction in Action
University StudentsWorking Adults
C17
60 cümleler
What is SMT (Surface Mount Technology)? PCB Assembly (Part 2)
Business EnglishUniversity StudentsWorking Adults
C12
246 cümleler
Accident Case Study: Night Falls on Final
Business EnglishUniversity StudentsWorking Adults
C11
114 cümleler
BAS Bootcamp: Day 6 Setting up IO Internally
Business EnglishUniversity StudentsWorking Adults
C1288 cümleler
Using Selection & Scan Processing tools for reverse engineering | Geomagic Design X
Business EnglishUniversity StudentsWorking Adults
C11
506 cümleler
Analyzing Statements of Cash Flows 1 (2025 CFA® Level I Exam – FSA – Learning Module 4)
Cambridge Exam PrepBusiness EnglishUniversity Students
C11
254 cümleler
REVIT 2023 FOR MEP - SYSTEM PIPING
Business EnglishUniversity StudentsWorking Adults
B21
237 cümleler
Master Cooking In Under 20 Minutes
Business EnglishDaily ConversationUniversity Students
C13
279 cümleler
LET THERE BE... Voltage? | Maxwell's Equation #2 Explained for Beginners
Business EnglishUniversity StudentsWorking Adults
C11
4 cümleler
Ambr®️ 250 High Throughput Perfusion Product Tutorial - Learn with Sartorius
Business EnglishUniversity StudentsWorking Adults
Bu dersin kelimeleri ve konuşma notları
Bu C1 seviyesindeki konuşma dersi “Transient Thermal Analysis in ANSYS AIM” videosuna dayanıyor. En çok tekrarlanan kelimeler: click, analysis, select, temperature, Celsius. Bu videoda gölgeleme çalışması için 94 cümle ve 1078 kelime var. Konuşma bölümü 8:48 sürüyor. Konuşmacı dakikada yaklaşık 123 kelimelik dengeli bir hızla konuşuyor; gölgeleme için rahat bir tempo. Kelimelerin yalnızca %79’i İngilizcede en sık kullanılan 3.000 kelime arasında, bu yüzden kelime dağarcığı zorlayıcı.
Bu videodaki önemli kelimeler
Videodaki en ileri düzey 15 kelime, telaffuzu ve anlamıyla:
| Kelime | Telaffuz | Anlam |
|---|---|---|
| mesh isim | /mɛʃ/ | gözenek |
| geometry isim | /d͡ʒiˈɑ.mə.tɹi/ | geometri |
| transient sıfat | /ˈtɹæn.ʃənt/ | geçici |
| watt isim | /wɑt/ | watt |
| fry fiil | /fɹaɪ/ | kızartmak |
| simulation isim | /ˌsɪm.jəˈleɪ.ʃn̩/ | simülasyon |
| coefficient isim | /ˌkoʊ.ɪˈfɪʃənt/ | katsayı |
| curvature isim | /ˈkɜɹ.və.tʃəɹ/ | eğrilik |
| predefine fiil | önceden tanımlamak | |
| template isim | /ˈtɛm.plɪt/ | şablon, kalıp |
| stove isim | /stoʊv/ | soba |
| metre isim | /ˈmiːtəɹ/ | metre |
| bolt isim | /boʊlt/ | cıvata |
| flatten fiil | /ˈflæ.tən/ | yasmak |
| calculation isim | /ˌkælkjuˈleɪʃn̩/ | hesaplama |
Duyacağınız deyimsel fiiller
| Kelime | Anlam |
|---|---|
| find out fiil | anlamak, ortaya çıkarmak |
| turn off fiil | kapamak |
Tekrar etmeye değer cümleler
Videodan, günlük konuşmada yeniden kullanabileceğiniz kısa ve tam cümleler:
- Next, I'll be adding my thermal boundary conditions.
- I don't want all the faces to be selected.
- I'll click on the results tab.
Bu videodaki dil bilgisi
Konuşmacının en çok kullandığı yapılar, videodaki sözcüklerin aynısıyla:
| Yapı | Videoda |
|---|---|
| Edilgen yapı be + fiilin üçüncü hâli — kimin yaptığı değil, ne olduğu önemli | is heated · is reached · is finished |
| İlgi cümlecikleri who / which + cümle — bir kişi ya da şey hakkında ek bilgi | Celsius which will · curvature which will · bolt, which will |
Dikkat edilecek telaffuzlar
Konuşmacı I'll, we'll, I'm gibi kısaltılmış biçimleri 32 kez kullanıyor. Bunları duyduğunuz gibi kısa söyleyin.
- “th” sesleri: thermal /ˈθɜːməl/, underneath /ˌʌndɚˈniθ/
- “sh” ve “zh” sesleri: convection /kənˈvɛkʃən/, mesh /mɛʃ/, transient /ˈtɹæn.ʃənt/, simulation /ˌsɪm.jəˈleɪ.ʃn̩/, coefficient /ˌkoʊ.ɪˈfɪʃənt/
- Uzun kelimeler — vurguyu doğru yere koyun: geometry /d͡ʒiˈɑ.mə.tɹi/, coefficient /ˌkoʊ.ɪˈfɪʃənt/, demonstration /dɛmənˈstɹeɪʃən/
Türkçe konuşanların zorlandığı sesler:
- Kelime başındaki ünsüz kümesi — araya ünlü eklemeyin: transient /ˈtɹæn.ʃənt/, fry /fɹaɪ/, stove /stoʊv/, flatten /ˈflæ.tən/
- /æ/ — “e”den daha açık: transient /ˈtɹæn.ʃənt/, flatten /ˈflæ.tən/, calculation /ˌkælkjuˈleɪʃn̩/, calculate /ˈkælkjʊleɪt/, magnitude /ˈmæɡnɪtjuːd/
Bu videoyla nasıl çalışılır
- Videonun tamamını konuşmadan bir kez dinleyin ve bilmediğiniz kelimeleri not edin.
- Normal hızda cümle cümle tekrar edin; ritminiz konuşmacıyla aynı olana kadar her cümleyi yineleyin.
- Kendinizi kaydedin ve orijinaliyle karşılaştırın; mesh, geometry, transient gibi kelimelere özellikle dikkat edin.
Gölgeleme Tekniği Nedir?
Gölgeleme, başlangıçta profesyonel tercüman eğitimi için geliştirilen ve çok dilli Dr. Alexander Arguelles tarafından popüler hale getirilen, bilim destekli bir dil öğrenme tekniğidir. Yöntem basit ama güçlüdür: ana dili İngilizce olan bir sesi dinler ve hemen yüksek sesle tekrar edersiniz — konuşmacıyı 1-2 saniye gecikmeyle takip eden bir gölge gibi. Pasif dinleme veya dilbilgisi alıştırmalarının aksine, gölgeleme beyninizi ve ağız kaslarınızı gerçek konuşma kalıplarını eşzamanlı olarak işlemeye ve yeniden üretmeye zorlar. Araştırmalar, telaffuz doğruluğu, tonlama, ritim, bağlı konuşma, dinleme anlama ve konuşma akıcılığını önemli ölçüde geliştirdiğini göstermektedir — bu da onu IELTS Konuşma hazırlığı ve gerçek dünya İngilizce iletişimi için en etkili yöntemlerden biri yapar.