Shadowing Practice: GC FID Operational Tutorial - Learn English Speaking with Video

So to use the GC, we're going to click Huser, and then look at this icon right here called GC Solution.

That's the one we're going to use, but first we have to turn on these gas canisters first.

The first one is the air, then the nitrogen.

Finally, it will turn on the hydrogen.

Next, Adam's going to turn on the instrument with a button located on the side.

As you can see, all three lights are green.

Next, we're going to open the software.

We'll click this little icon here.

It looks like the instrument and it's under the one.

We'll just click OK.

That's fine.

Click top and we'll go to instrument parameters and then click system on.

It says download the instrument parameters.

We'll click OK.

At this point the instrument will try to heat up and ignite, all you have to do is wait.

So your first step is going to be to go to instrument parameters, and you can go file,

new method file, and that sets up a new method file.

So then what we're going to do is we're going to go to the column

this is the column that's in there you don't need to change anything there

so that's fine that's okay you can set the temperature of your detector usually

we keep ours at 200 degrees Celsius so we'll leave

that there this is where you determine your column

and it's right here so it starts off at 25 degrees

and you can hold it at 25 degrees for let's say one minute

and hit enter and then we want it to heat up to 50 degrees

so we type in 50 as you can see there

and then this is the rate per minute that is going to increase

so let's say we want to go up five degrees every minute

it's going to stay at 25 degrees for one minute

and then go from 25 to 50 over a course of five minutes

which is how we get our total program runtime of six minutes once

you've set all these parameters to the way you want it.

The start temperature is going to be 25 degrees.

You just click this download button and it's going to download that method to the instrument.

Next we're going to show you how to run a sample, so you go fast processing,

batch table wizard, load method file, you select the method file you just created and saved,

I didn't you how to save it click next standard unknown

we want standard only click next we're going to go ahead

and click under standard sample file is going to be zero

because we're doing manual injection next this is really where you can do whatever you want you can name the file

so we'll name this one test and then for report format file we're going to go to

and then we'll click sample and then we'll scroll over to method symbol

and that's going to be our report file format

and then we'll click finish and now we're ready to go

so what we're going to do is we're going to hit start save current batch file we do you type

Open the same name as earlier, save, yes, save, okay.

And with our sample, we're going to inject it in the injector, show right here.

So we put it in, and then we're going to put in one microliter.

Alright, once it's in there, we're going to click start on here, and then we immediately have to go to injector and change the temperature.

You should go to set.

This is why you can't do it, set line config, and then we're going to go to line 1 and click enter, and then click return.

And now your sample is running.

After the experiment is completed, it will come up to a file like this,

and so what you can see here is where we have our chromatograph,

we have acetone, ethanol, butanol, three peaks.

To use this data, our first step is going to be to go to data analysis,

manual peak integration, and then we're going to remove all the peaks.

So you click here, and you click here, from here to here, and it removes all the peaks.

Then we're going to insert peaks, so we can go from here to here.

And then we'll insert another peak from here to here.

And then we'll insert a third peak from here to here.

And so those are our three integration values.

And then you go report in data, and it sends you a thing like this.

Next, we're going to insert a table right here and click OK head, and what you can see here,

I don't know if you guys can see it, let me try and zoom in,

there you go, can you guys see that,

so the table we just inserted, we have our three peaks, one, two, three, and we have the area and the retention time shown,

this is the integration area and you can use this to compare them so then we go back

and so we know peak one peak two and peak three

all right to shut down the instrument all you do is you go to this is the report file

so we don't need that

you go to instrument parameters there you go system off that's going to shut down the software

so you can just hit X.

You want to save your method file now you just hit X there

and start log off and then to shut the instrument all you have to do is click the button and then

So make sure you close the tanks.

✨ Video Öner

339 cümleler

Bu dersin kelimeleri ve konuşma notları

Bu konuşma dersi “GC FID Operational Tutorial” videosuna dayanıyor. En çok tekrarlanan kelimeler: click, file, peak, instrument, degrees. Bu videoda gölgeleme çalışması için 76 cümle ve 953 kelime var. Konuşma bölümü 7:12 sürüyor. Konuşmacı dakikada yaklaşık 132 kelimelik dengeli bir hızla konuşuyor; gölgeleme için rahat bir tempo. Kelimelerin %91’i İngilizcede en sık kullanılan 3.000 kelime arasında, bu yüzden kelime dağarcığını takip etmek kolay.

Bu videodaki önemli kelimeler

Videodan öğrenmeye değer 15 kelime, telaffuzu ve anlamıyla:

Kelime	Telaffuz	Anlam
insert fiil	/ɪnˈsɝt/	sokmak
parameter isim	/pəˈɹæm.ə.tɚ/	parametre
column isim	/ˈkɒləm/	kolon, sütun
icon isim	/ˈaɪ.kɑn/	ikon, ikona
compare fiil	/kəmˈpɛɚ/	karşılaştırmak, kıyaslamak
experiment isim	/ɪkˈspɛɹ.ə.mənt/	deney (n), tecrübe
symbol isim	/ˈsɪmbəl/	simge, sembol
injection isim	/ɪnˈd͡ʒɛk.ʃən/	enjeksiyon
hydrogen isim	/ˈhaɪdɹəd͡ʒ(ə)n/	hidrojen, müvellidülmâ
locate fiil	/ˈloʊˌkeɪt/	yerleştirmek
wizard isim	/ˈwɪzɚd/	büyücü, sihirbaz
scroll isim	/skɹoʊl/	tomar
nitrogen isim	/ˈnaɪ.tɹə.d͡ʒən/	azot, nitrojen
acetone isim	/ˈæ.sə.toʊn/	aseton
butanol isim		bütanol

Duyacağınız deyimsel fiiller

Kelime	Anlam
heat up fiil	ısınmak, ısıtmak

Dikkat edilecek telaffuzlar

Konuşmacı we're, we'll, don't gibi kısaltılmış biçimleri 36 kez kullanıyor. Bunları duyduğunuz gibi kısa söyleyin.

“sh” ve “zh” sesleri: integration /ˌɪn.tɪˈɡɹeɪ.ʃən/, injection /ɪnˈd͡ʒɛk.ʃən/, retention /ɹɪˈtɛnʃən/
Uzun kelimeler — vurguyu doğru yere koyun: parameter /pəˈɹæm.ə.tɚ/, integration /ˌɪn.tɪˈɡɹeɪ.ʃən/, experiment /ɪkˈspɛɹ.ə.mənt/, chromatograph /kɹoʊˈmæ.toʊˌɡɹæf/

Türkçe konuşanların zorlandığı sesler:

Kelime başındaki ünsüz kümesi — araya ünlü eklemeyin: scroll /skɹoʊl/, chromatograph /kɹoʊˈmæ.toʊˌɡɹæf/
/æ/ — “e”den daha açık: parameter /pəˈɹæm.ə.tɚ/, format /ˈfɔːɹ.mæt/, manual /ˈmæn.j(u)əl/, batch /bæt͡ʃ/, acetone /ˈæ.sə.toʊn/

Bu videoyla nasıl çalışılır

Videonun tamamını konuşmadan bir kez dinleyin ve bilmediğiniz kelimeleri not edin.
Normal hızda cümle cümle tekrar edin; ritminiz konuşmacıyla aynı olana kadar her cümleyi yineleyin.
Kendinizi kaydedin ve orijinaliyle karşılaştırın; insert, parameter, column gibi kelimelere özellikle dikkat edin.

Gölgeleme Tekniği Nedir?

Gölgeleme, başlangıçta profesyonel tercüman eğitimi için geliştirilen ve çok dilli Dr. Alexander Arguelles tarafından popüler hale getirilen, bilim destekli bir dil öğrenme tekniğidir. Yöntem basit ama güçlüdür: ana dili İngilizce olan bir sesi dinler ve hemen yüksek sesle tekrar edersiniz — konuşmacıyı 1-2 saniye gecikmeyle takip eden bir gölge gibi. Pasif dinleme veya dilbilgisi alıştırmalarının aksine, gölgeleme beyninizi ve ağız kaslarınızı gerçek konuşma kalıplarını eşzamanlı olarak işlemeye ve yeniden üretmeye zorlar. Araştırmalar, telaffuz doğruluğu, tonlama, ritim, bağlı konuşma, dinleme anlama ve konuşma akıcılığını önemli ölçüde geliştirdiğini göstermektedir — bu da onu IELTS Konuşma hazırlığı ve gerçek dünya İngilizce iletişimi için en etkili yöntemlerden biri yapar.

Shadowing tekniği: adım adım eksiksiz rehberi okuyun →

Shadowing Practice: GC FID Operational Tutorial - Learn English Speaking with Video

Introduction to HPLC - Lecture 1: HPLC Basics

Transient Thermal Analysis in ANSYS AIM

GitHub Copilot now controls your command line...

4 How to use PCR and qPCR

GCSE Physics - Energy Stores, Transferring Energy & Work Done

The Semiconductor Production Process Explained Clearly

Executing Monitoring, Evaluation and Learning (MEAL) | Complete Practical Guide

Petroleum - 06 - Drilling Fluid Laboratory

Aircraft Gas Turbine Engines #01 - Introduction Part 1

What is SCADA?

FAST Scan (Focused Assessment with Sonography in Trauma) - STEP by STEP

Formulation and Chemistry behind an Eyebrow Gel product #cosmeticFormulation