Luyện nói tiếng Anh bằng Shadowing qua video: ATPL Instrumentation - Class 2: Pressure Measurement.
Chọn chế độ luyện tập
Mỗi chế độ mở một phòng luyện tập toàn màn hình.
125 câu
Nếu các câu quá ngắn hoặc quá dài, hãy bấm Edit để chỉnh sửa.
1
Lots of aircraft systems need to have their pressure measured
2
and monitored to make sure they are working in a safe and effective manner.
3
We also need to know the pressure of the air around us
4
which we can use for various things that we'll look at in the next few classes.
5
So how do we even measure pressure?
6
Let's find out.
7
Hi I'm Grant and welcome to the second class in the instrumentation series.
8
Today we're going to be having a look at how we measure pressure.
9
Pressure is used for lots of different things in aviation
10
and we use the pressure data to generate more useful information for us whilst we're flying
11
which we'll look at in the next few classes.
12
But for today though we're just going to focus on how we actually measure it
13
so without further ado let's find out what it's all about.
14
Ah I couldn't keep his right face.
15
The most common and fundamental type of pressure sensor is a diaphragm.
16
A diaphragm is essentially a thin circular flexible plate or membrane.
17
It can be made of various materials like metal, rubber or plastic
18
and the diaphragm is fixed around its edge creating a sealed chamber on one side set to a known pressure.
19
When a pressure difference exists between the two sides, the known pressure and whatever we're trying to measure,
20
then the diaphragm will effectively bend or deflect.
21
It's kind of like a hydraulic actuator but using air or some other pressure source instead of hydraulic fluid.
22
The amount of deflection is directly proportional to the pressure difference between the two sides
23
and we can then attach a mechanical linkage
24
or an electrical sensor to the centre of the diaphragm to measure how much this moves by
25
and this movement is what gives us our pressure reading
26
and what we are reading can be a few different units it can be quite confusing
27
and what you'll often see is millibars and hectopascals they're exactly the same
28
and then you'll see one bar which is a thousand millibars is equal to 14.5 psi pounds per square inch.
29
There's not really any rhyme or reason as to why we measure some things in psi
30
and other things in millibars or hectopascals.
31
It can be quite confusing.
32
Generally air pressure is hectopascals and components
33
and things like mechanical like the engine oil pressure and hydraulic pressure is measured in psi.
34
I don't know why but that just seems to be the way that I've notice things go.
35
Diaphragms, anyway, are rugged and simple.
36
They're often used in basic air pressure gauges with the seal side set to normal sea level pressure
37
and even some basic systems like the oil pressure measurements in the engine might use this sort of diaphragm.
38
A more specialized type of sensor that's very important is the aneroid capsule.
39
An aneroid capsule is kind of like a diaphragm
40
but instead of being a single flat disc in a container it's essentially a flexible metal box with corrugated sides
41
which makes it very responsive.
42
These capsules are evacuated which means
43
that most of the air has been removed from the inside creating a near vacuum where the pressure is essentially zero.
44
The capsule is designed to measure absolute or total pressure
45
that is the pressure
46
that is relative to a near vacuum not just the outside
47
atmosphere as a reference just like in the diaphragm hopefully
48
that makes sense when the external pressure increases this compresses the capsule
49
because there's no pressure for it to resist against and
50
when the external pressure decreases the capsule expands this is good in aviation
51
because we don't need to feed in a reference pressure to measure the difference against.
52
And in aviation, we often change pressure a lot when we climb and descend in the atmosphere.
53
So getting a source of that reference pressure can be quite hard.
54
This is just measuring the total absolute pressure, nothing needs to be compared against, which is good for us as we're flying.
55
Bellows are just stacks of aneroid capsules joined together.
56
The purpose of joining them together is that each capsule is inflating and deflating according to the pressure a small amount.
57
Therefore, when we stack them together, we stack the total movement of those capsules together.
58
Therefore, it's much easier to measure small and precise pressure changes, and we can measure larger total pressures in general.
59
Bellows can also be pressure fed, whereby the internal structure isn't near vacuum,
60
but instead has a pressure fed in just like a diaphragm
61
or you might call this not an anoid capsule
62
but a pressure fed capsule it's the same sort of thing
63
and we can call this a pressure fed bellows therefore we can also measure pressure differentials with much more precision
64
if we wanted and these sensors are great for use in things where we need to measure
65
and adjust pressure to a very specific value such as the manifold pressure in a piston engine while diaphragms,
66
capsules and bellows are membranes essentially, the Borden tube uses a different principle for deformation.
67
A Borden tube is a C-shaped tube essentially.
68
One end of the tube is sealed and it's free to move, move up and down left and right, while the other end is fixed but this is open to the pressure source.
69
When pressure is applied, the tube attempts to straighten out.
70
It's kind of like one of those things at parties that you blow into and they make a honking noise.
71
You know, they're sort of curled up like this and you blow them and you go, it's basically one of those, but it doesn't make a honking noise.
72
The straightening movement is mechanically linked to a needle via gears and other linkages.
73
and by the movement of this C-shaped tube moves the dial and that's how we display the pressure.
74
Burden tubes are pretty robust and can handle much higher pressures than simple diaphragms
75
which makes them ideal for systems that have quite high pressure such as the hydraulic system.
76
Pressure transducers are basically small electric diaphragms.
77
A small metal diaphragm deforms and the metal moving presses on a resistive element
78
that will change its resistance depending on the pressure that's put on it.
79
There's electricity flowing through the resistive element, so when it changes, the voltage across it changes,
80
which can then be measured and translated into a pressure reading and sent to a dial or a digital display.
81
The main advantage of a transducer is that it doesn't need to be fed with the source of the pressure.
82
we aren't sending the engine oil or hydraulic fluid into the sensor to be measured specifically.
83
If you think about measuring oil pressure using a burden tube for example, the previous one that we saw, we would need to send some of the oil to the pressure gauge which is in the cockpit
84
requiring extra tubes to send the oil out of the way to the instrument and then back again back into the engine.
85
Because the data generated by a transducer is electronic we don't need extra pipes and tubes to send it to the sensor.
86
We just place one of these sensors in an existing tube or pipe and then wire up.
87
This means we can place the sensors at the source
88
and not worry about leaks from let's say the hydraulic reservoir to the cockpit.
89
It also means it's easy to add redundancy and multiple sensors to the same thing therefore improving reliability and minimizing false readings.
90
This means that you'll see electronic transducers
91
to sense pressure all over the place in large aircraft where we want multiple sensors for everything to make sure
92
that there's no problems.
93
In summary then we've got a diaphragm which is basically a disc that deforms.
94
That deformation is used to measure a pressure difference therefore we
95
need to have a reference pressure fed into a diaphragm on one side
96
and then the other side is the thing we want to measure
97
and then it will be the pressure difference between the reference and the measured pressure that we're actually getting a reading for.
98
We also have aneroid capsules which is essentially a bellows but without all the components.
99
What will happen inside an aneroid capsule is you'll have zero pressure near enough
100
and then we're going to measure the total pressure
101
that is surrounding the aneroid capsule because
102
if there's less pressure the capsule will expand and
103
if there's more pressure the capsule will deflect and we're just going to measure that movement.
104
The problem is we only get a small amount of movement
105
so what we can do is we can add loads of aneroid capsules together to create a bellows.
106
The same principle applies if there's lots of pressure around the outside of this, this whole thing will compress.
107
If there's less pressure around the outside, the thing will expand.
108
The advantage of having them all stacked together is we get a lot of movement
109
and we can be much more precise with our measurements of total pressure
110
which you might use for things where you want to set a pressure reading like in a piston engine.
111
You get a board on tube which is a party hooter.
112
You blow it and it straightens out.
113
It's the same principle with this except instead of blowing on it you're measuring some sort of pressure.
114
At this end the c-shape tries to straighten out.
115
The straightening of this section here pulls on mechanical linkages,
116
gears etc and moves a dial to display how much is straightening out
117
and therefore how much pressure is being fed into the source there.
118
You also get pressure transducers, essentially electronic diaphragms.
119
The diaphragm deflects, the metal diaphragm here deflects and
120
that metal diaphragm pushes on a resistive element
121
and the resistive element changes its resistance according to how much pressure is put on it.
122
we measure the voltage across the resistor and by measuring
123
that voltage we can then convert that into a display which shows how much pressure is being put on the diaphragm.
124
So that's just how we measure pressure
125
and in the next few classes we'll look at how to actually use that pressure for giving us some useful information.
Tải Ứng Dụng
Mọi thứ bạn cần để nói trôi chảy
Chấm điểm AIChấm từng câu nói
Luyện IPAThành thạo mọi âm
Từ vựngMở rộng vốn từ
Game Từ vựngHọc qua chơi
Cùng kênh
FOR YOU
Video gợi ý
C11
4 câu
Ambr®️ 250 High Throughput Perfusion Product Tutorial - Learn with Sartorius
Business EnglishUniversity StudentsWorking Adults
C11
153 câu
In 9 minutes, you’ll understand breathwork better than 99% of the planet
Business EnglishUniversity StudentsWorking Adults
C18
152 câu
How to Scale Analog Values in PLC Programming!
Business EnglishUniversity StudentsWorking Adults
C13
85 câu
Material Properties 101
Business EnglishUniversity StudentsWorking Adults
C11
69 câu
CAA NZ Standard Overhead Join 2022
Business EnglishUniversity StudentsWorking Adults
C167 câu
STARTING AIR SYSTEM|HOW STARTING AIR IS ADMITTED IN CYLINDER UNIT| WHAT IS SLOW TURNING VALVE|
Business EnglishUniversity StudentsWorking Adults
C12
72 câu
Blood Flow Through the Heart (Made Easy in 5 Minutes!)
Business EnglishUniversity StudentsWorking Adults
C13
5 câu
Full ATIS breakdown ✈️ #flighttraining #airlines #pilot
Business EnglishUniversity StudentsWorking Adults
C11
240 câu
Flying a plane badly, on purpose.
British AccentBusiness EnglishUniversity StudentsWorking Adults
B22
141 câu
QUALITY CONTROL Interview Questions & Answers! (Inspector, Manager + Assessor Interview Questions!
Business EnglishInterview EnglishUniversity Students
C16
25 câu
3M™ Clean-Trace™ ATP Monitoring System Environmental Surfaces Sampling
Business EnglishUniversity StudentsWorking Adults
Bối cảnh và Nền tảng
Trong video này, diễn giả Grant đã giới thiệu về tầm quan trọng của việc đo áp suất trong các hệ thống hàng không. Việc theo dõi áp suất không chỉ đảm bảo rằng mọi thứ hoạt động an toàn mà còn giúp thu thập dữ liệu để cung cấp thông tin hữu ích khi bay. Việc hiểu rõ cách đo áp suất là điều cần thiết để có thể áp dụng kiến thức này vào thực tế trong ngành hàng không.
5 Câu Chuyện Hàng Ngày Cần Thiết
- How do we measure pressure? - Làm thế nào chúng ta đo áp suất?
- It's kind of like a hydraulic actuator. - Nó giống như một thiết bị tác động thủy lực.
- The amount of deflection is directly proportional to the pressure difference. - Mức độ uốn cong tỷ lệ thuận với sự chênh lệch áp suất.
- These capsules are evacuated. - Những chiếc capsule này đã được hút khí.
- It compresses the capsule. - Nó nén capsule lại.
Hướng Dẫn Luyện Nói Từng Bước
Để nâng cao khả năng luyện nói tiếng anh qua video này, bạn có thể làm theo các bước sau:
- Xem video trước: Hãy xem video một cách chú ý để nắm bắt nội dung chính. Chú ý đến cách diễn giả truyền đạt thông tin và ngữ điệu của họ.
- Ghi chú các câu quan trọng: Lưu lại những câu nói mà bạn thấy hữu ích, đặc biệt là những câu trong danh sách trên. Điều này sẽ giúp bạn nhớ và áp dụng chúng vào giao tiếp hàng ngày.
- Thực hành shadow speech: Nghe và lặp lại theo diễn giả từng câu một. Bạn có thể bắt đầu bằng cách lặp lại từng câu hoặc từng phần nhỏ cho đến khi bạn cảm thấy tự tin.
- Sử dụng phần mềm shadowing: Nếu có thể, hãy sử dụng các phần mềm hỗ trợ shadow speak để theo dõi cách phát âm và ngữ điệu của chính bạn. Điều này sẽ giúp bạn nhận ra những điểm cần cải thiện.
- Thực hành đều đặn: Đừng ngần ngại thực hành mỗi ngày. Việc luyện tập thường xuyên sẽ giúp bạn tiến bộ nhanh chóng và cải thiện khả năng giao tiếp của mình.
Bằng cách áp dụng những bước này, bạn không chỉ nắm được kiến thức trong video mà còn cải thiện đáng kể khả năng giao tiếp tiếng Anh của mình. Hãy kiên trì và luôn nhớ rằng, việc luyện tập là chìa khóa của thành công!
Ngữ pháp trong video
Những cấu trúc người nói dùng nhiều nhất, kèm đúng cụm từ trong video:
| Cấu trúc | Trong video |
|---|---|
| Câu điều kiện if + mệnh đề, will/would + động từ — điều kiện và kết quả | if there's less pressure the capsule will expand · if there's more pressure the capsule will deflect |
| Câu bị động be + quá khứ phân từ — nhấn vào việc xảy ra, không phải người làm | can be made · is fixed · is measured |
| Mệnh đề quan hệ who / which + mệnh đề — thêm thông tin về người hoặc vật | bar which is · evacuated which means · against, which is |
Phương Pháp Shadowing Là Gì?
Shadowing là kỹ thuật học ngôn ngữ có cơ sở khoa học, ban đầu được phát triển cho chương trình đào tạo phiên dịch viên chuyên nghiệp và được phổ biến rộng rãi bởi nhà đa ngôn ngữ học Dr. Alexander Arguelles. Nguyên lý cốt lõi đơn giản nhưng cực kỳ hiệu quả: bạn nghe tiếng Anh của người bản xứ và lặp lại to ngay lập tức — như một "cái bóng" (shadow) đuổi theo người nói với độ trễ chỉ 1–2 giây. Khác với luyện ngữ pháp hay học từ vựng bị động, Shadowing buộc não bộ và cơ miệng phải đồng thời xử lý và tái tạo ngôn ngữ thực tế. Các nghiên cứu khoa học xác nhận phương pháp này cải thiện đáng kể phát âm, ngữ điệu, nhịp điệu, nối âm, kỹ năng nghe và độ lưu loát khi nói — đặc biệt hiệu quả cho người luyện IELTS Speaking và muốn giao tiếp tiếng Anh tự nhiên như người bản ngữ.