Luyện nói tiếng Anh bằng Shadowing qua video: Material Properties 101
Đang tạo bài học...
1
This video is going to be a bit different to my usual videos, but I want to talk about material properties and the words we use to describe them.
2
This is information you are going to need to fully understand future videos.
3
By the end of this video, I want you to understand 6 keywords that we use to describe materials.
4
These are stiff, strong, ductile, brittle, tough and hard.
5
With these words, you will be able to describe pretty much any material
6
and better understand why certain materials are used in different applications.
7
More technical videos like this will be uploaded to my second channel from now on, which you can subscribe to by following this link.
8
I'll try and back up the technical stuff with interesting real-world examples.
9
First we are going to learn what a tensile test is.
10
A tensile test is a fundamental test in material mechanics.
11
It's performed by pulling a sample of material apart until failure, while measuring the force and displacement.
12
It provides us with something called a stress strain curve, which tells us a lot about the material's reactions to forces.
13
In this scenario, the stress is defined by the force applied to the test sample, divided by the cross-sectional area.
14
This gives us units of newtons per meter squared, which you may recognize as the metric unit for pressure, Pascals.
15
Stress goes on the y-axis.
16
Strain describes how much deformation has occurred with that applied force, and it is found by dividing the change in length by the original length.
17
This is placed on the x-axis.
18
Let's watch this test again and see what information we can get from the stress strain graph.
19
As the stress rises, the material begins to deform.
20
This initial linear region is elastic deformation, That means if we remove the force, the material will regain its original shape.
21
Think of how a rubber band can deform hugely and still come back to its original shape.
22
The end of this linear elastic deformation is marked by the yield point.
23
From here out, any additional stress will cause permanent deformation.
24
This is called plastic deformation.
25
The stress continues to rise until it hits the ultimate tensile strength point.
26
This is the ultimate strength of the material, the most stress it can handle.
27
From here, less stress is needed as the material begins to decrease in cross section, which you can see happening here.
28
This is called necking.
29
This continues until the material fractures.
30
We can get a lot of really useful information from this graph.
31
The first is Young's modulus, otherwise known as the elastic modulus.
32
This describes how stiff the material is, and it is obtained by finding the slope of this linear region.
33
A steeper slope means a stiffer material.
34
For example, a high carbon steel may look like this, whereas a flexible material with the low Young's modulus, like rubber, would look like this.
35
This graph is not to scale, but it should give you an idea of how this information is represented.
36
Young's modulus is one of the most used properties in engineering, as we can use it to predict deflection in a huge range of scenarios.
37
Yield strength and ultimate tensile strength are two other important properties.
38
An engineer will divide the yield or ultimate strength by the safety factor to achieve the max allowable stress, which is used to influence the design of the product.
39
Usually engineers will aim to keep the max possible stress well below failure, but safety factors differ between industries.
40
So we've seen a stiff material and a flexible material.
41
Now let's look at a material in between.
42
This material can be described as tuff and ductile.
43
Tuff simply means the material can absorb a lot of energy without breaking.
44
The area under the graph here defines how much energy is absorbed.
45
Ductile means it deforms under pressure.
46
The two previous materials could also be considered ductile.
47
Springsteel is a tough and ductile material with a high yield strength which is why it is used in springs.
48
Springs need to absorb energy without permanently deforming.
49
The opposite of ductile is brittle.
50
A brittle material is a material that breaks with very little deformation.
51
Glass, ceramics and cast iron all fall into this category.
52
You can actually tell if a material is brittle or ductile by examining the fracture surface after they have broken.
53
A ductile material will have this characteristic cup and cone fracture surface, whereas brittle fractures have granular flat looking fracture surfaces.
54
Some materials can go from ductile to brittle when their temperatures are lowered.
55
This was actually a massive problem during World War 2 with the Liberty ship.
56
Several Several of these ships literally broke in half with no warning, including the SS John P.
57
Gaines, which broke in half in the frigid waters of the Bering Sea.
58
It was later discovered that the grade of steel being used became brittle at lower temperatures.
59
This problem was made worse by the stress concentration at the hatches, which you learned about in my first video, Why are plane windows round?
60
This embrittlement is also thought to have contributed to the fracture of the titanic's hull.
61
The final material property I want to talk about is hardness.
62
It is directly related to the stiffness and yield strength of the material, but it is used to describe how difficult it is to dent, scratch and abrade materials.
63
One way this material property is measured is with the Rockwell hardness test.
64
This test involves three steps.
65
First a minor load is applied to the material by an indenter.
66
This establishes a zero point.
67
For the second step, a major load is then added, which indents the material.
68
And for the final step, the major load is removed, while maintaining the initial load.
69
The difference in depth between the first and third step is then used to calculate the hardness of the material.
70
Diamond is a very hard material, which is why it is used in cutting tools.
71
One of the fantastic properties of steel is its ability to be heat treated, to have its hardness tailored in different areas.
72
For example, with swords you want your cutting edge to be hard but the core of the blade to be ductile.
73
This means the sword can bend under pressure without breaking, while the cutting edge can resist damage.
74
As always, thanks for watching.
75
I wouldn't have the opportunity to make videos like this without sponsors like Lumart.
76
Lumart is a new way to get college done quickly, from the university or college you choose for a lot less money.
77
I was lucky enough to get an education in Ireland for pretty much free, but this is not a luxury many people have.
78
In the US, the cost of getting a higher degree from a university is prohibitively expensive.
79
And the Lumerit Scholar program is out to change that.
80
Whether you are aspiring to go to college, or you are already there, Lumerit can allow you to complete up to 3 years of college for $4,000 or less per year,
81
and allow you to take classes from anywhere in the world.
82
So how does it work?
83
A Lumerit counselor will help you plan out your college path, getting credits from schools that are guaranteed to transfer to your target school.
84
Go to lumertscholar.com forward slash realengineering to see how much you can save with Lumert Scholar.
85
They will email you and give you a personalized consultation to help you save thousands on your education.
📺 Cùng kênh
✨ Video gợi ý
C11
92 câu
How Things Are Made | An Animated Introduction to Manufacturing Processes
Business EnglishUniversity StudentsWorking Adults
C13
28 câu
0925.2 financial statements and ratios
Business EnglishUniversity StudentsWorking Adults
C150 câu
The Science of Stress: How Does Stress Affect Our Brains and Bodies?
Business EnglishUniversity StudentsWorking Adults
C11
103 câu
Hard Fasteners
Business EnglishUniversity StudentsWorking Adults
C15
188 câu
Fix your Trousers Fitting Issues | Body Specific Adjustments (Part 1)
Business EnglishUniversity StudentsWorking Adults
C112
47 câu
Essence of linear algebra preview
American AccentBusiness EnglishUniversity StudentsWorking Adults
C12
32 câu
Equilibrium of Rigid Bodies (2D - Coplanar Forces) | Mechanics Statics | (Solved examples)
Business EnglishUniversity StudentsWorking Adults
C12
131 câu
Unit Conversion & Significant Figures: Crash Course Chemistry #2
Business EnglishUniversity StudentsWorking Adults
C11
132 câu
Video
Business EnglishUniversity StudentsWorking Adults
C124 câu
Sofeast PCB Video Series Introduction
Business EnglishUniversity StudentsWorking Adults
C1117 câu
Anatomy & Physiology: The Ultimate Beginner's Guide | Dr. Bee's Tutorials
Business EnglishUniversity StudentsWorking Adults
C14
139 câu
Introduction 2, Why "Portland" cement
Business EnglishUniversity StudentsWorking Adults
Từ vựng và ghi chú luyện nói cho bài học này
Bài luyện nói trình độ C1 này dựa trên video “Material Properties 101”. Những từ được nhắc lại nhiều nhất trong bài: material, stress, ductile, brittle, strength. Video này có 85 câu và 1264 từ để luyện shadowing. Phần lời nói dài 6:06. Người nói nói nhanh, khoảng 207 từ mỗi phút, nên sẽ có nhiều chỗ nối âm và nuốt âm. 82% số từ nằm trong 3.000 từ tiếng Anh thông dụng nhất; phần còn lại nên xem trước khi luyện.
Từ vựng quan trọng trong video
15 từ khó nhất trong video, kèm phiên âm và nghĩa:
| Từ | Phiên âm | Nghĩa |
|---|---|---|
| brittle tính từ | /ˈbɹɪtəl/ | giòn |
| fracture danh từ | /ˈfɹæk.t͡ʃʰəː/ | gãy xương |
| stiff tính từ | /stɪf/ | cứng |
| graph danh từ | /ɡɹæf/ | biểu đồ |
| absorb động từ | /æbˈsɔɹb/ | hút |
| tuff danh từ | /tʌf/ | đá túp |
| axis danh từ | /ˈæksɪs/ | trục |
| tailor danh từ | /ˈteɪlɚ/ | thợ may |
| dent danh từ | /dɛnt/ | vết lõm |
| ceramic danh từ | /səˈɹæmɪk/ | gốm |
| metre danh từ | /ˈmiːtəɹ/ | mét, thước |
| mechanic danh từ | /mɪˈkænɪk/ | thợ máy |
| hatch động từ | /hæt͡ʃ/ | nở |
| cone danh từ | /ˈkoʊn/ | nón |
| calculate động từ | /ˈkælkjʊleɪt/ | tính toán, tính |
Cụm động từ bạn sẽ nghe
| Từ | Nghĩa |
|---|---|
| back up động từ | lùi |
Ngữ pháp trong video
Những cấu trúc người nói dùng nhiều nhất, kèm đúng cụm từ trong video:
| Cấu trúc | Trong video |
|---|---|
| Câu bị động be + quá khứ phân từ — nhấn vào việc xảy ra, không phải người làm | will be uploaded · is defined · is found |
| Thì hiện tại hoàn thành have/has + quá khứ phân từ — việc đã xảy ra nhưng còn liên quan đến hiện tại | has occurred · we've seen · have broken |
| Mệnh đề quan hệ who / which + mệnh đề — thêm thông tin về người hoặc vật | stress, which is · strength which is · material, which is |
Phát âm cần chú ý
Người nói dùng 3 dạng rút gọn, ví dụ I'll, we've, wouldn't. Hãy nói theo dạng ngắn đúng như bạn nghe.
- Âm “sh” và “zh”: deformation /ˌdɛfəˈmeɪʃən/, deflection /dəˈflɛkʃən/, sectional /ˈsɛkʃənəl/, consultation /ˌkɑnsəlˈteɪʃən/
- Từ dài — đặt trọng âm cho đúng: deformation /ˌdɛfəˈmeɪʃən/, allowable /əˈlaʊ.əbəl/, personalize /ˈpɜː.sə.nə.laɪz/, characteristic /ˌkæɹ(ə)ktəˈɹɪstɪk/, consultation /ˌkɑnsəlˈteɪʃən/
Những âm người Việt thường gặp khó:
- Cụm phụ âm cuối — đọc đủ từng âm, đừng nuốt âm cuối: deform /dəˈfɔɹm/, absorb /æbˈsɔɹb/, embrittlement /ɛmˈbɹɪtl̩mənt/, indent /ɪnˈdɛnt/, displacement /dɪsˈpleɪsmɪnt/
- Âm /tʃ/, /dʒ/ và /ʒ/ — tiếng Việt không có, đừng đọc thành “ch” hay “gi”: fracture /ˈfɹæk.t͡ʃʰəː/, modulus /ˈmɑdʒələs/, frigid /ˈfɹɪd͡ʒɪd/, hugely /ˈhjuːd͡ʒli/, hatch /hæt͡ʃ/
- Âm /æ/ — mở miệng rộng hơn âm “e”: fracture /ˈfɹæk.t͡ʃʰəː/, graph /ɡɹæf/, absorb /æbˈsɔɹb/, axis /ˈæksɪs/, granular /ˈɡɹæn.jə.lə(ɹ)/
Cách luyện với video này
- Nghe hết video một lần, chưa cần nói, và ghi lại những từ bạn chưa biết.
- Bắt đầu ở tốc độ 0,75×, nói đuổi từng câu, rồi quay lại tốc độ bình thường khi đã quen.
- Ghi âm giọng mình rồi so với bản gốc, chú ý các từ như brittle, fracture, stiff.
Phương Pháp Shadowing Là Gì?
Shadowing là kỹ thuật học ngôn ngữ có cơ sở khoa học, ban đầu được phát triển cho chương trình đào tạo phiên dịch viên chuyên nghiệp và được phổ biến rộng rãi bởi nhà đa ngôn ngữ học Dr. Alexander Arguelles. Nguyên lý cốt lõi đơn giản nhưng cực kỳ hiệu quả: bạn nghe tiếng Anh của người bản xứ và lặp lại to ngay lập tức — như một "cái bóng" (shadow) đuổi theo người nói với độ trễ chỉ 1–2 giây. Khác với luyện ngữ pháp hay học từ vựng bị động, Shadowing buộc não bộ và cơ miệng phải đồng thời xử lý và tái tạo ngôn ngữ thực tế. Các nghiên cứu khoa học xác nhận phương pháp này cải thiện đáng kể phát âm, ngữ điệu, nhịp điệu, nối âm, kỹ năng nghe và độ lưu loát khi nói — đặc biệt hiệu quả cho người luyện IELTS Speaking và muốn giao tiếp tiếng Anh tự nhiên như người bản ngữ.