Luyện nói tiếng Anh bằng Shadowing qua video: Intro To TTrades Fractal Model [Indicator & Settings]

How's it going everyone?

This video is going to be a basic introduction into my fractal model.

However, the main focus of this video is going to be going over my indicator

and its settings and how it is used.

So let's hop into the first example here to explain the fractal model and then how the indicator would plot it.

So my fractal model relies on the foundational understanding that the market cannot reverse without a swing point.

So you can see here the market has formed a swing point to reverse

or go from bearish to bullish and

if we are going to reverse from bullish to bearish we are also going to form a swing point.

Now what do I use to determine if the market is likely to reverse?

I will use candle closures.

So you can see here price has swept out its previous candles high and then closed back inside the range.

So if you've seen my daily bias video, you know that I would be bearish or looking for previous day low.

So with that understanding that I'd be looking for a previous day low or a run lower this next day, I'd be looking for an open high low close.

Now to confirm this bias, I would go down to the hourly time frame from the daily

and look to see if we have a change in the state of delivery.

So down here on the hourly chart, do we have a change in the state of delivery confirming the swing point?

Well, you can see we have closed through the series of up-close candles that have made this high.

So I consider this high protected, and then I will look to trade the open, high, low close in the following candle.

So you can see here, as we let this play out, you can see we reach higher, we sweep out a high to the left,

and then we get an opposing candle formation here.

So I'd anticipate this wick to have formed, and then I can look to trade this lower the rest of the day.

So I could either get on side in this next candle here, or in this hourly candle, or wait for a New York session.

So you can see here as we approach the New York session, what happens?

We sweep out this high to the left.

We then close through the down close candle that made that high.

So if I wanted to put on a position, I could put on a position on the close of this candle, and I stop on the high, and looking for 2R.

Let's see how this works out.

So it makes us wait some time, but we do hit RTP on that trade.

So just to review the foundational concepts within the fractal model, a higher time frame closure, in this case price swept out its previous day high, and closed back inside the range.

We have a change in the state of delivery that confirms that reversal.

And then in the following candle, I'm looking to trade the open high, low close, is that is what is determined by my higher time frame bias.

So you can see here, this is how I would mark it out.

Now to make this more efficient for myself, with the help of two degrees, I have designed my own indicator to mark this out all for me.

So let's go ahead and re-walk through this price action, but with my indicator.

So you can see on this new candle close, it has identified that it's taken the previous day's high, closed back inside the range, and is also paired with a change in the state of delivery.

With this it will mark out projections to give myself targets as well as mark out a T spot

Which is an area that I look for higher time frame wicks to be formed

So for instance

if we are going to trade lower here I would like

to see price trade into this gray area Form a high

or a higher time frame wick

and then trade lower throughout the day As we let this continue out This is

when I would then mark up my opposing candle formation

And I would like to see this trade lower throughout the day

and you can see as we get into the next day here

because we have closed bearish I will then look for a continuation in this following candle

if we let this play out you can see we do get this continuation lower

and then we finally go and take out these lows to our left

so you can see that is what my indicator looks like now let's go back

and take a look at this New York session setup, where we have swept out this high here.

Since my model is fractal, hence the name of the fractal model, I can apply this on multiple time frames.

So here we are on the daily and hourly, but let's say I wanted to go in here on the hourly and five minute, I could go ahead and rewind this,

drop down to the five minute time frame, and the indicator would auto adjust for that.

So you can see we've taken out this high.

If I had a bearish bias, I could go ahead and switch this to bearish, and it'll only seek out the bearish setups.

And then as I let this continue, here we get this higher time frame candle closure,

the five minute setup, and then I'm anticipating the higher time frame wick to form in this area to trade lower.

So as we let this play out, you can see we respect that area, and then we get a continuation there to the lows to the left,

and to our standard deviation projections.

So let's go ahead and go through all my indicator settings.

So the first setting is a warning and error messages.

Do I want to have that turned on?

I personally do, because if I'm not on an automatic time frame, let's say I am on the 1 minute and 15 minute model, and I'm on the 5 minute time frame, I'm going to get an error

because the 5 minute is greater than the 1 minute or the lower time frame in that case.

So I want to see that time frame, and I can see that I need to go to a 1 minute time frame or below to view it.

Now in our general settings, if I want to get alerts when setups form, I'm going to go ahead and have this toggle turned on

and follow the instructions to get the alerts that I want to have.

Now in terms of history, this is going to show how many previous setups on the chart.

So if I only want to see the current setup, I can go ahead and make that a 0, and it would only show the current setup.

So for instance, if I let this continue to play out, it would then disappear.

If I have that setup to 1, then it would go ahead and show the most recent setup, and I can go all the way up to 40 for those setups.

So let's say I go to 15, hit OK.

you can see this will show the last 15 bearish setups because I also have my bias to bearish.

So let's go ahead and pull back up our settings here.

Now C2, C3, and C4 are the higher time frame candle closures.

Now I go over all the requirements for these within my course and mentorship, but essentially this means candle 2,

candle 3, candle 4, and then specific candle closures with that.

So you can see this will show a candle 2 closure.

If I don't want to see a candle 2 closure, I can go ahead and turn that off.

Then I will only see candle 3 closures with candle 4 continuation.

I personally like to have all of these on because I like to view all of them.

Now you may notice on the chart there are a few different colors of these C2, C3, and C4.

A gray C2 is when the setup has remained valid throughout candle 4.

A red C2 is when that setup fails within the first candle, and an orange C2 is when that setup fails but not the first candle after but the second candle after.

Now going into my bias, this is where I can select my bias So in the previous example I just showed you, I was bearish going into the New York session

So I went ahead and selected it to bearish And you can see how all of the bullish setups will disappear

As I have chosen a bearish setup, right?

And so that will only show me the bearish setups If I want to see bullish, I can go ahead and select bullish

And then it will show me all the bullish setups

and not the bearish If I don't have any bias or a neutral bias I can select neutral, and it will show me both bearish and bullish setups.

Now the cool thing about this indicator is I can go ahead and adjust my kill zones through the time frame filter.

So for instance, you can see all of these different setups here.

But let's say I'm only interested in price in the New York session between 8 to 11.30.

So I could go ahead and take a look at this, adjust it from 8 to 11.30.

And one thing about this, it's going to choose the whole hour's candle.

So this means I would have to wait for the 9 a.m closure.

So if I want to include the whole 8-hour closure, I'm going to have to choose 7 a.m for this.

With that selection, it has removed all of the setups that were not inside the kill zone.

100

Now, if I have multiple different kill zones, I can have up to three.

101

So let's say I want to view London and New York a.m session.

102

I can go ahead and select that, and then I'll get those setups as well.

103

Now, going into a few of the customizable settings, the higher time frame candles or the power three candles on the right side.

104

I have the option to hide those if I don't want to view them.

105

And then I can also change the size of them.

106

So you can see now they are hidden.

107

I will go ahead and bring them back.

108

And you can adjust the size of them between small, medium, and large.

109

Now an offset will offset it from your chart.

110

So currently it has this default offset of this location here where it's going to offset it about that much.

111

Let's say I want more space between my chart and my higher time frame candles.

112

I can go ahead and just adjust this offset to 10 or whatever you select, and that will move these candles to the right.

113

So you can see those candles now have moved to the right and basically doubled the offset there.

114

The body, border, and wick of the candles are pretty self-explanatory.

115

Those will just adjust the colors of the higher time frame candle.

116

Now the higher time frame open, this will mark out the current higher time frame open of the higher time frame candle.

117

So you can see at this 12 a.m hourly candle, it is marking out the open of that.

118

If I wanted to turn that off, I can go ahead and turn that off there, or I can adjust these settings between solid, dashed, and dotted.

119

Now open close time is going to be those vertical lines, which I find very important in my analysis for separating the individual open high low close.

120

So you can see each of these three hours over here are separated vertically here.

121

I can go ahead and turn that off if I do not want to view it.

122

And you can see that is what it looks like with it turned off.

123

Now the low and high lines are going to go ahead

124

and mark out the high and low of each hour on the lower time frame chart.

125

This is not something I personally wish to see, so I go ahead and leave it off for my default settings.

126

Now going into the model style, do you want to show my fractal model labels?

127

That is going to be the C2, C2 failed, C4, all of those labels.

128

So if I want to have those on, I'll have those on and I can choose the size of them

129

or I can go ahead and turn them off if I do not want to view them.

130

Now the candle one sweep is going to mark out

131

that first candle that was swept out from the higher time frame closure.

132

So you can see it will mark out the previous candle's high here as well as on the lower time frame.

133

I personally like to view that.

134

Now here I have the choice for my change in the

135

state of delivery between two options for a bullish change in the state of delivery

136

and bearish change in the state of delivery.

137

I personally keep them the same color

138

but some people do want to see the bearish change in the state of delivery as a different color.

139

So for instance

140

if I wanted a different color on the bearish change in the state of delivery I'm going to adjust

141

that setting and then you can see it will adjust between bearish and bullish.

142

Now for candle equilibrium, that is just going to mark out this higher time frame candles EQ.

143

So you can see it is marked out there as well as on the lower time frames.

144

If you don't want to see that, you can go ahead and turn that off with the toggle and it will disappear.

145

Now for the T spot, this is the area in the higher time frame candles that I look for the higher time frame wick to form.

146

So essentially on my short setup here, I'm expecting price to open, high, go lower, and then close.

147

So I'm anticipating a high to be formed in this box.

148

So those are the settings for that, and you can adjust those boxes how you see fit.

149

By default, they will be gray and green, as that is how I have them.

150

Now going into the projections, these are currently drawn from the bodies, so the series of bodies in the change in the state of delivery.

151

I can go ahead and adjust the manual input on these projections.

152

These are the default settings that will be there.

153

But let's say I wanted to add in something different.

154

Let's say I wanted to add in a negative five.

155

I can just type in a comma and negative five, click out of this, and then the script will go ahead and add in that custom projection.

156

So you can see how we have just added in a new projection there.

157

So if you use different projections than me, you can go ahead and add those in manually.

158

Now with the labels of the projections, you can go ahead and adjust those too, however you see fit.

159

Or you can go ahead and turn them off entirely by clicking this box right here.

160

And you can see the labels will disappear completely.

161

Now one thing I wanted to talk about here is I'm

162

going up to the higher time frame on the hourly

163

and you can see we should have a setup being printed but it is not.

164

Why is that the case?

165

So you can see I still have my time frame filter marked out here which won't show up on the hourly.

166

So I want to go ahead and adjust the choose below period

167

and adjust this to something below the current time frame I want it to show up on.

168

So you can see this time filter will only apply on the 30 minute time frame

169

or below for this given kill zone.

170

So you can see how that now has adjusted to print on the chart.

171

Now the last thing I want to talk about is the formation liquidity.

172

So you can see right here formation liquidity, a dotted line.

173

What is that?

174

Well, given this candle closure here and looking bearish, I want to see price run out previous candles lows or previous days lows.

175

As you can see, this previous days low here has already been taken.

176

However, this previous days low has not been taken, and that gets marked out there by the formation liquidity.

177

Now the last thing we can talk about here is the table.

178

So you can see down here on the right, it'll go ahead and give me the time frame asset, what fractal model I am set to.

179

So you can see, because I have it on automatic, it is currently on the daily and hourly.

180

The time until close, so there's four hours until this higher time frame candle closes.

181

My bias I have selected, so you can see it is currently neutral, but if I adjust that up here, it will show.

182

And then I can also show my time frame filters that I have set.

183

Now all of this is pretty customizable.

184

If you do have stuff that you want added into this indicator, I'm always going to be improving this, so just go ahead and shoot me a message and I will see if it makes sense.

185

But let's go over a couple more things such as overlapping the indicators.

186

So here we are going to go over a few examples

187

of overlapping the higher time frame t-spot with a lower time frame setup.

188

So you can see here we are in this higher time frame t-spot.

189

We have a sweep of these consolidation highs and then we close back inside the previous bar.

190

So looking for price to trade lower here, what I could do is go ahead and copy this indicator by right click,

191

copy, command v, and paste on a second one, move this to the lower time frame.

192

So instead of having it on the daily and hourly, go to automatic, and then I would go down to the five minute time frame.

193

Now down here on the five minute time frame, you can see it's a bit messy because it's overlaying the higher time frame candles with the lower time frame candles.

194

So I'll go ahead and hide these higher time frame candles, and I'll just view the lower time frame candles here.

195

So you can see, I'll go ahead and remove the drawings As we get into this next candle

196

You can see it prints the setup, right?

197

So we have the T spot right here on the 5 minute chart So

198

if I was looking for a setup to trade lower I

199

could either just take an entry here with my stop on an invalidation Or look for a confirmation setup in here

200

And you can see what happens here We start to trade that lower, right?

201

and you can see we did get a bullish setup

202

that printed right here right and that did fail right away as it was opposing the higher time frame one.

203

Now with the closure lower I'd be looking for a continuation out of this area.

204

Now as we let this play out you can see once it closes over this area

205

that I'm looking for a continuation

206

this will turn red because that is not ideal for me to be looking for a continuation lower

207

when it closes over that level.

208

And you can see that closure right there over my level was the early warning

209

that this setup was not likely to continue.

210

So let's go back out to the hourly time frame to see if there's any other setups.

211

So you can see as we get into the next day here, what occurs is we have a candle to closure on the daily chart setting up an hourly setup.

212

So you can see if we zoom in, I'd be wanting to see the higher time frame wick form in this area here, and we have a fair value gap here.

213

So narrowing down this point of interest, I can drop down to the hourly and five minute to see if a setup occurs in this area that is bullish.

214

So you can see, as we let this play out, there was a bearish setup.

215

And you can see, what do we notice?

216

The continuation from this bearish setup has failed.

217

And that is what actually creates the bullish candle to closure.

218

Now in this area, we have the hourly T spot, which I'd want to see hold, and a five minute T spot right here.

219

Now with the closure through these opposing candles here, that would be an order block.

220

I could look to take an entry in here, my stop on this low, and looking for 2R.

221

And as we let this play out, you can see we get a continuation higher.

222

And what else happens?

223

With this closure on this higher time frame, I'd be looking for a continuation in this area here in candle 4.

224

You can see now that we have closed over those down close candles there, I'd anticipate this low to hold if we are going to trade higher.

225

we finally hit that TP there.

226

So you can see

227

that is what I wanted to show was there's a lot of different things

228

that you can do with this indicator in terms of a confluence

229

or overlapping but you can see how this hourly t-spot was then overlapped with the five minute t-spot

230

and if I really wanted to I could go to the lower time frames in there.

231

For our last example here you can see we are on ES on the daily

232

and hourly chart as we let this daily candle close let's see what happens.

233

You can see our daily candle has closed inside the previous day high as shown here and here.

234

We have a candle to closure with a change in the state of delivery.

235

Here are the projections from the reversal.

236

Now if price is going to continue lower, I'd like to see price hold or not close over this t-spot area here.

237

So as we let this continue to play out, you can see as we enter the New York session, we have just consolidated.

238

So with a consolidation, I'd like to see a manipulation before we get expansion.

239

Here you can see we manipulate this side of the range.

240

So where would I like to see price reach for?

241

Well, ideally using the formation liquidity or the previous day's low over here, which is marked out and in line with the projections, I'd like to see price expand to these lows.

242

You can see price then expands to those lows and hits the targets.

243

And that will conclude the video with the introduction to my fractal model as well as showcasing my indicator.

244

If there is anything that I missed within this video in regards to settings or the indicator, feel free to leave a comment in the comment section below and I'll get those answered.

245

But with that, I hope you have a great rest of your day and I'll see you guys next time.

Phương Pháp Shadowing Là Gì?

Shadowing là kỹ thuật học ngôn ngữ có cơ sở khoa học, ban đầu được phát triển cho chương trình đào tạo phiên dịch viên chuyên nghiệp và được phổ biến rộng rãi bởi nhà đa ngôn ngữ học Dr. Alexander Arguelles. Nguyên lý cốt lõi đơn giản nhưng cực kỳ hiệu quả: bạn nghe tiếng Anh của người bản xứ và lặp lại to ngay lập tức — như một "cái bóng" (shadow) đuổi theo người nói với độ trễ chỉ 1–2 giây. Khác với luyện ngữ pháp hay học từ vựng bị động, Shadowing buộc não bộ và cơ miệng phải đồng thời xử lý và tái tạo ngôn ngữ thực tế. Các nghiên cứu khoa học xác nhận phương pháp này cải thiện đáng kể phát âm, ngữ điệu, nhịp điệu, nối âm, kỹ năng nghe và độ lưu loát khi nói — đặc biệt hiệu quả cho người luyện IELTS Speaking và muốn giao tiếp tiếng Anh tự nhiên như người bản ngữ.

Luyện nói tiếng Anh bằng Shadowing qua video: Intro To TTrades Fractal Model [Indicator & Settings]

Ấn Tượng Đầu Tiên

Phân Tích Câu Nói

Lịch Tập Luyện

Phương Pháp Shadowing Là Gì?