跟讀練習: How to Make Anything - Learn to Think Like an Engineer - 通過影片學習英語口語

選擇練習模式

每種模式都會開啟全屏練習室。

124 句

如果句子過短或過長，請點選 Edit 進行調整。

Most people treat starter kits like toys,

then they don't know how to start their first real project because they never learned how to build systems.

In this video, I'm going to show you the mindset shift

that you need to turn a $20 starter kit into a real engineering experience.

This is how the pros do it,

and if you start now, so can you.

Hello and welcome to Fluxbench.

My name's James and I'm a nerd and I hope you're a nerd too.

okay so here's the problem you get your kit you follow the tutorial you plug in your light

and wire it up exactly like they tell you to you run the code

that they give you and it blinks wonderful

and then you go on to the next lesson and another part

but what did you actually learn by doing that like

if i took away those instructions do you think you could honestly use

that part in something else you're not learning electronics you're following recipes

and that's copying and it's fine to get started but you're not going to get far past blinking lights doing that.

What matters is connecting all these ideas together.

Why does the LED actually work?

What else could the LED respond to?

What else could you swap in instead of using an LED?

Here's how I look at it.

Those lessons are giving you one tool at a time where you have things like buttons

and sensors and those are just inputs and then you have your microcontroller in the middle

and then you have LEDs and screens and stuff like that that are outputs.

And what you need to do is chain the inputs to the outputs somehow.

You need to build a system that links them all together.

And that's where the real engineering is.

If you begin thinking like this,

then that $20 starter kit of yours,

it's no longer a toy.

It's a freaking laboratory to do whatever the heck you want

with it it's your R&D laboratory you have all the tools

all the sensors the buttons whatever you need to make what you want it should be in there

so now we get to the fun cheesy part of it's

not what you know it's how you think about it it's the real difference between a beginner

and a builder is

that a beginner looks at a starter kit as a bunch of individual demos

that are separate and a builder looks at them as a bunch of individual tools

that they're going to go link together in a system

and they're just learning one at a time and

so you got to have

that mindset shift of it's not demos it's systems i want

to show you the engineering ladder of mine it's got five rungs on it

and in the beginning you start out with tutorials

and in the end you're able to build whatever the heck you want this is the blinky stage where you follow tutorials,

you plug in sensors, you just get results.

But it's not the destination.

Think of this as just learning individual words of a vocabulary.

The magic really begins once you start to integrate these separate things.

Once you start to combine a button with an LED or some sort of sensor with like a speaker,

all of a sudden you're taking these individual tools and combining them into a system.

It's like if you took these individual vocabulary words,

started putting them together and they're starting to make like a fluid sentence.

Now you're really starting to speak like a real engineer.

Music isn't just one note,

it's a arrangement of many.

And it's the same thing with electronics and when you start to combine and integrate them,

this is where that real electron jazz begins.

I love modules, they're a great way to get started in electronics.

You can just go and buy a kit of them for real cheap and they just work.

But the problem is once you need a lot of them.

This here is a infrared transmitter.

It's probably a dollar or two dollars a piece

but the problem is it's probably five or ten cents a piece for the actual parts.

And then this thing here is a photoelectric light measuring module,

but all these parts here are probably one penny a piece.

They're just resistors, to be honest.

And this bag of buttons,

if you buy a button module,

oh my goodness, well, you might need it,

but it's just like a penny or two per button.

So all these are great,

but those $5 modules are probably just like 75 cents in parts.

If you use enough of them,

it's kind of like trying to water a tree with bottled water.

You can definitely do it.

It's just a really expensive way to go about doing it.

Flip your board, read the chip,

look up the part, own your circuit.

So the real playground isn't in your 37-in-1 sensor kit or your modules.

It's in the catalog.

Check this out.

A whole box or bag full of different microcontrollers.

So you can take your ESP32

and I can basically swap out any size of memory I want

so I can get a $3 microcontroller or a $5 microcontroller depending on how much money I want to put into it.

I can add all sorts of sensors.

I can customize it however I want and that's what you get when you start working with a catalog compared to modules.

Start browsing distributors like Mauser,

DigiKey, L-C-S-C And you don't just search You really try to discover

You sometimes find the part that just does exactly what you need,

and other times you find a part so cool you end up changing your whole project around it.

The real superpower is debugging,

fixing, and just not panicking while you do it.

Because by now, you don't expect things to work on the first try,

and when something else breaks,

you're used to it, and you just start hunting it down because you're ready for it and you know where to look.

At this point, you're not copying anymore.

You're building.

100

You're solving.

101

And if you actually manage to get here, you're dangerous.

102

Most people don't get past level one.

103

But the thing is, if you're feeling the itch to do something real,

104

then this is your ladder.

105

Climb it.

106

I'm serious.

107

By the time you get to the top,

108

you will be dangerous because you're not going to need anyone else's help.

109

Whatever the thing is that you want to do,

110

you're going to know how to do it.

111

You got to learn, integrate,

112

replace, explore, and most of all, you got to persevere.

113

If you don't know where to begin,

114

then my previous video talks about how to actually get electronics,

115

what to buy, where, how much,

116

just get a starter kit.

117

Any of them will do.

118

And in the next video,

119

we're going to start doing something crazy.

120

I'm going to start a series where we're actually going take

121

some of these first few lessons of any of these starter kits

122

and we're gonna go all the way from idea all the way to income making a real product.

123

This is something that you guys can do as well so follow along it's gonna get crazy.

124

But for now whatever it is go out there make something awesome you got this.

下載應用

流利口語所需的一切

AI 發音評分逐句打分

音標練習掌握每個音

詞彙學習建立你的詞庫

詞彙遊戲邊玩邊學

掃碼

Download on theApp Store Get it onGoogle Play

FOR YOU

什麼是跟讀法？

跟讀法 (Shadowing) 是一種有科學依據的語言學習技巧，最初開發用於專業口譯員的培訓，並由多語言者Alexander Arguelles博士普及。這個方法簡單而強大：您在聽英語母語原聲的同時立即大聲重複——就像是一個延遲1-2秒緊跟說話者的影子。與被動聽力或語法練習不同，跟讀法強迫您的大腦和口腔肌肉同時處理並模模擬實的講話模式。研究表明它能顯著提高發音準確性，語調，節奏，連讀，聽力理解和口語流利度——使其成為雅思口語備考和真實英語交流最有效的方法之一。

影子跟讀法: 閱讀完整分步指南 →

跟讀練習: How to Make Anything - Learn to Think Like an Engineer - 通過影片學習英語口語

選擇練習模式

下載應用

推薦影片

What is Engineering?: Crash Course Engineering #1

10 life lessons (for a healthy mind + body) ✨

Should You Build Your Own Keyboard?

A Return to Code

I Made an EMP Device... It Actually Works

Design Thinking 101

Learn Anything So Fast That People Think You're A Genius

How to Become a Great Software Developer — Best Advice from Top-Notch Engineers

Business Partner C1. Unit 1. Video 1.1.1.

Making Things Again | practice English with Spotlight

9 Mental Models You Can Use to Think Like a Genius

How to Be Truly Creative

背景與上下文

日常交流十大短語

逐步影子跟讀指南

什麼是跟讀法？