تدريب Shadowing: Ohms Law Explained - The basics circuit theory - تعلم التحدث بالإنجليزية عبر الفيديو
اختر وضع التدريب
كل وضع يفتح غرفة تدريب بملء الشاشة.
129 جمل
إذا كانت الجمل قصيرة أو طويلة جدًا، انقر على Edit لتعديلها.
1
Hey there guys, Paul here from theengineeringmindset .com.
2
In this video we're going to be looking at Ohm's Law
3
to understand how it works as well as how to use it.
4
There are also two problems at the end of this video for you to test your knowledge
5
and see if you can solve.
6
So what is Ohm's Law?
7
Ohm's Law is the relationship between voltage, current and resistance and how they relate to each other.
8
Ohm's law was developed by a German physicist named George Ohm
9
who undertook many experiments to develop his theory including measuring current by touching live electrical circuits to see how much it hurt.
10
As you might imagine the higher the current the more it hurt.
11
Now there are three formulas we need to use for Ohm's law
12
but we don't actually need to remember these and I'll show you a super easy tip in just a moment.
13
So the three formulas we use for Ohm's law are voltage equals current multiplied by resistance, current equals voltage divided by resistance,
14
and resistance equals voltage divided by current.
15
If that seems like a lot to remember then don't worry because we don't need to remember them.
16
All we need to remember is Ohm's triangle which looks like this.
17
So you just need to remember these three letters in order V, I, R.
18
Then we just write those letters in a triangle with V at the top
19
and we draw a line to separate the letters.
20
In fact you don't even need to remember those
21
because I've made a free PDF guide for you with some worked examples
22
which you can keep on your PC or your mobile and access wherever you need.
23
Links for that can be found in the video description down below.
24
Now all we do when we need to use a formula is cover up the letter we need.
25
So if we want to find the voltage then we write V equals
26
and then we cover up the V in the triangle.
27
That leaves us with I and R so we write I multiplied by which means voltage equals current multiplied by resistance.
28
You can write a little multiplication symbol in the triangle between the two letters if it helps you.
29
Now I know what you're thinking, why is current represented with the letter I and not a C for current,
30
or even a letter A for the unit of ampere?
31
Well the unit of current is the ampere or the amp, and this is named after André Ampere, a French physicist.
32
A couple of hundred years ago he undertook lots of experiments many involved varying the amount of electrical current.
33
So he called this intensity du current or the intensity of current.
34
So when he published his work they took the letter I and it became standard until this day.
35
Now you might also come across formulas where the letter E is used instead of V.
36
The letter E stands for EMF or electromotive force
37
but don't worry about that just stick to using V
38
and substitute V for E if you see it used in Ohm's law questions.
39
Anyway so by covering V we get voltage equals current multiplied by resistance.
40
If we want to find current then we write down I equals
41
and then we cover up the letter I in the triangle.
42
That gives us V and R
43
so as V is above the R like a fraction
44
we can write V divided by R therefore current is equal to voltage divided by resistance.
45
If we want to find resistance then we write down R equals and we cover up R in the triangle.
46
That leaves us with V and I so we write V divided by I
47
which gives us resistance equals voltage divided by current.
48
Let's look at some examples for how to use these formulas.
49
First let's see how we find voltage and how it relates to the other parts.
50
Let's say we have a simple electrical circuit with a battery and a resistor.
51
We don't know what the voltage of the battery is though.
52
The resistor is three ohms and when we connect a multimeter into the circuit, we see that we get a reading of two amps of current.
53
We want to find the voltage, so using ohms triangle, we can cover up the V and that gives us V equals I multiplied by R.
54
We know the current is two amps, so we can write that in, and we know the resistance is three ohms,
55
so we can write that in also.
56
Therefore, two amps multiplied by three ohms gives us six volts.
57
The battery is therefore 6 volts.
58
Now if you want to check your answers for ohms questions then I've built a free calculator on the website.
59
You can just drop your numbers in and it will do the calculation for you.
60
Links for that again in the video description down below.
61
Coming back to the circuit, if we now double the voltage by connecting two 6 volt batteries in series we get 12 volts.
62
If we now connect this to the same circuit the current also doubles from 2 amps to 4 amps.
63
If we double the voltage again to 24 volts, the current will also double to 8 amps.
64
So what's the relationship here?
65
We can see that current is therefore directly proportional to voltage.
66
If we double the voltage, we double the current.
67
Remember voltage is like pressure, is the pushing force in the circuit.
68
It pushes the electrons around the wires
69
and we place things like lamps in the way of these electrons
70
so that they have to flow through these and that causes the lamp to light up.
71
By doubling the voltage we see that the current also doubles,
72
meaning that more electrons are flowing and this occurs as we apply more pressure or more voltage.
73
This is just like if we were to use a bigger water pump then more water will flow.
74
Okay, so what about finding current?
75
Let's say we now have a 3 ohm lamp connected to a 6 volt power supply.
76
To find the current we write down I equals and then we cover up I in the triangle.
77
That gives us V divided by R, so current equals voltage divided by resistance.
78
We know the voltage is 6 volts and the resistance is 3 ohms, so the current is therefore 2 amps.
79
And that's what we see on the multimeter.
80
By the way, if you don't have a multimeter then I highly recommend you get one.
81
It's essential for troubleshooting but also building your essential electrical knowledge.
82
I'll leave some links down below for which one to get and from where.
83
So we saw what happens when we use a resistance of 3 ohms in the circuit.
84
But if we double the resistance to 6 ohms by placing another 3 ohm lamp into the circuit, the current halves to just 1 amp.
85
If we double the resistance again to 12 ohms, the current will half again to 0 .5 amps.
86
We can visually see this because the lamps will become less bright as the current reduces from the increase in resistance.
87
So what's the relationship here?
88
We can see that the current is inversely proportional to the resistance.
89
When we double the resistance the current will decrease by half.
90
If we half the resistance the current will double.
91
Current is the flow of electrons or the flow of free electrons.
92
For us to make this lamp shine we need to push electrons through it.
93
How do we do that?
94
We apply a voltage across the two ends.
95
The voltage will push the electrons.
96
The atoms inside the copper wire have free electrons in their valence shell
97
which means they can very easily move to other copper atoms.
98
They will naturally move to other atoms by themselves
99
but this will be in random directions which is of no use to us.
100
For the lamp to turn on we need lots of electrons to flow in the same direction.
101
When we connect to voltage source
102
we use the pressure of the battery to push the electrons through the circuit all in the same direction.
103
For example to power this 1 .5 ohm resistive lamp with a 1 .5 volt battery requires 1 amp of current.
104
This is equal to 6 ,242 ,000 ,000 electrons passing from the battery
105
and through the lamp every second and if we can achieve this then the lamp will stay at full brightness.
106
If the voltage or current reduces or the resistance of the circuit increases then the lamp will become dimmer.
107
Okay now let's look at finding resistance.
108
Say we have a resistive lamp connected to a 12 volt power supply.
109
We don't know how much resistance is adding to the circuit but we measure the current at 0 .5 amps.
110
To find the resistance we write down R equals and and then we cover up the R in the triangle.
111
We're left with V and I, so resistance equals voltage divided by current.
112
We know the voltage is 12 volts and the current is 0 .5 amps, so 12 divided by 0 .5 gives us 24 ohms of resistance.
113
Resistance is the opposition to the flow of electrons.
114
It tries to prevent electrons from flowing.
115
That's why we use resistors in circuits to reduce the current and protect components such as an LED.
116
If we try to connect an LED directly to a 9V battery, it will blow out because the voltage and the current are too high.
117
But when we add a resistor into the circuit, then these are reduced, so the LED is protected and will shine brightly.
118
So given the circuit, we can increase the current by increasing the voltage, or we can also increase the current by reducing the resistance.
119
We can also reduce the current by increasing the resistance.
120
Okay, time for you to test your skills.
121
Can you solve these problems?
122
I'll leave a link for the answer and the solution in the video description down below.
123
Problem one, let's say we have this lamp which has a resistance of 240 ohms.
124
If we plug this into an outlet in the US which uses 120 volts, what will the current be?
125
Problem two, if I plug the same 240 ohm resistive lamp into an outlet in the UK, we get a current of 0 .958 amps.
126
So what is the voltage being applied here?
127
Okay guys, that's it for this video, but to continue your learning,
128
then check out one of the videos on screen now and I'll catch you there for the next lesson.
129
Don't forget to follow us on Facebook, Twitter, Instagram, LinkedIn, as well as theengineeringmindset .com.
تنزيل التطبيق
كل ما تحتاجه للتحدث بطلاقة
تقييم النطق بالذكاء الاصطناعيتقييم كل جملة
تدريب IPAأتقن كل صوت
المفرداتابنِ رصيدك من الكلمات
لعبة المفرداتتعلّم أثناء اللعب
نفس القناة
C11
Diodes Explained - The basics how diodes work working principle pn junction
Daily ConversationUniversity StudentsWorking Adults
B21
Air Conditioning System Basics hvacr how does it work
Daily ConversationWorking Adults
B22
How ELECTRICITY works - working principle
Daily ConversationUniversity StudentsWorking Adults
C1Centrifugal Pump Basics - How centrifugal pumps work working principle hvacr
Daily ConversationWorking Adults
FOR YOU
فيديو موصى به
B21
29 جمل
OHM's Law in 3 minutes (Beginner friendly)
Daily ConversationUniversity Students
B21
72 جمل
Fight brain-rot with Worked Examples
Daily ConversationUniversity StudentsWorking Adults
B21
183 جمل
Concept of Electric Current with Train example | TheElectricalGuy
Daily ConversationUniversity Students
B21
378 جمل
Teaching Myself Electronics (Part One)
Daily ConversationUniversity Students
B2158 جمل
7 Cấp Độ Toán Học: Bạn Đang Ở Đâu?
Daily ConversationUniversity Students
B21
162 جمل
Introduction to PLC | Siemens PLC Training Course
Daily ConversationUniversity Students
C13
279 جمل
LET THERE BE... Voltage? | Maxwell's Equation #2 Explained for Beginners
Daily ConversationUniversity Students
B21
425 جمل
NEW- Micro Unit 1 Summary- Basic Economic Concepts
Daily ConversationHigh School StudentsUniversity Students
B22
38 جمل
Internet of Things (IoT) Explained in 3 minutes
Daily ConversationUniversity StudentsWorking Adults
B13
9 جمل
Walter Lewin explains Newton's third law
Daily ConversationHigh School StudentsUniversity Students
C11
166 جمل
Introduction to Optoelectronics and Photonics
Daily ConversationUniversity Students
المفردات وملاحظات التحدث لهذا الدرس
هذا الدرس في المحادثة مبني على الفيديو “Ohms Law Explained - The basics circuit theory”. أكثر الكلمات تكرارًا في الفيديو: current, voltage, resistance, Amp, lamp. يحتوي هذا الفيديو على 108 جملة و1796 كلمة للتدرب على الترديد. مدة الكلام 9:49. يتكلم المتحدث بسرعة، نحو 183 كلمة في الدقيقة، لذا ستسمع كثيرًا من وصل الكلمات واختزال الأصوات. 80% فقط من الكلمات ضمن أكثر 3,000 كلمة شيوعًا في الإنجليزية، فالمفردات صعبة نسبيًا.
أهم المفردات في هذا الفيديو
15 كلمة من الفيديو تستحق التعلّم، مع النطق والمعنى:
| الكلمة | النطق | المعنى |
|---|---|---|
| voltage اسم | /ˈvəʊltɪd͡ʒ/ | جُهْد, فُولْتِيَّة |
| lamp اسم | /ˈlæ̝mp/ | مِصْبَاح, لَمْبَة |
| divide فعل | /dɪˈvaɪd/ | قَسَّمَ |
| triangle اسم | /ˈtɹaɪˌæŋɡəl/ | مُثَلَّث |
| connect فعل | /kəˈnɛkt/ | رَبَطَ |
| formula اسم | /ˈfɔː.mjʊ.lə/ | صِيغَة |
| metre اسم | /ˈmiːtəɹ/ | مِتْر |
| atom اسم | /ˈætəm/ | ذَرَّة |
| wire اسم | /ˈwaɪɚ/ | سِلْك |
| solve فعل | /sɒlv/ | ذَابَ, حَلَّ |
| experiment اسم | /ɪkˈspɛɹ.ə.mənt/ | تَجْرِبَة, اِخْتِبَار |
| copper اسم | /ˈkɒpə/ | نُحَاس, نحاس |
| leaf اسم | /lif/ | وَرَقَة, وَرَقة |
| shine فعل | /ʃaɪn/ | لَمَعَ, وَمَضَ |
| plug اسم | /plʌɡ/ | قَابِس, فِيشَة |
القواعد في هذا الفيديو
أكثر التراكيب التي يستخدمها المتحدث، مع العبارات نفسها من الفيديو:
| التركيب | في الفيديو |
|---|---|
| المبني للمجهول be + اسم المفعول — التركيز على ما يحدث لا على من يفعله | was developed · can be found · is named |
| المضارع التام have/has + اسم المفعول — حدث ماضٍ ما زال له أثر الآن | I've made · I've built |
| جمل الوصل who / which + جملة — معلومة إضافية عن شخص أو شيء | directions which is · lamp which has |
نطق يحتاج إلى انتباه
يستخدم المتحدث 16 من الصيغ المختصرة، مثل don't, I'll, I've. انطقها بصيغتها القصيرة كما تسمعها.
- أصوات “sh” و“zh”: shine /ʃaɪn/, shell /ʃɛl/, fraction /ˈfɹæk.ʃən/, calculation /ˌkælkjuˈleɪʃn̩/, multiplication /ˌmʌltɪplɪˈkeɪʃən/
- الكلمات الطويلة — انتبه لموضع النبر: electrical /ɪˈlɛktɹɪkəl/, experiment /ɪkˈspɛɹ.ə.mənt/, naturally /ˈnæt͡ʃ.(ə.)ɹə.li/, intensity /ɪnˈtɛnsɪti/, visually /ˈvɪzju.əli/
أصوات يجدها متحدثو العربية صعبة:
- /p/ — ليس /b/: انطقه مع نفخة هواء: lamp /ˈlæ̝mp/, experiment /ɪkˈspɛɹ.ə.mənt/, copper /ˈkɒpə/, plug /plʌɡ/, component /kəmˈpoʊ.nənt/
- /v/ — ليس /f/: مع اهتزاز الأوتار الصوتية: voltage /ˈvəʊltɪd͡ʒ/, divide /dɪˈvaɪd/, solve /sɒlv/, wherever /(h)wɛɹˈɛvɚ/, vary /ˈvɛəɹi/
- تتابع الصوامت — لا تضف حركة بينها: lamp /ˈlæ̝mp/, triangle /ˈtɹaɪˌæŋɡəl/, connect /kəˈnɛkt/, electrical /ɪˈlɛktɹɪkəl/, solve /sɒlv/
كيف تتدرب بهذا الفيديو
- استمع إلى الفيديو كاملًا مرة واحدة دون أن تتكلم، ودوّن الكلمات التي لا تعرفها.
- ابدأ بسرعة 0.75×، وردّد جملة جملة، ثم عُد إلى السرعة العادية عندما يصبح الأمر سهلًا.
- سجّل صوتك وقارنه بالأصل، مع الانتباه إلى كلمات مثل voltage, lamp, divide.
ما هي تقنية التظليل الصوتي؟
التظليل الصوتي (Shadowing) تقنية تعلم لغة مدعومة علمياً، طُورت أصلاً لتدريب المترجمين الفوريين المحترفين. الطريقة بسيطة لكنها قوية: تستمع لصوت إنجليزي أصلي وتكرره فوراً بصوت عالٍ — كظل يتبع المتحدث بتأخير 1-2 ثانية. تُظهر الأبحاث تحسناً كبيراً في دقة النطق والتنغيم والإيقاع وربط الأصوات والاستماع والطلاقة.