Shadowing Practice: Ohms Law Explained - The basics circuit theory - Learn English Speaking with Video

Bir pratik modu seçin

Her mod tam ekran bir pratik odası açar.

129 cümleler
Cümleler çok kısa veya çok uzun ise, ayarlamak için Düzenle'ye tıklayın.
1
Hey there guys, Paul here from theengineeringmindset .com.
2
In this video we're going to be looking at Ohm's Law
3
to understand how it works as well as how to use it.
4
There are also two problems at the end of this video for you to test your knowledge
5
and see if you can solve.
6
So what is Ohm's Law?
7
Ohm's Law is the relationship between voltage, current and resistance and how they relate to each other.
8
Ohm's law was developed by a German physicist named George Ohm
9
who undertook many experiments to develop his theory including measuring current by touching live electrical circuits to see how much it hurt.
10
As you might imagine the higher the current the more it hurt.
11
Now there are three formulas we need to use for Ohm's law
12
but we don't actually need to remember these and I'll show you a super easy tip in just a moment.
13
So the three formulas we use for Ohm's law are voltage equals current multiplied by resistance, current equals voltage divided by resistance,
14
and resistance equals voltage divided by current.
15
If that seems like a lot to remember then don't worry because we don't need to remember them.
16
All we need to remember is Ohm's triangle which looks like this.
17
So you just need to remember these three letters in order V, I, R.
18
Then we just write those letters in a triangle with V at the top
19
and we draw a line to separate the letters.
20
In fact you don't even need to remember those
21
because I've made a free PDF guide for you with some worked examples
22
which you can keep on your PC or your mobile and access wherever you need.
23
Links for that can be found in the video description down below.
24
Now all we do when we need to use a formula is cover up the letter we need.
25
So if we want to find the voltage then we write V equals
26
and then we cover up the V in the triangle.
27
That leaves us with I and R so we write I multiplied by which means voltage equals current multiplied by resistance.
28
You can write a little multiplication symbol in the triangle between the two letters if it helps you.
29
Now I know what you're thinking, why is current represented with the letter I and not a C for current,
30
or even a letter A for the unit of ampere?
31
Well the unit of current is the ampere or the amp, and this is named after André Ampere, a French physicist.
32
A couple of hundred years ago he undertook lots of experiments many involved varying the amount of electrical current.
33
So he called this intensity du current or the intensity of current.
34
So when he published his work they took the letter I and it became standard until this day.
35
Now you might also come across formulas where the letter E is used instead of V.
36
The letter E stands for EMF or electromotive force
37
but don't worry about that just stick to using V
38
and substitute V for E if you see it used in Ohm's law questions.
39
Anyway so by covering V we get voltage equals current multiplied by resistance.
40
If we want to find current then we write down I equals
41
and then we cover up the letter I in the triangle.
42
That gives us V and R
43
so as V is above the R like a fraction
44
we can write V divided by R therefore current is equal to voltage divided by resistance.
45
If we want to find resistance then we write down R equals and we cover up R in the triangle.
46
That leaves us with V and I so we write V divided by I
47
which gives us resistance equals voltage divided by current.
48
Let's look at some examples for how to use these formulas.
49
First let's see how we find voltage and how it relates to the other parts.
50
Let's say we have a simple electrical circuit with a battery and a resistor.
51
We don't know what the voltage of the battery is though.
52
The resistor is three ohms and when we connect a multimeter into the circuit, we see that we get a reading of two amps of current.
53
We want to find the voltage, so using ohms triangle, we can cover up the V and that gives us V equals I multiplied by R.
54
We know the current is two amps, so we can write that in, and we know the resistance is three ohms,
55
so we can write that in also.
56
Therefore, two amps multiplied by three ohms gives us six volts.
57
The battery is therefore 6 volts.
58
Now if you want to check your answers for ohms questions then I've built a free calculator on the website.
59
You can just drop your numbers in and it will do the calculation for you.
60
Links for that again in the video description down below.
61
Coming back to the circuit, if we now double the voltage by connecting two 6 volt batteries in series we get 12 volts.
62
If we now connect this to the same circuit the current also doubles from 2 amps to 4 amps.
63
If we double the voltage again to 24 volts, the current will also double to 8 amps.
64
So what's the relationship here?
65
We can see that current is therefore directly proportional to voltage.
66
If we double the voltage, we double the current.
67
Remember voltage is like pressure, is the pushing force in the circuit.
68
It pushes the electrons around the wires
69
and we place things like lamps in the way of these electrons
70
so that they have to flow through these and that causes the lamp to light up.
71
By doubling the voltage we see that the current also doubles,
72
meaning that more electrons are flowing and this occurs as we apply more pressure or more voltage.
73
This is just like if we were to use a bigger water pump then more water will flow.
74
Okay, so what about finding current?
75
Let's say we now have a 3 ohm lamp connected to a 6 volt power supply.
76
To find the current we write down I equals and then we cover up I in the triangle.
77
That gives us V divided by R, so current equals voltage divided by resistance.
78
We know the voltage is 6 volts and the resistance is 3 ohms, so the current is therefore 2 amps.
79
And that's what we see on the multimeter.
80
By the way, if you don't have a multimeter then I highly recommend you get one.
81
It's essential for troubleshooting but also building your essential electrical knowledge.
82
I'll leave some links down below for which one to get and from where.
83
So we saw what happens when we use a resistance of 3 ohms in the circuit.
84
But if we double the resistance to 6 ohms by placing another 3 ohm lamp into the circuit, the current halves to just 1 amp.
85
If we double the resistance again to 12 ohms, the current will half again to 0 .5 amps.
86
We can visually see this because the lamps will become less bright as the current reduces from the increase in resistance.
87
So what's the relationship here?
88
We can see that the current is inversely proportional to the resistance.
89
When we double the resistance the current will decrease by half.
90
If we half the resistance the current will double.
91
Current is the flow of electrons or the flow of free electrons.
92
For us to make this lamp shine we need to push electrons through it.
93
How do we do that?
94
We apply a voltage across the two ends.
95
The voltage will push the electrons.
96
The atoms inside the copper wire have free electrons in their valence shell
97
which means they can very easily move to other copper atoms.
98
They will naturally move to other atoms by themselves
99
but this will be in random directions which is of no use to us.
100
For the lamp to turn on we need lots of electrons to flow in the same direction.
101
When we connect to voltage source
102
we use the pressure of the battery to push the electrons through the circuit all in the same direction.
103
For example to power this 1 .5 ohm resistive lamp with a 1 .5 volt battery requires 1 amp of current.
104
This is equal to 6 ,242 ,000 ,000 electrons passing from the battery
105
and through the lamp every second and if we can achieve this then the lamp will stay at full brightness.
106
If the voltage or current reduces or the resistance of the circuit increases then the lamp will become dimmer.
107
Okay now let's look at finding resistance.
108
Say we have a resistive lamp connected to a 12 volt power supply.
109
We don't know how much resistance is adding to the circuit but we measure the current at 0 .5 amps.
110
To find the resistance we write down R equals and and then we cover up the R in the triangle.
111
We're left with V and I, so resistance equals voltage divided by current.
112
We know the voltage is 12 volts and the current is 0 .5 amps, so 12 divided by 0 .5 gives us 24 ohms of resistance.
113
Resistance is the opposition to the flow of electrons.
114
It tries to prevent electrons from flowing.
115
That's why we use resistors in circuits to reduce the current and protect components such as an LED.
116
If we try to connect an LED directly to a 9V battery, it will blow out because the voltage and the current are too high.
117
But when we add a resistor into the circuit, then these are reduced, so the LED is protected and will shine brightly.
118
So given the circuit, we can increase the current by increasing the voltage, or we can also increase the current by reducing the resistance.
119
We can also reduce the current by increasing the resistance.
120
Okay, time for you to test your skills.
121
Can you solve these problems?
122
I'll leave a link for the answer and the solution in the video description down below.
123
Problem one, let's say we have this lamp which has a resistance of 240 ohms.
124
If we plug this into an outlet in the US which uses 120 volts, what will the current be?
125
Problem two, if I plug the same 240 ohm resistive lamp into an outlet in the UK, we get a current of 0 .958 amps.
126
So what is the voltage being applied here?
127
Okay guys, that's it for this video, but to continue your learning,
128
then check out one of the videos on screen now and I'll catch you there for the next lesson.
129
Don't forget to follow us on Facebook, Twitter, Instagram, LinkedIn, as well as theengineeringmindset .com.

Uygulamayı İndir

Akıcı konuşmak için ihtiyacınız olan her şey

AI TelaffuzHer cümleyi puanla
IPA AlıştırmasıHer sesi ustalaştır
Kelime BilgisiKelime bankanızı oluşturun
Kelime OyunuOynarken öğrenin

Aynı Kanal

FOR YOU

Video Öner

Bu dersin kelimeleri ve konuşma notları

Bu konuşma dersi “Ohms Law Explained - The basics circuit theory” videosuna dayanıyor. En çok tekrarlanan kelimeler: current, voltage, resistance, Amp, lamp. Bu videoda gölgeleme çalışması için 108 cümle ve 1796 kelime var. Konuşma bölümü 9:49 sürüyor. Konuşmacı hızlı konuşuyor, dakikada yaklaşık 183 kelime; bu yüzden birbirine bağlanan ve zayıflayan sesler duyacaksınız. Kelimelerin yalnızca %80’i İngilizcede en sık kullanılan 3.000 kelime arasında, bu yüzden kelime dağarcığı zorlayıcı.

Bu videodaki önemli kelimeler

Videodan öğrenmeye değer 15 kelime, telaffuzu ve anlamıyla:

KelimeTelaffuzAnlam
voltage isim/ˈvəʊltɪd͡ʒ/gerilim
lamp isim/ˈlæ̝mp/lamba, ampul
triangle isim/ˈtɹaɪˌæŋɡəl/üçgen, üçbucak
litter isim/ˈlɪt.ɚ/altlık
formula isim/ˈfɔː.mjʊ.lə/formül
metre isim/ˈmiːtəɹ/metre
atom isim/ˈætəm/atom
wire isim/ˈwaɪɚ/tel
solve fiil/sɒlv/çözmek, halletmek
experiment isim/ɪkˈspɛɹ.ə.mənt/deney (n), tecrübe
copper isim/ˈkɒpə/bakır
leaf isim/lif/yaprak
shine fiil/ʃaɪn/parlamak
plug isim/plʌɡ/fiş
undertake fiil/ˌʌndəˈteɪk/girişmek

Duyacağınız deyimsel fiiller

KelimeAnlam
check out fiilgözden geçirmek
come across fiilkarşıdan karşıya geçmek
light up fiilaydınlatmak

Bu videodaki dil bilgisi

Konuşmacının en çok kullandığı yapılar, videodaki sözcüklerin aynısıyla:

YapıVideoda
Edilgen yapı be + fiilin üçüncü hâli — kimin yaptığı değil, ne olduğu önemliwas developed · can be found · is named
Present perfect have/has + fiilin üçüncü hâli — geçmişte olan ama şimdi de önemli olan bir eylemI've made · I've built
İlgi cümlecikleri who / which + cümle — bir kişi ya da şey hakkında ek bilgidirections which is · lamp which has

Dikkat edilecek telaffuzlar

Konuşmacı don't, I'll, I've gibi kısaltılmış biçimleri 16 kez kullanıyor. Bunları duyduğunuz gibi kısa söyleyin.

  • “sh” ve “zh” sesleri: shine /ʃaɪn/, shell /ʃɛl/, fraction /ˈfɹæk.ʃən/, calculation /ˌkælkjuˈleɪʃn̩/, multiplication /ˌmʌltɪplɪˈkeɪʃən/
  • Uzun kelimeler — vurguyu doğru yere koyun: electrical /ɪˈlɛktɹɪkəl/, experiment /ɪkˈspɛɹ.ə.mənt/, naturally /ˈnæt͡ʃ.(ə.)ɹə.li/, intensity /ɪnˈtɛnsɪti/, visually /ˈvɪzju.əli/

Türkçe konuşanların zorlandığı sesler:

  • /w/ — dudaklar yuvarlak, /v/ değil: wire /ˈwaɪɚ/, wherever /(h)wɛɹˈɛvɚ/
  • Kelime başındaki ünsüz kümesi — araya ünlü eklemeyin: triangle /ˈtɹaɪˌæŋɡəl/, plug /plʌɡ/, skill /skɪl/, wherever /(h)wɛɹˈɛvɚ/, fraction /ˈfɹæk.ʃən/
  • /æ/ — “e”den daha açık: lamp /ˈlæ̝mp/, triangle /ˈtɹaɪˌæŋɡəl/, atom /ˈætəm/, naturally /ˈnæt͡ʃ.(ə.)ɹə.li/, fraction /ˈfɹæk.ʃən/

Bu videoyla nasıl çalışılır

  1. Videonun tamamını konuşmadan bir kez dinleyin ve bilmediğiniz kelimeleri not edin.
  2. 0,75× hızla başlayın, cümle cümle tekrar edin ve kolaylaşınca normal hıza dönün.
  3. Kendinizi kaydedin ve orijinaliyle karşılaştırın; voltage, lamp, triangle gibi kelimelere özellikle dikkat edin.

Gölgeleme Tekniği Nedir?

Gölgeleme, başlangıçta profesyonel tercüman eğitimi için geliştirilen ve çok dilli Dr. Alexander Arguelles tarafından popüler hale getirilen, bilim destekli bir dil öğrenme tekniğidir. Yöntem basit ama güçlüdür: ana dili İngilizce olan bir sesi dinler ve hemen yüksek sesle tekrar edersiniz — konuşmacıyı 1-2 saniye gecikmeyle takip eden bir gölge gibi. Pasif dinleme veya dilbilgisi alıştırmalarının aksine, gölgeleme beyninizi ve ağız kaslarınızı gerçek konuşma kalıplarını eşzamanlı olarak işlemeye ve yeniden üretmeye zorlar. Araştırmalar, telaffuz doğruluğu, tonlama, ritim, bağlı konuşma, dinleme anlama ve konuşma akıcılığını önemli ölçüde geliştirdiğini göstermektedir — bu da onu IELTS Konuşma hazırlığı ve gerçek dünya İngilizce iletişimi için en etkili yöntemlerden biri yapar.

Shadowing tekniği: adım adım eksiksiz rehberi okuyun →