Shadowing-Übung: 3M™ Clean-Trace™ ATP Monitoring System Environmental Surfaces Sampling - Englisch Sprechen Lernen mit Video

Übungsmodus wählen

Jeder Modus öffnet einen Übungsraum im Vollbild.

25 Sätze
Wenn Sätze zu kurz oder zu lang sind, klicke auf Edit, um sie anzupassen.
1
Hello and welcome to the 3M Lab.
2
In this video, you will learn how to collect a sample from a high-touch
3
surface to measure cleaning efficacy using the 3M CleanTrace ATP monitoring system.
4
You will need a 3M CleanTrace ATP Surface Test UXC and the 3M CleanTrace Luminometer LX25.
5
Before you begin, make sure your surface is dry.
6
When you are ready to collect your sample, remove the Surface Test UXC from the device sleeve, taking care to touch only the blue handle.
7
Do not let the swab touch any surface except that which is to be sampled.
8
Hold the test between thumb and forefinger so you can easily rotate the swab.
9
Touch the swab to the surface you are testing and apply enough pressure to cause the wand to flex.
10
Move your swab in an overlapping zigzag pattern
11
that covers a 10 centimeter by 10 centimeter or a 4 inch by 4 inch square area.
12
During sample collection, rotate the swab to ensure sufficient contact between the swab and the surface being sampled.
13
Continue this process until your full sample is collected.
14
You can activate and measure this test immediately, or you can wait until you have collected multiple surface samples.
15
You have up to four hours to activate surface tests.
16
When you are ready to activate and measure your ATP tests, press the handle down until you feel a click.
17
Grip the top of the test and shake side to side for at least five seconds.
18
Insert the test into the CleanTrace Luminometer LX25 and follow the on-screen prompts to take a measurement.
19
In 10 seconds or less, you'll see the result, a quantitative RLU value and a pass or fail response.
20
If the RLU value is above 250 or above the facility designated threshold,
21
the surface should be re-cleaned and re-tested according to your facility's policies and procedures.
22
You'll follow the same click and shake steps to activate any additional ATP tests
23
and the same steps to measure your results using the luminometer.
24
And always refer to the product manuals or the product's instructions for use.
25
For a system overview and detailed walkthroughs of additional sample collection procedures, visit 3M.com slash cleantrace.

App herunterladen

Alles, was du zum fließenden Sprechen brauchst

KI-AussprachebewertungJeder Satz bewertet
IPA-TrainingJeden Laut meistern
WortschatzBaue deinen Wortschatz auf
VokabelspielSpielend lernen
FOR YOU

Empfohlenes Video

Wortschatz und Sprechhinweise zu dieser Lektion

Diese Sprechübung auf Niveau C1 basiert auf dem Video „3M™ Clean-Trace™ ATP Monitoring System Environmental Surfaces Sampling“. Diese Wörter kommen am häufigsten vor: surface, test, swab, sample, cleantrace. Dieses Video enthält 25 Sätze und 364 Wörter zum Nachsprechen. Der gesprochene Teil dauert 2:34. Der Sprecher spricht gleichmäßig mit etwa 142 Wörtern pro Minute – ein angenehmes Tempo fürs Shadowing. Nur 77 % der Wörter gehören zu den 3.000 häufigsten im Englischen, der Wortschatz ist also anspruchsvoll.

Wichtiger Wortschatz in diesem Video

Die 15 anspruchsvollsten Wörter aus dem Video, mit Aussprache und Bedeutung:

WortAusspracheBedeutung
swab Substantiv/swɒb/Tupfer
activate Verb/ˈæktɪˌveɪt/aktivieren, freischalten
rotate Verb/ˈɹoʊ.teɪt/sich drehen, rotieren
designate Verb/ˈdɛz.ɪɡ.neɪt/bestimmen, kennzeichnen
forefinger Substantiv/ˈfɔɹˌfɪŋ.ɡɚ/Zeigefinger
walkthrough Substantiv/ˈwɔːk.θɹuː/Komplettlösung
zigzag Substantiv/ˈzɪɡ.zæɡ/Zickzack
efficacy Substantiv/ˈɛf.ɪ.kə.si/Wirksamkeit, Wirkungsvermögen
overlap Verb/ˌəʊvəˈlæp/überlappen, überlagern
quantitative Adjektiv/ˈkwɑn.təˌteɪ.tɪv/quantitativ
flex Verb/flɛks/knicken, biegen
prompt Verb/pɹɑmpt/veranlassen, dazu bringen
sleeve Substantiv/sliv/Ärmel
thumb Substantiv/ˈθʌm/Daumen
insert Verb/ɪnˈsɝt/einsetzen, einfügen

Aussprache, auf die du achten solltest

  • Die „th“-Laute: walkthrough /ˈwɔːk.θɹuː/, thumb /ˈθʌm/, threshold /ˈθɹɛʃ(h)oʊld/
  • Die Laute „sh“ und „zh“: threshold /ˈθɹɛʃ(h)oʊld/, measurement /ˈmɛʒ.ə.mənt/
  • Lange Wörter – auf die Betonung achten: efficacy /ˈɛf.ɪ.kə.si/, quantitative /ˈkwɑn.təˌteɪ.tɪv/

Laute, die Deutschsprachigen schwerfallen:

  • /w/ — mit runden Lippen, nicht wie das deutsche „w“ (/v/): swab /swɒb/, walkthrough /ˈwɔːk.θɹuː/, quantitative /ˈkwɑn.təˌteɪ.tɪv/
  • Stimmhafter Auslaut — /b/, /d/, /g/, /z/, /v/ am Wortende nicht verhärten: swab /swɒb/, zigzag /ˈzɪɡ.zæɡ/, quantitative /ˈkwɑn.təˌteɪ.tɪv/, sleeve /sliv/, threshold /ˈθɹɛʃ(h)oʊld/
  • /æ/ — offener als „ä“: activate /ˈæktɪˌveɪt/, zigzag /ˈzɪɡ.zæɡ/, overlap /ˌəʊvəˈlæp/

So übst du mit diesem Video

  1. Höre dir das ganze Video einmal an, ohne zu sprechen, und notiere die Wörter, die du nicht kennst.
  2. Sprich Satz für Satz in normaler Geschwindigkeit nach und wiederhole jeden, bis dein Rhythmus zum Sprecher passt.
  3. Nimm dich auf und vergleiche mit dem Original; achte dabei auf Wörter wie swab, activate, rotate.

Was ist die Shadowing-Technik?

Shadowing ist eine wissenschaftlich fundierte Sprachlerntechnik, die ursprünglich für die professionelle Dolmetscherausbildung entwickelt und durch den Polyglotten Dr. Alexander Arguelles populär gemacht wurde. Die Methode ist einfach aber wirkungsvoll: Du hörst englisches Audio von Muttersprachlern und wiederholst es sofort laut — wie ein Schatten, der dem Sprecher mit nur 1–2 Sekunden Verzögerung folgt. Anders als passives Hören oder Grammatikübungen zwingt Shadowing dein Gehirn und deine Mundmuskulatur, gleichzeitig echte Sprachmuster zu verarbeiten und zu reproduzieren. Studien zeigen, dass es Aussprachegenauigkeit, Intonation, Rhythmus, verbundene Sprache, Hörverständnis und Sprechflüssigkeit signifikant verbessert — was es zu einer der effektivsten Methoden für die IELTS Speaking-Vorbereitung und reale englische Kommunikation macht.

Shadowing-Technik: die vollständige Schritt-für-Schritt-Anleitung lesen →