Shadowing Practice: 3M™ Clean-Trace™ ATP Monitoring System Environmental Surfaces Sampling - Learn English Speaking with Video

Kies een oefenmodus

Elke modus opent een volledig scherm oefenruimte.

25 zinnen
Als zinnen te kort of te lang zijn, klik op Bewerken om ze aan te passen.
1
Hello and welcome to the 3M Lab.
2
In this video, you will learn how to collect a sample from a high-touch
3
surface to measure cleaning efficacy using the 3M CleanTrace ATP monitoring system.
4
You will need a 3M CleanTrace ATP Surface Test UXC and the 3M CleanTrace Luminometer LX25.
5
Before you begin, make sure your surface is dry.
6
When you are ready to collect your sample, remove the Surface Test UXC from the device sleeve, taking care to touch only the blue handle.
7
Do not let the swab touch any surface except that which is to be sampled.
8
Hold the test between thumb and forefinger so you can easily rotate the swab.
9
Touch the swab to the surface you are testing and apply enough pressure to cause the wand to flex.
10
Move your swab in an overlapping zigzag pattern
11
that covers a 10 centimeter by 10 centimeter or a 4 inch by 4 inch square area.
12
During sample collection, rotate the swab to ensure sufficient contact between the swab and the surface being sampled.
13
Continue this process until your full sample is collected.
14
You can activate and measure this test immediately, or you can wait until you have collected multiple surface samples.
15
You have up to four hours to activate surface tests.
16
When you are ready to activate and measure your ATP tests, press the handle down until you feel a click.
17
Grip the top of the test and shake side to side for at least five seconds.
18
Insert the test into the CleanTrace Luminometer LX25 and follow the on-screen prompts to take a measurement.
19
In 10 seconds or less, you'll see the result, a quantitative RLU value and a pass or fail response.
20
If the RLU value is above 250 or above the facility designated threshold,
21
the surface should be re-cleaned and re-tested according to your facility's policies and procedures.
22
You'll follow the same click and shake steps to activate any additional ATP tests
23
and the same steps to measure your results using the luminometer.
24
And always refer to the product manuals or the product's instructions for use.
25
For a system overview and detailed walkthroughs of additional sample collection procedures, visit 3M.com slash cleantrace.

App downloaden

Alles wat je nodig hebt om vloeiend te spreken

AI UitspraakScoor elke zin
IPA OefeningBeheers elk geluid
WoordenschatBouw je woordenschat op
WoordenspelLeren terwijl je speelt
FOR YOU

Aanbevolen Video

Woordenschat en spreektips bij deze les

Deze spreekles op niveau C1 is gebaseerd op de video “3M™ Clean-Trace™ ATP Monitoring System Environmental Surfaces Sampling”. Deze woorden komen het vaakst terug: surface, test, swab, sample, cleantrace. Deze video bevat 25 zinnen en 364 woorden om na te spreken. Het gesproken deel duurt 2:34. De spreker praat in een gelijkmatig tempo van ongeveer 142 woorden per minuut, prettig om te shadowen. Slechts 77% van de woorden hoort bij de 3.000 meest gebruikte Engelse woorden, dus de woordenschat is pittig.

Belangrijke woorden in deze video

De 15 moeilijkste woorden uit de video, met uitspraak en betekenis:

WoordUitspraakBetekenis
swab zelfstandig naamwoord/swɒb/watje, prop
activate werkwoord/ˈæktɪˌveɪt/activeren, aanzetten
rotate werkwoord/ˈɹoʊ.teɪt/roteren, ronddraaien
designate werkwoord/ˈdɛz.ɪɡ.neɪt/bepalen
forefinger zelfstandig naamwoord/ˈfɔɹˌfɪŋ.ɡɚ/wijsvinger
efficacy zelfstandig naamwoord/ˈɛf.ɪ.kə.si/doeltreffendheid
overlap werkwoord/ˌəʊvəˈlæp/bedekken
quantitative bijvoeglijk naamwoord/ˈkwɑn.təˌteɪ.tɪv/kwantitatief
flex werkwoord/flɛks/plooien, buigen
prompt werkwoord/pɹɑmpt/aansporen, aanmoedigen
sleeve zelfstandig naamwoord/sliv/mouw
thumb zelfstandig naamwoord/ˈθʌm/duim
insert werkwoord/ɪnˈsɝt/invoegen
threshold zelfstandig naamwoord/ˈθɹɛʃ(h)oʊld/drempel
measurement zelfstandig naamwoord/ˈmɛʒ.ə.mənt/meting

Uitspraak om op te letten

  • De “th”-klanken: walkthrough /ˈwɔːk.θɹuː/, thumb /ˈθʌm/, threshold /ˈθɹɛʃ(h)oʊld/
  • De klanken “sh” en “zh”: threshold /ˈθɹɛʃ(h)oʊld/, measurement /ˈmɛʒ.ə.mənt/
  • Lange woorden — let op de klemtoon: efficacy /ˈɛf.ɪ.kə.si/, quantitative /ˈkwɑn.təˌteɪ.tɪv/

Klanken die Nederlandstaligen lastig vinden:

  • Stemhebbende eindmedeklinker — /b/, /d/, /g/, /z/, /v/ niet verscherpen: swab /swɒb/, zigzag /ˈzɪɡ.zæɡ/, quantitative /ˈkwɑn.təˌteɪ.tɪv/, sleeve /sliv/, threshold /ˈθɹɛʃ(h)oʊld/
  • /æ/ — opener dan de Nederlandse “e”: activate /ˈæktɪˌveɪt/, zigzag /ˈzɪɡ.zæɡ/, overlap /ˌəʊvəˈlæp/
  • /g/ — een harde plofklank, geen Nederlandse “g”: designate /ˈdɛz.ɪɡ.neɪt/, forefinger /ˈfɔɹˌfɪŋ.ɡɚ/, zigzag /ˈzɪɡ.zæɡ/

Zo oefen je met deze video

  1. Luister de hele video één keer zonder te spreken en noteer de woorden die je niet kent.
  2. Spreek zin voor zin na op normale snelheid en herhaal elke zin tot je ritme gelijk is aan dat van de spreker.
  3. Neem jezelf op en vergelijk met het origineel; let daarbij op woorden als swab, activate, rotate.

Wat is de Shadowing-techniek?

Shadowing is een wetenschappelijk onderbouwde taalleermethode die oorspronkelijk is ontwikkeld voor professionele tolkentraining en gepopulariseerd door polyglot Dr. Alexander Arguelles. De methode is eenvoudig maar krachtig: je luistert naar native Engelse audio en herhaalt het onmiddellijk hardop — als een schaduw die de spreker volgt met slechts 1–2 seconden vertraging. In tegenstelling tot passief luisteren of grammaticadrills, dwingt shadowing je hersenen en mondspieren om echte spraakpatronen tegelijkertijd te verwerken en te reproduceren. Onderzoek toont aan dat het de uitspraaknauwkeurigheid, intonatie, ritme, verbonden spraak, luisterbegrip en spreekvaardigheid aanzienlijk verbetert — waardoor het een van de meest effectieve methoden is voor IELTS Speaking-voorbereiding en echte Engelse communicatie.

Shadowing-techniek: lees de volledige stap-voor-stap-gids →