Shadowing Practice: 3M™ Clean-Trace™ ATP Monitoring System Environmental Surfaces Sampling - Learn English Speaking with Video

Bir pratik modu seçin

Her mod tam ekran bir pratik odası açar.

25 cümleler
Cümleler çok kısa veya çok uzun ise, ayarlamak için Düzenle'ye tıklayın.
1
Hello and welcome to the 3M Lab.
2
In this video, you will learn how to collect a sample from a high-touch
3
surface to measure cleaning efficacy using the 3M CleanTrace ATP monitoring system.
4
You will need a 3M CleanTrace ATP Surface Test UXC and the 3M CleanTrace Luminometer LX25.
5
Before you begin, make sure your surface is dry.
6
When you are ready to collect your sample, remove the Surface Test UXC from the device sleeve, taking care to touch only the blue handle.
7
Do not let the swab touch any surface except that which is to be sampled.
8
Hold the test between thumb and forefinger so you can easily rotate the swab.
9
Touch the swab to the surface you are testing and apply enough pressure to cause the wand to flex.
10
Move your swab in an overlapping zigzag pattern
11
that covers a 10 centimeter by 10 centimeter or a 4 inch by 4 inch square area.
12
During sample collection, rotate the swab to ensure sufficient contact between the swab and the surface being sampled.
13
Continue this process until your full sample is collected.
14
You can activate and measure this test immediately, or you can wait until you have collected multiple surface samples.
15
You have up to four hours to activate surface tests.
16
When you are ready to activate and measure your ATP tests, press the handle down until you feel a click.
17
Grip the top of the test and shake side to side for at least five seconds.
18
Insert the test into the CleanTrace Luminometer LX25 and follow the on-screen prompts to take a measurement.
19
In 10 seconds or less, you'll see the result, a quantitative RLU value and a pass or fail response.
20
If the RLU value is above 250 or above the facility designated threshold,
21
the surface should be re-cleaned and re-tested according to your facility's policies and procedures.
22
You'll follow the same click and shake steps to activate any additional ATP tests
23
and the same steps to measure your results using the luminometer.
24
And always refer to the product manuals or the product's instructions for use.
25
For a system overview and detailed walkthroughs of additional sample collection procedures, visit 3M.com slash cleantrace.

Uygulamayı İndir

Akıcı konuşmak için ihtiyacınız olan her şey

AI TelaffuzHer cümleyi puanla
IPA AlıştırmasıHer sesi ustalaştır
Kelime BilgisiKelime bankanızı oluşturun
Kelime OyunuOynarken öğrenin
FOR YOU

Video Öner

Bu dersin kelimeleri ve konuşma notları

Bu C1 seviyesindeki konuşma dersi “3M™ Clean-Trace™ ATP Monitoring System Environmental Surfaces Sampling” videosuna dayanıyor. En çok tekrarlanan kelimeler: surface, test, swab, sample, cleantrace. Bu videoda gölgeleme çalışması için 25 cümle ve 364 kelime var. Konuşma bölümü 2:34 sürüyor. Konuşmacı dakikada yaklaşık 142 kelimelik dengeli bir hızla konuşuyor; gölgeleme için rahat bir tempo. Kelimelerin yalnızca %77’i İngilizcede en sık kullanılan 3.000 kelime arasında, bu yüzden kelime dağarcığı zorlayıcı.

Bu videodaki önemli kelimeler

Videodaki en ileri düzey 10 kelime, telaffuzu ve anlamıyla:

KelimeTelaffuzAnlam
swab isim/swɒb/sıyırma
activate fiil/ˈæktɪˌveɪt/etkinleştirmek
forefinger isim/ˈfɔɹˌfɪŋ.ɡɚ/işaret parmağı
zigzag isim/ˈzɪɡ.zæɡ/zikzak
quantitative sıfat/ˈkwɑn.təˌteɪ.tɪv/kantitatif, nicel
sleeve isim/sliv/kol, yen
thumb isim/ˈθʌm/başparmak
insert fiil/ɪnˈsɝt/sokmak
threshold isim/ˈθɹɛʃ(h)oʊld/eşik
measurement isim/ˈmɛʒ.ə.mənt/ölçüm

Dikkat edilecek telaffuzlar

  • “th” sesleri: walkthrough /ˈwɔːk.θɹuː/, thumb /ˈθʌm/, threshold /ˈθɹɛʃ(h)oʊld/
  • “sh” ve “zh” sesleri: threshold /ˈθɹɛʃ(h)oʊld/, measurement /ˈmɛʒ.ə.mənt/
  • Uzun kelimeler — vurguyu doğru yere koyun: efficacy /ˈɛf.ɪ.kə.si/, quantitative /ˈkwɑn.təˌteɪ.tɪv/

Türkçe konuşanların zorlandığı sesler:

  • /w/ — dudaklar yuvarlak, /v/ değil: swab /swɒb/, walkthrough /ˈwɔːk.θɹuː/, quantitative /ˈkwɑn.təˌteɪ.tɪv/
  • Kelime başındaki ünsüz kümesi — araya ünlü eklemeyin: swab /swɒb/, quantitative /ˈkwɑn.təˌteɪ.tɪv/, flex /flɛks/, prompt /pɹɑmpt/, sleeve /sliv/
  • /æ/ — “e”den daha açık: activate /ˈæktɪˌveɪt/, zigzag /ˈzɪɡ.zæɡ/, overlap /ˌəʊvəˈlæp/

Bu videoyla nasıl çalışılır

  1. Videonun tamamını konuşmadan bir kez dinleyin ve bilmediğiniz kelimeleri not edin.
  2. Normal hızda cümle cümle tekrar edin; ritminiz konuşmacıyla aynı olana kadar her cümleyi yineleyin.
  3. Kendinizi kaydedin ve orijinaliyle karşılaştırın; swab, activate, forefinger gibi kelimelere özellikle dikkat edin.

Gölgeleme Tekniği Nedir?

Gölgeleme, başlangıçta profesyonel tercüman eğitimi için geliştirilen ve çok dilli Dr. Alexander Arguelles tarafından popüler hale getirilen, bilim destekli bir dil öğrenme tekniğidir. Yöntem basit ama güçlüdür: ana dili İngilizce olan bir sesi dinler ve hemen yüksek sesle tekrar edersiniz — konuşmacıyı 1-2 saniye gecikmeyle takip eden bir gölge gibi. Pasif dinleme veya dilbilgisi alıştırmalarının aksine, gölgeleme beyninizi ve ağız kaslarınızı gerçek konuşma kalıplarını eşzamanlı olarak işlemeye ve yeniden üretmeye zorlar. Araştırmalar, telaffuz doğruluğu, tonlama, ritim, bağlı konuşma, dinleme anlama ve konuşma akıcılığını önemli ölçüde geliştirdiğini göstermektedir — bu da onu IELTS Konuşma hazırlığı ve gerçek dünya İngilizce iletişimi için en etkili yöntemlerden biri yapar.

Shadowing tekniği: adım adım eksiksiz rehberi okuyun →