쉐도잉 연습: 3M™ Clean-Trace™ ATP Monitoring System Environmental Surfaces Sampling - 영상으로 영어 말하기 배우기

연습 모드 선택

각 모드는 전체 화면 연습실로 열립니다.

25 문장
문장이 너무 짧거나 길면 Edit를 눌러 조정하세요.
1
Hello and welcome to the 3M Lab.
2
In this video, you will learn how to collect a sample from a high-touch
3
surface to measure cleaning efficacy using the 3M CleanTrace ATP monitoring system.
4
You will need a 3M CleanTrace ATP Surface Test UXC and the 3M CleanTrace Luminometer LX25.
5
Before you begin, make sure your surface is dry.
6
When you are ready to collect your sample, remove the Surface Test UXC from the device sleeve, taking care to touch only the blue handle.
7
Do not let the swab touch any surface except that which is to be sampled.
8
Hold the test between thumb and forefinger so you can easily rotate the swab.
9
Touch the swab to the surface you are testing and apply enough pressure to cause the wand to flex.
10
Move your swab in an overlapping zigzag pattern
11
that covers a 10 centimeter by 10 centimeter or a 4 inch by 4 inch square area.
12
During sample collection, rotate the swab to ensure sufficient contact between the swab and the surface being sampled.
13
Continue this process until your full sample is collected.
14
You can activate and measure this test immediately, or you can wait until you have collected multiple surface samples.
15
You have up to four hours to activate surface tests.
16
When you are ready to activate and measure your ATP tests, press the handle down until you feel a click.
17
Grip the top of the test and shake side to side for at least five seconds.
18
Insert the test into the CleanTrace Luminometer LX25 and follow the on-screen prompts to take a measurement.
19
In 10 seconds or less, you'll see the result, a quantitative RLU value and a pass or fail response.
20
If the RLU value is above 250 or above the facility designated threshold,
21
the surface should be re-cleaned and re-tested according to your facility's policies and procedures.
22
You'll follow the same click and shake steps to activate any additional ATP tests
23
and the same steps to measure your results using the luminometer.
24
And always refer to the product manuals or the product's instructions for use.
25
For a system overview and detailed walkthroughs of additional sample collection procedures, visit 3M.com slash cleantrace.

앱 다운로드

유창하게 말하는 데 필요한 모든 것

AI 발음 평가문장마다 점수 확인
IPA 발음 연습모든 소리 마스터
단어 학습나만의 단어장 만들기
단어 게임놀면서 외우기
FOR YOU

추천 영상

이 레슨의 어휘와 말하기 포인트

이 C1 수준 말하기 레슨은 영상 “3M™ Clean-Trace™ ATP Monitoring System Environmental Surfaces Sampling”을(를) 바탕으로 합니다. 가장 자주 반복되는 단어는 다음과 같습니다: surface, test, swab, sample, cleantrace. 이 영상에는 섀도잉할 문장 25개와 단어 364개가 있습니다. 말하는 구간의 길이는 2:34입니다. 화자는 분당 약 142단어의 일정한 속도로 말해서 섀도잉하기에 편한 속도입니다. 영어에서 가장 많이 쓰이는 3,000단어에 속하는 단어가 77%뿐이라 어휘가 어려운 편입니다.

이 영상의 핵심 어휘

영상에서 가장 어려운 단어 9개를 발음, 뜻과 함께 정리했습니다.

단어발음뜻
forefinger 명사/ˈfɔɹˌfɪŋ.ɡɚ/검지, 집게손가락
walkthrough 명사/ˈwɔːk.θɹuː/공략
zigzag 명사/ˈzɪɡ.zæɡ/갈지자, 지그재그
prompt 동사/pɹɑmpt/부추기다
sleeve 명사/sliv/소매
thumb 명사/ˈθʌm/엄지, 엄지손가락
insert 동사/ɪnˈsɝt/삽입하다, 넣다
threshold 명사/ˈθɹɛʃ(h)oʊld/문턱, 문지방
measurement 명사/ˈmɛʒ.ə.mənt/측정

주의할 발음

  • “th” 소리: walkthrough /ˈwɔːk.θɹuː/, thumb /ˈθʌm/, threshold /ˈθɹɛʃ(h)oʊld/
  • “sh”와 “zh” 소리: threshold /ˈθɹɛʃ(h)oʊld/, measurement /ˈmɛʒ.ə.mənt/
  • 긴 단어 — 강세 위치에 주의: efficacy /ˈɛf.ɪ.kə.si/, quantitative /ˈkwɑn.təˌteɪ.tɪv/

한국어 화자가 어려워하는 소리:

  • /f/ — ㅍ(/p/)으로 바꾸지 말고 윗니를 아랫입술에 대기: forefinger /ˈfɔɹˌfɪŋ.ɡɚ/, efficacy /ˈɛf.ɪ.kə.si/, flex /flɛks/
  • /v/ — ㅂ(/b/)과 구별하기: activate /ˈæktɪˌveɪt/, overlap /ˌəʊvəˈlæp/, quantitative /ˈkwɑn.təˌteɪ.tɪv/, sleeve /sliv/
  • /z/ — ㅈ이 아니라 성대를 울리는 /s/: designate /ˈdɛz.ɪɡ.neɪt/, zigzag /ˈzɪɡ.zæɡ/

이 영상으로 연습하는 방법

  1. 먼저 말하지 않고 영상을 끝까지 듣고 모르는 단어를 적어 둡니다.
  2. 보통 속도로 한 문장씩 섀도잉하고, 화자의 리듬과 맞을 때까지 반복합니다.
  3. 자신의 목소리를 녹음해 원본과 비교하고, forefinger, walkthrough, zigzag 같은 단어에 특히 주의합니다.

쉐도잉이란? 영어 실력을 빠르게 키우는 과학적 방법

쉐도잉(Shadowing)은 원래 전문 통역사 훈련을 위해 개발된 언어 학습 기법으로, 다언어 학자인 Dr. Alexander Arguelles에 의해 대중화된 방법입니다. 핵심 원리는 간단하지만 매우 강력합니다: 원어민의 영어를 들으면서 1~2초의 짧은 지연으로 즉시 소리 내어 따라 말하는 것——마치 '그림자(shadow)'처럼 화자를 따라가는 것입니다. 문법 공부나 수동적인 청취와 달리, 쉐도잉은 뇌와 입 근육이 동시에 실시간으로 영어를 처리하고 재현하도록 훈련합니다. 연구에 따르면 이 방법은 발음 정확도, 억양, 리듬, 연음, 청취력, 말하기 유창성을 크게 향상시킵니다. IELTS 스피킹 준비와 자연스러운 영어 소통을 원하는 분들에게 특히 효과적입니다.

섀도잉 방법: 단계별 전체 가이드 읽기 →