Shadowing Practice: 3M™ Clean-Trace™ ATP Monitoring System Environmental Surfaces Sampling - Learn English Speaking with Video

בחר מצב תרגול

כל מצב פותח חדר תרגול במסך מלא.

25 משפטים
אם המשפטים קצרים או ארוכים מדי, לחץ על ערוך כדי להתאים אותם.
1
Hello and welcome to the 3M Lab.
2
In this video, you will learn how to collect a sample from a high-touch
3
surface to measure cleaning efficacy using the 3M CleanTrace ATP monitoring system.
4
You will need a 3M CleanTrace ATP Surface Test UXC and the 3M CleanTrace Luminometer LX25.
5
Before you begin, make sure your surface is dry.
6
When you are ready to collect your sample, remove the Surface Test UXC from the device sleeve, taking care to touch only the blue handle.
7
Do not let the swab touch any surface except that which is to be sampled.
8
Hold the test between thumb and forefinger so you can easily rotate the swab.
9
Touch the swab to the surface you are testing and apply enough pressure to cause the wand to flex.
10
Move your swab in an overlapping zigzag pattern
11
that covers a 10 centimeter by 10 centimeter or a 4 inch by 4 inch square area.
12
During sample collection, rotate the swab to ensure sufficient contact between the swab and the surface being sampled.
13
Continue this process until your full sample is collected.
14
You can activate and measure this test immediately, or you can wait until you have collected multiple surface samples.
15
You have up to four hours to activate surface tests.
16
When you are ready to activate and measure your ATP tests, press the handle down until you feel a click.
17
Grip the top of the test and shake side to side for at least five seconds.
18
Insert the test into the CleanTrace Luminometer LX25 and follow the on-screen prompts to take a measurement.
19
In 10 seconds or less, you'll see the result, a quantitative RLU value and a pass or fail response.
20
If the RLU value is above 250 or above the facility designated threshold,
21
the surface should be re-cleaned and re-tested according to your facility's policies and procedures.
22
You'll follow the same click and shake steps to activate any additional ATP tests
23
and the same steps to measure your results using the luminometer.
24
And always refer to the product manuals or the product's instructions for use.
25
For a system overview and detailed walkthroughs of additional sample collection procedures, visit 3M.com slash cleantrace.

הורד אפליקציה

כל מה שאתה צריך כדי לדבר בשטף

הגיית AIציון לכל משפט
תרגול IPAשלוט בכל צליל
אוצר מיליםבנה את מאגר המילים שלך
משחק אוצר מיליםלמד תוך כדי משחק
FOR YOU

המלץ על סרטון

אוצר מילים והערות הגייה לשיעור הזה

שיעור הדיבור הזה ברמה C1 מבוסס על הסרטון “3M™ Clean-Trace™ ATP Monitoring System Environmental Surfaces Sampling”. המילים שחוזרות הכי הרבה: surface, test, swab, sample, cleantrace. בסרטון הזה יש 25 משפטים ו-364 מילים לתרגול Shadowing. הדיבור נמשך 2:34. הדובר שומר על קצב יציב של כ-142 מילים בדקה, קצב נוח לתרגול Shadowing. רק 77% מהמילים נמצאות בין 3,000 המילים הנפוצות ביותר באנגלית, כך שאוצר המילים מאתגר.

אוצר מילים מרכזי בסרטון הזה

8 המילים המתקדמות ביותר בסרטון, עם ההגייה והמשמעות שלהן:

מילההגייהמשמעות
forefinger שם עצם/ˈfɔɹˌfɪŋ.ɡɚ/אצבע מורה
walkthrough שם עצם/ˈwɔːk.θɹuː/בהדרכה
zigzag שם עצם/ˈzɪɡ.zæɡ/זיגזג
sleeve שם עצם/sliv/שַׁרְוּול
thumb שם עצם/ˈθʌm/אגודל
insert פועל/ɪnˈsɝt/לְהַכְנִיס
threshold שם עצם/ˈθɹɛʃ(h)oʊld/סַף, מִפְתָּן
measurement שם עצם/ˈmɛʒ.ə.mənt/מְדִידָה

הגייה ששווה לשים לב אליה

  • הצלילים של “th”: walkthrough /ˈwɔːk.θɹuː/, thumb /ˈθʌm/, threshold /ˈθɹɛʃ(h)oʊld/
  • הצלילים של “sh” ו-“zh”: threshold /ˈθɹɛʃ(h)oʊld/, measurement /ˈmɛʒ.ə.mənt/
  • מילים ארוכות — שימו לב להטעמה: efficacy /ˈɛf.ɪ.kə.si/, quantitative /ˈkwɑn.təˌteɪ.tɪv/

צלילים שדוברי עברית מתקשים בהם:

  • /w/ — שפתיים מעוגלות, לא /v/: swab /swɒb/, walkthrough /ˈwɔːk.θɹuː/, quantitative /ˈkwɑn.təˌteɪ.tɪv/
  • /æ/ — פתוח יותר מה-“אֶ” העברית, לא כמו “a” ב-“cup”: activate /ˈæktɪˌveɪt/, zigzag /ˈzɪɡ.zæɡ/, overlap /ˌəʊvəˈlæp/
  • /r/ — הלשון לא נוגעת בשום מקום, לא ה-“ר” הגרונית: rotate /ˈɹoʊ.teɪt/, forefinger /ˈfɔɹˌfɪŋ.ɡɚ/, walkthrough /ˈwɔːk.θɹuː/, prompt /pɹɑmpt/, threshold /ˈθɹɛʃ(h)oʊld/

איך לתרגל עם הסרטון הזה

  1. הקשיבו לכל הסרטון פעם אחת בלי לדבר, ורשמו את המילים שאתם לא מכירים.
  2. תרגלו Shadowing משפט אחר משפט במהירות רגילה, וחזרו על כל משפט עד שהקצב שלכם תואם את הדובר.
  3. הקליטו את עצמכם והשוו למקור, תוך תשומת לב למילים כמו forefinger, walkthrough, zigzag.

מהי טכניקת השאדואינג?

שאדואינג היא טכניקת למידת שפה מבוססת מדע שפותחה במקור להכשרת מתורגמנים מקצועיים ופופולרית על ידי הפוליגלוט ד"ר אלכסנדר ארגואלס. השיטה פשוטה אך עוצמתית: אתה מקשיב לאודיו באנגלית ילידית וחוזר עליו בקול רם מיד — כמו צל העוקב אחרי הדובר עם עיכוב של 1–2 שניות בלבד. בניגוד להאזנה פסיבית או תרגילי דקדוק, שאדואינג מכריח את המוח והשרירים בפה לעבד ולשחזר דפוסי דיבור אמיתיים בו זמנית. מחקרים מראים שזה משפר משמעותית את דיוק ההגייה, האינטונציה, הקצב, הדיבור המחובר, הבנת השמיעה ושטף הדיבור — מה שהופך אותו לאחת השיטות היעילות ביותר להכנה לIELTS Speaking ולתקשורת באנגלית בעולם האמיתי.

טכניקת Shadowing: קרא את המדריך המלא שלב אחר שלב →