Shadowing Practice: Types of Proximity Sensors! #automation #engineering #science #robotics #electronics - Learn English Speaking with Video

Elige un modo de práctica

Cada modo abre una sala de práctica a pantalla completa.

19 oraciones
Si las oraciones son demasiado cortas o largas, haz clic en Editar para ajustarlas.
1
In automation, detecting part presence is pretty important, and this is most commonly done with proximity sensors.
2
Even within this part category, there are some important distinctions you should know about.
3
Firstly, because they use invisible light beams and they're sweet, let's talk about infrared sensors.
4
I've got two different types here.
5
This all-in-one style is a diffuse-style sensor, which emits the infrared light and looks for it bouncing back all in the same little tube.
6
Super easy to use and mount.
7
Downside is it can be less accurate in outdoor environments or with shiny and dark parts.
8
The other form of infrared sensor is a through beam sensor, and these are usually two pieces, with the emitter on one side of your conveyor or detection zone, and a receiver on the other.
9
They're a little more complicated to set up than the single unit, but much more reliable too.
10
These little fellas are inductive sensors, meaning they can only see metal or things that have inductive current.
11
You can run cardboard or plastic by these without detecting anything, because they're only useful for detecting metal.
12
Lastly, the capacitive style sensors can see a lot more and even be used to detect powders or liquids, with the trade-off being they can actually be too sensitive
13
and often need their sensitivity dialed back down a bit with a potentiometer to reduce noise.
14
One more pro gamer tip, pretty much all of these sensors can be found in PNP or NPN arrangement.
15
You can either source 24 volts to your PLC with a PNP sensor
16
or sync back to 0 volts with an NPN sensor.
17
Most digital input cards on a PLC can only handle one or the other.
18
Make sure you buy a sensor to match your card.
19
So which one of these sensors do you think is the right call for detecting components on our conveyor system?

Descargar app

Todo lo que necesitas para hablar con fluidez

Pronunciación con IAEvalúa cada oración
Práctica de IPADomina cada sonido
VocabularioConstruye tu banco de palabras
Juego de vocabularioAprende mientras juegas

Mismo canal

FOR YOU

Recomendar Video

Vocabulario y notas de pronunciación para esta lección

Este vídeo tiene 19 frases y 319 palabras para practicar shadowing. La parte hablada dura 1:36. El hablante habla rápido, unas 200 palabras por minuto, así que espera sonidos enlazados y reducidos. Solo el 75 % de las palabras está entre las 3.000 más comunes del inglés, por lo que el vocabulario es exigente.

Vocabulario clave de este vídeo

15 palabras del vídeo que vale la pena aprender, con su pronunciación y significado:

PalabraPronunciaciónSignificado
sensor sustantivo/ˈsɛn.sɚ/sensor
detect verbo/dɪˈtɛkt/detectar
infrared adjetivo/ˌɪnfɹəˈɹɛd/infrarrojo, ultrarrojo
beam sustantivo/ˈbiːm/viga
complicated adjetivo/ˈkɑm.plɪˌkeɪ.tɪd/complicado
mount verbo/maʊnt/montar, cabalgar
sensitive adjetivo/ˈsɛn.sɪt.ɪv/sensible
liquid sustantivo/ˈlɪk.wɪd/líquido
commonly adverbio/ˈkɑmənli/comúnmente
tube sustantivo/tuːb/tubo, chisguete
input sustantivo/ˈɪnpʊt/aportación, aporte
component sustantivo/kəmˈpoʊ.nənt/componente
reliable adjetivo/ɹɪˈlaɪəbl̩/fiable, confiable
arrangement sustantivo/əˈɹeɪnd͡ʒmənt/arreglo, arreglada
powder sustantivo/ˈpaʊ.dɚ/polvo

Phrasal verbs que vas a escuchar

PalabraSignificado
back down verborecular, echarse atrás

Gramática en este vídeo

Las estructuras que más usa el hablante, con las palabras exactas del vídeo:

EstructuraEn el vídeo
Voz pasiva be + participio pasado — importa lo que ocurre, no quién lo hacecan be found

Pronunciación a tener en cuenta

El hablante usa 4 contracciones y formas reducidas, como they're, I've. Dilas en su forma corta, tal como las oyes.

  • Los sonidos de “sh” y “zh”: distinction /dɪˈstɪŋkʃən/, detection /dɪˈtɛk.ʃən/, automation /ˌɔ.təˈmeɪ.ʃən/, potentiometer /pəˌtɛn(t)ʃiˈɑmɪtəɹ/
  • Palabras largas — cuida el acento: complicated /ˈkɑm.plɪˌkeɪ.tɪd/, invisible /ɪnˈvɪzəb(ə)l/, sensitivity /ˌsɛn.səˈtɪv.ə.ti/, proximity /pɹɒkˈsɪm.ɪ.ti/, automation /ˌɔ.təˈmeɪ.ʃən/

Cómo practicar con este vídeo

  1. Escucha el vídeo entero una vez sin hablar y anota las palabras que no conoces.
  2. Empieza a velocidad 0,75×, haz shadowing frase por frase y vuelve a la velocidad normal cuando te resulte fácil.
  3. Grábate y compara con el original, prestando atención a palabras como sensor, detect, infrared.

¿Qué es la Técnica de Shadowing?

Shadowing es una técnica de aprendizaje de idiomas respaldada por la ciencia, desarrollada originalmente para la formación de intérpretes profesionales y popularizada por el políglota Dr. Alexander Arguelles. El método es simple pero poderoso: escuchas audio en inglés nativo y lo repites en voz alta de inmediato, como una sombra que sigue al hablante con solo 1-2 segundos de retraso. A diferencia de la escucha pasiva o los ejercicios de gramática, el shadowing obliga a tu cerebro y músculos de la boca a procesar y reproducir simultáneamente patrones de habla reales. Las investigaciones muestran que mejora significativamente la precisión de la pronunciación, la entonación, el ritmo, el habla conectada, la comprensión auditiva y la fluidez al hablar, convirtiéndola en una de las metodologías más efectivas para la preparación del IELTS Speaking y la comunicación en inglés en el mundo real.

Técnica de shadowing: lee la guía completa paso a paso →