Shadowing Practice: Engineer's tool list - Learn English Speaking with Video
Creando lección...
1
Welcome to my latest video on learning technical and engineering English.
2
Today what I'm going to do is I'm going to go through some of the tools that are used in engineering
3
and I'll tell you the tools in English with a little explanation of how they're used.
4
So the first tool is a veneer caliper and the veneer caliper is to measure internal and external sizes
5
and here you can see the internal and external calipers.
6
External micrometer.
7
The external or outside micrometer is to measure outside sizes or diameters.
8
Internal micrometer.
9
Engineers use the internal micrometer to measure inside diameters.
10
Depth micrometer.
11
Engineers use the depth gauge micrometer to measure depths or how deep something is.
12
Dial gauge.
13
A dial gauge is to measure distance.
14
The measurement is on a clock called a dial.
15
Height gauge.
16
Height gauge is to measure the height of something, how high it is.
17
It is also used to mark an object object.
18
Surface table.
19
A surface table is a solid flat table used as the main horizontal reference for precision measurement marking or inspection.
20
Steel ruler.
21
Steel rulers are to measure distances or to rule straight lines.
22
Engineer squares.
23
An engineer square is to check a work piece is square, that is that two sides are at 90 degrees to one another.
24
Straight edge.
25
Straight edge is to check that surfaces are straight.
26
Scribing block.
27
Scribing block is used to check flat surfaces and to find the centre of the round bars.
28
Trammel or trammels.
29
Engineers trammel heads are for scribing arcs and circles.
30
Protractor.
31
Most protractors measure angles in degrees.
32
Ascriber.
33
Ascriber is a hand tool used in metalwork to mark lines on work pieces before you machine the piece.
34
V-block.
35
A V-block is to secure round or cylindrical items or work pieces.
36
Parallels.
37
Parallels are to support and accurately set jobs in vice or bolted to the machine table.
38
Angle plates.
39
Angle plates are used to hold a workpiece for marking or measuring.
40
Dividers.
41
Dividers are used for scribing circles on metal also used for measuring distances of markings.
42
Center punch.
43
A A center punch is to make small points used as markers for drilling.
44
Okay, so that's a list of some of the most used tools in engineering.
45
Stay tuned because the video will now give you a multi-choice quiz
46
so you can test to see what you've learned or can remember.
47
So, welcome to Engineering Tools Part 1, Multiple Choice Quiz.
48
This is where I'll show you a picture and ask you what the tool is.
49
You'll have a choice of three.
50
Before the answer is given, there is a short pause.
51
But if you need more time, of course, pause the video.
52
What's the name of this tool?
53
Micrometer, veneer caliper, depth gauge.
54
The answer is veneer caliper.
55
What's this called?
56
Dividers, protractor, steel rule.
57
The answer is a steel rule.
58
What are these?
59
Veneer calipers, trammels, dividers.
60
The answer is trammels.
61
What is this?
62
Depth micrometer, external micrometer, internal micrometer.
63
The answer is internal micrometer.
64
What's this tool called?
65
Dial gauge, depth gauge, height gauge.
66
This, the answer is, is dial gauge.
67
What's this tool?
68
Scribing block, height gauge, depth gauge.
69
The answer is height gauge.
70
What's this called?
71
Surface table, square, straight edge.
72
The answer is surface table.
73
What's the name of this tool?
74
Square, straight edge, steel ruler.
75
The answer is square.
76
What are these called?
77
Straight edges, steel rulers, parallels.
78
These are straight edges.
79
What's this called?
80
A height gauge, trammel, scribing block.
81
The answer is scribing block.
82
What's this?
83
Protractor, square, dividers.
84
The answer is protractor.
85
What's this tool?
86
Center punch, protractor, scriber.
87
The answer is scriber.
88
What are these?
89
V-blocks, parallels, angle plates.
90
The answer is V-blocks.
91
What are these?
92
Angle plates, straight edges, parallels.
93
These are parallels.
94
What's this?
95
Surface table, angle plate, B block.
96
The answer is angle plate.
97
What's this?
98
Dividers, scriber, protractor.
99
The answer is dividers.
100
This tool is Describer, Dividers, Centre Punch.
101
The answer is Centre Punch.
102
That's the end of the quiz.
103
I hope you enjoyed it.
104
Remember to do things again and again is the best way to learn and remember.
105
So why not do the test again?
106
Or watch the whole video again.
107
Thanks for watching.
📺 Mismo canal
✨ Recomendar Video
B11
51 oraciones
Unlocking Architectural Marvels | Essential English Vocabulary Words for Buildings! #learnenglish
University StudentsBusiness English+1
B189 oraciones
Speak English Like a Native — Job Interviews and Strengths | B1 · Intermediate
University StudentsBusiness English+2
B21
112 oraciones
5 Things Under $20 Every ARCHITECT Needs
University StudentsBusiness English+1
B11
267 oraciones
شرح انجليزي: الوظائف والمهن ومعرض التوظيف | كورس أهم 5000 كلمة
University StudentsBusiness English+2
B22
261 oraciones
Your Life as Every Industrial Engineer Rank
University StudentsBusiness English+1
B21
237 oraciones
Master Cooking In Under 20 Minutes
University StudentsBusiness English+2
B14
5 oraciones
Making a tiny Smart Level ⚖️
University StudentsBusiness English+1
B11
27 oraciones
A Dream Job
High School StudentsUniversity Students+3
B18
104 oraciones
Making Things Again | practice English with Spotlight
High School StudentsUniversity Students+3
B21
247 oraciones
"This Doesn't Lie" | Build Your Own English Level Checker with Google AI Studio
University StudentsBusiness English+1
Sobre esta lección
¿Qué es la Técnica de Shadowing?
Shadowing es una técnica de aprendizaje de idiomas respaldada por la ciencia, desarrollada originalmente para la formación de intérpretes profesionales y popularizada por el políglota Dr. Alexander Arguelles. El método es simple pero poderoso: escuchas audio en inglés nativo y lo repites en voz alta de inmediato, como una sombra que sigue al hablante con solo 1-2 segundos de retraso. A diferencia de la escucha pasiva o los ejercicios de gramática, el shadowing obliga a tu cerebro y músculos de la boca a procesar y reproducir simultáneamente patrones de habla reales. Las investigaciones muestran que mejora significativamente la precisión de la pronunciación, la entonación, el ritmo, el habla conectada, la comprensión auditiva y la fluidez al hablar, convirtiéndola en una de las metodologías más efectivas para la preparación del IELTS Speaking y la comunicación en inglés en el mundo real.